These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=0N560&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Sea Tech, Inc. 
815 Chestnut Street
North Andover, MA 01845 
United States 
888-500-0056 
978-689-6165

Facility : Fujian, China

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings% § ++ [G]
MLTPL
SeaTech 24 Series Fitting
ASTM F877

Male Connector 1/2" CTS x 1/2" NPT
2401-1008

Female Swivel Connector 1/2" CTS x 1/2" NPS
2410-1008

Female Swivel Connector 1/2" CTS x 3/4" NPS
2410-1012

Female Swivel Connector 1/2" CTS x 3/4" CLOSET
2410-1013

Female Swivel Connector 1/2" CTS x 3/4" FGHT
2410-1014

Reducing Stem 1/2" CTS x 1/4" O.D.
2414-1004

Union Connector 1/2" CTS
2415-10

Reducing Union Connector 1/2" CTS x 3/8" CTS
2416-1008

Union Elbow 1/2" CTS
2417-10

Stackable Elbow 1/2" CTS
2418-10

Male Elbow 1/2" CTS x 1/2" NPT
2419-1008

Female Swivel Elbow 1/2" CTS x 1/2" NPS
2420-1008

Female Swivel Elbow 1/2" CTS x 3/4" NPS
2420-1012

Female Swivel Elbow 1/2" CTS x 3/4" CLOSET
2420-1013

Female Swivel Elbow 1/2" CTS x 3/4" FGHT
2420-1014

Union Tee 1/2" CTS
2423-10

Stackable Tee 1/2" CTS
2433-10

End Stop 1/2" CTS
2445-10 

% Fittings Certified for use with solid wall or 5 layer PEX only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# % ˘ ++ [G]
MLTPL
SeaTech 24 Series Fitting
CSA B137.5

Male Connector 1/2" CTS x 1/2" NPT
2401-1008

Female Swivel Connector 1/2" CTS x 1/2" NPS
2410-1008

Female Swivel Connector 1/2" CTS x 3/4" NPS
2410-1012

Female Swivel Connector 1/2" CTS x 3/4" CLOSET
2410-1013

Female Swivel Connector 1/2" CTS x 3/4" FGHT
2410-1014

Reducing Stem 1/2" CTS x 1/4" O.D.
2414-1004

Union Connector 1/2" CTS
2415-10

Reducing Union Connector 1/2" CTS x 3/8" CTS
2416-1008

Union Elbow 1/2" CTS
2417-10

Stackable Elbow 1/2" CTS
2418-10

Male Elbow 1/2" CTS x 1/2" NPT
2419-1008

Female Swivel Elbow 1/2" CTS x 1/2" NPS
2420-1008

Female Swivel Elbow 1/2" CTS x 3/4" NPS
2420-1012

Female Swivel Elbow 1/2" CTS x 3/4" CLOSET
2420-1013

Female Swivel Elbow 1/2" CTS x 3/4" FGHT
2420-1014

Union Tee 1/2" CTS
2423-10

Stackable Tee 1/2" CTS
2433-10

End Stop 1/2" CTS
2445-10 

# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F. System components consist of tubing and/or fittings.
% Fittings Certified for use with solid wall or 5 layer PEX only.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# % § ++ [G]
MLTPL
SeaTech 35 Series Fitting
ASTM F877

Male Connector 3/4" CTS x 3/8" NPT
3501-0806

Male Connector 3/8" CTS x 1/2" NPT
3501-0808

Male Connector 1/2" CTS x 3/8" NPT
3501-1006

Male Connector 1/2" CTS x 1/2" NPT
3501-1008

Male Connector 1/2" CTS x 3/4" NPT
3501-1012

Male Connector 1/2" CTS x 3/4" MGHT
3501-1014

Male Connector 3/4" CTS x 3/4" NPT
3501-1412

Male Connector 1" CTS x 1" NPT
3501-1816

Female Swivel Connector 3/8" CTS x 1/2" NPS
3510-0808

Female Swivel Connector 1/2" CTS x 1/2" NPS
3510-1008

Female Swivel Connector 1/2" CTS x 3/4" NPS
3510-1012

Female Swivel Connector 1/2" CTS x 3/4" CLOSET
3510-1013

Female Swivel Connector 1/2" CTS x 3/4" FGHT
3510-1014

Female Connector 3/4" CTS x 3/4" NPS
3510-1412

Female Connector 1" CTS x 1" NPS
3510-1816

Stackable Hose Barb Elbow 1/2" CTS x 1/2" HOSE
3512-1008

Hose Barb Fitting 1/2" CTS x 1/2" HOSE
3513-1008

Hose Barb Fitting 3/4" CTS x 3/4" HOSE
3513-1412

Hose Barb Fitting 1" CTS x 1" HOSE BAR
3513-1816

Reducing Stem 1/2" CTS x 3/8" CTS
3514-1008

Reducing Stem 3/4" CTS x 1/2" CTS
3514-1410

Reducing Stem 1" CTS x 1/2" CTS
3514-1810

Reducing Stem 1" CTS x 3/4" CTS
3514-1814

Union Connector 3/8" CTS
3515-08

Union Connector 1/2" CTS
3515-10

Union Connector 3/4" CTS
3515-14

Union Connector 1" CTS
3515-18

Reducing Union 1/2" CTS x 1/4" O.D.
3515R-1004

Reducing Union 1/2" CTS x 3/8" CTS
3515R-1008

Reducing Union 3/4" CTS x 1/2" CTS
3515R-1410

Reducing Union 1" CTS x 3/4" CTS
3515R-1814

Union Elbow 3/8" CTS
3517-08

Union Elbow 1/2" CTS
3517-10

Union Elbow 3/4" CTS
3517-14

Reducing Union Elbow 3/4" CTS x 1/2" CTS
3517-1410

Union Elbow 1" CTS
3517-18

Stackable Elbow 3/8" CTS
3518-08

Stackable Elbow 1/2" CTS
3518-10

Stackable Elbow 3/4" CTS
3518-14

Stackable Elbow 1" CTS
3518-18

Male Elbow 1/2" CTS x 3/8" NPT
3519-1006

Male Elbow 1/2" CTS x 1/2" NPT
3519-1008

Male Elbow 1" CTS x 1" NPT
3519-1816

Female Swivel Elbow 3/8" CTS x 1/2" NPS
3520-0808

Female Swivel Elbow 3/8" CTS x 3/4" CLOSET
3520-0813

Female Swivel Elbow 1/2" CTS x 1/2" NPS
3520-1008

Female Swivel Elbow 1/2" CTS x 3/4" NPS
3520-1012

Female Swivel Elbow 1/2" CTS x 3/4" CLOSET
3520-1013

Female Swivel Elbow 1/2" CTS x 3/4" FGHT
3520-1014

Drop Ear Elbow 1/2" CTS x 1/2" NPT
3521-1008

Union Tee 3/8" CTS
3523-08

Union Tee 1/2" CTS
3523-10

Union Tee 3/4" CTS
3523-14

Union Tee 1" CTS
3523-18

Reducing Branch Tee 1/2" CTS x 1/4" O.D.
3524R-1004

Reducing Branch Tee 3/4" CTS x 1/2" CTS
3524R-1410

Reducing Branch Tee 1" CTS x 3/4" CTS
3524R-1814

Reducing Run Tee 3/4" CTS x 1/2" CTS
3526-1410

Male Stem 1/2" CTS x 1/2" NPT
3527-1008

Female Stem 1/2" CTS x 1/2" NPS
3528-1008

Male Thread Tee 1/2" CTS x 1/2" NPT
3530-1008

Stackable Tee 3/8" CTS
3533-08

Stackable Tee 1/2" CTS
3533-10

Stackable Tee 3/4" CTS
3533-14

Stackable Tee 1" CTS
3533-18

Reducing Branch Stackable Tee 1/2" CTS x 1/4" OD
3533R-1004

Reducing Branch Stackable Tee 3/4" CTS x 1/2" CTS
3533R-1410

Stackable Branch Tee 1/2" CTS
3534-10

End Stop 3/8" CTS
3545-08

End Stop 1/2" CTS
3545-10

End Stop 3/4" CTS
3545-14

End Stop 1" CTS
3545-18

Union Pump Connector 1/2" CTS x QC PUMP
3575-10

Elbow Pump Connector 1/2" CTS x QC PUMP
3576-10

Return End 1" CTS
3585-18 

# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F. System components consist of tubing and/or fittings.
% Fittings Certified for use with solid wall or 5 layer PEX only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# % ˘ ++ [G]
MLTPL
SeaTech 35 Series Fitting
CSA B137.5

Male Connector 3/4" CTS x 3/8" NPT
3501-0806

Male Connector 3/8" CTS x 1/2" NPT
3501-0808

Male Connector 1/2" CTS x 3/8" NPT
3501-1006

Male Connector 1/2" CTS x 1/2" NPT
3501-1008

Male Connector 1/2" CTS x 3/4" NPT
3501-1012

Male Connector 1/2" CTS x 3/4" MGHT
3501-1014

Male Connector 3/4" CTS x 3/4" NPT
3501-1412

Female Swivel Connector 3/8" CTS x 1/2" NPS
3510-0808

Female Swivel Connector 1/2" CTS x 1/2" NPS
3510-1008

Female Swivel Connector 1/2" CTS x 3/4" NPS
3510-1012

Female Swivel Connector 1/2" CTS x 3/4" CLOSET
3510-1013

Female Swivel Connector 1/2" CTS x 3/4" FGHT
3510-1014

Female Connector 3/4" CTS x 3/4" NPS
3510-1412

Stackable Hose Barb Elbow 1/2" CTS x 1/2" HOSE
3512-1008

Hose Barb Fitting 1/2" CTS x 1/2" HOSE
3513-1008

Hose Barb Fitting 3/4" CTS x 3/4" HOSE
3513-1412

Reducing Stem 1/2" CTS x 3/8" CTS
3514-1008

Reducing Stem 3/4" CTS x 1/2" CTS
3514-1410

Union Connector 3/8" CTS
3515-08

Union Connector 1/2" CTS
3515-10

Union Connector 3/4" CTS
3515-14

Reducing Union 1/2" CTS x 1/4" O.D.
3515R-1004

Reducing Union 1/2" CTS x 3/8" CTS
3515R-1008

Reducing Union 3/4" CTS x 1/2" CTS
3515R-1410

Union Elbow 3/8" CTS
3517-08

Union Elbow 1/2" CTS
3517-10

Union Elbow 3/4" CTS
3517-14

Reducing Union Elbow 3/4" CTS x 1/2" CTS
3517-1410

Stackable Elbow 3/8" CTS
3518-08

Stackable Elbow 1/2" CTS
3518-10

Stackable Elbow 3/4" CTS
3518-14

Male Elbow 1/2" CTS x 3/8" NPT
3519-1006

Male Elbow 1/2" CTS x 1/2" NPT
3519-1008

Female Swivel Elbow 3/8" CTS x 1/2" NPS
3520-0808

Female Swivel Elbow 3/8" CTS x 3/4" CLOSET
3520-0813

Female Swivel Elbow 1/2" CTS x 1/2" NPS
3520-1008

Female Swivel Elbow 1/2" CTS x 3/4" NPS
3520-1012

Female Swivel Elbow 1/2" CTS x 3/4" CLOSET
3520-1013

Female Swivel Elbow 1/2" CTS x 3/4" FGHT
3520-1014

Drop Ear Elbow 1/2" CTS x 1/2" NPT
3521-1008

Union Tee 3/8" CTS
3523-08

Union Tee 1/2" CTS
3523-10

Union Tee 3/4" CTS
3523-14

Reducing Branch Tee 1/2" CTS x 1/4" O.D.
3524R-1004

Reducing Branch Tee 3/4" CTS x 1/2" CTS
3524R-1410

Reducing Run Tee 3/4" CTS x 1/2" CTS
3526-1410

Male Stem 1/2" CTS x 1/2" NPT
3527-1008

Female Stem 1/2" CTS x 1/2" NPS
3528-1008

Male Thread Tee 1/2" CTS x 1/2" NPT
3530-1008

Stackable Tee 3/8" CTS
3533-08

Stackable Tee 1/2" CTS
3533-10

Stackable Tee 3/4" CTS
3533-14

Reducing Branch Stackable Tee 1/2" CTS x 1/4" OD
3533R-1004

Reducing Branch Stackable Tee 3/4" CTS x 1/2" CTS
3533R-1410

Stackable Branch Tee 1/2" CTS
3534-10

End Stop 3/8" CTS
3545-08

End Stop 1/2" CTS
3545-10

End Stop 3/4" CTS
3545-14

Union Pump Connector 1/2" CTS x QC PUMP
3575-10

Elbow Pump Connector 1/2" CTS x QC PUMP
3576-10 

# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F. System components consist of tubing and/or fittings.
% Fittings Certified for use with solid wall or 5 layer PEX only.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Valves# % * § ++ [G]
MLTPL
SeaTech 35 Series Valve
ASTM F877

In-Line Valve 3/8" CTS
3539-08

In-Line Valve 1/2" CTS
3539-10

In-Line Valve 3/4" CTS
3539-14

In-Line Valve 1" CTS
3539-18

Reducing Valve 1/2" CTS x 1/4" O.D.
3539R-1004

Stackable Valve 1/2" CTS
3543-10

Reducing Stackable Valve 1/2" CTS x 1/4" O.D.
3543R-1004

Tee Valve 1/2" CTS x 1/4" O.D.
3550-1004

Tee Valve 1/2" CTS x 3/8" CTS
3550-1008

Tee Valve 3/4" CTS x 1/4" O.D.
3550-1404

Valved Tee 1/2" NPS x 1/2" NPT x 1/4" OD
3551-0408

Valved Tee 1/2" NPS x 1/2" NPT x 3/8" CTS
3551-0808

Panel Mount Valve 3/8" CTS
3559-08

Panel Mount Valve 1/2" CTS
3559-10

Dual Union Body 1" CTS
3583-1810

Dual Stem Body 1" CTS
3584-1810

Single Union Body 1" CTS x 1/2" CTS
3589-1810

Single Stem Body Right 1" CTS x 1/2" CTS
3590-1810

Single Stem Body Left 1" CTS x 1/2" CTS
3591-1810 

# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F. System components consist of tubing and/or fittings.
% Fittings Certified for use with solid wall or 5 layer PEX only.
* Fittings between 1/4" and 1" designated by 35 series part numbers.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Valves# % ˘ ++ [G]
MLTPL
SeaTech 35 Series Valve
CSA B137.5

In-Line Valve 3/8" CTS
3539-08

In-Line Valve 1/2" CTS
3539-10

In-Line Valve 3/4" CTS
3539-14

In-Line Valve 1" CTS
3539-18

Reducing Valve 1/2" CTS x 1/4" O.D.
3539R-1004

Stackable Valve 1/2" CTS
3543-10

Reducing Stackable Valve 1/2" CTS x 1/4" O.D.
3543R-1004

Tee Valve 1/2" CTS x 1/4" O.D.
3550-1004

Tee Valve 1/2" CTS x 3/8" CTS
3550-1008

Tee Valve 3/4" CTS x 1/4" O.D.
3550-1404

Valved Tee 1/2" NPS x 1/2" NPT x 1/4" OD
3551-0408

Valved Tee 1/2" NPS x 1/2" NPT x 3/8" CTS
3551-0808

Panel Mount Valve 3/8" CTS
3559-08

Panel Mount Valve 1/2" CTS
3559-10

Dual Union Body 1" CTS
3583-1810

Dual Stem Body 1" CTS
3584-1810

Single Union Body 1" CTS
3589-1810

Single Stem Body Right 1" CTS
3590-1810

Single Stem Body Left 1" CTS
3591-1810 

# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F. System components consist of tubing and/or fittings.
% Fittings Certified for use with solid wall or 5 layer PEX only.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Supply Stops% + [G]
MLTPL
LF3561-0604
ASTM F877

Type 61 Adapter Stop Valve
1/4" OD x 3/8" Male Comp 

% Fittings Certified for use with solid wall or 5 layer PEX only.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Supply Stops% + ˘ [G]
MLTPL
LF3561-0604
CSA B137.5

Type 61 Adapter Stop Valve
1/4" OD x 3/8" Male Comp 

% Fittings Certified for use with solid wall or 5 layer PEX only.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Supply Stops% + [G]
MLTPL
LF3561-0606
ASTM F877

Type 61 Adapter Stop Valve
3/8" OD x 3/8" Male Comp 

% Fittings Certified for use with solid wall or 5 layer PEX only.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Supply Stops% + ˘ [G]
MLTPL
LF3561-0606
CSA B137.5

Type 61 Adapter Stop Valve
3/8" OD x 3/8" Male Comp 

% Fittings Certified for use with solid wall or 5 layer PEX only.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 213
Processing time was 0 seconds