These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=03850&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Aquatherm GmbH |  |
| Biggen 5 | |
| D-57439 Attendorn | |
| Germany | |
| 49 27 22 950 0 | |
| Visit this company's website |
Facility : Attendorn, Germany
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+++ [G] |
MLTPL |
Aquatherm Greenpipe® - NPT |
ASTM F2389 |
|
Threaded Back plate Elbow |
|||
| 0620108 (1/2" - 20mm) x 1/2" FIP | 0620110 (1/2" - 20mm) x 3/4" FIP | 0620112 (3/4" - 25mm) x 3/4" FIP | 0620113 (3/4" - 25mm) x 1/2" FIP |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
MLTPL |
Aquatherm Greenpipe® - Wing Back 90 Elbow |
ASTM F2389 |
| 0620158 (1/2" - 20mm) x 1/2" FIP | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
MLTPL |
Aquatherm Greenpipe® Transition Piece |
ASTM F2389 |
| 0621008 (1/2" - 20mm) x 1/2" FIP | 0621010 (1/2" - 20mm) x 3/4" FIP | 0621011 (3/4" - 25mm) x 1/2" FIP | 0621012 (3/4" - 25mm) x 3/4" FIP |
| 0621013 (1" - 32mm) x 3/4" FIP | 0621108 (1/2" - 20mm) x 1/2" FIP | 0621110 (1/2" - 20mm) x 3/4" FIP | 0621111 (3/4" - 25mm) x 1/2" FIP |
| 0621112 (3/4" - 25mm) x 3/4" FIP | 0621113 (1" - 32mm) x 3/4" FIP | 0621114 (1" - 32mm) x 1" FIP | 0621115 (1 1/4" - 40mm) x 1" FIP |
| 0621116 (1 1/4" - 40mm) x 1 1/4" FIP | 0621117 (1 1/2" - 50mm) x 1 1/4" FIP | 0621118 (1.5" - 50mm) x 1.5" FIP | 0621119 (2" - 63mm) x 1.5" FIP |
| 0621120 (2" - 63mm) x 2" FIP | 0621122 (2.5" - 75mm) x 2" FIP | 0621208 (1/2" - 20mm) x 1/2" MIP | 0621210 (1/2" - 20mm) x 3/4" MIP |
| 0621211 (3/4" - 25mm) x 1/2" MIP | 0621212 (3/4" - 25mm) x 3/4" MIP | 0621213 (1" - 32mm) x 3/4" MIP | 0621308 (1/2" - 20mm) x 1/2" MIP |
| 0621310 (1/2" - 20mm) x 3/4" MIP | 0621312 (3/4" - 25mm) x 3/4" MIP | 0621314 (1" - 32mm) x 1" MIP | 0621316 (1" - 32mm) x 1.25" MIP |
| 0621317 (1 1/4" - 40mm) x 1" MIP | 0621318 (1.25" - 40mm) x 1.25" MIP | 0621319 (1.5" - 50mm) x 1.25" MIP | 0621320 (1.5" - 50mm) x 1.5" MIP |
| 0621321 (2" - 63mm) x 1.5" MIP | 0621322 (2" - 63mm) x 2" MIP | 0621323 (2.5" - 75mm) x 2" MIP | 0621324 (2.5" - 75mm) x 2.5" MIP |
| 0621325 (3" - 90mm) x 3" MIP | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
MLTPL |
Aquatherm Greenpipe® - Transition Elbow |
ASTM F2389 |
| 0623008 (1/2" - 20mm) x 3/4" FIP NPT | 0623010 (1/2" - 20mm) x 1/2" FIP NPT | 0623012 (3/4" - 25mm) x 3/4" FIP NPT | 0623014 (3/4" - 25mm) x 1/2" FIP NPT |
| 0623016 (1" - 32mm) x 3/4" FIP NPT | 0623018 (1" - 32mm) x 1" FIP NPT | 0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female | 0623506 (1/2" - 20mm) x 1/2" MIP NPT |
| 0623508 (1/2" - 20mm) x 3/4" MIP NPT | 0623510 (3/4" - 25mm) x 3/4" MIP NPT | 0623512 (1" - 32mm) x 3/4" MIP NPT | 0623514 (1" - 32mm) x 1" MIP NPT |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
MLTPL |
Aquatherm Greenpipe® - Transition Tee |
ASTM F2389 |
| 0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP | 0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP | 0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP | 0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP |
| 0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP | 0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP | 0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP | 0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
MLTPL |
Aquatherm Greenpipe® - Fusion Outlet |
ASTM F2389 |
| 0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP) | 0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP) | 0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP) | 0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP) |
| 0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP) | 0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP) | 0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP) | 0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP) |
| 0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP) | 0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP) | 0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP) | 0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP) |
| 0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP) | 0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP) | 0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP) | 0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP) |
| 0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP) | 0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP) | 0628260 (2.5" / 1" - 75 / 32mm x 1" FIP) | 0628262 (3" / 1" - 90 / 32mm x 1" FIP) |
| 0628264 (3.5" / 1" - 110 / 32mm x 1" FIP) | 0628266 (4" x 1" - 125 / 32mm x 1" FIP) | 0628270 (6" / 1" - 160 / 32mm x 1" FIP) | 0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP) |
| 0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP) | 0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP) | 0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP) | 0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP) |
| 0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP) | 0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP) | 0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP) | 0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP) |
| 0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP) | 0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP) | 0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP) | 0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP) |
| 0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP) | 0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP) | 0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP) | 0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP) |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
MLTPL |
Aquatherm Greenpipe® - NPT |
CSA B137.11 |
|
Threaded Back Plate Elbow |
|||
| 0620108 (1/2" - 20mm) x 1/2" FIP | 0620110 (1/2" - 20mm) x 3/4" FIP | 0620112 (3/4" - 25mm) x 3/4" FIP | 0620113 (3/4" - 25mm) x 1/2" FIP |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
MLTPL |
Aquatherm Greenpipe® - Wing Back 90 Elbow |
CSA B137.11 |
| 0620158 (1/2" - 20mm) x 1/2" FIP | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
MLTPL |
Aquatherm Greenpipe® Transition Piece |
CSA B137.11 |
| 0621008 (1/2" - 20mm) x 1/2" FIP | 0621010 (1/2" - 20mm) x 3/4" FIP | 0621011 (3/4" - 25mm) x 1/2" FIP | 0621012 (3/4" - 25mm) x 3/4" FIP |
| 0621013 (1" - 32mm) x 3/4" FIP | 0621108 (1/2" - 20mm) x 1/2" FIP | 0621111 (3/4" - 25mm) x 1/2" FIP | 0621112 (3/4" - 25mm) x 3/4" FIP |
| 0621113 (1" - 32mm) x 3/4" FIP | 0621114 (1" - 32mm) x 1" FIP | 0621115 (1 1/4" - 40mm) x 1" FIP | 0621116 (1 1/4" - 40mm) x 1 1/4" FIP |
| 0621117 (1 1/2" - 50mm) x 1 1/4" FIP | 0621118 (1.5" - 50mm) x 1.5" FIP | 0621119 (2" - 63mm) x 1.5" FIP | 0621120 (2" - 63mm) x 2" FIP |
| 0621122 (2.5" - 75mm) x 2" FIP | 0621208 (1/2" - 20mm) x 1/2" MIP | 0621210 (1/2" - 20mm) x 3/4" MIP | 0621211 (3/4" - 25mm) x 1/2" MIP |
| 0621212 (3/4" - 25mm) x 3/4" MIP | 0621213 (1" - 32mm) x 3/4" MIP | 0621308 (1/2" - 20mm) x 1/2" MIP | 0621310 (1/2" - 20mm) x 3/4" MIP |
| 0621312 (3/4" - 25mm) x 3/4" MIP | 0621314 (1" - 32mm) x 1" MIP | 0621316 (1" - 32mm) x 1.25" MIP | 0621317 (1 1/4" - 40mm) x 1" MIP |
| 0621318 (1.25" - 40mm) x 1.25" MIP | 0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP | 0621320 (1.5" - 50mm) x 1.5" MIP | 0621321 (2" - 63mm) x 1.5" MIP |
| 0621322 (2" - 63mm) x 2" MIP | 0621323 (2.5" - 75mm) x 2" MIP | 0621324 (2.5" - 75mm) x 2.5" MIP | 0621325 (3" - 90mm) x 3" MIP |
| 0621110 (1/2" - 20mm) x 3/4" FIP | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
MLTPL |
Aquatherm Greenpipe® - Transition Elbow |
CSA B137.11 |
| 0623008 (1/2" - 20mm) x 3/4" FIP NPT | 0623010 (1/2" - 20mm) x 1/2" FIP NPT | 0623012 (3/4" - 25mm) x 3/4" FIP NPT | 0623014 (3/4" - 25mm) x 1/2" FIP NPT |
| 0623016 (1" - 32mm) x 3/4" FIP NPT | 0623018 (1" - 32mm) x 1" FIP NPT | 0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female | 0623506 (1/2" - 20mm) x 1/2" MIP NPT |
| 0623508 (1/2" - 20mm) x 3/4" MIP NPT | 0623510 (3/4" - 25mm) x 3/4" MIP NPT | 0623512 (1" - 32mm) x 3/4" MIP NPT | 0623514 (1" - 32mm) x 1" MIP NPT |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
MLTPL |
Aquatherm Greenpipe® - Transition Tee |
CSA B137.11 |
| 0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP | 0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP | 0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP | 0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP |
| 0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP | 0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP | 0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP | 0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
MLTPL |
Aquatherm Greenpipe® - Fusion Outlet |
CSA B137.11 |
| 0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP) | 0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP) | 0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP) | 0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP) |
| 0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP) | 0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP) | 0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP) | 0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP) |
| 0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP) | 0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP) | 0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP) | 0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP) |
| 0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP) | 0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP) | 0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP) | 0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP) |
| 0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP) | 0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP) | 0628260 (2.5" / 1" - 75 / 32mm x 1" FIP) | 0628262 (3" / 1" - 90 / 32mm x 1" FIP) |
| 0628264 (3.5" / 1" - 110 / 32mm x 1" FIP) | 0628266 (4" x 1" - 125 / 32mm x 1" FIP) | 0628270 (6" / 1" - 160 / 32mm x 1" FIP) | 0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP) |
| 0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP) | 0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP) | 0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP) | 0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP) |
| 0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP) | 0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP) | 0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP) | 0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP) |
| 0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP) | 0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP) | 0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP) | 0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP) |
| 0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP) | 0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP) | 0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP) | 0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP) |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Socket |
ASTM F2389 |
| 0111006 (16 mm) | |||
| 0111008 (20 mm) | |||
| 0111010 (25 mm) | |||
| 0111012 (32 mm) | |||
| 0111014 (40 mm) | |||
| 0111016 (50 mm) | |||
| 0111018 (63 mm) | |||
| 0111020 (75 mm) | |||
| 0111022 (90 mm) | |||
| 0111024 (110 mm) | |||
| 0111026 (125 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Reducer |
ASTM F2389 |
| 0111109 (20/16 mm) | |||
| 0111110 (25/16 mm) | |||
| 0111112 (25/20 mm) | |||
| 0111114 (32/20 mm) | |||
| 0111116 (32/25 mm) | |||
| 0111118 (40/20 mm) | |||
| 0111120 (40/25 mm) | |||
| 0111122 (40/32 mm) | |||
| 0111124 (50/20 mm) | |||
| 0111126 (50/25 mm) | |||
| 0111128 (50/32 mm) | |||
| 0111130 (50/40 mm) | |||
| 0111131 (63/20 mm) | |||
| 0111132 (63/25 mm) | |||
| 0111134 (63/32 mm) | |||
| 0111136 (63/40 mm) | |||
| 0111138 (63/50 mm) | |||
| 0111139 (75/40 mm) | |||
| 0111140 (75/50 mm) | |||
| 0111142 (75/63 mm) | |||
| 0111143 (75/20 mm) | |||
| 0111144 (75/25 mm) | |||
| 0111145 (75/32 mm) | |||
| 0111151 (90/50 mm) | |||
| 0111152 (90/63 mm) | |||
| 0111153 (90/75 mm) | |||
| 0111155 (110/63 mm) | |||
| 0111157 (110/75 mm) | |||
| 0111159 (110/90 mm) | |||
| 0111161 (125/75 mm) | |||
| 0111163 (125/90 mm) | |||
| 0111165 (125/110 mm) | |||
| 0111174 (160/110 mm) SDR 7.4 | |||
| 0111175 (160/110 mm) SDR 11 | |||
| 0111176 (160/125 mm) SDR 7.4 | |||
| 0111177 (160/125 mm) SDR 11 | |||
| 0111184 (200/160 mm) SDR 7.4 | |||
| 0111185 (200/160 mm) SDR 11 | |||
| 0111190 (250/200 mm) SDR 7.4 | |||
| 0111191 (250/200 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Reducing Socket |
ASTM F2389 |
| 0111238 (63/50 mm) | |||
| 0111242 (75/63 mm) | |||
| 0111253 (90/75 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Elbow 45° |
ASTM F2389 |
| 0112506 (16 mm) | |||
| 0112508 (20 mm) | |||
| 0112510 (25 mm) | |||
| 0112512 (32 mm) | |||
| 0112514 (40 mm) | |||
| 0112516 (50 mm) | |||
| 0112518 (63 mm) | |||
| 0112520 (75 mm) | |||
| 0112522 (90 mm) | |||
| 0112524 (110 mm) | |||
| 0112526 (125 mm) | |||
| 0112530 (160 mm) SDR 7.4 | |||
| 0112531 (160 mm) SDR 11 | |||
| 0112534 (200 mm) SDR 7.4 | |||
| 0112535 (200 mm) SDR 11 | |||
| 0112538 (250 mm) SDR 7.4 | |||
| 0112539 (250 mm) SDR 11 | |||
| 0112708 (20 mm Internal/External) | |||
| 0112710 (25 mm Internal/External) | |||
| 0112712 (32 mm Internal/External) | |||
| 0112714 (40 mm Internal/External) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Elbow 90° |
ASTM F2389 |
| 0112106 (16 mm) | |||
| 0112108 (20 mm) | |||
| 0112110 (25 mm) | |||
| 0112112 (32 mm) | |||
| 0112114 (40 mm) | |||
| 0112116 (50 mm) | |||
| 0112118 (63 mm) | |||
| 0112120 (75 mm) | |||
| 0112122 (90 mm) | |||
| 0112124 (110 mm) | |||
| 0112126 (125 mm) | |||
| 0112130 (160 mm) SDR 7.4 | |||
| 0112131 (160 mm) SDR 11 | |||
| 0112134 (200 mm) SDR 7.4 | |||
| 0112135 (200 mm) SDR 11 | |||
| 0112138 (250 mm) SDR 7.4 | |||
| 0112139 (250 mm) SDR 11 | |||
| 0112306 (16 mm Internal/External) | |||
| 0112308 (20 mm Internal/External) | |||
| 0112310 (25 mm Internal/External) | |||
| 0112312 (32 mm Internal/External) | |||
| 0112314 (40 mm Internal/External) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Tee |
ASTM F2389 |
| 0113106 (16 mm) | |||
| 0113108 (20 mm) | |||
| 0113110 (25 mm) | |||
| 0113112 (32 mm) | |||
| 0113114 (40 mm) | |||
| 0113116 (50 mm) | |||
| 0113118 (63 mm) | |||
| 0113120 (75 mm) | |||
| 0113122 (90 mm) | |||
| 0113124 (110 mm) | |||
| 0113126 (125 mm) | |||
| 0113130 (160 mm) SDR 7.4 | |||
| 0113131 (160 mm) SDR 11 | |||
| 0113134 (200 mm) SDR 7.4 | |||
| 0113135 (200 mm) SDR 11 | |||
| 0113138 (250 mm) SDR 7.4 | |||
| 0113139 (250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Reducing Tee |
ASTM F2389 |
| 0113506 (20 mm x 16 mm x 16 mm) | |||
| 0113508 (20 mm x 16 mm x 20 mm) | |||
| 0113510 (20 mm x 20 mm x 16 mm) | |||
| 0113511 (20 mm x 25 mm x 20 mm) | |||
| 0113512 (25 mm x 16 mm x 16 mm) | |||
| 0113514 (25 mm x 16 mm x 20 mm) | |||
| 0113516 (25 mm x 16 mm x 25 mm) | |||
| 0113518 (25 mm x 20 mm x 16 mm) | |||
| 0113520 (25 mm x 20 mm x 20 mm) | |||
| 0113522 (25 mm x 20 mm x 25 mm) | |||
| 0113528 (32 mm x 16 mm x 32 mm) | |||
| 0113532 (32 mm x 20 mm x 20 mm) | |||
| 0113534 (32 mm x 20 mm x 32 mm) | |||
| 0113538 (32 mm x 25 mm x 25 mm) | |||
| 0113540 (32 mm x 25 mm x 32 mm) | |||
| 0113542 (40 mm x 20 mm x 40 mm) | |||
| 0113544 (40 mm x 25 mm x 40 mm) | |||
| 0113546 (40 mm x 32 mm x 40 mm) | |||
| 0113547 (50 mm x 20 mm x 50 mm) | |||
| 0113548 (50 mm x 25 mm x 50 mm) | |||
| 0113550 (50 mm x 32 mm x 50 mm) | |||
| 0113551 (50 mm x 40 mm x 50 mm) | |||
| 0113552 (63 mm x 20 mm x 63 mm) | |||
| 0113554 (63 mm x 25 mm x 63 mm) | |||
| 0113556 (63 mm x 32 mm x 63 mm) | |||
| 0113558 (63 mm x 40 mm x 63 mm) | |||
| 0113560 (63 mm x 50 mm x 63 mm) | |||
| 0113561 (75 mm x 20 mm x 75 mm) | |||
| 0113562 (75 mm x 25 mm x 75 mm) | |||
| 0113564 (75 mm x 32 mm x 75 mm) | |||
| 0113566 (75 mm x 40 mm x 75 mm) | |||
| 0113568 (75 mm x 50 mm x 75 mm) | |||
| 0113570 (75 mm x 63 mm x 75 mm) | |||
| 0113576 (90 mm x 32 mm x 90 mm) | |||
| 0113578 (90 mm x 40 mm x 90 mm) | |||
| 0113580 (90 mm x 50 mm x 90 mm) | |||
| 0113582 (90 mm x 63 mm x 90 mm) | |||
| 0113584 (90 mm x 75 mm x 90 mm) | |||
| 0113586 (110 mm x 63 mm x 110 mm) | |||
| 0113588 (110 mm x 75 mm x 110 mm) | |||
| 0113590 (110 mm x 90 mm x 110 mm) | |||
| 0113592 (125 mm x 75 mm x 125 mm) | |||
| 0113594 (125 mm x 90 mm x 125 mm) | |||
| 0113596 (125 mm x 110 mm x 125 mm) | |||
| 0113600 (160 mm x 75 mm x 160 mm) SDR 7.4 | |||
| 0113601 (160 mm x 75 mm x 160 mm) SDR 11 | |||
| 0113602 (160 mm x 90 mm x 160 mm) SDR 7.4 | |||
| 0113603 (160 mm x 90 mm x 160 mm) SDR 11 | |||
| 0113608 (200 mm x 75 mm x 200 mm) SDR 7.4 | |||
| 0113609 (200 mm x 75 mm x 200 mm) SDR 11 | |||
| 0113610 (200 mm x 90 mm x 200 mm) SDR 7.4 | |||
| 0113611 (200 mm x 90 mm x 200 mm) SDR 11 | |||
| 0113612 (200 mm x 110 mm x 200 mm) SDR 7.4 | |||
| 0113613 (200 mm x 110 mm x 200 mm) SDR 11 | |||
| 0113614 (200 mm x 125 mm x 200 mm) SDR 7.4 | |||
| 0113615 (200 mm x 125 mm x 200 mm) SDR 11 | |||
| 0113624 (250 mm x 75 mm x 250 mm) SDR 7.4 | |||
| 0113625 (250 mm x 75 mm x 250 mm) SDR 11 | |||
| 0113626 (250 mm x 90 mm x 250 mm) SDR 7.4 | |||
| 0113627 (250 mm x 90 mm x 250 mm) SDR 11 | |||
| 0113628 (250 mm x 110 mm x 250 mm) SDR 7.4 | |||
| 0113629 (250 mm x 110 mm x 250 mm) SDR 11 | |||
| 0113630 (250 mm x 125 mm x 250 mm) SDR 7.4 | |||
| 0113631 (250 mm x 125 mm x 250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Cross |
ASTM F2389 |
| 0113708 (20 mm) | |||
| 0113710 (25 mm) | |||
| 0113712 (32 mm) | |||
| 0113714 (40 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® End Cap |
ASTM F2389 |
| 0114106 (16 mm) | |||
| 0114108 (20 mm) | |||
| 0114110 (25 mm) | |||
| 0114112 (32 mm) | |||
| 0114114 (40 mm) | |||
| 0114116 (50 mm) | |||
| 0114118 (63 mm) | |||
| 0114120 (75 mm) | |||
| 0114122 (90 mm) | |||
| 0114124 (110 mm) | |||
| 0114126 (125 mm) | |||
| 0114130 (160 mm) SDR 7.4 | |||
| 0114131 (160 mm) SDR 11 | |||
| 0114134 (200 mm) SDR 7.4 | |||
| 0114135 (200 mm) SDR 11 | |||
| 0114138 (250 mm) SDR 7.4 | |||
| 0114139 (250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Fusion Outlet (Saddle) |
ASTM F2389 |
| 0115156 (40/20 mm) | |||
| 0115158 (40/25 mm) | |||
| 0115160 (50/20 mm) | |||
| 0115162 (50/25 mm) | |||
| 0115164 (63/20 mm) | |||
| 0115166 (63/25 mm) | |||
| 0115168 (63/32 mm) | |||
| 0115170 (75/20 mm) | |||
| 0115172 (75/25 mm) | |||
| 0115174 (75/32 mm) | |||
| 0115175 (75/40 mm) | |||
| 0115176 (90/20 mm) | |||
| 0115178 (90/25 mm) | |||
| 0115180 (90/32 mm) | |||
| 0115181 (90/40 mm) | |||
| 0115182 (110/20 mm) | |||
| 0115184 (110/25 mm) | |||
| 0115186 (110/32 mm) | |||
| 0115188 (110/40 mm) | |||
| 0115189 (110/50 mm) | |||
| 0115190 (125/20 mm) | |||
| 0115192 (125/25 mm) | |||
| 0115194 (125/32 mm) | |||
| 0115196 (125/40 mm) | |||
| 0115197 (125/50 mm) | |||
| 0115198 (125/63 mm) | |||
| 0115206 (160/20 mm) | |||
| 0115208 (160/25 mm) | |||
| 0115210 (160/32 mm) | |||
| 0115212 (160/40 mm) | |||
| 0115214 (160/50 mm) | |||
| 0115216 (160/63 mm) | |||
| 0115228 (200 - 250/20 mm) | |||
| 0115229 (200 - 250/25 mm) | |||
| 0115230 (200 - 250/32 mm) | |||
| 0115231 (200/40 mm) | |||
| 0115232 (200/50 mm) | |||
| 0115233 (200/63 mm) | |||
| 0115251 (250/40 mm) | |||
| 0115252 (250/50 mm) | |||
| 0115253 (250/63 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings$ * +++ [G] |
PP |
Aquatherm greenpipe® Flange Adapter |
ASTM F2389 |
| 0115512 (32 mm) | |||
| 0115514 (40 mm) | |||
| 0115516 (50 mm) | |||
| 0115518 (63 mm) | |||
| 0115520 (75 mm) | |||
| 0115522 (90 mm) | |||
| 0115524 (110 mm) | |||
| 0115526 (125 mm - Only with Fitting) | |||
| 0115527 (125 mm) | |||
| 0115530 (160 mm) SDR 7.4 | |||
| 0115531 (160 mm) SDR 11 | |||
| 0115534 (200 mm) SDR 7.4 | |||
| 0115535 (200 mm) SDR 11 | |||
| 0115538 (250 mm) SDR 7.4 | |||
| 0115539 (250 mm) SDR 11 | |||
$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings$ * +++ [G] |
PP |
Aquatherm greenpipe® Flange |
ASTM F2389 |
| 0115712 (32 mm) | |||
| 0115714 (40 mm) | |||
| 0115716 (50 mm) | |||
| 0115718 (63 mm) | |||
| 0115720 (75 mm) | |||
| 0115722 (90 mm) | |||
| 0115724 (110 mm) | |||
| 0115726 (125 mm) | |||
| 0115730 (160 mm) | |||
| 0115734 (200 mm) | |||
| 0115738 (250 mm) | |||
$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ |
PP |
Aquatherm greenpipe® Coupling Screw |
ASTM F2389 |
| 0115838 (Joint - PP - 20 mm)[G] | |||
|
0115840 (Joint - PP - 25 mm)[G] |
|||
|
0115842 (Joint - PP - 32 mm)[G] |
|||
|
0115844 (Joint - PP - 40 mm)[G] |
|||
|
0115846 (Joint - PP - 50 mm)[G] |
|||
|
0115848 (Joint - PP - 63 mm)[G] |
|||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Overbridgebow |
ASTM F2389 |
| 0116106 (16 mm) | |||
| 0116108 (20 mm) | |||
| 0116110 (25 mm) | |||
| 0116112 (32 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Electrofusion |
ASTM F2389 |
| 0117208 (Socket - 20 mm) | |||
| 0117210 (Socket - 25 mm) | |||
| 0117212 (Socket - 32 mm) | |||
| 0117214 (Socket - 40 mm) | |||
| 0117216 (Socket - 50 mm) | |||
| 0117218 (Socket - 63 mm) | |||
| 0117220 (Socket - 75 mm) | |||
| 0117222 (Socket - 90 mm) | |||
| 0117224 (Socket - 110 mm) | |||
| 0117226 (Socket - 125 mm) | |||
| 0117230 (Socket - 160 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Back Plate Elbow |
ASTM F2389 |
| 0120106 (16 mm x 1/2" F) | |||
| 0120108 (20 mm x 1/2" F) | |||
| 0120110 (20 mm x 3/4" F) | |||
| 0120112 (25 mm x 3/4" F) | |||
| 0120113 (25 mm x 1/2" F) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Cavity Wall |
ASTM F2389 |
| 0120114 (Fitting - 1/2") | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Insulation |
ASTM F2389 |
| 0120120 (Cleading for Wall Disk 1/2") | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe& * +++ [G] |
PP |
Aquatherm greenpipe® |
ASTM F2389 |
| 0610006 (16 mm) SDR 6 | |||
| 0610008 (20 mm) SDR 6 | |||
| 0610010 (25 mm) SDR 6 | |||
| 0610012 (32 mm) SDR 6 | |||
| 0610014 (40 mm) SDR 6 | |||
| 0610016 (50 mm) SDR 6 | |||
| 0610018 (63 mm) SDR 6 | |||
| 0610020 (75 mm) SDR 6 | |||
| 0610022 (90 mm) SDR 6 | |||
| 0610024 (110 mm) SDR 6 | |||
| 0610106 (16 mm - Coil: 100 m) SDR 6 | |||
| 0610108 (20 mm - Coil: 100 m) SDR 6 | |||
| 0610110 (25 mm - Coil: 100 m) SDR 6 | |||
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe& * +++ [G] |
PP |
Aquatherm greenpipe® |
ASTM F2389 |
| 0610806 (16 mm) SDR 7.4 | |||
| 0610808 (20 mm) SDR 7.4 | |||
| 0610810 (25 mm) SDR 7.4 | |||
| 0610812 (32 mm) SDR 7.4 | |||
| 0610814 (40 mm) SDR 7.4 | |||
| 0610816 (50 mm) SDR 7.4 | |||
| 0610818 (63 mm) SDR 7.4 | |||
| 0610820 (75 mm) SDR 7.4 | |||
| 0610822 (90 mm) SDR 7.4 | |||
| 0610824 (110 mm) SDR 7.4 | |||
| 0610906 (16 mm - Coil: 100 m) SDR 7.4 | |||
| 0610908 (20 mm - Coil: 100 m) SDR 7.4 | |||
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe& * +++ [G] |
PP |
Aquatherm greenpipe® Faser |
ASTM F2389 |
| 0670708 (20 mm) SDR 7.4 | |||
| 0670710 (25 mm) SDR 7.4 | |||
| 0670712 (32 mm) SDR 7.4 | |||
| 0670714 (40 mm) SDR 7.4 | |||
| 0670716 (50 mm) SDR 7.4 | |||
| 0670718 (63 mm) SDR 7.4 | |||
| 0670720 (75 mm) SDR 7.4 | |||
| 0670722 (90 mm) SDR 7.4 | |||
| 0670724 (110 mm) SDR 7.4 | |||
| 0670726 (125 mm) SDR 7.4 | |||
| 0670730 (160 mm) SDR 7.4 | |||
| 0670734 (200 mm) SDR 7.4 | |||
| 0670738 (250 mm) SDR 7.4 | |||
| 70742 (315 mm) SDR 7.4 | |||
| 70744 (355 mm) SDR 7.4 | |||
| 0670758 (UV - 20 mm) SDR 7.4 | |||
| 0670760 (UV - 25 mm) SDR 7.4 | |||
| 0670762 (UV - 32 mm) SDR 7.4 | |||
| 0670764 (UV - 40 mm) SDR 7.4 | |||
| 0670766 (UV - 50 mm) SDR 7.4 | |||
| 0670768 (UV - 63 mm) SDR 7.4 | |||
| 0670770 (UV - 75 mm) SDR 7.4 | |||
| 0670772 (UV - 90 mm) SDR 7.4 | |||
| 0670774 (UV - 110 mm) SDR 7.4 | |||
| 0670776 (UV - 125 mm) SDR 7.4 | |||
| 0670780 (UV - 160 mm) SDR 7.4 | |||
| 0670784 (UV - 200 mm) SDR 7.4 | |||
| 0670788 (UV - 250 mm) SDR 7.4 | |||
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Cavity Wall Disk |
ASTM F2389 |
| 0120156 (16 mm x 1/2" F) | |||
| 0120158 (20 mm x 1/2" F) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Transition Elbow |
ASTM F2389 |
| 0120206 (16 mm x 1/2" F x 3/4" M) | |||
| 0120208 (20 mm x 1/2" F x 3/4" M) | |||
| 0120209 (25 mm x 1/2" F x 3/4" M) | |||
| 0120210 (20 mm x 1/2" F x 3/4" M - 30 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Transition Piece |
ASTM F2389 |
| 0120204 (20 mm x 1/2" F x 3/4" M) | |||
| 0121006 (Round - 16 mm x 1/2" F) | |||
| 0121008 (Round - 20 mm x 1/2" F) | |||
| 0121010 (Round - 20 mm x 3/4" F) | |||
| 0121011 (Round - 25 mm x 1/2" F) | |||
| 0121012 (Round - 25 mm x 3/4" F) | |||
| 0121013 (Round - 32 mm x 3/4" F) | |||
| 0121106 (Hexagon - 16 mm x 1/2" F) | |||
| 0121108 (Hexagon - 20 mm x 1/2" F) | |||
| 0121110 (Hexagon - 20 mm x 3/4" F) | |||
| 0121111 (Hexagon - 25 mm x 1/2" F) | |||
| 0121112 (Hexagon - 25 mm x 3/4" F) | |||
| 0121113 (Hexagon - 32 mm x 3/4" F) | |||
| 0121114 (Hexagon - 32 mm x 1" F) | |||
| 0121115 (Hexagon - 40 mm x 1" F) | |||
| 0121116 (Hexagon - 40 mm x 1 1/4" F) | |||
| 0121117 (Hexagon - 50 mm x 1 1/4" F) | |||
| 0121118 (Hexagon - 50 mm x 1 1/2" F) | |||
| 0121119 (Hexagon - 63 mm x 1 1/2" F) | |||
| 0121120 (Hexagon - 63 mm x 2" F) | |||
| 0121122 (Hexagon - 75 mm x 2" F) | |||
| 0121206 (Round - 16 mm x 1/2" M) | |||
| 0121208 (Round - 20 mm x 1/2" M) | |||
| 0121210 (Round - 20 mm x 3/4" M) | |||
| 0121211 (Round - 25 mm x 1/2" M) | |||
| 0121212 (Round - 25 mm x 3/4" M) | |||
| 0121213 (Round - 32 mm x 3/4" M) | |||
| 0121306 (Hexagon - 16 mm x 1/2" M) | |||
| 0121308 (Hexagon - 20 mm x 1/2" M) | |||
| 0121310 (Hexagon - 20 mm x 3/4" M) | |||
| 0121312 (Hexagon - 25 mm x 3/4" M) | |||
| 0121314 (Hexagon - 32 mm x 1" M) | |||
| 0121316 (Hexagon - 32 mm x 1 1/4" M) | |||
| 0121317 (Hexagon - 40 mm x 1" M) | |||
| 0121318 (Hexagon - 40 mm x 1 1/4" M) | |||
| 0121319 (Hexagon - 50 mm x 1 1/4" M) | |||
| 0121320 (Hexagon - 50 mm x 1 1/2" M) | |||
| 0121321 (Hexagon - 63 mm x 1 1/2" M) | |||
| 0121322 (Hexagon - 63 mm x 2" M) | |||
| 0121323 (Hexagon - 75 mm x 2" M) | |||
| 0121324 (Hexagon - 75 mm x 2 1/2" M) | |||
| 0121325 (Hexagon - 90 mm x 3" M) | |||
| 0121327 (Hexagon - 110 mm x 4" M) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Adapter - Round |
ASTM F2389 |
| 0121258 (Self Sealing - 20 mm x 1/2" M) | |||
| 0121261 (Self Sealing - 25 mm x 1/2" M) | |||
| 0121262 (Self Sealing - 25 mm x 3/4" M) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Adapter - Hex |
ASTM F2389 |
| 0121355 (Self Sealing - 20 mm x 1/2" M) | |||
| 0121356 (Self Sealing - 16 mm x 1/2" M) | |||
| 0121358 (Self Sealing - 20 mm x 1/2" M) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Transition Elbow |
ASTM F2389 |
| 0123006 (16 mm x 1/2" F) | |||
| 0123008 (20 mm x 3/4" F) | |||
| 0123010 (20 mm x 1/2" F) | |||
| 0123012 (25 mm x 3/4" F) | |||
| 0123014 (25 mm x 1/2" F) | |||
| 0123016 (32 mm x 3/4" F) | |||
| 0123018 (32 mm x 1" F) | |||
| 0123208 (20 mm External x 1/2" F) | |||
| 0123504 (16 mm x 1/2" M) | |||
| 0123506 (20 mm x 1/2" M) | |||
| 0123508 (20 mm x 3/4" M) | |||
| 0123510 (25 mm x 3/4" M) | |||
| 0123512 (32 mm x 3/4" M) | |||
| 0123514 (32 mm x 1" M) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Transition Tee |
ASTM F2389 |
| 0125004 (16 x 1/2" F x 16 mm) | |||
| 0125006 (20 x 1/2" F x 20 mm) | |||
| 0125008 (20 x 3/4" F x 20 mm) | |||
| 0125010 (25 x 1/2" F x 25 mm) | |||
| 0125012 (25 x 3/4" F x 25 mm) | |||
| 0125014 (32 x 3/4" F x 32 mm) | |||
| 0125016 (32 x 1" F x 32 mm) | |||
| 0125022 (50 x 1" F x 50 mm) | |||
| 0125506 (20 x 1/2" M x 20 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Adapter |
ASTM F2389 |
| 0126608 (20 mm x 1/2" M) | |||
| 0126610 (25 mm x 3/4" M) | |||
| 0126612 (32 mm x 1" M) | |||
| 0126614 (40 mm x 1 1/4" M) | |||
| 0126616 (50 mm x 1 1/2" M) | |||
| 0126618 (63 mm x 2" M) | |||
| 0126638 (20 mm x 1/2" F) | |||
| 0126640 (25 mm x 3/4" F) | |||
| 0126642 (32 mm x 1" F) | |||
| 0126644 (40 mm x 1 1/4" F) | |||
| 0126646 (50 mm x 1 1/2" F) | |||
| 0126648 (63 mm x 2" F) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Connecting Union |
ASTM F2389 |
| 0126708 (L - 100 mm - 20 mm x Nut G 1") | |||
| 0126710 (L - 100 mm - 25 mm x Nut G 1 1/4") | |||
| 0126712 (L - 100 mm - 32 mm x Nut G 1 1/2") | |||
| 0126714 (L - 100 mm - 40 mm x Nut G 2") | |||
| 0126716 (L - 100 mm - 50 mm x Nut G 2 1/4") | |||
| 0126718 (L - 100 mm - 63 mm x Nut G 2 3/4") | |||
| 0126720 (L - 100 mm - 75 mm x Nut G 3 1/2") | |||
| 0126722 (L - 100 mm - 90 mm x Nut G 4") | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Water Meter Union |
ASTM F2389 |
| 0126808 (20 mm x Nut G 3/4") | |||
| 0126810 (25 mm x Nut G 3/4") | |||
| 0126812 (32 mm x Nut G 3/4") | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Adapter |
ASTM F2389 |
| 0127010 (ISO - 20 mm x Nut G 1") | |||
| 0127011 (ISO - 25 mm x Nut G 1") | |||
| 0127012 (ISO - 25 mm x Nut G 1 1/4") | |||
| 0127013 (ISO - 32 mm x Nut G 1 1/4") | |||
| 0127014 (ISO - 32 mm x Nut G 1 1/2") | |||
| 0127015 (ISO - 40 mm x Nut G 1 1/2") | |||
| 0127016 (ISO - 40 mm x Nut G 2") | |||
| 0127017 (ISO - 50 mm x Nut G 2") | |||
| 0127018 (ISO - 50 mm x Nut G 2 1/4") | |||
| 0127019 (ISO - 63 mm x Nut G 2 1/4") | |||
| 0127020 (ISO - 63 mm x Nut G 2 3/4") | |||
| 0127021 (ISO - 75 mm x Nut G 2 3/4") | |||
| 0127022 (ISO - 75 mm x Nut G 3 1/2") | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Counterpart for |
ASTM F2389 |
| 0127310 (ISO Joint - 20 mm x 1" M) | |||
| 0127311 (ISO Joint - 25 mm x 1" M) | |||
| 0127312 (ISO Joint - 25 mm x 1 1/4" M) | |||
| 0127313 (ISO Joint - 32 mm x 1 1/4" M) | |||
| 0127314 (ISO Joint - 32 mm x 1 1/2" M) | |||
| 0127315 (ISO Joint - 40 mm x 1 1/2" M) | |||
| 0127316 (ISO Joint - 40 mm x 2" M) | |||
| 0127317 (ISO Joint - 50 mm x 2" M) | |||
| 0127318 (ISO Joint - 50 mm x 2 1/4" M) | |||
| 0127319 (ISO Joint - 63 mm x 2 1/4" M) | |||
| 0127320 (ISO Joint - 63 mm x 2 3/4" M) | |||
| 0127321 (ISO Joint - 75 mm x 2 3/4" M) | |||
| 0127322 (ISO Joint - 75 mm x 3 1/2" M) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Fusion Outlet (Saddle) |
ASTM F2389 |
| 0128214 (Hexagon - 40/25 mm x 1/2" F) | |||
| 0128216 (Hexagon - 50/25 mm x 1/2" F) | |||
| 0128218 (Hexagon - 63/25 mm x 1/2" F) | |||
| 0128220 (Hexagon - 75/25 mm x 1/2" F) | |||
| 0128222 (Hexagon - 90/25 mm x 1/2" F) | |||
| 0128224 (Hexagon - 110/25 mm x 1/2" F) | |||
| 0128226 (Hexagon - 125/25 mm x 1/2" F) | |||
| 0128230 (Hexagon - 160/25 mm x 1/2" F) | |||
| 0128232 (Hexagon - 200-250/25 mm x 1/2" F) | |||
| 0128234 (Hexagon - 40/25 mm x 3/4" F) | |||
| 0128236 (Hexagon - 50/25 mm x 3/4" F) | |||
| 0128238 (Hexagon - 63/25 mm x 3/4" F) | |||
| 0128240 (Hexagon - 75/25 mm x 3/4" F) | |||
| 0128242 (Hexagon - 90/25 mm x 3/4" F) | |||
| 0128244 (Hexagon - 110/25 mm x 3/4" F) | |||
| 0128246 (Hexagon - 125/25 mm x 3/4" F) | |||
| 0128250 (Hexagon - 160/25 mm x 3/4" F) | |||
| 0128254 (Hexagon - 200 - 250/25 mm x 3/4" F) | |||
| 0128260 (Hexagon - 75/32 mm x 1" F) | |||
| 0128262 (Hexagon - 90/32 mm x 1" F) | |||
| 0128264 (Hexagon - 110/32 mm x 1" F) | |||
| 0128266 (Hexagon - 125/32 mm x 1" F) | |||
| 0128270 (Hexagon - 160/32 mm x 1" F) | |||
| 0128274 (Hexagon - 200 - 250/32 mm x 1" F) | |||
| 0128314 (40/25 mm x 1/2" M) | |||
| 0128316 (50/25 mm x 1/2" M) | |||
| 0128318 (63/25 mm x 1/2" M) | |||
| 0128320 (75/25 mm x 1/2" M) | |||
| 0128322 (90/25 mm x 1/2" M) | |||
| 0128324 (110/25 mm x 1/2" M) | |||
| 0128326 (125/25 mm x 1/2" M) | |||
| 0128330 (160/25 mm x 1/2" M) | |||
| 0128334 (40/25 mm x 3/4" M) | |||
| 0128336 (50/25 mm x 3/4" M) | |||
| 0128338 (63/25 mm x 3/4" M) | |||
| 0128340 (75/25 mm x 3/4" M) | |||
| 0128342 (90/25 mm x 3/4" M) | |||
| 0128344 (110/25 mm x 3/4" M) | |||
| 0128346 (125/25 mm x 3/4" M) | |||
| 0128350 (160/25 mm x 3/4" M) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Distribut. Block |
ASTM F2389 |
| 0130115 (Sanitary - 20/25 mm) | |||
| 0130130 (with Insulation & Art. 30115) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® 4-Port Manifold |
ASTM F2389 |
| 0130602 (32 mm x 16 mm) | |||
| 0130604 (32 mm x 20 mm) | |||
| 0130804 (End Piece - 32 mm x 1/2" F) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Globe Valve |
ASTM F2389 |
| 0140808 (20 mm) | |||
| 0140810 (25 mm) | |||
| 0140812 (32 mm) | |||
| 0140814 (40 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
PP |
Aquatherm greenpipe® Concealed Valve |
ASTM F2389 |
| 0140858 (Chrome Plated - 20 mm) | |||
| 0140860 (Chrome Plated - 25 mm) | |||
| 0140862 (Chrome Plated - 32 mm) | |||
| 0140868 (Tamper-Proof - Short - 20 mm) | |||
| 0140870 (Tamper-Proof - Short - 25 mm) | |||
| 0140872 (Tamper-Proof - Short - 32 mm) | |||
| 0140878 (Flexible Insta. Depth - 20 mm) | |||
| 0140880 (Flexible Insta. Depth - 25 mm) | |||
| 0140882 (Flexible Insta. Depth - 32 mm) | |||
| 0140888 (Tamper-Proof - Long - 20 mm) | |||
| 0140890 (Tamper-Proof - Long - 25 mm) | |||
| 0140892 (Tamper-Proof - Long - 32 mm) | |||
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe& * ¢ +++ [G] |
PP |
Aquatherm greenpipe® Pipe |
CSA B137.11 |
| 0610006 (16 mm) SDR 6 | |||
| 0610008 (20 mm) SDR 6 | |||
| 0610010 (25 mm) SDR 6 | |||
| 0610012 (32 mm) SDR 6 | |||
| 0610014 (40 mm) SDR 6 | |||
| 0610016 (50 mm) SDR 6 | |||
| 0610018 (63 mm) SDR 6 | |||
| 0610020 (75 mm) SDR 6 | |||
| 0610022 (90 mm) SDR 6 | |||
| 0610024 (110 mm) SDR 6 | |||
| 0610106 (16 mm - Coil: 100 m) SDR 6 | |||
| 0610108 (20 mm - Coil: 100 m) SDR 6 | |||
| 0610110 (25 mm - Coil: 100 m) SDR 6 | |||
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe& * ¢ +++ [G] |
PP |
Aquatherm greenpipe® Pipe |
CSA B137.11 |
| 0610806 (16 mm) SDR 7.4 | |||
| 0610808 (20 mm) SDR 7.4 | |||
| 0610810 (25 mm) SDR 7.4 | |||
| 0610812 (32 mm) SDR 7.4 | |||
| 0610814 (40 mm) SDR 7.4 | |||
| 0610816 (50 mm) SDR 7.4 | |||
| 0610818 (63 mm) SDR 7.4 | |||
| 0610820 (75 mm) SDR 7.4 | |||
| 0610822 (90 mm) SDR 7.4 | |||
| 0610824 (110 mm) SDR 7.4 | |||
| 0610906 (16 mm - Coil: 100 m) SDR 7.4 | |||
| 0610908 (20 mm - Coil: 100 m) SDR 7.4 | |||
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe& * ¢ +++ [G] |
PP |
Aquatherm greenpipe® Faser |
CSA B137.11 |
| 0670708 (20 mm) SDR 7.4 | |||
| 0670710 (25 mm) SDR 7.4 | |||
| 0670712 (32 mm) SDR 7.4 | |||
| 0670714 (40 mm) SDR 7.4 | |||
| 0670716 (50 mm) SDR 7.4 | |||
| 0670718 (63 mm) SDR 7.4 | |||
| 0670720 (75 mm) SDR 7.4 | |||
| 0670722 (90 mm) SDR 7.4 | |||
| 0670724 (110 mm) SDR 7.4 | |||
| 0670726 (125 mm) SDR 7.4 | |||
| 0670730 (160 mm) SDR 7.4 | |||
| 0670734 (200 mm) SDR 7.4 | |||
| 0670738 (250 mm) SDR 7.4 | |||
| 0670758 (UV - 20 mm) SDR 7.4 | |||
| 0670760 (UV - 25 mm) SDR 7.4 | |||
| 0670762 (UV - 32 mm) SDR 7.4 | |||
| 0670764 (UV - 40 mm) SDR 7.4 | |||
| 0670766 (UV - 50 mm) SDR 7.4 | |||
| 0670768 (UV - 63 mm) SDR 7.4 | |||
| 0670770 (UV - 75 mm) SDR 7.4 | |||
| 0670772 (UV - 90 mm) SDR 7.4 | |||
| 0670774 (UV - 110 mm) SDR 7.4 | |||
| 0670776 (UV - 125 mm) SDR 7.4 | |||
| 0670780 (UV - 160mm) SDR 7.4 | |||
| 0670784 (UV - 200mm) SDR 7.4 | |||
| 0670788 (UV - 250mm) SDR 7.4 | |||
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Socket |
CSA B137.11 |
| 0111006 (16 mm) | |||
| 0111008 (20 mm) | |||
| 0111010 (25 mm) | |||
| 0111012 (32 mm) | |||
| 0111014 (40 mm) | |||
| 0111016 (50 mm) | |||
| 0111018 (63 mm) | |||
| 0111020 (75 mm) | |||
| 0111022 (90 mm) | |||
| 0111024 (110 mm) | |||
| 0111026 (125 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Reducer |
CSA B137.11 |
| 0111109 (20/16 mm) | |||
| 0111110 (25/16 mm) | |||
| 0111112 (25/20 mm) | |||
| 0111114 (32/20 mm) | |||
| 0111116 (32/25 mm) | |||
| 0111118 (40/20 mm) | |||
| 0111120 (40/25 mm) | |||
| 0111122 (40/32 mm) | |||
| 0111124 (50/20 mm) | |||
| 0111126 (50/25 mm) | |||
| 0111128 (50/32 mm) | |||
| 0111130 (50/40 mm) | |||
| 0111131 (63/20 mm) | |||
| 0111132 (63/25 mm) | |||
| 0111134 (63/32 mm) | |||
| 0111136 (63/40 mm) | |||
| 0111138 (63/50 mm) | |||
| 0111139 (75/40 mm) | |||
| 0111140 (75/50 mm) | |||
| 0111142 (75/63 mm) | |||
| 0111143 (75/20 mm) | |||
| 0111144 (75/25 mm) | |||
| 0111145 (75/32 mm) | |||
| 0111151 (90/50 mm) | |||
| 0111152 (90/63 mm) | |||
| 0111153 (90/75 mm) | |||
| 0111155 (110/63 mm) | |||
| 0111157 (110/75 mm) | |||
| 0111159 (110/90 mm) | |||
| 0111161 (125/75 mm) | |||
| 0111163 (125/90 mm) | |||
| 0111165 (125/110 mm) | |||
| 0111176 (160/125 mm) SDR 7.4 | |||
| 0111174 (160/110 mm) SDR 7.4 | |||
| 0111175 (160/110 mm) SDR 11 | |||
| 0111177 (160/125 mm) SDR 11 | |||
| 0111184 (200/160 mm) SDR 7.4 | |||
| 0111185 (200/160 mm) SDR 11 | |||
| 0111190 (250/200 mm) SDR 7.4 | |||
| 0111191 (250/200 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Reducing Socket |
CSA B137.11 |
| 0111238 (63/50 mm) | |||
| 0111242 (75/63 mm) | |||
| 0111253 (90/75 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Elbow 45° |
CSA B137.11 |
| 0112506 (16 mm) | |||
| 0112508 (20 mm) | |||
| 0112510 (25 mm) | |||
| 0112512 (32 mm) | |||
| 0112514 (40 mm) | |||
| 0112516 (50 mm) | |||
| 0112518 (63 mm) | |||
| 0112520 (75 mm) | |||
| 0112522 (90 mm) | |||
| 0112524 (110 mm) | |||
| 0112526 (125 mm) | |||
| 0112530 (160 mm) SDR 7.4 | |||
| 0112531 (160 mm) SDR 11 | |||
| 0112534 (200 mm) SDR 7.4 | |||
| 0112535 (200 mm) SDR 11 | |||
| 0112538 (250 mm) SDR 7.4 | |||
| 0112539 (250 mm) SDR 11 | |||
| 0112708 (20 mm Internal/External) | |||
| 0112710 (25 mm Internal/External) | |||
| 0112712 (32 mm Internal/External) | |||
| 0112714 (40 mm Internal/External) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Elbow 90° |
CSA B137.11 |
| 0112106 (16 mm) | |||
| 0112108 (20 mm) | |||
| 0112110 (25 mm) | |||
| 0112112 (32 mm) | |||
| 0112114 (40 mm) | |||
| 0112116 (50 mm) | |||
| 0112118 (63 mm) | |||
| 0112120 (75 mm) | |||
| 0112122 (90 mm) | |||
| 0112124 (110 mm) | |||
| 0112126 (125 mm) | |||
| 0112130 (160 mm) SDR 7.4 | |||
| 0112131 (160 mm) SDR 11 | |||
| 0112134 (200 mm) SDR 7.4 | |||
| 0112135 (200 mm) SDR 11 | |||
| 0112138 (250 mm) SDR 7.4 | |||
| 0112139 (250 mm) SDR 11 | |||
| 0112306 (16 mm Internal/External) | |||
| 0112308 (20 mm Internal/External) | |||
| 0112310 (25 mm Internal/External) | |||
| 0112312 (32 mm Internal/External) | |||
| 0112314 (40 mm Internal/External) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Tee |
CSA B137.11 |
| 0113106 (16 mm) | |||
| 0113108 (20 mm) | |||
| 0113110 (25 mm) | |||
| 0113112 (32 mm) | |||
| 0113114 (40 mm) | |||
| 0113116 (50 mm) | |||
| 0113118 (63 mm) | |||
| 0113120 (75 mm) | |||
| 0113122 (90 mm) | |||
| 0113124 (110 mm) | |||
| 0113126 (125 mm) | |||
| 0113130 (160 mm) SDR 7.4 | |||
| 0113131 (160 mm) SDR 11 | |||
| 0113134 (200 mm) SDR 7.4 | |||
| 0113135 (200 mm) SDR 11 | |||
| 0113138 (250 mm) SDR 7.4 | |||
| 0113139 (250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Reducing Tee |
CSA B137.11 |
| 0113506 (20 mm x 16 mm x 16 mm) | |||
| 0113508 (20 mm x 16 mm x 20 mm) | |||
| 0113510 (20 mm x 20 mm x 16 mm) | |||
| 0113511 (20 mm x 25 mm x 20 mm) | |||
| 0113512 (25 mm x 16 mm x 16 mm) | |||
| 0113514 (25 mm x 16 mm x 20 mm) | |||
| 0113516 (25 mm x 16 mm x 25 mm) | |||
| 0113518 (25 mm x 20 mm x 16 mm) | |||
| 0113520 (25 mm x 20 mm x 20 mm) | |||
| 0113522 (25 mm x 20 mm x 25 mm) | |||
| 0113528 (32 mm x 16 mm x 32 mm) | |||
| 0113532 (32 mm x 20 mm x 20 mm) | |||
| 0113534 (32 mm x 20 mm x 32 mm) | |||
| 0113538 (32 mm x 25 mm x 25 mm) | |||
| 0113540 (32 mm x 25 mm x 32 mm) | |||
| 0113542 (40 mm x 20 mm x 40 mm) | |||
| 0113544 (40 mm x 25 mm x 40 mm) | |||
| 0113546 (40 mm x 32 mm x 40 mm) | |||
| 0113547 (50 mm x 20 mm x 50 mm) | |||
| 0113548 (50 mm x 25 mm x 50 mm) | |||
| 0113550 (50 mm x 32 mm x 50 mm) | |||
| 0113551 (50 mm x 40 mm x 50 mm) | |||
| 0113552 (63 mm x 20 mm x 63 mm) | |||
| 0113554 (63 mm x 25 mm x 63 mm) | |||
| 0113556 (63 mm x 32 mm x 63 mm) | |||
| 0113558 (63 mm x 40 mm x 63 mm) | |||
| 0113560 (63 mm x 50 mm x 63 mm) | |||
| 0113561 (75 mm x 20 mm x 75 mm) | |||
| 0113562 (75 mm x 25 mm x 75 mm) | |||
| 0113564 (75 mm x 32 mm x 75 mm) | |||
| 0113566 (75 mm x 40 mm x 75 mm) | |||
| 0113568 (75 mm x 50 mm x 75 mm) | |||
| 0113570 (75 mm x 63 mm x 75 mm) | |||
| 0113576 (90 mm x 32 mm x 90 mm) | |||
| 0113578 (90 mm x 40 mm x 90 mm) | |||
| 0113580 (90 mm x 50 mm x 90 mm) | |||
| 0113582 (90 mm x 63 mm x 90 mm) | |||
| 0113584 (90 mm x 75 mm x 90 mm) | |||
| 0113586 (110 mm x 63 mm x 110 mm) | |||
| 0113588 (110 mm x 75 mm x 110 mm) | |||
| 0113590 (110 mm x 90 mm x 110 mm) | |||
| 0113592 (125 mm x 75 mm x 125 mm) | |||
| 0113594 (125 mm x 90 mm x 125 mm) | |||
| 0113596 (125 mm x 110 mm x 125 mm) | |||
| 0113600 (160 mm x 75 mm x 160 mm) SDR 7.4 | |||
| 0113601 (160 mm x 75 mm x 160 mm) SDR 11 | |||
| 0113602 (160 mm x 90 mm x 160 mm) SDR 7.4 | |||
| 0113603 (160 mm x 90 mm x 160 mm) SDR 11 | |||
| 0113608 (200 mm x 75 mm x 200 mm) SDR 7.4 | |||
| 0113609 (200 mm x 75 mm x 200 mm) SDR 11 | |||
| 0113610 (200 mm x 90 mm x 200 mm) SDR 7.4 | |||
| 0113611 (200 mm x 90 mm x 200 mm) SDR 11 | |||
| 0113612 (200 mm x 110 mm x 200 mm) SDR 7.4 | |||
| 0113613 (200 mm x 110 mm x 200 mm) SDR 11 | |||
| 0113614 (200 mm x 125 mm x 200 mm) SDR 7.4 | |||
| 0113615 (200 mm x 125 mm x 200 mm) SDR 11 | |||
| 0113624 (250 mm x 75 mm x 250 mm) SDR 7.4 | |||
| 0113625 (250 mm x 75 mm x 250 mm) SDR 11 | |||
| 0113626 (250 mm x 90 mm x 250 mm) SDR 7.4 | |||
| 0113627 (250 mm x 90 mm x 250 mm) SDR 11 | |||
| 0113628 (250 mm x 110 mm x 250 mm) SDR 7.4 | |||
| 0113629 (250 mm x 110 mm x 250 mm) SDR 11 | |||
| 0113630 (250 mm x 125 mm x 250 mm) SDR 7.4 | |||
| 0113631 (250 mm x 125 mm x 250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Cross |
CSA B137.11 |
| 0113708 (20 mm) | |||
| 0113710 (25 mm) | |||
| 0113712 (32 mm) | |||
| 0113714 (40 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® End Cap |
CSA B137.11 |
| 0114106 (16 mm) | |||
| 0114108 (20 mm) | |||
| 0114110 (25 mm) | |||
| 0114112 (32 mm) | |||
| 0114114 (40 mm) | |||
| 0114116 (50 mm) | |||
| 0114118 (63 mm) | |||
| 0114120 (75 mm) | |||
| 0114122 (90 mm) | |||
| 0114124 (110 mm) | |||
| 0114126 (125 mm) | |||
| 0114130 (160 mm) SDR 7.4 | |||
| 0114131 (160 mm) SDR 11 | |||
| 0114134 (200 mm) SDR 7.4 | |||
| 0114135 (200 mm) SDR 11 | |||
| 0114138 (250 mm) SDR 7.4 | |||
| 0114139 (250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Fusion Outlet (Saddle) |
CSA B137.11 |
| 0115156 (40/20 mm) | |||
| 0115158 (40/25 mm) | |||
| 0115160 (50/20 mm) | |||
| 0115162 (50/25 mm) | |||
| 0115164 (63/20 mm) | |||
| 0115166 (63/25 mm) | |||
| 0115168 (63/32 mm) | |||
| 0115170 (75/20 mm) | |||
| 0115172 (75/25 mm) | |||
| 0115174 (75/32 mm) | |||
| 0115175 (75/40 mm) | |||
| 0115176 (90/20 mm) | |||
| 0115178 (90/25 mm) | |||
| 0115180 (90/32 mm) | |||
| 0115181 (90/40 mm) | |||
| 0115182 (110/20 mm) | |||
| 0115184 (110/25 mm) | |||
| 0115186 (110/32 mm) | |||
| 0115188 (110/40 mm) | |||
| 0115189 (110/50 mm) | |||
| 0115190 (125/20 mm) | |||
| 0115192 (125/25 mm) | |||
| 0115194 (125/32 mm) | |||
| 0115196 (125/40 mm) | |||
| 0115197 (125/50 mm) | |||
| 0115198 (125/63 mm) | |||
| 0115206 (160/20 mm) | |||
| 0115208 (160/25 mm) | |||
| 0115210 (160/32 mm) | |||
| 0115212 (160/40 mm) | |||
| 0115214 (160/50 mm) | |||
| 0115216 (160/63 mm) | |||
| 0115228 (200 - 250/20 mm) | |||
| 0115229 (200 - 250/25 mm) | |||
| 0115230 (200 - 250/32 mm) | |||
| 0115231 (200/40 mm) | |||
| 0115232 (200/50 mm) | |||
| 0115233 (200/63 mm) | |||
| 0115251 (250/40 mm) | |||
| 0115252 (250/50 mm) | |||
| 0115253 (250/63 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Flange Adapter |
CSA B137.11 |
| 0115512 (32 mm) | |||
| 0115514 (40 mm) | |||
| 0115516 (50 mm) | |||
| 0115518 (63 mm) | |||
| 0115520 (75 mm) | |||
| 0115522 (90 mm) | |||
| 0115524 (110 mm) | |||
| 0115526 (125 mm - Only with Fitting) | |||
| 0115527 (125 mm) | |||
| 0115530 (160 mm) SDR 7.4 | |||
| 0115531 (160 mm) SDR 11 | |||
| 0115534 (200 mm) SDR 7.4 | |||
| 0115535 (200 mm) SDR 11 | |||
| 0115538 (250 mm) SDR 7.4 | |||
| 0115539 (250 mm) SDR 11 | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Flange |
CSA B137.11 |
| 0115712 (32 mm) | |||
| 0115714 (40 mm) | |||
| 0115716 (50 mm) | |||
| 0115718 (63 mm) | |||
| 0115720 (75 mm) | |||
| 0115722 (90 mm) | |||
| 0115724 (110 mm) | |||
| 0115726 (125 mm) | |||
| 0115730 (160 mm) | |||
| 0115734 (200 mm) | |||
| 0115738 (250 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Overbridgebow |
CSA B137.11 |
| 0116106 (16 mm) | |||
| 0116108 (20 mm) | |||
| 0116110 (25 mm) | |||
| 0116112 (32 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Electrofusion |
CSA B137.11 |
| 0117208 (Socket - 20 mm) | |||
| 0117210 (Socket - 25 mm) | |||
| 0117212 (Socket - 32 mm) | |||
| 0117214 (Socket - 40 mm) | |||
| 0117216 (Socket - 50 mm) | |||
| 0117218 (Socket - 63 mm) | |||
| 0117220 (Socket - 75 mm) | |||
| 0117222 (Socket - 90 mm) | |||
| 0117224 (Socket - 110 mm) | |||
| 0117226 (Socket - 125 mm) | |||
| 0117230 (Socket - 160 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Back Plate Elbow |
CSA B137.11 |
| 0120106 (16 mm x 1/2" F) | |||
| 0120108 (20 mm x 1/2" F) | |||
| 0120110 (20 mm x 3/4" F) | |||
| 0120112 (25 mm x 3/4" F) | |||
| 0120113 (25 mm x 1/2" F) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Cavity Wall |
CSA B137.11 |
| 0120114 (Fitting - 1/2") | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Insulation |
CSA B137.11 |
| 0120120 (Cleading for Wall Disk 1/2") | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Cavity Wall Disk |
CSA B137.11 |
| 0120156 (16 mm x 1/2" F) | |||
| 0120158 (20 mm x 1/2" F) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Transition Elbow |
CSA B137.11 |
| 0120206 (16 mm x 1/2" F x 3/4" M) | |||
| 0120208 (20 mm x 1/2" F x 3/4" M) | |||
| 0120209 (25 mm x 1/2" F x 3/4" M) | |||
| 0120210 (20 mm x 1/2" F x 3/4" M - 30 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Adapter |
CSA B137.11 |
| 0120204 (20 mm x 1/2" F x 3/4" M) | |||
| 0121006 (Round - 16 mm x 1/2" F) | |||
| 0121008 (Round - 20 mm x 1/2" F) | |||
| 0121010 (Round - 20 mm x 3/4" F) | |||
| 0121011 (Round - 25 mm x 1/2" F) | |||
| 0121012 (Round - 25 mm x 3/4" F) | |||
| 0121013 (Round - 32 mm x 3/4" F) | |||
| 0121106 (Hexagon - 16 mm x 1/2" F) | |||
| 0121108 (Hexagon - 20 mm x 1/2" F) | |||
| 0121110 (Hexagon - 20 mm x 3/4" F) | |||
| 0121111 (Hexagon - 25 mm x 1/2" F) | |||
| 0121112 (Hexagon - 25 mm x 3/4" F) | |||
| 0121113 (Hexagon - 32 mm x 3/4" F) | |||
| 0121114 (Hexagon - 32 mm x 1" F) | |||
| 0121115 (Hexagon - 40 mm x 1" F) | |||
| 0121116 (Hexagon - 40 mm x 1 1/4" F) | |||
| 0121117 (Hexagon - 50 mm x 1 1/4" F) | |||
| 0121118 (Hexagon - 50 mm x 1 1/2" F) | |||
| 0121119 (Hexagon - 63 mm x 1 1/2" F) | |||
| 0121120 (Hexagon - 63 mm x 2" F) | |||
| 0121122 (Hexagon - 75 mm x 2" F) | |||
| 0121206 (Round - 16 mm x 1/2" M) | |||
| 0121208 (Round - 20 mm x 1/2" M) | |||
| 0121210 (Round - 20 mm x 3/4" M) | |||
| 0121211 (Round - 25 mm x 1/2" M) | |||
| 0121212 (Round - 25 mm x 3/4" M) | |||
| 0121213 (Round - 32 mm x 3/4" M) | |||
| 0121306 (Hexagon - 16 mm x 1/2" M) | |||
| 0121308 (Hexagon - 20 mm x 1/2" M) | |||
| 0121310 (Hexagon - 20 mm x 3/4" M) | |||
| 0121312 (Hexagon - 25 mm x 3/4" M) | |||
| 0121314 (Hexagon - 32 mm x 1" M) | |||
| 0121316 (Hexagon - 32 mm x 1 1/4" M) | |||
| 0121317 (Hexagon - 40 mm x 1" M) | |||
| 0121318 (Hexagon - 40 mm x 1 1/4" M) | |||
| 0121319 (Hexagon - 50 mm x 1 1/4" M) | |||
| 0121320 (Hexagon - 50 mm x 1 1/2" M) | |||
| 0121321 (Hexagon - 63 mm x 1 1/2" M) | |||
| 0121322 (Hexagon - 63 mm x 2" M) | |||
| 0121323 (Hexagon - 75 mm x 2" M) | |||
| 0121324 (Hexagon - 75 mm x 2 1/2" M) | |||
| 0121325 (Hexagon - 90 mm x 3" M) | |||
| 0121327 (Hexagon - 110 mm x 4" M) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Adapter - Round |
CSA B137.11 |
| 0121258 (Self Sealing - 20 mm x 1/2" M) | |||
| 0121261 (Self Sealing - 25 mm x 1/2" M) | |||
| 0121262 (Self Sealing - 25 mm x 3/4" M) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Adapter - Hex |
CSA B137.11 |
| 0121355 (Self Sealing - 20 mm x 1/2" M) | |||
| 0121356 (Self Sealing - 16 mm x 1/2" M) | |||
| 0121358 (Self Sealing - 20 mm x 1/2" M) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Transition Elbow |
CSA B137.11 |
| 0123006 (16 mm x 1/2" F) | |||
| 0123008 (20 mm x 3/4" F) | |||
| 0123010 (20 mm x 1/2" F) | |||
| 0123012 (25 mm x 3/4" F) | |||
| 0123014 (25 mm x 1/2" F) | |||
| 0123016 (32 mm x 3/4" F) | |||
| 0123018 (32 mm x 1" F) | |||
| 0123208 (20 mm External x 1/2" F) | |||
| 0123504 (16 mm x 1/2" M) | |||
| 0123506 (20 mm x 1/2" M) | |||
| 0123508 (20 mm x 3/4" M) | |||
| 0123510 (25 mm x 3/4" M) | |||
| 0123512 (32 mm x 3/4" M) | |||
| 0123514 (32 mm x 1" M) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Transition Tee |
CSA B137.11 |
| 0125004 (16 x 1/2" F x 16 mm) | |||
| 0125006 (20 x 1/2" F x 20 mm) | |||
| 0125008 (20 x 3/4" F x 20 mm) | |||
| 0125010 (25 x 1/2" F x 25 mm) | |||
| 0125012 (25 x 3/4" F x 25 mm) | |||
| 0125014 (32 x 3/4" F x 32 mm) | |||
| 0125016 (32 x 1" F x 32 mm) | |||
| 0125022 (50 x 1" F x 50 mm) | |||
| 0125506 (20 x 1/2" M x 20 mm) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Adapter |
CSA B137.11 |
| 0126608 (20 mm x 1/2" M) | |||
| 0126610 (25 mm x 3/4" M) | |||
| 0126612 (32 mm x 1" M) | |||
| 0126614 (40 mm x 1 1/4" M) | |||
| 0126616 (50 mm x 1 1/2" M) | |||
| 0126618 (63 mm x 2" M) | |||
| 0126638 (20 mm x 1/2" F) | |||
| 0126640 (25 mm x 3/4" F) | |||
| 0126642 (32 mm x 1" F) | |||
| 0126644 (40 mm x 1 1/4" F) | |||
| 0126646 (50 mm x 1 1/2" F) | |||
| 0126648 (63 mm x 2" F) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Connecting Union |
CSA B137.11 |
| 0126708 (L - 100 mm - 20 mm x Nut G 1") | |||
| 0126710 (L - 100 mm - 25 mm x Nut G 1 1/4") | |||
| 0126712 (L - 100 mm - 32 mm x Nut G 1 1/2") | |||
| 0126714 (L - 100 mm - 40 mm x Nut G 2") | |||
| 0126716 (L - 100 mm - 50 mm x Nut G 2 1/4") | |||
| 0126718 (L - 100 mm - 63 mm x Nut G 2 3/4") | |||
| 0126720 (L - 100 mm - 75 mm x Nut G 3 1/2") | |||
| 0126722 (L - 100 mm - 90 mm x Nut G 4") | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Water Meter Union |
CSA B137.11 |
| 0126808 (20 mm x Nut G 3/4") | |||
| 0126810 (25 mm x Nut G 3/4") | |||
| 0126812 (32 mm x Nut G 3/4") | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Transition Joint |
CSA B137.11 |
| 0127010 (ISO - 20 mm x Nut G 1") | |||
| 0127011 (ISO - 25 mm x Nut G 1") | |||
| 0127012 (ISO - 25 mm x Nut G 1 1/4") | |||
| 0127013 (ISO - 32 mm x Nut G 1 1/4") | |||
| 0127014 (ISO - 32 mm x Nut G 1 1/2") | |||
| 0127015 (ISO - 40 mm x Nut G 1 1/2") | |||
| 0127016 (ISO - 40 mm x Nut G 2") | |||
| 0127017 (ISO - 50 mm x Nut G 2") | |||
| 0127018 (ISO - 50 mm x Nut G 2 1/4") | |||
| 0127019 (ISO - 63 mm x Nut G 2 1/4") | |||
| 0127020 (ISO - 63 mm x Nut G 2 3/4") | |||
| 0127021 (ISO - 75 mm x Nut G 2 3/4") | |||
| 0127022 (ISO - 75 mm x Nut G 3 1/2") | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Counterpart for |
CSA B137.11 |
| 0127310 (ISO Joint - 20 mm x 1" M) | |||
| 0127311 (ISO Joint - 25 mm x 1" M) | |||
| 0127312 (ISO Joint - 25 mm x 1 1/4" M) | |||
| 0127313 (ISO Joint - 32 mm x 1 1/4" M) | |||
| 0127314 (ISO Joint - 32 mm x 1 1/2" M) | |||
| 0127315 (ISO Joint - 40 mm x 1 1/2" M) | |||
| 0127316 (ISO Joint - 40 mm x 2" M) | |||
| 0127317 (ISO Joint - 50 mm x 2" M) | |||
| 0127318 (ISO Joint - 50 mm x 2 1/4" M) | |||
| 0127319 (ISO Joint - 63 mm x 2 1/4" M) | |||
| 0127320 (ISO Joint - 63 mm x 2 3/4" M) | |||
| 0127321 (ISO Joint - 75 mm x 2 3/4" M) | |||
| 0127322 (ISO Joint - 75 mm x 3 1/2" M) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Fusion Outlet (Saddle) |
CSA B137.11 |
| 0128214 (Hexagon - 40/25 mm x 1/2" F) | |||
| 0128216 (Hexagon - 50/25 mm x 1/2" F) | |||
| 0128218 (Hexagon - 63/25 mm x 1/2" F) | |||
| 0128220 (Hexagon - 75/25 mm x 1/2" F) | |||
| 0128222 (Hexagon - 90/25 mm x 1/2" F) | |||
| 0128224 (Hexagon - 110/25 mm x 1/2" F) | |||
| 0128226 (Hexagon - 125/25 mm x 1/2" F) | |||
| 0128230 (Hexagon - 160/25 mm x 1/2" F) | |||
| 0128232 (Hexagon - 200 - 250/25 mm x 1/2" F) | |||
| 0128234 (Hexagon - 40/25 mm x 3/4" F) | |||
| 0128236 (Hexagon - 50/25 mm x 3/4" F) | |||
| 0128238 (Hexagon - 63/25 mm x 3/4" F) | |||
| 0128240 (Hexagon - 75/25 mm x 3/4" F) | |||
| 0128242 (Hexagon - 90/25 mm x 3/4" F) | |||
| 0128244 (Hexagon - 110/25 mm x 3/4" F) | |||
| 0128246 (Hexagon - 125/25 mm x 3/4" F) | |||
| 0128250 (Hexagon - 160/25 mm x 3/4" F) | |||
| 0128254 (Hexagon - 200 - 250/25 mm x 3/4" F) | |||
| 0128260 (Hexagon - 75/32 mm x 1" F) | |||
| 0128262 (Hexagon - 90/32 mm x 1" F) | |||
| 0128264 (Hexagon - 110/32 mm x 1" F) | |||
| 0128266 (Hexagon - 125/32 mm x 1" F) | |||
| 0128270 (Hexagon - 160/32 mm x 1" F) | |||
| 0128274 (Hexagon - 200 - 250/32 mm x 1" F) | |||
| 0128314 (40/25 mm x 1/2" M) | |||
| 0128316 (50/25 mm x 1/2" M) | |||
| 0128318 (63/25 mm x 1/2" M) | |||
| 0128320 (75/25 mm x 1/2" M) | |||
| 0128322 (90/25 mm x 1/2" M) | |||
| 0128324 (110/25 mm x 1/2" M) | |||
| 0128326 (125/25 mm x 1/2" M) | |||
| 0128330 (160/25 mm x 1/2" M) | |||
| 0128334 (40/25 mm x 3/4" M) | |||
| 0128336 (50/25 mm x 3/4" M) | |||
| 0128338 (63/25 mm x 3/4" M) | |||
| 0128340 (75/25 mm x 3/4" M) | |||
| 0128342 (90/25 mm x 3/4" M) | |||
| 0128344 (110/25 mm x 3/4" M) | |||
| 0128346 (125/25 mm x 3/4" M) | |||
| 0128350 (160/25 mm x 3/4" M) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® Distribut. Block |
CSA B137.11 |
| 0130115 (Sanitary - 20/25 mm) | |||
| 0130130 (with Insulation & Art. 30115) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ¢ +++ [G] |
PP |
Aquatherm greenpipe® 4-Port Manifold |
CSA B137.11 |
| 0130602 (32 mm x 16 mm) | |||
| 0130604 (32 mm x 20 mm) | |||
| 0130804 (End Piece - 32 mm x 1/2" F) | |||
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Back Plate Elbow |
ASTM F2389 |
| 920108 (20 mm x 1/2" F SS) | |||
| 920110 (20 mm x 3/4" F SS) | |||
| 920112 (25 mm x 3/4" F SS) | |||
| 920113 (25 mm x 1/2" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Back Plate Elbow |
CSA B137.11 |
| 920108 (20 mm x 1/2" F SS) | |||
| 920110 (20 mm x 3/4" F SS) | |||
| 920112 (25 mm x 3/4" F SS) | |||
| 920113 (25 mm x 1/2" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Back Plate Elbow Dry Construction |
ASTM F2389 |
| 920158 (20 mm x 1/2" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Back Plate Elbow Dry Construction |
CSA B137.11 |
| 920158 (20 mm x 1/2" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Transition Pc w/Female Thrd Round |
ASTM F2389 |
| 921008 (20 mm x 1/2" F SS) | |||
| 921010 (20 mm x 3/4" F SS) | |||
| 921011 (25 mm x 1/2" F SS) | |||
| 921012 (25 mm x 3/4" F SS) | |||
| 921013 (32 mm x 3/4" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Transition Pc w/Female Thrd Round |
CSA B137.11 |
| 921008 (20 mm x 1/2" F SS) | |||
| 921010 (20 mm x 3/4" F SS) | |||
| 921011 (25 mm x 1/2" F SS) | |||
| 921012 (25 mm x 3/4" F SS) | |||
| 921013 (32 mm x 3/4" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Transition Pc w/Female Thread-Hex |
ASTM F2389 |
| 1121114 (32 mm x 1" F SS) | |||
| 1121115 (40 mm x 1" F SS) | |||
| 1121116 (40 mm x 1 1/4" F SS) | |||
| 1121117 (50 mm x 1 1/4" F SS) | |||
| 1121118 (50 mm x 1 1/2" F SS) | |||
| 1121119 (63 mm x 1 1/2" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Transition Pc w/Female Thread-Hex |
CSA B137.11 |
| 1121114 (32 mm x 1" F SS) | |||
| 1121115 (40 mm x 1" F SS) | |||
| 1121116 (40 mm x 1 1/4" F SS) | |||
| 1121117 (50 mm x 1 1/4" F SS) | |||
| 1121118 (50 mm x 1 1/2" F SS) | |||
| 1121119 (63 mm x 1 1/2" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Transition Piece |
ASTM F2389 |
| 921208 (20 mm x 1/2" M SS) | |||
| 921210 (20 mm x 3/4" M SS) | |||
| 921211 (25 mm x 1/2" M SS) | |||
| 921212 (25 mm x 3/4" M SS) | |||
| 921213 (32 mm x 3/4" M SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Transition Piece |
CSA B137.11 |
| 921208 (20 mm x 1/2" M SS) | |||
| 921210 (20 mm x 3/4" M SS) | |||
| 921211 (25 mm x 1/2" M SS) | |||
| 921212 (25 mm x 3/4" M SS) | |||
| 921213 (32 mm x 3/4" M SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Transition Pc w/Female Thread-ISO |
ASTM F2389 |
| 923008 (20 mm x 3/4" F SS) | |||
| 923010 (20 mm x 1/2" F SS) | |||
| 923012 (25 mm x 3/4" F SS) | |||
| 923014 (25 mm x 1/2" F SS) | |||
| 923016 (32 mm x 3/4" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Transition Pc w/Female Thread-ISO |
CSA B137.11 |
| 923008 (20 mm x 3/4" F SS) | |||
| 923010 (20 mm x 1/2" F SS) | |||
| 923012 (25 mm x 3/4" F SS) | |||
| 923014 (25 mm x 1/2" F SS) | |||
| 923016 (32 mm x 3/4" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Trans Elbow w/Female Thread-NPT |
ASTM F2389 |
| 1123018 (32 mm x 1" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Trans Elbow w/Female Thread-NPT |
CSA B137.11 |
| 1123018 (32 mm x 1" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Transition Elbow with Male Thread |
ASTM F2389 |
| 923506 (20 mm x 1/2" M SS) | |||
| 923508 (20 mm x 3/4" M SS) | |||
| 923510 (25 mm x 3/4" M SS) | |||
| 923512 (32 mm x 3/4" M SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Transition Elbow with Male Thread |
CSA B137.11 |
| 923506 (20 mm x 1/2" M SS) | |||
| 923508 (20 mm x 3/4" M SS) | |||
| 923510 (25 mm x 3/4" M SS) | |||
| 923512 (32 mm x 3/4" M SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Threaded Branch Tee - ISO |
ASTM F2389 |
| 925006 (20 mm x 1/2" F x 20 mm SS) | |||
| 925008 (20 mm x 3/4" F x 210 mm SS) | |||
| 925010 (25 mm x 1/2" F x 25 mm SS) | |||
| 925012 (25 mm x 3/4" x 25 mm SS) | |||
| 925013 (32 mm x 1/2" F x 32 mm SS) | |||
| 925014 (32 mm x 3/4" F x 32 mm SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Threaded Branch Tee - ISO |
CSA B137.11 |
| 925006 (20 mm x 1/2" F x 20 mm SS) | |||
| 925008 (20 mm x 3/4" F x 210 mm SS) | |||
| 925010 (25 mm x 1/2" F x 25 mm SS) | |||
| 925012 (25 mm x 3/4" x 25 mm SS) | |||
| 925013 (32 mm x 1/2" F x 32 mm SS) | |||
| 925014 (32 mm x 3/4" F x 32 mm SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Threaded Branch Tee - NPT |
ASTM F2389 |
| 1125016 (32 mm x 1" F x 32 mm SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Threaded Branch Tee - NPT |
CSA B137.11 |
| 1125016 (32 mm x 1" F x 32 mm SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm®Weld-In Saddle w/Female Thread-ISO |
ASTM F2389 |
| 928214 (40/25 mm x 1/2" F SS) | |||
| 928216 (50/25 mm x 1/2" F SS) | |||
| 928218 (63/25 mm x 1/2" F SS) | |||
| 928220 (75/25 mm x 1/2" F SS) | |||
| 928222 (90/25 mm x 1/2" F SS) | |||
| 928224 (110/25 mm x 1/2" F SS) | |||
| 928226 (125/25 mm x 1/2" F SS) | |||
| 928230 (160/25 mm x 1/2" F SS) | |||
| 928232 (200 - 250/25 mm x 1/2" F SS) | |||
| 928234 (40/25 mm x 3/4" F SS) | |||
| 928236 (50/25 mm x 3/4" F SS) | |||
| 928238 (63/25 mm x 3/4" F SS) | |||
| 928240 (75/25 mm x 3/4" F SS) | |||
| 928242 (90/25 mm x 3/4" F SS) | |||
| 928244 (110/25 mm x 3/4" F SS) | |||
| 928246 (125/25 mm x 3/4" F SS) | |||
| 928250 (160/25 mm x 3/4" F SS) | |||
| 928254 (200 - 250/25 mm x 3/4" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm®Weld-In Saddle w/Female Thread-ISO |
CSA B137.11 |
| 928214 (40/25 mm x 1/2" F SS) | |||
| 928216 (50/25 mm x 1/2" F SS) | |||
| 928218 (63/25 mm x 1/2" F SS) | |||
| 928220 (75/25 mm x 1/2" F SS) | |||
| 928222 (90/25 mm x 1/2" F SS) | |||
| 928224 (110/25 mm x 1/2" F SS) | |||
| 928226 (125/25 mm x 1/2" F SS) | |||
| 928230 (160/25 mm x 1/2" F SS) | |||
| 928232 (200 - 250/25 mm x 1/2" F SS) | |||
| 928234 (40/25 mm x 3/4" F SS) | |||
| 928236 (50/25 mm x 3/4" F SS) | |||
| 928238 (63/25 mm x 3/4" F SS) | |||
| 928240 (75/25 mm x 3/4" F SS) | |||
| 928242 (90/25 mm x 3/4" F SS) | |||
| 928244 (110/25 mm x 3/4" F SS) | |||
| 928246 (125/25 mm x 3/4" F SS) | |||
| 928250 (160/25 mm x 3/4" F SS) | |||
| 928254 (200 - 250/25 mm x 3/4" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
PP |
Fusiotherm® Weld-In Saddle w/ Female Thread |
ASTM F2389 |
| 1128260 (75/32 mm x 1" F SS) | |||
| 1128262 (90/32 mm x 1" F SS) | |||
| 1128264 (110/32 mm x 1" F SS) | |||
| 1128266 (125/32 mm x 1" F SS) | |||
| 1128270 (160/32 mm x 1" F SS) | |||
| 1128274 (200 - 250/32 mm x 1" F SS) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PP |
Fusiotherm® Weld-In Saddle w/ Female Thread |
CSA B137.11 |
| 1128260 (75/32 mm x 1" F SS) | |||
| 1128262 (90/32 mm x 1" F SS) | |||
| 1128264 (110/32 mm x 1" F SS) | |||
| 1128266 (125/32 mm x 1" F SS) | |||
| 1128270 (160/32 mm x 1" F SS) | |||
| 1128274 (200 - 250/32 mm x 1" F SS) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 1374
Processing time was 2 seconds