NSF Certified Products - Biosafety Cabinetry
These Listings were Last Updated on Friday, November 20, 2009 at 4:15 AM Eastern Time.
Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Warning: NSF is concerned about fraudulent downloading and manipulation of website text. If you have received this listing in hard copy, always confirm this certification/listing information by going directly to http://www.nsf.org/Certified/Biosafety/Listings.asp? for the latest most accurate information.

NSF/ANSI STANDARD 49
Class II (Laminar Flow) Biosafety Cabinetry

Cabinet Style
A = Bench Unit With Base or Adjustable Legs Provided
B = Bench Unit Without Base or Adjustable Legs Provided
C = Console		 Window Type
H = Hinged
S = Sliding
F = Fixed		 Bench Height
NA = Not Applicable
NP = Not Provided

CBV = Concurrent Balance Value

Due to a change in nomenclature in NSF/ANSI 49 - 2002 “Class II (Laminar Flow) Biosafety Cabinetry,” Class II, Type A cabinets are now referred to as Class II, Type A1 and Class II, Types B3 and A/B3 cabinets as Class II, Type A2. Class II, Types B1 and B2 cabinets remain unchanged.


 
ALLENTOWN, INC. 
ROUTE 526
P.O. BOX 698 
ALLENTOWN, NJ 08501-0698 
609-259-7951
Visit this company's website
Facility : # 1 USA

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
34850 Safety Cabinet[1] [2] A2 A 100 - 110 50 - 60 N/A 4 10S 36 Casters
I.V. Pole
U.V. Light
34860 Safety Cabinet[1] [3] A2 A 100 - 110 50 - 60 N/A 6 10S 36 Casters
I.V. Pole
U.V. Light		 

[1] The first four digits of the serial number refer to date of manufacture.
[2] Beginning with serial number 070570504.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[3] Beginning with serial number 070570502.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.


 
BAKER COMPANY, INC. (THE) 
SANFORD AIRPORT
P.O. DRAWER E 
SANFORD, ME 04073 
800-992-2537 
207-324-8773
Visit this company's website
Facility : SANFORD, ME

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
NCB-D4[1] [2] B1 C 100 - 110 80 - 90
70 - 80		 437 @ 1.5 4 12S NA I.V. Pole
U.V. Light
NCB-D4[1] [3] B1 C 100 - 110 63 - 73
55 - 65		 295 @ 0.8 4 8S NA I.V. Pole
U.V. Light
NCB-D6[1] [4] B1 C 100 - 110 80 - 90
70 - 80		 666 @ 1.8 6 12S NA I.V. Pole
U.V. Light
NCB-D6[1] [5] B1 C 100 - 110 63 - 73
55 - 65		 463 @ 0.9 6 8S NA I.V. Pole
U.V. Light
SG 403A[1] [6] A2 A 100 - 110 50 - 60
45 - 55		 N/A 4 8S 37 U.V. Light
I.V. Pole
Armrest
Casters
SG 403A[1] [7] A2 A 100 - 110 53 - 63
45 - 55		 N/A 4 10S 37 U.V. Light
I.V. Pole
Armrest
Casters
SG 403A HE[1] [8] A2 A 100 - 110 45 - 55
42 - 52		 N/A 4 8S 37 I.V. Pole
U.V. Light
SG 403A HE[1] [9] A2 A 100 - 110 47 - 57
40 - 50		 N/A 4 10S 37 I.V. Pole
U.V. Light
SG 403A TX[1] [10] B2 A 100 - 110 52 - 62
47 - 57		 860 @ 1.7 4 8S 37 I.V. Pole
U.V. Light
SG 503A HE[1] [11] A2 A 100 - 110 53 - 63
46 - 56		 N/A 5 12S 37 Casters
I.V. Pole
U.V. Light
SG 503A HE[1] [12] A2 A 100 - 110 50 - 60
48 - 58		 N/A 5 8S 37 Casters
I.V. Pole
U.V. Light
SG 603A[1] [13] A2 A 100 - 110 50 - 60
47 - 57		 N/A 6 10S 37 U.V. Light
I.V. Pole
Casters
SG 603A[1] [13] A2 A 100 - 110 50 - 60
47 - 57		 N/A 6 8S 37 U.V. Light
I.V. Pole
Casters
SG 603A HE[1] [14] A2 A 100 - 110 47 - 57
40 - 50		 N/A 6 10S 37 I.V. Pole
U.V. Light
SG 603A HE[1] [14] A2 A 100 - 110 47 - 57
40 - 50		 N/A 6 8S 37 I.V. Pole
U.V. Light
SG 603A TX[1] [15] B2 A 100 - 110 45 - 55
43 - 53		 1150 @ 2.0 6 8S 37 I.V. Pole
U.V. Light		 

[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading
    instrument.  This nominal set point was confirmed using the manufacturer's recommended
    alternate calculated method with thermal anemometer in a constricted (3 inch high)
    access opening (consult manufacturer's operator's manual for appropriate correction
    factor, if applicable).
[2] Beginning with serial number 87770.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 75-85 fpm.  The
    acceptable non-uniform downflow ranges beginning with zone 1 at the rear of the work
    area and ending with zone 2 behind the front window are 80-90 fpm (zone 1 - comprised of
    lateral rear and center rows) and 70-80 fpm (zone 2 - comprised of the front lateral
    row).  Uniform and non-uniform nominal set-points were established with I.V. Pole and
    U.V. Light removed.  This cabinet model was Certified to NSF/ANSI 49-2004.  This cabinet
    qualifies only with the armrest installed.
[3] Beginning with serial number 87770.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 60-70 fpm.  The
    acceptable non-uniform downflow ranges beginning with zone 1 at the rear of the work
    area and ending with zone 2 behind the front window are 63-73 fpm (zone 1 - comprised of
    lateral rear and center rows) and 55-65 fpm (zone 2 - comprised of the front lateral
    row).  Uniform and non-uniform nominal set-points were established with the I.V. Pole
    and U.V. Light removed.  This cabinet model was Certified to NSF/ANSI 49-2004.  This
    cabinet qualifies only with the armrest installed.
[4] Beginning with serial number 84960.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 75-85 fpm.  The
    acceptable non-uniform downflow ranges beginning with zone 1 at the rear of the work
    area and ending with the zone 2 behind the front window are 80-90 fpm (zone 1 -
    comprised of lateral rear and center rows) and 70-80 fpm (zone 2 comprised of the front
    lateral row).  Uniform and non-uniform nominal set-points were established with I.V.
    Pole and U.V. Light removed.  This cabinet model was Certified to NSF/ANSI 49-2004. 
    This cabinet qualifies only with the armrest installed.
[5] Beginning with serial number 84960.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 60 - 70 fpm. 
    The acceptable non-uniform downflow ranges beginning with zone 1 at the rear of the work
    area and ending with zone 2 behind the front window are 63-73 fpm (zone 1 - comprised of
    lateral rear and center rows) and 55-65 fpm (zone 2 - comprised of the front lateral
    row).  Uniform and non-uniform nominal set-points were established with the I.V. Pole
    and U.V. Light removed.  This cabinet model was Certified to NSF/ANSI 49-2004.  This
    cabinet qualifies only with the armrest installed.
[6] Beginning with serial number 78977.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 50-60 fpm.  The
    acceptable non-uniform downflow ranges listed above begins with zone 1 (50-60 fpm) at
    the rear of the work area (comprised of lateral rear and center rows) and ending with
    zone 2 (45-55 fpm) (comprised of front lateral row) behind the front window enclosing
    the work area.  Downflow nominal set points were established with the I.V. Pole and U.V.
    Light removed.
[7] Beginning with serial number 78977.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 50-60 fpm.  The
    acceptable non-uniform downflow ranges listed above begins with zone 1 (53-63 fpm) at
    the rear of the work area (comprised of lateral rear and center rows) and ending with
    zone 2 (45-55 fpm) (comprised of front lateral row) behind the front window enclosing
    the work area.  Downflow nominal set points were established with the I.V. Pole and U.V.
    Light removed.
[8] Beginning with serial number 93621.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 45-55 fpm.  The
    acceptable non-uniform downflow ranges listed above begin with zone 1 (45-55 fpm) at the
    rear of the work area (compromised of lateral rear and center rows) and end with zone 2
    (42-52 fpm) (comprised of front lateral row) behind the front window enclosing the work
    area.  Downflow nominal set points were established with the I.V. Pole and U.V. Light
    removed.  This cabinet model was Certified to NSF/ANSI 49-2007.  This cabinet qualifies
    only with the armrest installed.  Cabinet model number suffixes SP and HE INT are
    Certified for alternate motor/blower combinations and input power supply.
[9] Beginning with serial number 93621.  This model qualifies for both uniform and
    non-uniform (zoned) downflow.  The acceptable uniform downflow range is 45-55 fpm.  The
    acceptable non-uniform downflow ranges listed above begin with zone 1 (47-57 fpm) at the
    rear of the work area (compromised of lateral rear and center rows) and end with zone 2
    (40-50 fpm) (comprised of front lateral row) behind the front window enclosing the work
    area.  Downflow nominal set points were established with the I.V. Pole and U.V. Light
    removed.  This cabinet model was Certified to NSF/ANSI 49-2007.  This cabinet qualifies
    only with the armrest installed.  Cabinet model number suffixes SP and HE INT are
    Certified for alternate motor/blower combinations and input power supply.
[10] Beginning with serial number 89049.  This model qualifies for both uniform and
     non-uniform (zoned) downflow.  The acceptable uniform downflow range is 50-60 fpm.  The
     acceptable non-uniform downflow ranges begin with zone 1 (52-62 fpm) at the rear of the
     work area (comprised of lateral rear and center rows) and end with zone 2 (47-57 fpm)
     (comprised of front lateral row) behind the front window enclosing the work area.
     Downflow nominal set points were established with the I.V. Pole and U.V. Light removed. 
     This cabinet model was Certified to NSF/ANSI 49-2004.  This cabinet qualifies only with
     the armrest installed.  This model was tested with the supply blower inlet prefilter
     installed. Cabinet model number suffix INT is Certified for alternate motor/blower
     combinations and inlet power supply.
[11] Beginning with serial number 90883.  This model qualifies for both uniform and
     non-uniform (zoned) downflow.  The acceptable uniform downflow range is 50-60 fpm.  The
     acceptable non-uniform downflow ranges listed above begins with zone 1 (53-63 fpm) at
     the rear of the work area (comprised of lateral rear and center rows) and ending with
     zone 2 (46-56 fpm) (comprised of front lateral row) behind the front window enclosing
     the work area.  Downflow nominal set points were established with the I.V. Pole and U.V.
     Light removed.  This cabinet model was certified to NSF/ANSI 49-2007.  This cabinet
     qualifies only with the armrest installed.   This model was certified with optional
     workarea prefilters installed.  ATS autolift with casters is an additional acceptable
     option.  Cabinet model number suffixes SP and HE INT are certified for alternate motor /
     blower combinations and input power supply.
[12] Beginning with serial number 90883.  This model qualifies for both uniform and
     non-uniform (zoned) downflow.  The acceptable uniform downflow range is 50-60 fpm.  The
     acceptable non-uniform downflow ranges listed above begins with zone 1 (50-60 fpm) at
     the rear of the work area (comprised of lateral rear and center rows) and ending with
     zone 2 (48-58 fpm) (comprised of front lateral row) behind the front window enclosing
     the work area.  Downflow nominal set points were established with the I.V. Pole and U.V.
     Light removed.  This cabinet model was certified to NSF/ANSI 49-2007.  This cabinet
     qualifies only with the armrest installed.   This model was certified with optional
     workarea prefilters installed.  ATS autolift with casters is an additional acceptable
     option.  Cabinet model number suffixes SP and HE INT are certified for alternate motor /
     blower combinations and input power supply.
[13] Beginning with serial number 80047.  This model qualifies for both uniform and
     non-uniform (zoned) downflow.  The acceptable uniform downflow range is 50-60 fpm.  The
     acceptable non-uniform downflow ranges listed above begins with zone 1 (50-60 fpm) at
     the rear of the work area (comprised of lateral rear and center rows) and ending with
     zone 2 (47-57 fpm) (comprised of front lateral row) behind the front window enclosing
     the work area.  Downflow nominal set points were established with the I.V. Pole and U.V.
     Light removed.  This cabinet qualifies only with the armrest installed.
[14] Beginning with serial number 93808.  This model qualifies for both uniform and
     non-uniform (zoned) downflow.  The acceptable uniform downflow range is 45-55 fpm.  The
     acceptable non-uniform downflow ranges listed above begin with zone 1 (47-57 fpm) at the
     rear of the work area (comprised of lateral rear and center rows) and end with zone 2
     (40-50 fpm) (comprised of front lateral row) behind the front window encnet qualifies
     only with the armrest installed.  This model was tested with the supply blower inlet
     prefilter installed.


 
CHC LAB 
520-1 YOUNGSAN-DONG
YUSUNG-GU 
DAEJEON 305-500 
KOREA, REPUBLIC OF 
82 42 933 0036
Facility : DAEJEON, KOREA, REPUBLIC OF

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
CHC-777A2-03[1] [2] A2 A 100 - 110 65 - 75 N/A 3 8S 33 Casters
I.V. Pole
U.V. Light
CHC-777A2-04[1] [2] A2 A 100 - 110 65 - 75 N/A 4 8S 33 Casters
I.V. Pole
U.V. Light
CHC-777A2-06[1] [3] A2 A 100 - 110 65 - 75 N/A 6 8S 33 Casters
I.V. Pole
U.V. Light		 

[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading
    instrument.  This nominal set point was confirmed using the manufacturer's alternate
    method with thermal anemometer in a constricted (3 inch high) access opening (consult
    manufacturer's operator's manual for appropriate correction factor).  Downflow nominal
    set point was established with the U.V. Light removed.  This cabinet model was Certified
    to NSF/ANSI 49-2007.  This cabinet qualifies only with the armrest installed.
[2] Certified for use with power supplies of 115V/60 Hz, 220V/50 Hz, and 220V/60 Hz.
[3] Certified for use with power supplies of 115V/60 Hz and 220V/60 Hz.


 
DALTON CORPORATION 
9 ICHIGAYA SANAI-CHO, SHINJUKU-KU
TOKYO, 162-0846 
JAPAN 
813 3267 2111
Facility : PLYMOUTH, MN

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
NSC-11A/B3-1200[1] A2 A 100 - 110 65 - 75 N/A 4 8S 32 U.V. Light
I.V. Pole		 

[1] Beginning with series 20 and higher.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  A corresponding inflow nominal
    set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's
    recommended alternate method with thermal anemometer in a constricted (3 inch high)
    access opening (consult manufacturer's operator manual for appropriate correction
    factor, if applicable), without adjusting cabinet airflow balance.  Downflow nominal
    set-point of 70 fpm was established in the plane of the window with the I.V. Pole
    removed and U.V. Light installed.  This cabinet qualifies only with the armrest
    installed.  This cabinet was tested and Certified with a power supply of 100V and 50Hz. 
    A corrected downflow nominal set-point of 72 fpm was established 4 inches above the
    plane of the window per NSF/ANSI 49-2002, with the I.V. Pole and U.V. Light removed.


 
ENVIRCO CORPORATION 
101 MCNEILL ROAD
SANFORD, NC 27330 
919-775-2201
Facility : SANFORD, NC

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
10448 EBC 47[1] A2 B 100 - 110 67 - 77
67 - 77
80 - 90
74 - 84		 N/A 4 8H 32 None
10451 EBC 70[2] A2 A 100 - 110 68 - 78
56 - 66		 N/A 6 8H 32 I.V. Pole 

[1] Beginning with serial number 20106022.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  A corresponding nominal set-point
    of 120 fpm was confirmed using the manufacturer's recommended alternate method with
    thermal anemometer above the exhaust filter without adjusting cabinet airflow balance. 
    This model option qualifies for both uniform and non-uniform (zoned) downflow.  The
    acceptable uniform downflow range is 72 - 82 fpm.  The acceptable non-uniform downflow
    ranges listed above begin with Zone 1 at the rear of the work area and end with Zone 4
    behind the window enclosing the work area.  The zone grids are lateral (side-to-side).
[2] Beginning with serial number 20212001.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  A corresponding nominal set-point
    of 120 fpm was confirmed using the manufacturer's recommended alternate method with
    thermal anemometer above the exhaust filter without adjusting cabinet airflow balance. 
    This model option qualifies for both uniform and non-uniform (zoned) downflow.  The
    acceptable uniform downflow range is 65 - 75 fpm (grid comprised of 4 lateral rows). 
    The acceptable non-uniform downflow ranges listed above begin with Zone 1 at the rear of
    the work area (grid comprised of 3 lateral rows) and end with Zone 2 at the front of the
    work area (grid comprised of a single lateral row behind the window enclosing the work
    area).


 
ESCO MICRO PTE LTD (BIOTECH EQUIPMENT DIVISION) 
21 CHANGI SOUTH STREET 1
486777 
SINGAPORE 
65 65420833
Visit this company's website
Facility : BINTAN ISLAND, INDONESIA

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
LA2 4A2[1] A2 A 100 - 110 65 - 75 N/A 4 9S 34 I.V. Pole
U.V. Light
LA2 5A2[5] A2 A 100 - 110 65 - 75 N/A 5 9S 36 I.V. Pole
U.V. Light
LA2 6A2[2] A2 A 100 - 110 60 - 70 N/A 6 8S 35 I.V. Pole
U.V. Light
LB2 4B2[3] B2 A 100 - 110 65 - 75 810 @ 1.9 4 8S 36 I.V. Pole
U.V. Light
LB2 6B2[4] B2 A 100 - 110 65 - 75 1218 @ 2.2 6 8S 36 I.V. Pole
U.V. Light
LR2 4S2[6] A2 A 100 - 110 65 - 75 N/A 4 10S 35 I.V. Pole
U.V. Light
LR2 6S2[7] A2 A 100 - 110 60 - 70 N/A 6 8S 35 I.V. Pole
U.V. Light		 

[1] Beginning with serial number 2004-7329.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 70 fpm was established with I.V. Pole and U.V. Light removed. This
    cabinet model was Certified to NSF/ANSI 49-2004.
[2] Beginning with serial number 2004-8113.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This
    cabinet model was Certified to NSF/ANSI 49-2004.
[3] Beginning with serial number 2005-10005.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 70 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[4] Beginning with serial number 2005-9857.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 70 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[5] Beginning with serial number 2006-14526.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 70 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[6] Inflow nominal set-point of 105 fpm was established with a direct airflow reading
    instrument.  This nominal set point was confirmed using the manufacturer's recommended
    alternate method with thermal anemometer in a constricted (3 inch high) access opening
    (consult manufacturer for appropriate correction factor, if applicable), without
    adjusting cabinet airflow balance.  Downflow nominal set point of 70 fpm was established
    with I.V. Pole and U.V. Light removed.  This cabinet model was Certified to NSF/ANSI
    49-2007.
[7] Beginning with serial number 2008-28898.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2007.


 
FISHER SCIENTIFIC 
112 COLONADE ROAD
OTTAWA, ONTARIO K2E 7L6 
CANADA 
613-228-6285
Facility : # 1 CANADA

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
361004616[2] [3] A2 A 100 - 110 61 - 71 N/A 4 10H 27 I.V. Pole
U.V. Light
361004617[1] [3] A2 A 100 - 110 61 - 71 N/A 6 10H 27 I.V. Pole
U.V. Light
361004618[2] [3] A2 B 100 - 110 61 - 71 N/A 4 10H NA I.V. Pole
U.V. Light
361004619[1] [3] A2 B 100 - 110 61 - 71 N/A 6 10H NA I.V. Pole
U.V. Light
361004620[2] A2 A 100 - 110 61 - 71 N/A 4 10H 27 I.V. Pole
U.V. Light
361004621[1] A2 A 100 - 110 61 - 71 N/A 6 10H 27 I.V. Pole
U.V. Light
361004622[2] A2 B 100 - 110 61 - 71 N/A 4 10H NA I.V. Pole
U.V. Light
361004623[1] A2 B 100 - 110 61 - 71 N/A 6 10H NA I.V. Pole
U.V. Light		 

[1] Inflow nominal set-point of 105 fpm was established with a direct airflow reading
    instrument.  A corresponding nominal set-point of 118 fpm was confirmed using
    manufacturer's recommended alternate method with thermal anemometer above exhaust filter
    without adjusting cabinet airflow balance.  Downflow nominal set-point of 66 fpm was
    established with U.V. Light and I.V. Pole installed.
[2] Inflow nominal set-point of 105 fpm was established with a direct airflow reading
    instrument.  A corresponding nominal set-point of 122 fpm was confirmed using the
    manufacturer's recommended alternate method with thermal anemometer above exhaust filter
    without adjusting cabinet airflow balance.  Downflow nominal set-point of 66 fpm was
    established with U.V. Light and I.V. Pole installed.
[3] This model has an A2 type design clasification.


 
GERMFREE LABORATORIES, INC. 
11 AVIATOR WAY
ORMOND BEACH, FL 32174 
800-888-5357 
386-677-7742
Visit this company's website
Facility : ORMOND BEACH, FL

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
BTE-4[2] B2 A 102 - 112 70 - 80 685 @ 3.6 4 8H NA None
BTE-6[1] B2 A 102 - 112 70 - 80 1078 @ 2.8 6 8H NA None 

[1] Beginning with serial number 6s-15-BT-11214. Inflow nominal set point of 107 fpm was
    established with a direct airflow reading instrument (DIM). A corresponding inflow
    velocity nominal set point of 114 fpm was confirmed using the manufacturer's recommended
    secondary (alternate) method with thermal anemometer in work area for supply air volume
    determination (Annex A, sec.X.C.4.d) and pitot tube in exhaust duct for cabinet total
    exhaust air volume determination, without adjusting cabinet airflow balance. Resultant
    inflow velocity determined by calculation. This cabinet model was Certified to NSF/ANSI
    49 - 2004.
[2] Beginning with serial number 4s-15-BT-11409. Inflow nominal set point of 107 fpm was
    established with a direct airflow reading instrument (DIM). This inflow velocity nominal
    set point was confirmed using the manufacturer's recommended secondary (alternate)
    method with thermal anemometer in work area for supply air volume determination (Annex
    A, sec.X.C.4.d) and pitot tube in exhaust duct for cabinet total exhaust air volume
    determination, without adjusting cabinet airflow balance. Resultant inflow velocity
    determined by calculation. This cabinet model was Certified to NSF/ANSI 49 - 2004.


 
LABCONCO CORPORATION 
8811 PROSPECT
KANSAS CITY, MO 64132 
816-333-8811
Visit this company's website
Facility : KANSAS CITY, MO

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
34300 Logic Series[1] [2] A2 A 100 - 110 50 - 60 N/A 3 10S 36 I.V. Pole
U.V. Light
Casters
34308 Logic Series[1] [3] A2 A 100 - 110 50 - 60 N/A 3 8S 36 I.V. Pole
U.V. Light
Casters
34400 Logic Series[2] [4] A2 A 100 - 110 50 - 60 N/A 4 10S 36 Casters
I.V. Pole
U.V. Light
34408 Logic Series[3] [4] A2 A 100 - 110 50 - 60 N/A 4 8S 36 Casters
I.V. Pole
U.V. Light
34410 Logic Series[3] [4] B2 A 100 - 110 50 - 60 810 @ 1.9 4 8S 36 I.V. Pole
U.V. Light
34500 Logic Series[2] [5] A2 A 100 - 110 50 - 60 N/A 5 10S 36 Casters
I.V. Pole
U.V. Light
34508 Logic Series[3] [5] A2 A 100 - 110 50 - 60 N/A 5 8S 36 Casters
I.V. Pole
U.V. Light
34600 Logic Series[2] [6] A2 A 100 - 110 50 - 60 N/A 6 10S 36 Casters
I.V. Pole
U.V. Light
34608 Logic Series[3] [6] A2 A 100 - 110 50 - 60 N/A 6 8S 36 Casters
I.V. Pole
U.V. Light
34610 Logic Series[3] [7] B2 A 100 - 110 50 - 60 1218 @ 2.2 6 8S 36 Bag-In/Bag-Out
I.V. Pole
U.V. Light
34800 PuriCare Series[1] A2 A 100 - 110 50 - 60 N/A 4 10S 36 I.V. Pole
U.V. Light
34810 PuriCare Series[4] A2 A 100 - 110 50 - 60 N/A 6 10S 36 I.V. Pole
U.V. Light		 

[1] Beginning with serial number 070570504.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[2] Certified for use with power supplies of 230V/50 Hz and 230V/60 Hz.
[3] Certified for use with power supplies of 100V/50 Hz, 100V/60 Hz, 230V/50 Hz, and 230V/60
    Hz.
[4] Beginning with serial number 070570502.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[5] Beginning with serial number 070570511.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (2.25 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed. This
    cabinet model was Certified to NSF/ANSI 49-2007.
[6] Beginning with serial number 070570503.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (4.25 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.
[7] Beginning with serial number 070900000.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (4.25 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nomial set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was certified to NSF/ANSI 49-2007.


NOTE: Bench stand models 3730300, 3730310, 3780200 and 3780100 may be used with cabinet models
      34300/34308 Logic Series.
      Bench stand models 3730400, 3730410, 3780201 and 3780101 may be used with cabinet models
      34400/34408 Logic Series and the 34800 PuriCare Series.
      Bench stand models 3730500, 3730510, 3780203, 3780106, 3780107, 3780312, and 3780316 may
      be used with cabinet models 34500/34508 Logic Series.
      Bench stand models 3730600, 3630610, 3780202 and 3780102 may be used with cabinet models
      34600/34608 Logic Series and the 34810 PuriCare Series.
      Bench stand model 3730400 may also be used with cabinet models 34410 Logic Series.
      All bench stand models beginning with 378 may be used with or without the optional wheel
      kit (PN# 3784000).

 
MICROZONE CORPORATION 
86 HARRY DOUGLAS DRIVE
OTTAWA, ONTARIO K2S 2C7 
CANADA 
613-831-8318
Visit this company's website
Facility : NEPEAN, ONTARIO, CANADA

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
BK-2-4[2] [3] A2 A 100 - 110 61 - 71 N/A 4 10H 27 U.V. Light
I.V. Pole
BK-2-4B3[2] A2 A 100 - 110 61 - 71 N/A 4 10H 27 U.V. Light
I.V. Pole
BK-2-4B3-BT[2] A2 B 100 - 110 61 - 71 N/A 4 10H NA U.V. Light
I.V. Pole
BK-2-4BT[2] [3] A2 B 100 - 110 61 - 71 N/A 4 10H NA U.V. Light
I.V. Pole
BK-2-6[1] [3] A2 A 100 - 110 61 - 71 N/A 6 10H 27 U.V. Light
I.V. Pole
BK-2-6B3[1] A2 A 100 - 110 61 - 71 N/A 6 10H 27 U.V. Light
I.V. Pole
BK-2-6B3-BT[1] A2 B 100 - 110 61 - 71 N/A 6 10H NA U.V. Light
I.V. Pole
BK-2-6BT[1] [3] A2 B 100 - 110 61 - 71 N/A 6 10H NA U.V. Light
I.V. Pole		 

[1] Beginning with serial number 802-0954 and all subsequent units.  Inflow nominal
    set-point of 105 fpm was established with a direct airflow reading instrument.  A
    corresponding nominal set-point of 118 fpm was confirmed using manufacturer's
    recommended alternate method with thermal anemometer above exhaust filter without
    adjusting cabinet airflow balance.  Downflow nominal set-point of 66 fpm was established
    with U.V. Light and I.V. Pole installed.  Certified for use with power supply of 220 V /
    50 Hz.
[2] Beginning with serial number 801-1693 and all subsequent units.  Inflow nominal
    set-point of 105 fpm was established with a direct airflow reading instrument.  A
    corresponding nominal set-point of 122 fpm was confirmed using the manufacturer's
    recommended alternate method with thermal anemometer above exhaust filter without
    adjusting cabinet airflow balance.  Downflow nominal set-point of 66 fpm was established
    with U.V. Light and I.V. Pole installed.  Certified for use with power supply of 220 V /
    50 Hz.
[3] This model has an A2 type design clasification.


 
NUAIRE, INC. 
2100 FERNBROOK LANE
PLYMOUTH, MN 55447 
763-553-1270
Visit this company's website
Facility : PLYMOUTH, MN

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
NU-425-400[1] [2] [3] A2 A 100 - 110 55 - 65 N/A 4 8S 32 I.V. Pole
U.V. Light
NU-425-400[1] [2] [3] A2 A 100 - 110 55 - 65 N/A 4 10S 32 I.V. Pole
U.V. Light
NU-425-500[1] [3] [4] A2 A 100 - 110 55 - 65 N/A 5 8S 32 U.V. Light
I.V. Pole
NU-425-500[1] [3] [4] A2 A 100 - 110 55 - 65 N/A 5 10S 32 U.V. Light
I.V. Pole
NU-425-600[1] [3] [5] A2 A 100 - 110 55 - 65 N/A 6 8S 32 I.V. Pole
U.V. Light
NU-425-600[1] [3] [5] A2 A 100 - 110 55 - 65 N/A 6 10S 32 I.V. Pole
U.V. Light
NU-427-400[1] [6] B1 A 100 - 110 65 - 75 282 @ 0.7 4 8S 32 Bag-In/Bag-Out
I.V. Pole
U.V. Light
NU-427-600[1] [7] B1 A 100 - 110 65 - 75 474 @ 0.9 6 8S 32 I.V. Pole
U.V. Light
Bag-In/Bag-Out
NU-430-400[1] [8] [9] B2 A 100 - 110 55 - 65 829 @ 1.7 4 8S 32 Bag-In/Bag-Out
I.V. Pole
U.V. Light
Armrest
NU-430-600[1] [8] [10] B2 A 100 - 110 55 - 65 1221 @ 2.0 6 8S 32 Bag-In/Bag-Out
I.V. Pole
U.V. Light
NU-480-400[1] [11] [12] A2 A 100 - 110 55 - 65 N/A 4 10S 33 I.V. Pole
U.V. Light
NU-480-400[1] [11] [12] A2 A 100 - 110 55 - 65 N/A 4 8S 33 I.V. Pole
U.V. Light
NU-480-600 A2 A 100 - 110 55 - 65 N/A 6 10S 33 I.V. Pole
U.V. Light
NU-480-600[1] [11] [13] A2 A 100 - 110 55 - 65 N/A 6 8S 33 I.V. Pole
U.V. Light		 

[1] Inflow nominal set-point of 105 fpm was established with a direct airflow reading
    instrument.  A corresponding inflow nominal set-point of 105 fpm (corrected to local air
    density) was confirmed using manufacturer's recommended alternate method with thermal
    anemometer in a constricted (3 inch high) access opening for appropriate correction
    factor, if applicable, without adjusting cabinet airflow balance.
[2] Beginning with series 60 and higher.  Downflow nominal set-point of 60 fpm was
    established 4 inches above the plane of the window with the I.V. Pole and U.V. Light
    removed.  This cabinet qualifies only with the armrest installed.  This cabinet
    qualifies with optional DC motor installed.  This cabinet model was Certified to
    NSF/ANSI 49–2004.
    Listed model designation NU 437 with electronic control panel and airflow monitor.
    Listed model designation  NU 440 with electronic airflow control system.
    Listed model may be prefaced with Q, N, L or S (i.e. NU-Q425-400).
[3] Listed model may be suffixed with E. Certified for use with power supplies of 230V/50Hz
    and 230V/60Hz.
[4] Beginning with Series 60 and higher.  Downflow nominal set-point of 60 fpm was
    established 4 inches above the plane of the window with the I.V. Pole and U.V. Light
    removed.  This cabinet qualifies only with the armrest installed.  This cabinet
    qualifies with optional DC motor installed.  This cabinet model was Certified to
    NSF/ANSI 49-2004.
    Listed model designation NU 437 with electronic control panel and airflow monitor.
    Listed model designation NU 440 with electronic airflow control system.
    Listed model may be prefaced with Q, N, L, or S (i.e. NU-Q425-500).
[5] Beginning with series 60 and higher.  Downflow nominal set-point of 60 fpm was
    established 4 inches above the plane of the window with the I.V. Pole and U.V. Light
    removed.  This cabinet qualifies only with the armrest installed.  This cabinet
    qualifies with optional DC motor installed.  This cabinet model was Certified to
    NSF/ANSI 49–2004.
    Listed model designation NU 437 with electronic control panel and airflow monitor.
    Listed model designation NU 440 with electronic airflow control system.
    Listed model may be prefaced with Q, N, L or S (i.e. NU-Q425-600).
[6] Beginning with Series 40 and higher.  Downflow nominal set-point of 70 fpm was
    established 4 inches above the plane of the window with the I.V. Pole removed and U.V.
    Light installed.  This cabinet model was Certified to NSF/ANSI 49-2002.  Listed model
    may be prefaced with Q, N, L or S (i.e. NU-Q427-400).
[7] Beginning with series 40 and higher.  Downflow nominal set-point of 70 fpm was
    established 4 inches above the plane of the window with the I.V. Pole removed and U.V.
    Light installed.
    Listed model may be prefaced with Q, N, L or S (i.e. NU-Q427-600).  This cabinet model
    was Certified to NSF/ANSI 49-2004.
[8] Listed model designation NU 435 without U.V. Light option.
    Listed model may be prefaced with Q, N, L or S (i.e. NU-Q435-400).
[9] Beginning with series 40 and higher.  Downflow nominal set point of 60 fpm was
    established 4 inches above the plane of the window with the I.V. Pole and U.V. Light
    removed.  This cabinet model was Certified to NSF/ANSI 49-2004.
[10] Beginning with series 40 and higher.  Downflow nominal set-point of 60 fpm was
     established 4 inches above the plane of the window with the I.V. Pole removed and the
     U.V. Light installed.  Listed model may be prefaced with Q, N, L or S (i.e.
     NU-Q430-600).  
     This cabinet model was Certified to NSF/ANSI 49-2002.
[11] Beginning with series 1 and higher.  Downflow nominal set-point of 60 fpm was
     established 4 inches above the plane of the window with the I.V. Pole and U.V. Light
     removed.  This cabinet model was Certified to NSF/ANSI 49-2009.
[12] Certified for use with power supplies of 115V/60Hz, 230V/50Hz, and 230V/60Hz.
[13] Certified for use with power supplies of 115V/60Hz, 100V/50Hz, 11V/60Hz, and 230V/50Hz,
     and 230V/60Hz.


 
THERMO ELECTRON LED GMBH 
ROBERT-BOSCH-STRASSE 1
D-63505 LANGENSELBOLD 
GERMANY 
49 61 813 5277
Visit this company's website
Facility : LANGENSELBOLD, GERMANY

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
HS12[1] A2 A 100 - 110 56 - 69
65 - 75
73 - 83
91 - 101		 N/A 4 8S 32 Armrest
Full Side Windows
KS12[2] A2 A 100 - 110 70 - 80 N/A 4 10
10H
S		 34 Full Side Windows
U.V. Light
I.V. Pole
Armrest
KS15[5] A2 A 100 - 110 65 - 75 N/A 5 10
10H
S		 35 Full Side Windows
I.V. Pole
U.V. Light
Armrest
KS18[3] A2 A 100 - 110 65 - 75 N/A 6 10
10H
S		 34 Full Side Windows
I.V. Pole
U.V. Light
KS9[4] A2 A 100 - 110 65 - 75 N/A 3 10
10H
S		 35 Full Side Windows
I.V. Pole
U.V. Light
Armrest		 

[1] Beginning with serial number 99106700.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  A corresponding nominal set-point
    of 115 fmp was confirmed using the manufacturer's recommended alternate, calculated
    inflow velocity method with thermal anemometer in a constricted access opening without
    adjusting cabinet airflow balance.  This model qualifies as having non-uniformed (zoned)
    downflow only.  The downflow nominal set-points were established utilizing four lateral
    (side-to-side) zone grids beginning with zone 1 at the rear of the work area and ending
    with zone 4 at the front of the work area behind the window.  This cabinet qualifies
    only with the armrest installed. This cabinet model was Certified with a 4 section work
    surface.
[2] Beginning with serial number 40292176.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  A corresponding inflow nominal
    set-point of 105 fpm (corrected to local air density) was confirmed using the
    manufacturer's recommended alternate method with thermal anemometer in a constricted (3
    inch high) access opening (consult manufacturer's operator's manual for appropriate
    correction factor, if applicable) without adjusting cabinet airflow balance. This
    cabinet model was Certifed with a 4 section work surface. This cabinet model was
    Certified to NSF/ANSI 49-2002.
[3] Beginning with serial number 40292176.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  A corresponding inflow nominal
    set-point of 105 fpm (corrected to local air density) was confirmed using the
    manufacturer's recommended alternate method with thermal anemometer in a constricted (3
    inch high) access opening (consult manufacturer's operator's manual for appropriate
    correction factor, if applicable) without adjusting cabinet airflow balance. This
    cabinet model was Certified with a 6 section work surface. This cabinet model was
    Certified to NSF/ANSI 49-2002.
[4] Beginning with serial number 40329642.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator's manual
    for appropriate correction factor) without adjusting cabinet airflow balance. This
    cabinet model was Certified with a 3 section work surface. This cabinet model was
    Certified to NSF/ANSI 49-2002.
[5] Beginning with serial number 40349384.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator's manual
    for appropriate correction factor) without adjusting cabinet airflow balance. This
    cabinet model was Certified with a 5 section work surface. This cabinet model was
    Certified to NSF/ANSI 49-2002.


 
THERMO FISHER SCIENTIFIC 
401 MILLCREEK ROAD
MARIETTA, OH 45750 
740-373-4763
Visit this company's website
Facility : MARIETTA, OH

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
1200[1] A1 C 75 - 85 65 - 75 N/A 4 10S NA U.V. Light
I.V. Pole
1201[1] A1 C 75 - 85 65 - 75 N/A 4 10S NA U.V. Light
I.V. Pole
1205[2] A1 C 80 - 90 65 - 75 N/A 6 10S NA U.V. Light
I.V. Pole
Casters
1214[2] A1 C 80 - 90 65 - 75 N/A 6 10S NA U.V. Light
I.V. Pole
Casters
1284[3] A2 A 105 - 115 65 - 75 N/A 4 10S 33 U.V. Light
I.V. Pole
Armrest
1285[3] A2 A 105 - 115 65 - 75 N/A 4 10S 33 U.V. Light
I.V. Pole
Armrest
1286[4] A2 A 105 - 115 70 - 80 N/A 6 10S 33 U.V. Light
I.V. Pole
Armrest
1287[4] A2 A 105 - 115 70 - 80 N/A 6 10S 33 U.V. Light
I.V. Pole
Armrest
1345[6] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1346[6] [7] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1347[6] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1348[6] [7] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1354[5] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1355[6] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1356[6] [7] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1357[6] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1358[6] [7] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1359[5] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1375[6] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1376[6] [7] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1377[6] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1378[6] [7] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1384[5] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1385[6] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1386[6] [7] A2 A 100 - 110 58 - 68 N/A 4 10S 36 Armrest
I.V. Pole
U.V. Light
1387[6] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1388[6] [7] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1389[5] A2 A 100 - 110 58 - 68 N/A 6 10S 36 Armrest
I.V. Pole
U.V. Light
1440[8] A2 A 100 - 110 50 - 60 N/A 4 10S
H		 36 I.V. Pole
U.V. Light
4 Section Work Surface
Armrest
1448[8] A2 A 100 - 110 50 - 60 N/A 4 8S
H		 36 I.V. Pole
U.V. Light
4 Section Work Surface
Armrest
1460[9] A2 A 100 - 110 50 - 60 N/A 6 10S
H		 36 I.V. Pole
U.V. Light
6 Section Work Surface
Armrest
1468[9] A2 A 100 - 110 50 - 60 N/A 6 8S
H		 36 I.V. Pole
U.V. Light
6 Section Work Surface
Armrest		 

[1] Beginning with serial number XXXXX-1.  Inflow nominal set-point of 80 fpm was
    established with a direct airflow reading instrument.  A corresponding nominal set-point
    of 80 fpm (corrected to local air density) was confirmed using manufacturer's
    recommended alternate method with thermal anemometer in a constricted (3 inch high)
    access opening (consult manufacturer's operator's manual for correction factor, if
    applicable) without adjusting cabinet airflow balance. This cabinet model was Certified
    to NSF/ANSI 49-2002.
[2] Beginning with serial number XXXXX-2.  Inflow nominal set-point of 85 fpm established
    with a direct airflow reading instrument. A corresponding nominal set-point of 85 fpm
    was confirmed using manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator's manual
    for correction factor, if applicable) with adjusting cabinet airflow balance. This
    cabinet model was Certified to NSF/ANSI 49-2002.
[3] Beginning with serial number XXXXX-1.  Inflow nominal set-point of 110 fpm was
    established with a direct airflow reading instrument. The nominal set-point was
    confirmed using the manufacturer's recommended alternate calculated method with thermal
    anemometer in a constricted (3 inch high) access opening, (consult manufacturer's
    operator's manual for appropriate correction factor) without adjusting cabinet airflow
    balance. Downflow nominal set-point of 70 fpm was established with U.V. Light and I.V.
    Pole removed per NSF/ANSI 49-2002.
[4] Beginning with serial number XXXXX-1 for models 1286 and 1287. Inflow nominal set-point
    of 110 fpm was established with a direct airflow reading instrument.  The nominal
    set-point was confirmed using the manufacturer's recommended alternate calculated method
    with thermal anemometer in a constricted (3 inch high) access opening, (consult
    manufactuer's operator's manual for appropriate correction factor) without adjusting
    cabinet airflow balance. Downflow nominal set-point of 75 fpm was established with U.V.
    Light and I.V. Pole removed per NSF/ANSI 49-2002.
[5] Inflow nominal set point of 105 fpm was established with a direct airflow reading
    instrument.  This nominal set-point was confirmed using the manufacturer's recommended
    alternate method with thermal anemometer in a constricted (3 inch high) access opening
    (consult manufacturer for appropriate correction factor, if applicable), without
    adjusting cabinet airflow balance.  Downflow nominal set-point of 63 fpm was established
    with I.V. Pole and U.V. Light removed.  This cabinet model was Certified to NSF/ANSI
    49-2004.  Certified for use with power supply of 220V/50Hz.
[6] Beginning with serial number XXXXX-1.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance.  Downflow
    nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.  Certified for use with power supply of
    120 V / 50 Hz and 120 V / 60 HZ.
[7] Certified for use with power supply of 220 V / 50 Hz and 220 V / 60 Hz.
[8] Beginning with serial number 102386.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument. This nominal set point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance. Downflow
    nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This
    cabinet model was Certified to NSF/ANSI 49-2004.
[9] Beginning with serial number 102428.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument. This nominal set point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer for appropriate
    correction factor, if applicable), without adjusting cabinet airflow balance. Downflow
    nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This
    cabinet model was Certified to NSF/ANSI 49-2004.


 
THERMO FISHER SCIENTIFIC 
401 MILLCREEK ROAD
MARIETTA, OH 45750 
740-373-4763
Facility : # 1 USA

Model
Number		 Cabinet
Type/Style		 Inflow
Velocity
(fpm)		 Downflow
Velocity
(fpm)		 CBV (cfm)
at Static
Pressure
(in w.g.)		 Cabinet
Width
ft.		 Window
Ht/Type
in.		 Bench
Ht
Max
in.		 Acceptable
Options
 
1310[1] [2] B2 A 100 - 110 50 - 60 810 @ 1.9 4 8S 36 Bag-In/Bag-Out
I.V. Pole
U.V. Light
1360[3] [4] B2 A 100 - 110 50 - 60 1218 @ 2.2 6 8S 36 Bag-In/Bag-Out
I.V. Pole
U.V. Light		 

[1] Beginning with serial number 070570502.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator manual
    for appropriate correction factor) without adjusting cabinet airflow balance.  Downflow
    nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light removed.  This
    cabinet model was Certified to NSF/ANSI 49-2004.  Model 1311 is equivalent to Model
    1310, but comes equipped with U.V. lighting (Listed as an acceptable option).
[2] Certified for use with alternate power supplies.  Model 1315 is equivalent to model
    1310, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with
    a Chinese-compatible plug.  Model 1316 is equivalent, but is rated for use with power
    supplies of 230V and 50/60 Hz and is equipped with U.V. lighting and a
    Chinese-compatible plug.  Model 1317 is equivalent, but is rated for use with power
    supplies of 230V and 50/60 Hz and is equipped with a North American 230 Volt-compatible
    plug.  Model 1318 is equivalent, but is rated for use with power supplies of 230V and
    50/60 Hz and is equipped with U.V. lighting and a North American 230 Volt-compatible
    plug.
[3] Beginning with serial number 070900000.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (4.25 inch height) access opening (consult manufacturer’s operator
    manual for appropriate correction factor) without adjusting cabinet airflow balance. 
    Downflow nominal set-point of 55 fpm was established with I.V. Pole and U.V. Light
    removed.  This cabinet model was Certified to NSF/ANSI 49-2007.  Model 1361 is
    equivalent to Model 1360, but is equipped with U.V. lighting (listed as an acceptable
    option).
[4] Certified for use with alternate power supplies.  Model 1362 is equivalent to model
    1360, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with
    a Chinese-compatible plug.  Model 1363 is equivalent, but is rated for use with power
    supplies of 230V and 50/60 Hz and is equipped with U.V. lighting and a
    Chinese-compatible plug.  Model 1364 is equivalent, but is rated for use with power
    supplies of 230V and 50/60 Hz and is equipped with a North American 230 Volt-compatible
    plug.  Model 1365 is equivalent, but is rated for use with power supplies of 230 V and
    50/60 Hz and is equipped with U.V. lighting and a North American 230 Volt-compatible
    plug.

Number of matching Manufacturers is 14
Number of matching Products is 114
Processing time was 1 seconds