NSF Certified Products - Plumbing and Related Products

These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=03850&Standard=014&LowLead=Y&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Aquatherm GmbH
Biggen 5
D-57439 Attendorn
Germany
49 27 22 950 0
Visit this company's website

Facility : Attendorn, Germany

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [G]	MLTPL	Aquatherm Greenpipe® - NPT	ASTM F2389
Threaded Back plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP	0620110 (1/2" - 20mm) x 3/4" FIP	0620112 (3/4" - 25mm) x 3/4" FIP	0620113 (3/4" - 25mm) x 1/2" FIP
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	MLTPL	Aquatherm Greenpipe® - Wing Back 90 Elbow	ASTM F2389
0620158 (1/2" - 20mm) x 1/2" FIP
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	MLTPL	Aquatherm Greenpipe® Transition Piece	ASTM F2389
0621008 (1/2" - 20mm) x 1/2" FIP	0621010 (1/2" - 20mm) x 3/4" FIP	0621011 (3/4" - 25mm) x 1/2" FIP	0621012 (3/4" - 25mm) x 3/4" FIP
0621013 (1" - 32mm) x 3/4" FIP	0621108 (1/2" - 20mm) x 1/2" FIP	0621110 (1/2" - 20mm) x 3/4" FIP	0621111 (3/4" - 25mm) x 1/2" FIP
0621112 (3/4" - 25mm) x 3/4" FIP	0621113 (1" - 32mm) x 3/4" FIP	0621114 (1" - 32mm) x 1" FIP	0621115 (1 1/4" - 40mm) x 1" FIP
0621116 (1 1/4" - 40mm) x 1 1/4" FIP	0621117 (1 1/2" - 50mm) x 1 1/4" FIP	0621118 (1.5" - 50mm) x 1.5" FIP	0621119 (2" - 63mm) x 1.5" FIP
0621120 (2" - 63mm) x 2" FIP	0621122 (2.5" - 75mm) x 2" FIP	0621208 (1/2" - 20mm) x 1/2" MIP	0621210 (1/2" - 20mm) x 3/4" MIP
0621211 (3/4" - 25mm) x 1/2" MIP	0621212 (3/4" - 25mm) x 3/4" MIP	0621213 (1" - 32mm) x 3/4" MIP	0621308 (1/2" - 20mm) x 1/2" MIP
0621310 (1/2" - 20mm) x 3/4" MIP	0621312 (3/4" - 25mm) x 3/4" MIP	0621314 (1" - 32mm) x 1" MIP	0621316 (1" - 32mm) x 1.25" MIP
0621317 (1 1/4" - 40mm) x 1" MIP	0621318 (1.25" - 40mm) x 1.25" MIP	0621319 (1.5" - 50mm) x 1.25" MIP	0621320 (1.5" - 50mm) x 1.5" MIP
0621321 (2" - 63mm) x 1.5" MIP	0621322 (2" - 63mm) x 2" MIP	0621323 (2.5" - 75mm) x 2" MIP	0621324 (2.5" - 75mm) x 2.5" MIP
0621325 (3" - 90mm) x 3" MIP
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	MLTPL	Aquatherm Greenpipe® - Transition Elbow	ASTM F2389
0623008 (1/2" - 20mm) x 3/4" FIP NPT	0623010 (1/2" - 20mm) x 1/2" FIP NPT	0623012 (3/4" - 25mm) x 3/4" FIP NPT	0623014 (3/4" - 25mm) x 1/2" FIP NPT
0623016 (1" - 32mm) x 3/4" FIP NPT	0623018 (1" - 32mm) x 1" FIP NPT	0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female	0623506 (1/2" - 20mm) x 1/2" MIP NPT
0623508 (1/2" - 20mm) x 3/4" MIP NPT	0623510 (3/4" - 25mm) x 3/4" MIP NPT	0623512 (1" - 32mm) x 3/4" MIP NPT	0623514 (1" - 32mm) x 1" MIP NPT
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	MLTPL	Aquatherm Greenpipe® - Transition Tee	ASTM F2389
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP	0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP	0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP	0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP	0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP	0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP	0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	MLTPL	Aquatherm Greenpipe® - Fusion Outlet	ASTM F2389
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)	0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)	0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)	0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)	0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)	0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)	0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)	0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)	0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)	0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)	0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)	0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)	0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)	0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)	0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)	0628262 (3" / 1" - 90 / 32mm x 1" FIP)
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)	0628266 (4" x 1" - 125 / 32mm x 1" FIP)	0628270 (6" / 1" - 160 / 32mm x 1" FIP)	0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)	0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)	0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)	0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)	0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)	0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)	0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)	0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)	0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)	0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)	0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)	0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)	0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ +++ [G]	MLTPL	Aquatherm Greenpipe® - NPT	CSA B137.11
Threaded Back Plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP	0620110 (1/2" - 20mm) x 3/4" FIP	0620112 (3/4" - 25mm) x 3/4" FIP	0620113 (3/4" - 25mm) x 1/2" FIP
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ +++ [G]	MLTPL	Aquatherm Greenpipe® - Wing Back 90 Elbow	CSA B137.11
0620158 (1/2" - 20mm) x 1/2" FIP
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ +++ [G]	MLTPL	Aquatherm Greenpipe® Transition Piece	CSA B137.11
0621008 (1/2" - 20mm) x 1/2" FIP	0621010 (1/2" - 20mm) x 3/4" FIP	0621011 (3/4" - 25mm) x 1/2" FIP	0621012 (3/4" - 25mm) x 3/4" FIP
0621013 (1" - 32mm) x 3/4" FIP	0621108 (1/2" - 20mm) x 1/2" FIP	0621111 (3/4" - 25mm) x 1/2" FIP	0621112 (3/4" - 25mm) x 3/4" FIP
0621113 (1" - 32mm) x 3/4" FIP	0621114 (1" - 32mm) x 1" FIP	0621115 (1 1/4" - 40mm) x 1" FIP	0621116 (1 1/4" - 40mm) x 1 1/4" FIP
0621117 (1 1/2" - 50mm) x 1 1/4" FIP	0621118 (1.5" - 50mm) x 1.5" FIP	0621119 (2" - 63mm) x 1.5" FIP	0621120 (2" - 63mm) x 2" FIP
0621122 (2.5" - 75mm) x 2" FIP	0621208 (1/2" - 20mm) x 1/2" MIP	0621210 (1/2" - 20mm) x 3/4" MIP	0621211 (3/4" - 25mm) x 1/2" MIP
0621212 (3/4" - 25mm) x 3/4" MIP	0621213 (1" - 32mm) x 3/4" MIP	0621308 (1/2" - 20mm) x 1/2" MIP	0621310 (1/2" - 20mm) x 3/4" MIP
0621312 (3/4" - 25mm) x 3/4" MIP	0621314 (1" - 32mm) x 1" MIP	0621316 (1" - 32mm) x 1.25" MIP	0621317 (1 1/4" - 40mm) x 1" MIP
0621318 (1.25" - 40mm) x 1.25" MIP	0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP	0621320 (1.5" - 50mm) x 1.5" MIP	0621321 (2" - 63mm) x 1.5" MIP
0621322 (2" - 63mm) x 2" MIP	0621323 (2.5" - 75mm) x 2" MIP	0621324 (2.5" - 75mm) x 2.5" MIP	0621325 (3" - 90mm) x 3" MIP
0621110 (1/2" - 20mm) x 3/4" FIP
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ +++ [G]	MLTPL	Aquatherm Greenpipe® - Transition Elbow	CSA B137.11
0623008 (1/2" - 20mm) x 3/4" FIP NPT	0623010 (1/2" - 20mm) x 1/2" FIP NPT	0623012 (3/4" - 25mm) x 3/4" FIP NPT	0623014 (3/4" - 25mm) x 1/2" FIP NPT
0623016 (1" - 32mm) x 3/4" FIP NPT	0623018 (1" - 32mm) x 1" FIP NPT	0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female	0623506 (1/2" - 20mm) x 1/2" MIP NPT
0623508 (1/2" - 20mm) x 3/4" MIP NPT	0623510 (3/4" - 25mm) x 3/4" MIP NPT	0623512 (1" - 32mm) x 3/4" MIP NPT	0623514 (1" - 32mm) x 1" MIP NPT
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ +++ [G]	MLTPL	Aquatherm Greenpipe® - Transition Tee	CSA B137.11
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP	0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP	0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP	0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP	0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP	0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP	0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ +++ [G]	MLTPL	Aquatherm Greenpipe® - Fusion Outlet	CSA B137.11
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)	0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)	0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)	0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)	0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)	0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)	0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)	0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)	0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)	0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)	0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)	0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)	0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)	0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)	0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)	0628262 (3" / 1" - 90 / 32mm x 1" FIP)
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)	0628266 (4" x 1" - 125 / 32mm x 1" FIP)	0628270 (6" / 1" - 160 / 32mm x 1" FIP)	0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)	0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)	0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)	0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)	0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)	0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)	0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)	0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)	0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)	0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)	0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)	0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)	0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Socket	ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Reducer	ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111176 (160/125 mm) SDR 7.4
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Reducing Socket	ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Elbow 45°	ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Elbow 90°	ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Tee	ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Reducing Tee	ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Cross	ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® End Cap	ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Fusion Outlet (Saddle)	ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings$ +++ [G]*	PP	Aquatherm greenpipe® Flange Adapter	ASTM F2389
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11
$ Flanges are Listed for use with either metric or ANSI compatible flange rings. * Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings$ +++ [G]*	PP	Aquatherm greenpipe® Flange	ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)
$ Flanges are Listed for use with either metric or ANSI compatible flange rings. * Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++*	PP	Aquatherm greenpipe® Coupling Screw	ASTM F2389
0115838 (Joint - PP - 20 mm)[G]
0115840 (Joint - PP - 25 mm)[G]
0115842 (Joint - PP - 32 mm)[G]
0115844 (Joint - PP - 40 mm)[G]
0115846 (Joint - PP - 50 mm)[G]
0115848 (Joint - PP - 63 mm)[G]
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. * Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings +++ [G]*	PP	Aquatherm greenpipe® Overbridgebow	ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Electrofusion	ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Back Plate Elbow	ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Cavity Wall	ASTM F2389
0120114 (Fitting - 1/2")
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Insulation	ASTM F2389
0120120 (Cleading for Wall Disk 1/2")
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& +++ [G]*	PP	Aquatherm greenpipe®	ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM F2023. * Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& +++ [G]*	PP	Aquatherm greenpipe®	ASTM F2389
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM F2023. * Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& +++ [G]*	PP	Aquatherm greenpipe® Faser	ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM F2023. * Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Cavity Wall Disk	ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Transition Elbow	ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Transition Piece	ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Adapter - Round	ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Adapter - Hex	ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Transition Elbow	ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Transition Tee	ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Adapter	ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Connecting Union	ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Water Meter Union	ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Adapter	ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Counterpart for	ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Fusion Outlet (Saddle)	ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Distribut. Block	ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® 4-Port Manifold	ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Globe Valve	ASTM F2389
0140808 (20 mm)
0140810 (25 mm)
0140812 (32 mm)
0140814 (40 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings +++ [G]*	PP	Aquatherm greenpipe® Concealed Valve	ASTM F2389
0140858 (Chrome Plated - 20 mm)
0140860 (Chrome Plated - 25 mm)
0140862 (Chrome Plated - 32 mm)
0140868 (Tamper-Proof - Short - 20 mm)
0140870 (Tamper-Proof - Short - 25 mm)
0140872 (Tamper-Proof - Short - 32 mm)
0140878 (Flexible Insta. Depth - 20 mm)
0140880 (Flexible Insta. Depth - 25 mm)
0140882 (Flexible Insta. Depth - 32 mm)
0140888 (Tamper-Proof - Long - 20 mm)
0140890 (Tamper-Proof - Long - 25 mm)
0140892 (Tamper-Proof - Long - 32 mm)
* Product may also carry the designation "Fusiotherm®". +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& ¢ +++ [G]*	PP	Aquatherm greenpipe® Pipe	CSA B137.11
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM F2023. * Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& ¢ +++ [G]*	PP	Aquatherm greenpipe® Pipe	CSA B137.11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM F2023. * Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& ¢ +++ [G]*	PP	Aquatherm greenpipe® Faser	CSA B137.11
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160mm) SDR 7.4
0670784 (UV - 200mm) SDR 7.4
0670788 (UV - 250mm) SDR 7.4
& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM F2023. * Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Socket	CSA B137.11
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Reducer	CSA B137.11
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111176 (160/125 mm) SDR 7.4
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Reducing Socket	CSA B137.11
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Elbow 45°	CSA B137.11
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Elbow 90°	CSA B137.11
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Tee	CSA B137.11
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Reducing Tee	CSA B137.11
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Cross	CSA B137.11
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® End Cap	CSA B137.11
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Fusion Outlet (Saddle)	CSA B137.11
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Flange Adapter	CSA B137.11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Flange	CSA B137.11
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Overbridgebow	CSA B137.11
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Electrofusion	CSA B137.11
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Back Plate Elbow	CSA B137.11
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Cavity Wall	CSA B137.11
0120114 (Fitting - 1/2")
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Insulation	CSA B137.11
0120120 (Cleading for Wall Disk 1/2")
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Cavity Wall Disk	CSA B137.11
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Transition Elbow	CSA B137.11
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Adapter	CSA B137.11
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Adapter - Round	CSA B137.11
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Adapter - Hex	CSA B137.11
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Transition Elbow	CSA B137.11
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Transition Tee	CSA B137.11
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Adapter	CSA B137.11
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Connecting Union	CSA B137.11
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Water Meter Union	CSA B137.11
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Transition Joint	CSA B137.11
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Counterpart for	CSA B137.11
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Fusion Outlet (Saddle)	CSA B137.11
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200 - 250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® Distribut. Block	CSA B137.11
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings ¢ +++ [G]*	PP	Aquatherm greenpipe® 4-Port Manifold	CSA B137.11
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)
* Product may also carry the designation "Fusiotherm®". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Back Plate Elbow	ASTM F2389
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Back Plate Elbow	CSA B137.11
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Back Plate Elbow Dry Construction	ASTM F2389
920158 (20 mm x 1/2" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Back Plate Elbow Dry Construction	CSA B137.11
920158 (20 mm x 1/2" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Transition Pc w/Female Thrd Round	ASTM F2389
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Transition Pc w/Female Thrd Round	CSA B137.11
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Transition Pc w/Female Thread-Hex	ASTM F2389
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Transition Pc w/Female Thread-Hex	CSA B137.11
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Transition Piece	ASTM F2389
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Transition Piece	CSA B137.11
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Transition Pc w/Female Thread-ISO	ASTM F2389
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Transition Pc w/Female Thread-ISO	CSA B137.11
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Trans Elbow w/Female Thread-NPT	ASTM F2389
1123018 (32 mm x 1" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Trans Elbow w/Female Thread-NPT	CSA B137.11
1123018 (32 mm x 1" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Transition Elbow with Male Thread	ASTM F2389
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Transition Elbow with Male Thread	CSA B137.11
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Threaded Branch Tee - ISO	ASTM F2389
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Threaded Branch Tee - ISO	CSA B137.11
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Threaded Branch Tee - NPT	ASTM F2389
1125016 (32 mm x 1" F x 32 mm SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Threaded Branch Tee - NPT	CSA B137.11
1125016 (32 mm x 1" F x 32 mm SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm®Weld-In Saddle w/Female Thread-ISO	ASTM F2389
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm®Weld-In Saddle w/Female Thread-ISO	CSA B137.11
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+++ [G]	PP	Fusiotherm® Weld-In Saddle w/ Female Thread	ASTM F2389
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ [G]	PP	Fusiotherm® Weld-In Saddle w/ Female Thread	CSA B137.11
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 1374
Processing time was 1 seconds

NSF Product and Service Listings