These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=06510&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Bow Industrial Corporation |  |
| 15 Vittie Street | |
| Granby, QC J2G 6N8 | |
| Canada | |
| 450-372-5481 | |
| Visit this company's website |
Facility : Granby, Quebec, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings§ +++ [G] |
CPVC 41 |
Bow |
ASTM D2846 |
|
45° Elbows |
|||
| 1/2" | 3/4" | 1" | 1 1/4" |
| 1 1/2" | 2" | ||
|
45° Street Elbows (S x Spg) |
|||
| 1/2" | 3/4" | 1" | |
|
90° Elbows |
|||
| 1/2" | 3/4" | 3/4" x 1/2" | 1" |
| 1 1/4" | 1 1/2" | 2" | |
|
90° Street Elbows (S x Spg) |
|||
| 1/2" x 1/2" | 3/4" x 3/4" | 1" | |
|
Bushings |
|||
| 3/4" x 1/2" | 1" x 3/4" | 1" x 1/2" | 1 1/4" x 1/2" |
| 1 1/4" x 3/4" | 1 1/2" x 3/4" | 1 1/4" x 1" | 1 1/2" x 1" |
| 1 1/2" x 1 1/4" | 2" x 1" | 2" x 1 1/2" | |
|
Couplings |
|||
| 1/2" | 3/4" | 3/4" x 1/2" | 1" |
| 1" x 3/4" | 1 1/4" | 1 1/2" | 2" |
|
Drop Ear Elbows |
|||
| 1/2" | 1/2" F x 1/2" F NPSM | ||
|
End Caps |
|||
| 1/2" | 3/4" | 1" | 1 1/4" |
| 1 1/2" | 2" | ||
|
Male Adapters |
|||
| 1/2" | 1/2" x 3/4" (MPT x hub) | 3/4" | 1" |
| 1 1/4" | 1 1/2" | 2" | |
|
Manifold Tee |
|||
| 1" x 1" x 1/2" | |||
|
Reducer Couplings (S x S) |
|||
| 3/4" x 1/2" | 1" x 3/4" | ||
|
Reducing Tees |
|||
| 3/4" x 1/2" x 1/2" | 3/4" x 1/2" x 3/4" | 3/4" x 3/4" x 1/2" | 1" x 1" x 3/4" |
|
Tees |
|||
| 1/2" | 1/2" x 1/2" x 3/4" | 3/4" | 3/4" x 3/4" x 1" |
| 1" | 1" x 1/2" x 1/2" | 1" x 1/2" x 3/4" | 1" x 1/2" x 1" |
| 1" x 3/4" x 1/2" | 1" x 3/4" x 3/4" | 1" x 3/4" x 1" | 1" x 1" x 1/2" |
| 1 1/4" | 1 1/4" x 1" x 1/2" | 1 1/4" x 1" x 3/4" | 1 1/4" x 1" x 1" |
| 1 1/4" x 1" x 1 1/4" | 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | 1 1/4" x 1 1/4" x 1" |
| 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" | 1 1/2" x 1" x 1" | 1 1/2" x 1 1/2" x 1/2" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 2" | 2" x 2" x 1/2" |
| 2" x 2" x 1 1/2" | 2" x 2" x 3/4" | 2" x 2" x 1" | |
|
Transition Coupling |
|||
| 3/4" IPS x 3/4" CTS | 1" IPS x 1" CTS | ||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § ++ [G] |
PPSU |
Bow |
ASTM F2159 |
|
2 Wing Elbow Barb x NPSM |
|||
| 1/2", 3/4" | |||
|
3 Wing Elbow Barb x NPSM |
|||
| 1/2", 3/4" | |||
|
90° Barb Elbow |
|||
| 1/2", 3/4", 3/4" x 1/2" | |||
|
90° Barb Elbow x MPT Elbow |
|||
| 1/2", 3/4" | |||
|
Barb Tee |
|||
| 1/2" x 1/2" x 1/2" | 1/2" x 1/2" x 3/4" | 3/4" x 1/2" x 1/2" | 3/4" x 1/2" x 3/4" |
| 3/4" x 3/4" x 1/2" | 3/4" x 3/4" x 3/4" | ||
|
Couplings |
|||
| 1/2", 3/4", 3/4" x 1/2" | |||
|
Male Adapter PEX Barb x MPT |
|||
| 1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2" | |||
|
Test Plugs |
|||
| 1/2", 3/4" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings˘ § ++ [G] |
PPSU |
Bow |
ASTM F877 |
|
2 Wing Elbow Barb x NPSM |
|||
| 1/2", 3/4" | |||
|
3 Wing Elbow Barb x NPSM |
|||
| 1/2", 3/4" | |||
|
90° Barb Elbow |
|||
| 1/2", 3/4", 3/4" x 1/2" | |||
|
90° Barb Elbow x MPT Elbow |
|||
| 1/2", 3/4" | |||
|
Barb Tee |
|||
| 1/2" x 1/2" x 1/2" | 1/2" x 1/2" x 3/4" | 3/4" x 1/2" x 1/2" | 3/4" x 1/2" x 3/4" |
| 3/4" x 3/4" x 1/2" | 3/4" x 3/4" x 3/4" | ||
|
Couplings |
|||
| 1/2", 3/4", 3/4" x 1/2" | |||
|
Male Adapter PEX Barb x MPT |
|||
| 1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2" | |||
|
Test Plugs |
|||
| 1/2", 3/4" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings˘ ++ [G] |
PPSU |
Bow |
CSA B137.5 |
|
2 Wing Elbow Barb x NPSM |
|||
| 1/2", 3/4" | |||
|
3 Wing Elbow Barb x NPSM |
|||
| 1/2", 3/4" | |||
|
90° Barb Elbow |
|||
| 1/2", 3/4", 3/4" x 1/2" | |||
|
90° Barb Elbow x MPT Elbow |
|||
| 1/2", 3/4" | |||
|
Barb Tee |
|||
| 1/2" x 1/2" x 1/2" | 1/2" x 1/2" x 3/4" | 3/4" x 1/2" x 1/2" | 3/4" x 1/2" x 3/4" |
| 3/4" x 3/4" x 1/2" | 3/4" x 3/4" x 3/4" | ||
|
Couplings |
|||
| 1/2", 3/4", 3/4" x 1/2" | |||
|
Male Adapter PEX Barb x MPT |
|||
| 1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2" | |||
|
Test Plugs |
|||
| 1/2", 3/4" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing§ +++ [G] |
CPVC 4120 |
Bow CPVC FlowGuard Gold |
ASTM D2846 |
| 1/2" - 2" | |||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing§ +++ [G] |
CPVC 4120 |
Bow Flotemp |
ASTM D2846 |
| 1/2" - 2" | |||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing˘ +++ [G] |
CPVC 4120 |
Bow CPVC FlowGuard Gold |
CSA B137.6 |
| 1/2" - 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing˘ +++ [G] |
CPVC 4120 |
Bow Flotemp |
CSA B137.6 |
| 1/2" - 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ * ^ ˘ § ++ [G] |
PEX 5006 |
Bowpex |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
# Certified Bowpex tubing is blue, red, or white. $ Tubing tested as a system using brass insert fittings manufactured by Bow Industrial Corporation. Test assemblies were prepared in accordance with installation/assembly instructions titled "BOWPEX Crosslinked Polyethylene Hot & Cold Plumbing Systems Installation Guide", dated June 1997. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing# ˘ ++ [G] |
PEX |
Bowpex |
CSA B137.5 |
| 1/4" - 2" | |||
# Certified Bowpex tubing is blue, red, or white. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing% * ^ ˘ § ++ [G] |
PEX 5006 |
Oxypex |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
% Certified Oxypex tubing has a red outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing% ˘ ++ [G] |
PEX |
Oxypex |
CSA B137.5 |
| 1/4" - 2" | |||
% Certified Oxypex tubing has a red outer layer. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing§ +++ [G] |
CPVC 4120 |
Bow Superflo CPVC |
ASTM D2846 |
| 1/2" - 2" | |||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing˘ +++ [G] |
CPVC 4120 |
Bow Superflo CPVC |
CSA B137.6 |
| 1/2" - 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing& * @ ^ § ++ [G] |
PEX 5306/5006 |
Bow Superpex |
ASTM F876/F877 |
| 1/4" - 1 1/4" | |||
& Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard and intended for a maximum 100 psi water service and a maximum working temperature of 180°F. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Certified Bow Superpex tubing has a blue, red, or white outer layer. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing& * @ ^ § ++ [G] |
PEX 5306/5006 |
Bow Superpex |
AWWA C904 |
| 1/2" - 1 1/4" | |||
& Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard and intended for a maximum 100 psi water service and a maximum working temperature of 180°F. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Certified Bow Superpex tubing has a blue, red, or white outer layer. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing@ ˘ ++ [G] |
PEX |
Bow Superpex |
CSA B137.5 |
| 1/4" - 1 1/4" | |||
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 145
Processing time was 0 seconds