These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=08756&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| CertainTeed Corporation Pipe & Foundations Group | |
| 750 East Swedesford Road | |
| Valley Forge, PA 19482 | |
| United States | |
| 610-341-6637 | |
| Visit this company's website |
Facility : # 1 McPherson, KS
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ ** [G] |
PVC 1120 |
CertainTeed |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
CertainTeed |
ASTM D2241 |
| 1/2" - 6" SDR 13.5 | |||
| 1 1/2" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 18" SDR 26 | |||
| 1 1/4" - 18" SDR 32.5 | |||
| 3" - 12" SDR 41 | |||
| 6" - 12" SDR 51 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
CertainTeed Threaded |
ASTM D1785 |
| 1" - 2" Sch 80 | |||
| 1" - 2" Sch 120 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
Certa Lok™ C900/RJ™ |
AWWA C900 |
| 4" - 12" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ [G] |
PVC 1120 |
Certa Lok™ Yelomine™ |
ASTM D1785 |
| 2" - 6" Sch 80 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ [G] |
PVC 1120 |
Certa Lok™ Yelomine™ |
ASTM D2241 |
| 2" - 12" SDR 17 | |||
| 4" - 16" SDR 21 | |||
| 6" - 16" SDR 26 | |||
| 6" - 12" SDR 32.5 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC 1120 |
Certa-Lok™ Yelomine |
ASTM D3139 |
| 2" - 16" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
Certa Lok™ Yelomine-IB |
ASTM D2241 |
| 4" - 6" SDR 17 | |||
| 4" - 8" SDR 21 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
KWIK-SET® |
ASTM D1785 |
| 1" - 2" Sch 80 | |||
| 1" - 2" Sch 120 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing** [1] [G] |
PVC 1120 IC-0 |
Certa-Lok™ IB Well Casing |
ASTM F480 |
| 4" - 4 1/2" Sch 40 | |||
| 4 1/2" SDR 17 | |||
| 4 1/2" SDR 26 | |||
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
production facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing** [1] [G] |
PVC 1120 IC-1 |
Certa-Lok™ IB Well Casing |
ATM F480 |
| 5" - 8" SDR 17 | |||
| 5" - 6 1/4" SDR 21 | |||
| 5" SDR 26 | |||
| 6 1/4" SDR 27.6 | |||
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
production facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing** [1] [G] |
PVC 1120 IC-1 |
Certa-Lok™ Well Casing |
ASTM F480 |
| 16" Sch 40 | |||
| 10" - 16" SDR 17 | |||
| 16" SDR 21 | |||
| 16" SDR 26 | |||
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
production facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing[1] [G] |
PVC 1120 IC-0 |
Sure-Fit™ |
ASTM F480 |
| 2" - 4 1/2" Sch 40 | |||
| 4 1/2" SDR 17 | |||
| 4" SDR 21 | |||
| 2" - 4 1/2" SDR 26 | |||
| 4" SDR 32.5 | |||
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing[1] [G] |
PVC 1120 IC-1 |
Sure-Fit™ |
ASTM F480 |
| 5" - 16" Sch 40 | |||
| 6" - 8" Sch 80 | |||
| 5" - 6 1/4" SDR 17 | |||
| 5" - 12" SDR 21 | |||
| 5" - 16" SDR 26 | |||
| 6 1/4" SDR 27.6 | |||
| 5" SDR 32.5 | |||
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Lodi, CA
Potable Water - Pipe and Fittings
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing** [1] [G] |
PVC 1120 IC-0 |
Certa-Lok™ IB Well Casing |
ASTM F480 |
| 4" - 4 1/2" Sch 40 | |||
| 4 1/2" SDR 17 | |||
| 4 1/2" SDR 26 | |||
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing** [1] [G] |
PVC 1120 IC-1 |
Certa-Lok™ IB Well Casing |
ASTM F480 |
| 5" - 8" SDR 17 | |||
| 5" - 6 1/4" SDR 21 | |||
| 5" SDR 26 | |||
| 6 1/4" SDR 27.6 | |||
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing** [1] [G] |
PVC 1120 IC-0 |
Certa-Lok™ Well Casing |
ASTM F480 |
| 16" Sch 40 | |||
| 10" - 16" SDR 17 | |||
| 16" SDR 21 | |||
| 16" SDR 26 | |||
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing** [1] [G] |
PVC 1120 IC-1 |
Certa-Lok™ Well Casing |
ASTM F480 |
| 10" - 16" SDR 17 | |||
| 16" SDR 21 | |||
| 16" SDR 26 | |||
| 16" Sch 40 | |||
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing[1] [G] |
PVC 1120 IC-0 |
Sure-Fit™ |
ASTM F480 |
| 2" - 4 1/2" Sch 40 | |||
| 4 1/2" SDR 17 | |||
| 5" - 6 1/4" SDR 17 | |||
| 4" SDR 21 | |||
| 2" - 4 1/2" SDR 26 | |||
| 4" SDR 32.5 | |||
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Well Casing[1] [G] |
PVC 1120 IC-1 |
Sure-Fit™ |
ASTM F480 |
| 5" - 16" Sch 40 | |||
| 6" - 8" Sch 80 | |||
| 5" - 6 1/4" SDR 17 | |||
| 5" - 12" SDR 21 | |||
| 5" - 16" SDR 26 | |||
| 6 1/4" SDR 27.6 | |||
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 83
Processing time was 0 seconds