These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=0F430&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Centennial Plastics, Inc. | ![]() |
| 1830 Centennial Avenue | |
| P.O. Box 329 | |
| Hastings, NE 68901 | |
| United States | |
| 402-462-2227 | |
| Visit this company's website |
Facility : Hastings, NE
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PE 3408/PE 3608 |
CenCore HDPE |
ASTM D2239 |
| 1/2" SIDR 11.5 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenCore HDPE |
ASTM D2239 |
| 3/4" - 2" SIDR 7 | |||
| 3/4" - 2" SIDR 9 | |||
| 3/4" - 2" SIDR 11.5 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenCore HDPE |
ASTM D2239 |
| 1" SIDR 19 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenFlo HDPE |
ASTM D2239 |
| 1/2" SIDR 7 | |||
| 1/2" SIDR 9 | |||
| 1/2" SIDR 11.5 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenFlo HDPE |
ASTM D2239 |
| 3/4" - 2" SIDR 7 | |||
| 3/4" - 2" SIDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenFlo HDPE |
ASTM D2239 |
| 3/4" - 2" SIDR 11.5 | |||
| 3/4" - 2" SIDR 15 | |||
| 1" - 2" SIDR 19 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PE 2406/PE 2708 |
CenFlo MDPE |
ASTM D2239 |
| 1/2" SIDR 11.5 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** These products also meet the requirements for PE 2406 per ASTM D3350-02. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PE 2406/PE 2708 |
CenFlo MDPE |
ASTM D2239 |
| 3/4" - 2" SIDR 11.5 | |||
| 3/4" - 1 1/4" SIDR 7 | |||
| 3/4" - 2" SIDR 15 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** These products also meet the requirements for PE 2406 per ASTM D3350-02. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenCore HDPE CTS |
ASTM D2737 |
| 1/2" SDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenCore HDPE CTS |
ASTM D2737 |
| 3/4" - 2" SDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenFlo HDPE CTS |
ASTM D2737 |
| 3/4" - 2" SDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenFuse |
ASTM D3035 |
| 3/4" - 6" SDR 7 | |||
| 3/4" - 6" SDR 9 | |||
| 3/4" - 6" SDR 11 | |||
| 3/4" - 6" SDR 13.5 | |||
| 3/4" - 6" SDR 15.5 | |||
| 3/4" - 6" SDR 17 | |||
| 1" - 6" SDR 21 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ [G] |
PE 4710 |
CenFuse |
ASTM D3035 |
| 3/4" - 6" SDR 7 | |||
| 3/4" - 6" SDR 9 | |||
| 3/4" - 6" SDR 11 | |||
| 3/4" - 6" SDR 13.5 | |||
| 3/4" - 6" SDR 15.5 | |||
| 3/4" - 6" SDR 17 | |||
| 1" - 6" SDR 21 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
Pro Turf Blue HDPE |
ASTM D2239 |
| 3/4" - 1 1/4" SIDR 15 | |||
| 1" - 1 1/4" SIDR 19 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
Pro Turf Green HDPE |
ASTM D2239 |
| 3/4" - 1 1/4" SIDR 15 | |||
| 3/4" - 1 1/4" SIDR 19 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PE 2406/PE 2708 |
Pro Turf Green MDPE |
ASTM D2239 |
| 3/4" - 1 1/4" SIDR 15 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** These products also meet the requirements for PE 2406 per ASTM D3350-02. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ [G] |
PE 3408/PE 3608 |
CPL Potable Water |
ASTM D2239 |
| 1/2" SIDR 9 | |||
| 1/2" SIDR 15 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CPL Potable Water |
ASTM D2239 |
| 3/4" - 2" SIDR 9 | |||
| 3/4" - 2" SIDR 15 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CPL Potable Water |
AWWA C901 |
| 1/2" SIDR 7 | |||
| 1/2" SIDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CPL Potable Water |
AWWA C901 |
| 3/4" - 2" SIDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenCore HDPE |
AWWA C901 |
| 3/4" - 2" SIDR 7 | |||
| 3/4" - 2" SIDR 9 | |||
| 3/4" - 2" SIDR 11.5 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenFlo HDPE |
AWWA C901 |
| 1/2" SIDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenFlo HDPE |
AWWA C901 |
| 3/4" - 2" SIDR 7 | |||
| 3/4" - 2" SIDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenFlo HDPE |
AWWA C901 |
| 3/4" - 2" SIDR 11.5 | |||
| 2" SIDR 15 | |||
| 2" SIDR 19 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenCore HDPE CTS |
AWWA C901 |
| 3/4" - 2" SDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + § [G] |
PE 3408/PE 3608 |
CenFlo HDPE CTS |
AWWA C901 |
| 3/4" - 2" SDR 9 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PE 3408/PE 3608 |
CenFuse |
AWWA C901 |
| 3/4" - 3" SDR 9 | |||
| 3/4" - 3" SDR 11 | |||
| 3/4" - 3" SDR 13.5 | |||
| 2" - 3" SDR 17 | |||
| 2" - 3" SDR 21 | |||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ [G] |
PE 4710 |
CenFuse |
AWWA C901 |
| 3/4" - 3" SDR 9 | |||
| 3/4" - 3" SDR 11 | |||
| 3/4" - 3" SDR 13.5 | |||
| 2" - 3" SDR 17 | |||
| 2" - 3" SDR 21 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 67
Processing time was 0 seconds


