These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=08490&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Tyco Fire Products | |
| 1550 Valley Center Parkway | |
| Suite 135 | |
| Bethlehem, PA 18017 | |
| United States | |
| 215-362-0700 |
Facility : # 1 USA
Joining Materials
| Product Type | General Material | For Use With | Trade Name | Product Standard |
| Primer (1,3)[G] | CPVC | PW | #100 CPVC Primer - CSC | ASTM F656 |
| Solvent Cement (1,2,3)+++ [G] | CPVC | PW | #200 CPVC Cement - CSC | ASTM F493 |
| Solvent Cement (1,3)+++ [G] | CPVC | PW | Blazemaster TFP - 500 Red, One Step Low VOC CPVC Cement | ASTM F493 |
| Solvent Cement (1,3)+++ [G] | CPVC | PW | Blazemaster-CSC300 Red | ASTM F493 |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
61 was determined based on the testing of pipe and fittings assembled using the cement
and #100 CPVC Primer-CSC.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
diameter.
Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds

