These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/food/Listings.asp?TradeName=slicer&Standard=008&
NSF/ANSI STANDARD 8
Commercial Powered Food Preparation Equipment
Commercial Powered Food Preparation Equipment
| A.B.M. Company S.R.L. | |
| Via Rho 6 | |
| 20020 Lainate (Milano) | |
| Italy | |
| 39 02 9373781 | |
| Visit this company's website |
Facility : Lainate (Milano), Italy
|
Gravity Slicer |
|
| B350A[1] | |
| B350Comfort[2] | |
| B350M[2] | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number 12337. [2] Certified to NSF/ANSI 8–2010. |
|
| AB Hallde Maskiner | |
| Skalhotsgatan 4 Box 1165 | |
| S-16426 Kista | |
| Sweden | |
| 46 8 5877 3000 | |
| Visit this company's website |
Facility : Kista, Sweden
|
COMPONENTS: |
|
|
Accessories for RG-100, RG-200, RG-250, RG-300, RG350 and RG-400 Cutter |
|
| Fine Cut Slicer One Knife (FCS1) | |
| Fine Cut Slicer Twoknives (FCS2) | |
| Standard Slicer (SS) | |
| Alfa International Corporation | |
| 4 Kaysal Place | |
| Armonk, NY 10504 | |
| United States | |
| 800-327-2532 | |
| 914-273-2222 |
Facility : # 1 Taiwan
|
Vegetable Slicer Accessories |
|
|
Twoyco Complete Vegetable Slicer Attachment[1] |
|
| VS-888 | |
[1] Beginning with serial number: 1210000 |
|
|
Twoyco Complete Vegetable Slicer Attachment with Disc Holder VS-1200DH[2] |
|
| GS-12 | |
[2] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64" |
|
|
Twoyco Complete Vegetable Slicer Attachment with Disc Holder VS-1200DH22[2] |
|
| GS-22 | |
[2] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64" |
|
|
Twoyco Complete Vegetable Slicer Attachment with Slicer Attachment VS-1200KDS[3] |
|
| VS-12 | |
[3] With "S" stainless steel knife |
|
|
Twoyco Complete Vegetable Slicer Attachment with Slicer Attachment VS-1200KDS22[3] |
|
| VS-22 | |
[3] With "S" stainless steel knife |
|
|
Vegetable Slicer Attachment [3] |
|
| VS-12DH | |
| VS-12GD | |
| VS-12KDS | |
| VS-12SD[2] | |
| VS-22DH - Disc Holder, #22 Power Hubs | |
| VS-22H - Housing, #22 Power Hubs | |
| VS-22KDS - Slicer Holder, #22 Power Hubs | |
| VS-99D | |
| VS-99H | |
| VS-99P | |
[2] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64" [3] With "S" stainless steel knife |
|
| Aroma Taiwan Machinery Company | |
| P.O. Box 46-110 | |
| Taichung 408 | |
| Taiwan | |
| 886 4 269 13600 |
Facility : Changshan, Fujian, China
|
Vegetable Slicer |
|
| ARM-02BV | |
| Axis Equipment Co. | |
| 5659 Royalmount Avenue | |
| Montreal, QC H4P 2P9 | |
| Canada | |
| 514-737-9701 |
Facility : Varese, Italy
|
Gravity Slicer[1] |
|
| AX-S 510/N | |
| AX-S 520/N | |
| AX-S 521/N | |
| AX-S C12/N | |
| AX-S C12E/N | |
| AX-S C12F/N | |
| AX-S C13/N | |
| AX-S C13E/N | |
| AX-S C13F/N | |
| AX-S C14/N | |
| AX-S C14E/N | |
| AX-S C14F/N | |
| AX-S C15/N | |
| AX-S CA12/N | |
| AX-S CA12E/N | |
| AX-S CA12F/N | |
| AX-S CA13/N | |
| AX-S CA13E/N | |
| AX-S CA13F/N | |
| AX-S CA14/N | |
| AX-S CA14E/N | |
| AX-S CA14F/N | |
| AX-S CA15/N | |
| AX-S CXM12/N | |
| AX-S CXM12E/N | |
| AX-S CXM12F/N | |
| AX-S CXM13/N | |
| AX-S CXM13E/N | |
| AX-S CXM13F/N | |
| AX-S CXM14/N | |
| AX-S CXM14E/N | |
| AX-S CXM14F/N | |
| AX-S CXM15/N | |
| AX-S GL10/N | |
| AX-S GL10E/N | |
| AX-S GL10F/N | |
| AX-S GL10F/N | |
| AX-S GL11/N | |
| AX-S GL12/N | |
| AX-S GL12E/N | |
| AX-S GL12F/N | |
| AX-S GL12F/N | |
| AX-S GLA10/N | |
| AX-S GLA10E/N | |
| AX-S GLA12/N | |
| AX-S GLA12E/N | |
| AX-S GLM10/N | |
| AX-S GLM10E/N | |
| AX-S GLM10F/N | |
| AX-S GLM12/N | |
| AX-S GLM12E/N | |
| AX-S GLM12F/N | |
| AX-S M12/N | |
| AX-S M14/N | |
| AX-S SPST/N | |
| AX-S SPSTARTAUTO/N | |
| AX-S ST10/N | |
| AX-S ST12/N | |
| AX-S ST12HD/N | |
| AX-S ST9/N | |
| AX-S STARTAUTO/N | |
| AX-S STL12/N | |
| AX-S VS10/N | |
| AX-S VS10F/N | |
| AX-S VS12/N | |
| AX-S VS12F/N | |
| AX-S VS9/N | |
| AX-S10/N | |
| AX-S10F/N | |
| AX-S11/N | |
| AX-S12/N | |
| AX-S12A/NR | |
| AX-S12AF/NR | |
| AX-S12AF/NR | |
| AX-S12F/N | |
| AX-S12F/NR | |
| AX-S13/N | |
| AX-S13A/NR | |
| AX-S13F/N | |
| AX-S13F/NR | |
| AX-S14/N | |
| AX-S14A/NR | |
| AX-S14AF/NR | |
| AX-S14F/N | |
| AX-S14F/NR | |
| AX-S7/N | |
| AX-S9/N | |
| AX-SA300/N | |
| AX-SA30F/N | |
| AX-SA330/N | |
| AX-SA33F/N | |
| AX-SA350/N | |
| AX-SA35F/N | |
| AX-SD10/N | |
| AX-SD10F/NR | |
| AX-SD12/N | |
| AX-SD12A/NR | |
| AX-SD12AF/NR | |
| AX-SD12F/N | |
| AX-SD12F/NR | |
| AX-SD9/N | |
| AX-SD9F/N | |
| AX-SD9F/NR | |
| AX-SOG9/N | |
| AX-SOG9F/N | |
| AX-SP12/N | |
| AX-SP12F/NR | |
| AX-SP13/N | |
| AX-SP13F/NR | |
| AX-SP14/N | |
| AX-SP14A/NR | |
| AX-SP14AF/NR | |
| AX-SP14F/NR | |
| AX-SS10/N | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number 3243. |
|
| Berkel Company | |
| 701 South Ridge Avenue | |
| Troy, OH 45374 | |
| United States | |
| 937-332-3000 | |
| Visit this company's website |
Facility : Richmond Hill, GA
|
COMPONENTS: |
|
|
Vegetable Slicer[1] |
|
| VSPH | |
[1] NSF Component Mark accepted as NSF-8. |
|
Facility : La Porte, IN
|
Bread Slicer |
|
| MB 1/2 | |
| MB 3/4 | |
| MB 3/8 | |
| MB 7/16 | |
| MB 9/16 | |
| Berkel Company | |
| 701 South Ridge Avenue | |
| Troy, OH 45374 | |
| United States | |
| 937-332-3000 |
Facility : Solbiate Arno (VA), Italy
|
Slicer |
|
| 825-A[1] | |
| 827-A[2] | |
| 827-E[3] | |
| 829-A[4] | |
| 829-E[5] | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number 1020214. [2] Certified to NSF/ANSI 8–2010 starting from serial number 1020756. [3] Certified to NSF/ANSI 8–2010 starting from serial number 1019547. [4] Certified to NSF/ANSI 8–2010 starting from serial number 1021346. [5] Certified to NSF/ANSI 8–2010 starting from serial number 1020487. |
|
| Biro Manufacturing Company (The) | |
| 1114 W Main Street | |
| Marblehead, OH 43440 | |
| United States | |
| 419-798-4451 |
Facility : Marblehead, OH
|
Horizontal Slicer[2] [3] |
|
| 109PC | |
[2] Beginning with serial number 418. [3] Available with take away conveyor option. |
|
| Centaur | |
| 200 West 22nd Street | |
| Suite 240 | |
| Lombard, IL 60148 | |
| United States | |
| 630-963-9501 |
Facility : # 1 Italy
|
Food Slicer[1] |
|
| 209-1 | |
| 210-1 | |
| 212-1 | |
[1] Certified to NSF/ANSI 8-2010. |
|
| Dutchess Bakers' Machinery Co., Inc. | |
| 302 Grand Avenue | |
| P.O. Box 39 | |
| Superior, WI 54880 | |
| United States | |
| 715-394-4444 | |
| Visit this company's website |
Facility : Superior, WI
|
Bread/Bun and Bagel Slicer |
|
| M-260 | |
| M-260E | |
| M-270 | |
| M-270C | |
| M-270CE | |
| M-270E | |
| Electrolux Professional | |
| 3225 Southwest 42nd Street | |
| Fort Lauderdale, FL 33312 | |
| United States | |
| 800-331-7958 | |
| 954-327-6740 | |
| Visit this company's website |
Facility : Aubusson, France
|
Vegetable Slicer |
|
| TR-21 | |
| TR-22 | |
| TR-23 | |
| TR-24 | |
| TRS | |
| Globe Food Equipment Company | |
| 2253 Dryden Road | |
| Dayton, OH 45439 | |
| United States | |
| 800-347-5423 | |
| 937-299-5493 | |
| Visit this company's website |
Facility : Cura Carpignano - Pavia, Italy
|
Food Slicer |
|
| CP220[1] | |
| CP250[1] | |
| CP300[1] | |
| E220[1] | |
| E250[1] | |
| E300[1] | |
| E300D[1] | |
| ER220[1] | |
| ER250[1] | |
| ER300[1] | |
| ER300D[1] | |
| SBS10-1[1] | |
| SBS12-1[1] | |
| SBS9-1[1] | |
[1] Certified to NSF/ANSI 8–2010. |
|
Facility : Gallarate, Italy
|
Meat and Cheese Slicer |
|
| C10[1] | |
| C12[2] | |
| C9[3] | |
| G10[4] | |
| G12[5] | |
| G12A[6] | |
| G14[7] | |
| SCR12[8] | |
[1] Certified to NSF/ANSI 8 - 2010 with beginning serial number 250000. [2] Certified to NSF/ANSI 8 - 2010 with beginning serial number 350000. [3] Certified to NSF/ANSI 8 - 2010 with beginning serial number 150000. [4] Certified to NSF/ANSI 8 - 2010 with beginning serial number 450000. [5] Certified to NSF/ANSI 8 - 2010 with beginning serial number 550000. [6] Certified to NSF/ANSI 8 - 2010 with beginning serial number 650000. [7] Certified to NSF/ANSI 8 - 2010 with beginning serial number 950000. [8] Certified to NSF/ANSI 8 - 2010 with beginning serial number 850000. |
|
Facility : Bydgoszcz, Poland
|
Slicer |
|
| GC512[1] | |
[1] Certified to NSF/ANSI 8-2010 with beginning Serial Number 540000. |
|
| Hobart Corporation | |
| World Headquarters | |
| 701 South Ridge Avenue | |
| Troy, OH 45374 | |
| United States | |
| 937-332-2651 | |
| Visit this company's website |
Facility : Kista, Sweden
|
COMPONENTS: |
|
|
Accessories for FP-100, FP-150, FP-200, FP-250, FP-300, FP350 |
|
| Fine Cut Slicer One Knife (FCS1) | |
| Fine Cut Slicer Two Knives (FCS2) | |
| Standard Slicer (SS) | |
| Hobart Corporation | |
| World Headquarters | |
| 701 South Ridge Avenue | |
| Troy, OH 45374 | |
| United States | |
| 937-332-2621 | |
| Visit this company's website |
Facility : Richmond Hill, GA
|
Deli Slicer[1] [2] |
|
| HS6 | |
| HS7 | |
| HS8 | |
| HS9 | |
[1] Available with the suffix N indicating a non-removable knife. [2] Certified to NSF/ANSI 8-2010. |
|
|
COMPONENTS: |
|
|
Vegetable Slicer[4] |
|
| VS9 | |
[4] NSF Component Mark accepted as NSF-8. |
|
| Hobart Corporation | |
| 701 South Ridge Avenue | |
| Troy, OH 45374 | |
| United States | |
| 937-332-2621 |
Facility : Solbiate Arno (VA), Italy
|
Slicer |
|
| Edge12[1] | |
[1] Certified to NSF/ANSI 8–2010. |
|
| Noaw S.R.L. |  |
| Via Colombera, 27 | |
| 21048 Solbiate Arno (VA) | |
| Italy | |
| 39 0331 219723 | |
| Visit this company's website |
Facility : Solbiate Arno (VA), Italy
|
Slicer |
|
| 30-E[1] [2] | |
| 300G[3] | |
| 350G[4] | |
| 350G48[5] | |
| EDGE[6] | |
| T4-S[7] | |
[1] Models are NSF Certified from serial number 15,000. [2] Certified to NSF/ANSI 8–2010 starting from serial number 1019547. [3] Certified to NSF/ANSI 8–2010 starting from serial number 1020756. [4] Certified to NSF/ANSI 8–2010 starting from serial number 1020487. [5] Certified to NSF/ANSI 8–2010 starting from serial number 1021346. [6] Certified to NSF/ANSI 8–2010. [7] Certified to NSF/ANSI 8–2010 starting from serial number 1020214. |
|
| Oliver Packaging & Equipment Company | |
| 3236 Wilson Drive Northwest | |
| Walker, MI 49534 | |
| United States | |
| 616-356-2950 | |
| Visit this company's website |
Facility : Walker, MI
|
Bread Slicer |
|
| 732-N | |
| 735-N | |
| 738 | |
| 738-V | |
| 748-N | |
| 758-N | |
| 777-N | |
| 777-NT | |
| 797-32N | |
| 797-32NC | |
| 797-48N | |
| 797-48NC | |
|
Bun/Bagel Slicer |
|
| 702-N | |
| 702-NSE | |
| 702-NSS | |
| 704-N | |
| 705-N | |
|
COMPONENTS: |
|
|
Bread Slicer Blade[1] |
|
| 0797-0029-1 | |
| 0797-0029-103 | |
| 0797-0029-8 | |
| 0797-2090-XXX[2] [3] | |
[1] The NSF Mark and model number will appear on packaging. [2] NSF Certified models are produced after September 27, 2006. [3] XXX - Blade width. |
|
| Omas S.P.A. | |
| Via 4 Novembre 6 | |
| I-21040 Oggiona S. Stefano (Varese) | |
| Varese | |
| Italy | |
| 39 03 31214311 |
Facility : Varese, Italy
|
Gravity Slicer[1] |
|
| 10.25/N | |
| 10.27/N | |
| 10.30/N | |
| 10.30A/NR | |
| 10.30AF/NR | |
| 10.30F/N | |
| 10.30F/NR | |
| 12.30/N | |
| 12.30A/NR | |
| 12.30AF/NR | |
| 12.30F/N | |
| 12.30F/NR | |
| 12.33/N | |
| 12.33A/NR | |
| 12.33AF/NR | |
| 12.33F/N | |
| 12.33F/NR | |
| 12.35/N | |
| 12.35A/NR | |
| 12.35AF/NR | |
| 12.35F/N | |
| 12.35F/NR | |
| 14.30/N | |
| 14.30F/NR | |
| 14.33/N | |
| 14.33F/NR | |
| 14.35/N | |
| 14.35A/NR | |
| 14.35AF/NR | |
| 14.35F/NR | |
| 510/N | |
| 520/N | |
| 521/N | |
| 81/N | |
| 82/N | |
| 82F/N | |
| 82F/NR | |
| 83/N | |
| 84/N | |
| 84F/N | |
| 84F/NR | |
| 85/N | |
| A300/N | |
| A30F/N | |
| A330/N | |
| A33F/N | |
| A350/N | |
| A35F/N | |
| C-300/N | |
| C-330/N | |
| C-350/N | |
| C-370/N | |
| C30E/N | |
| C30F/N | |
| C33E/N | |
| C33F/N | |
| C35E/N | |
| C35F/N | |
| CA300/N | |
| CA30E/N | |
| CA30F/N | |
| CA330/N | |
| CA33E/N | |
| CA33F/N | |
| CA350/N | |
| CA35E/N | |
| CA35F/N | |
| CA370/N | |
| CX-Matic 300/N | |
| CX-Matic 30E/N | |
| CX-Matic 30F/N | |
| CX-Matic 330/N | |
| CX-Matic 33E/N | |
| CX-Matic 33F/N | |
| CX-Matic 350/N | |
| CX-Matic 35E/N | |
| CX-Matic 35F/N | |
| CX-Matic 370/N | |
| GL-250/N | |
| GL-275/N | |
| GL-300/N | |
| GL-Matic 250/N | |
| GL-Matic 25E/N | |
| GL-Matic 25F/N | |
| GL-Matic 300/N | |
| GL-Matic 30E/N | |
| GL-Matic 30F/N | |
| GL25E/N | |
| GL25F/N | |
| GL30E/N | |
| GL30F/N | |
| GLA250/N | |
| GLA25E/N | |
| GLA25F/N | |
| GLA300/N | |
| GLA30E/N | |
| GLA30F/N | |
| MONDIAL 300/N | |
| MONDIAL 350/N | |
| OG22/F/N | |
| OG220/N | |
| START 220/N | |
| START 250/N | |
| START 300 HD/N | |
| START 300/N | |
| START AUTO/N | |
| START-L300/NL | |
| SUPER START AUTO/N | |
| SUPER START/N | |
| VS220/N | |
| VS250/N | |
| VS25F/N | |
| VS300/N | |
| VS30F/N | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number 3243. |
|
| Rheninghaus S.R.L. | |
| Strada del Cascinotto 139/39 L | |
| 10156 Torino | |
| Italy | |
| 39 01 12237514 |
Facility : Varese, Italy
|
Gravity Slicer[1] |
|
| 10.25/N | |
| 10.27/N | |
| 10.30/N | |
| 10.30A/NR | |
| 10.30AF/NR | |
| 10.30F/N | |
| 10.30F/NR | |
| 12.30/N | |
| 12.30A/NR | |
| 12.30AF/NR | |
| 12.30F/N | |
| 12.30F/NR | |
| 12.33/N | |
| 12.33A/NR | |
| 12.33AF/NR | |
| 12.33F/N | |
| 12.33F/NR | |
| 12.35/N | |
| 12.35A/NR | |
| 12.35AF/NR | |
| 12.35F/N | |
| 12.35F/NR | |
| 14.30/N | |
| 14.30F/NR | |
| 14.33/N | |
| 14.33F/NR | |
| 14.35/N | |
| 14.35A/NR | |
| 14.35AF/NR | |
| 14.35F/NR | |
| 510/N | |
| 520/N | |
| 521/N | |
| 81/N | |
| 82/N | |
| 82F/N | |
| 82F/NR | |
| 83/N | |
| 84/N | |
| 84F/N | |
| 84F/NR | |
| 85/N | |
| A300/N | |
| A30F/N | |
| A330/N | |
| A33F/N | |
| A350/N | |
| A35F/N | |
| C-300/N | |
| C-330/N | |
| C-350/N | |
| C-370/N | |
| C30E/N | |
| C30F/N | |
| C33E/N | |
| C33F/N | |
| C35E/N | |
| C35F/N | |
| CA300/N | |
| CA30E/N | |
| CA30F/N | |
| CA330/N | |
| CA33E/N | |
| CA33F/N | |
| CA350/N | |
| CA35E/N | |
| CA35F/N | |
| CA370/N | |
| CX-Matic 300/N | |
| CX-Matic 30F/N | |
| CX-Matic 330/N | |
| CX-Matic 33F/N | |
| CX-Matic 35E/N | |
| CX-Matic 35F/N | |
| GL-250/N | |
| GL-275/N | |
| GL-300/N | |
| GL-Matic 250/N | |
| GL-Matic 25E/N | |
| GL-Matic 25F/N | |
| GL-Matic 300/N | |
| GL-Matic 30E/N | |
| GL-Matic 30F/N | |
| GL25E/N | |
| GL25F/N | |
| GL30E/N | |
| GL30F/N | |
| GLA250/N | |
| GLA25E/N | |
| GLA25F/N | |
| GLA300/N | |
| GLA30E/N | |
| GLA30F/N | |
| MATIC 350/N | |
| MONDIAL 300/N | |
| MONDIAL 350/N | |
| OG220/N | |
| OG22F/N | |
| START 220/N | |
| START 250/N | |
| START 300 HD/N | |
| START 300/N | |
| START AUTO/N | |
| START-L300/NL | |
| SUPER START AUTO/N | |
| SUPER START/N | |
| VS220/N | |
| VS250/N | |
| VS25F/N | |
| VS300/N | |
| VS30F/N | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number 01/13-0001. |
|
| The Biro Manufacturing Company | |
| 1114 West Main Street | |
| Marblehead, OH 43440-2099 | |
| United States | |
| 419-798-4451 |
Facility : Lainate (Milano), Italy
|
Gravity Slicer |
|
| B350A[1] | |
| B350COMFORT[2] | |
| B350M[2] | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number 12337. [2] Certified to NSF/ANSI 8–2010. |
|
| Thunderbird Food Machinery Inc. | |
| 4602 Brass Way | |
| Dallas, TX 75236 | |
| United States | |
| 214-331-3000 | |
| Visit this company's website |
Facility : Changshan, Fujian, China
|
Vegetable Slicer |
|
| ARM-02BV | |
| Univex Corporation | |
| 3 Old Rockingham Road | |
| Salem, NH 03079-2133 | |
| United States | |
| 800-258-6358 | |
| 603-893-6191 | |
| Visit this company's website |
Facility : Salem, NH
|
Slicer |
|
| 1000M | |
| 1000S | |
| 1012M | |
| 4509[4] | |
| 4510[4] | |
| 4512[4] | |
| 6509 | |
| 6510 | |
| 6512[4] | |
| 7510 | |
| 7512 | |
| 8512 | |
| 9512 | |
| 9512[4] | |
| 9514[4] | |
| MAX 9714[4] | |
[4] Available with optional blade remover. |
|
|
Univex Mixer Accessories |
|
|
Vegetable Slicer[10] [11] |
|
| VS9 | |
| VS9H | |
| VS9HD | |
| VS9HD-Secure | |
[10] Above silcer with attachments: Grater Plate No. 14, Julienne Plate No. 25, Shredder
Plates Nos. 9, 000, 3 and 0.
[11] With adjustable stainless steel knife(s).
|
|
Facility : Padova, Italy
|
Slicer |
|
| 1000M[1] | |
| 1000S[2] | |
| 4610[3] | |
| 4612[3] | |
| 6612M[3] | |
| 6612S[3] | |
| 7510[4] | |
| 7512[5] | |
| 8713M[6] | |
| 8713S[7] | |
[1] Certified to NSF/ANSI 8-2010 starting from serial number 10123753. [2] Certified to NSF/ANSI 8-2010 starting from serial number 10123773. [3] Certified to NSF/ANSI 8-2010. [4] Certified to NSF/ANSI 8-2010 starting from serial number 10123789. [5] Certified to NSF/ANSI 8-2010 starting from serial number 10123733. [6] Certified to NSF/ANSI 8-2010 starting from serial number 10123801. [7] Certified to NSF/ANSI 8-2010 starting from serial number 10123821. |
|
| Vollrath Company, L.L.C. (The) | |
| Food Service Division | |
| 1236 North 18th Street | |
| Sheboygan, WI 53082-0611 | |
| United States | |
| 800-624-2051 | |
| 920-459-6558 |
Facility : Varese, Italy
|
Gravity Slicer[1] |
|
| 10.25/N | |
| 10.27/N | |
| 10.30/N | |
| 10.30A/NR | |
| 10.30AF/NR | |
| 10.30F/N | |
| 10.30F/NR | |
| 12.30/N | |
| 12.30A/NR | |
| 12.30AF/NR | |
| 12.30F/N | |
| 12.30F/NR | |
| 12.33/N | |
| 12.33A/NR | |
| 12.33AF/NR | |
| 12.33F/N | |
| 12.33F/NR | |
| 12.35/N | |
| 12.35A/NR | |
| 12.35AF/NR | |
| 12.35F/N | |
| 12.35F/NR | |
| 14.30/N | |
| 14.30F/NR | |
| 14.33/N | |
| 14.33F/NR | |
| 14.35/N | |
| 14.35A/NR | |
| 14.35AF/NR | |
| 14.35F/NR | |
| 510/N | |
| 520/N | |
| 521/N | |
| 81/N | |
| 82/N | |
| 82F/N | |
| 82F/NR | |
| 83/N | |
| 84/N | |
| 84F/N | |
| 84F/NR | |
| 85/N | |
| A-310/N | |
| A300/N | |
| A30F/N | |
| A330/N | |
| A33F/N | |
| A350/N | |
| A35F/N | |
| C-300/N | |
| C-330/N | |
| C-350/N | |
| C-370/N | |
| C33E/N | |
| C33F/N | |
| CA33E/N | |
| CA33F/N | |
| GL-250/N | |
| GL-275/N | |
| GL-300/N | |
| OG22/F/N | |
| OG220/N | |
| SLM0012/N | |
| SLM0014/N | |
| SLR7009/N | |
| SLR7010/N | |
| SLR7012/N | |
| SLR7312/N | |
| SLR7512/N | |
| SLR7612/N | |
| SLR7712/N | |
| SLR7912/N | |
| VS220/N | |
| VS250/N | |
| VS25F/N | |
| VS300/N | |
| VS30F/N | |
[1] Certified to NSF/ANSI 8–2010 starting from serial number C43-00206427-0030. |
|
| Yu Yung Industrial Co., Ltd. | |
| 2-7 Tsou-Tso Lun | |
| Tan-Shui 25126, Taipei County | |
| Taipei, | |
| Taiwan | |
| 886 22 6222 663 |
Facility : Taipei County, Taiwan
|
Vegetable Slicer Accessories |
|
|
Twoyco Complete Vegetable Slicer Attachment[1] |
|
| VS-888 | |
[1] Beginning with serial number: 1210000 |
|
|
Twoyco Complete Vegetable Slicer Attachment with Disc Holder VS-1200DH[3] |
|
| VS-888G | |
| VS-888G22 | |
[3] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64" |
|
|
Twoyco Complete Vegetable Slicer Attachment with Slicer Attachment VS-1200KDS[2] |
|
| VS-888S | |
| VS-888S22 | |
[2] With "S" stainless steel knife |
|
|
Vegetable Slicer Attachments [2] |
|
| VS-1200DH - Disc Holder | |
| VS-1200DH22 - Disc Holder,#22 Power Hubs | |
| VS-1200GD - Grate Plate | |
| VS-1200KDS - Slice Holder[2] | |
| VS-1200KDS22 - Slicer Holder,#22 Power Hubs | |
| VS-1200SD - Shredder Plate[3] | |
| VS-888D-Door | |
| VS-888H-Housing | |
| VS-888H22 - Housing,#22 Power Hubs | |
| VS-888P-Plate With Handle | |
[2] With "S" stainless steel knife [2] With "S" stainless steel knife [3] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64" |
|
Number of matching Manufacturers is 24
Number of matching Products is 572
Processing time was 0 seconds