These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=0N870&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Georg Fischer Harvel LLC 
300 Kuebler Road
P.O. Box 757 
Easton, PA 18040 
United States 
610-252-7355

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement (1,2,3)+ [G] PVC PW, DWV, SW Harvel LXT® One-Step Solvent Cement ASTM D2564
Solvent Cement (2,3)+++ [G] CPVC PW, DWV, SW SeaCor Cement Heavy Bodied Medium Set Orange Low VOC ASTM F493
Primer (3)+++ [G] PVC/CPVC PW, DWV, SW SeaCor Primer Purple Low VOC primer ASTM F656

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
    requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
    Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
    2014.

    

    

(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
    Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and SeaCor Primer Purple Low VOC primer.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds