NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, May 7, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=32730&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects

 
Multipure / Multipure Drinking Water Systems 
Las Vegas Technology Center
7251 Cathedral Rock Drive 
Las Vegas, NV 89128 
United States 
800-622-9206 
702-360-8880
Visit this company's website

Facility : # 1 USA

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Counter-Top Connected to Sink Faucet [Pb]
Aquadome CB6AD 750(1) .75   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Plumbed-In to Separate Tap
AQUALUXE[Pb] CBLX 500(1) .75   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Aqualite[Pb] CB5 450(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Aquamini[2] [Pb] CBMINI 250(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Aquaperform[Pb] CB11As 600(1) 1   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Aquaversa[Pb] CB6 750(1) .75   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
CB-EXTRA[Pb] CBXT 340(1) .71   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] This system is also Certified under the following SKUS: AQBRITEBL, AQBRITEBLK,
    AQBRITEGR, AQBRITEPI, AQBRITEPR, AQBRITEWHT, AQBRITEEYE.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Filter Cartridges[3] [Pb]
CB5  
CB6[4]  
CBLX[5]  

   
[3] Conforms to the material requirements only.
[4] Tested in a Multipure Drinking Water Systems housing at a flow rate of 0.75 gpm to a
    capacity of 750 gallons for the reduction of asbestos, atenolol, bisphenol A,
    carbamazepine, chloramine, chlordane, chlorine, cyst, DEET, estrone, ibuprofen, lead,
    linuron, meprobamate, metolachlor, MTBE, mercury, naproxen, nominal particulate 
    (class I), nonyl phenol, PCB, phenytoin, taste and odor, TCEP, TCPP, toxaphene,
    trimethoprim, turbidity, and VOC.  Health effects testing per NSF/ANSI Standard 53. 
    Emerging Compounds/Incidental Contaminants testing per NSF/ANSI Standard 401.
[5] Tested in a Multipure Drinking Water Systems housing at a flow rate of 0.75 gpm to a
    capacity of 580 gallons for the reduction of chloramine, chlorine, nominal particulate
    (class I), and taste and odor; to NSF/ANSI Standard 53 for asbestos, chlordane, cyst,
    lead, MTBE, mercury, microcystin, PCB, pentavalent arsenic, PFOS/PFOA (tested to the
    2021 version of Standard 53), toxaphene, turbidity, and VOC; to NSF/ANSI Standard 401
    for atenolol, bisphenol A, carbamazepine, DEET, estrone, ibuprofen, linuron,
    meprobamate, metolachlor, naproxen, nonyl phenol, phenytoin, TCEP, TCPP, and
    trimethoprim; and NSF Protocol P231 for bacteria, live cyst, and virus.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Facility : # 2 USA

 
           

COMPONENTS: Filter Cartridges[1] [Pb]
CB5  
CB6[2]  
CBLX[3]  

   
[1] Conforms to the material requirements only.
[2] Tested in a Multipure Drinking Water Systems housing at a flow rate of 0.75 gpm to a
    capacity of 750 gallons for the reduction of asbestos, atenolol, bisphenol A,
    carbamazepine, chloramine, chlordane, chlorine, cyst, DEET, estrone, ibuprofen, lead,
    linuron, meprobamate, metolachlor, MTBE, mercury, naproxen, nominal particulate 
    (class I), nonyl phenol, PCB, phenytoin, taste and odor, TCEP, TCPP, toxaphene,
    trimethoprim, turbidity, and VOC.  Health effects testing per NSF/ANSI Standard 53. 
    Emerging Compounds/Incidental Contaminants testing per NSF/ANSI Standard 401.
[3] Tested in a Multipure Drinking Water Systems housing at a flow rate of 0.75 gpm to a
    capacity of 580 gallons for the reduction of chloramine, chlorine, nominal particulate
    (class I), and taste and odor; to NSF/ANSI Standard 53 for asbestos, chlordane, cyst,
    lead, MTBE, mercury, microcystin, PCB, pentavalent arsenic, radon, toxaphene, turbidity,
    and VOC; to NSF/ANSI Standard 401 for atenolol, bisphenol A, carbamazepine, DEET,
    estrone, ibuprofen, linuron, meprobamate, metolachlor, naproxen, nonyl phenol, 
    phenytoin, TCEP, TCPP, and trimethoprim; NSF Protocol P231 for bacteria, live cyst, and
    virus; and NSF Protocol P473 for PFOS/PFOA.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds