These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=01440&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Alpha Pipe Fittings Ltd. | |
| 624 Neal Drive | |
| Peterborough, ON K9J 6X7 | |
| Canada | |
| 800-465-1114 | |
| 705-741-0220 |
Facility : Peterborough, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PP |
APF |
ASTM D2609 |
|
Adapters, Barb x MPT |
|||
| 1/2" thru 4" | 1/2" x 3/4" | 1" x 1 1/4" | 3/4" x 1" |
| 1" x 1 1/2" | 3/4" x 1 1/4" | 1 1/4" x 1 1/2" | 1 1/2" x 2" |
|
Coupling, Barb x Barb |
|||
| 1/2" thru 4" | 1/2" x 3/4" | 1" x 1 1/4" | 1/2" x 1" |
| 1" x 1 1/2" | 3/4" x 1" | 1" x 2" | 3/4" x 1 1/4" |
| 1 1/4" x 1 1/2" | 3/4" x 1 1/2" | 1 1/4" x 2" | 1 1/2" x 2" |
|
90° Ell, Barb x Barb |
|||
| 1/2" thru 2" | |||
|
90° Ell, Barb x MPT |
|||
| 1/2" thru 2" | |||
|
Poly Insert Plug, (Barb) |
|||
| 1 1/4" | 1 1/2" | 2" | |
|
Tee, Barb x Barb x Barb |
|||
| 1/2" thru 2" | 3/4" x 3/4" x½" | 1" x 1" x 3/4" | 1¼" x 1¼" x 3/4" |
| 1" x 1" x ½" | 1¼" x 1¼" x ½" | 1¼" x 1¼" x 1" | 1½" x 1½" x ½" |
| 2" x 2" x ½" | 1½" x 1½" x 3/4" | 2" x 2" x 3/4" | 1½" x 1½" x 1" |
| 2" x 2" x 1" | 1½" x 1½" x 1¼" | 2" x 2" x 1¼" | 2" x 2" x 1½" |
| 3/4" x ½" x ½" | 1½" x 1¼" x ½" | 1" x 3/4" x ½" | 1½" x 1¼" x 1" |
| 1" x 3/4" x 3/4" | 1½" x 1¼" x 1¼" | 1¼" x 1" x ½" | 2" x 1½" x 1½" |
| 1¼" x 1" x 3/4" | 1¼" x 1" x 1" | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
NP |
APF |
ASTM D2609 |
|
Adapters (Barb x MPT) |
|||
| 1/2" thru 2" | |||
|
Nylon Insert Venturi Adapter (Insert x MPT) |
|||
| 1¼" | |||
|
Nylon Reducing Adapt (Barb x MPT) |
|||
| 1" x 1½" | 1/2" x 3/4" | 3/4" x 1¼" | 1" x 1¼" |
| 1¼" x 1½" | 3/4" x 1" | 1½" x 2" | |
|
Coupling (Barb x Barb) |
|||
| 1/2" thru 2" | |||
|
Nylon Reducing Coupling (Barb x Barb) |
|||
| 1" x 1½" | 1¼" x 1½" | 1/2" x 3/4" | 3/4" x 1" |
| 3/4" x 1½" | 1" x 1¼" | 1" x 2" | 1¼" x 2" |
| 1/2" x 1" | 3/4" x 1¼" | 1½" x 2" | |
|
90° EII (Barb x Barb) |
|||
| 1/2" thru 2" | |||
|
90° EII (Barb x MPT) |
|||
| 1/2" thru 1½" | |||
|
Nylon Insert Plug (Barb) |
|||
| 1¼" | 1½" | 2" | |
|
Tee (Barb x Barb x Barb) |
|||
| 1/2" thru 2" | |||
|
Nylon Reducing Tee (Barb x Barb x Barb) |
|||
| 1" x 1" x 1/2" | 2" x 2" x 1" | 3/4" x 1/2" x 1/2" | 1" x 3/4" x 3/4" |
| 3/4" x 3/4" x 1/2" | 1½" x 1½" x 3/4" | 1" x 1" x 3/4" | 2" x 2" 3/4" |
| 1" x 3/4" x 1/2" | 1½" x 1½" x 1/2" | 1½" x 1½" x 1" | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC |
APF |
ASTM D2609 |
|
Reducing Elbow (Barb x FIPT) |
|||
| ½" x 3/4" | |||
|
Coupling (Barb x Barb) |
|||
| 3/4" x 3/4" | ½" x ½" | 1" x 1" | |
|
Reducing Coupling (Insert x Insert) |
|||
| 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | |
|
Reducing Tee (Barb x Barb x FIPT) |
|||
| 3/4"x 3/4"x ½" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | |
|
Reducing Elbow (Barb x FIPT) |
|||
| 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | |
|
Female Adapter (Barb x FIPT) |
|||
| 1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" |
| 1 1/2" x 1 1/2" | 2" x 2" | ||
|
Male Reducing Adapter (MIPT x Insert) |
|||
| 1/2" x 1" | 1/2" 3/4" | 3/4" x 1/2" | 3/4" x 1" |
| 1" x 3/4" | |||
|
Male Adapter (MIPT x Barb) |
|||
| 3/4" x 3/4" | ½" x ½" | 1" x 1" | |
|
Tee, (Barb x Barb x FIPT) |
|||
| 1/2" x 1/2" x 1/2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | |
|
Elbow, (Barb x FIPT) |
|||
| 1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | |
|
Insert Plug, (Barb) |
|||
| 1/2" | 3/4" | 1" | 1 1/4" |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 126
Processing time was 0 seconds