These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=11600&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Cresline Plastic Pipe Co., Inc. 
600 Cross Pointe Boulevard
Evansville, IN 47715 
United States 
270-826-8317

Facility : Phoenix, AZ

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D1785
1/2" - 2" Sch 120
1/2" - 12" Sch 40§

1/2" - 12" Sch 80§ 

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D2241
1/2" - 6" SDR 13.5§

3/4" - 12" SDR 21§

1 1/4" - 12" SDR 26§

1 1/4" - 8" SDR 32.5
3" - 8" SDR 41 

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-1
Cresline
ASTM F480
4" - 12" SDR 21
4" - 8" SDR 26
4" - 8" Sch 40
4" - 6" SDR 32.5
4" - 6" Sch 80
5" SDR 17
6" SDR 17 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Council Bluffs, IA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
Cresline HD
ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 1 1/4" SIDR 11.5
1" - 2" SIDR 19
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline HD
AWWA C901
3/4" - 2" SIDR 7 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline HD-CTS
AWWA C901
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline HD-CTS
ASTM D2737
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608

ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 1 1/4" SIDR 11.5
1" - 2" SIDR 19
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline NT
ASTM D2239
3/4" - 1 1/4" SIDR 7
1/2" - 2" SIDR 11.5
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline® CE Blue™
ASTM D2239
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline® CE Blue™
ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline® CE Blue™
ASTM D2239
1" - 2" SIDR 19 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline® CE Blue™
AWWA C901
3/4" - 2" SIDR 7 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline® CE Blue™
ASTM D2737
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline® CE Blue™
AWWA C901
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
1" - 2" Sch 120 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
1" - 2" Sch 120 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 26
1/2" - 12" SDR 21
5" SDR 17 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 26
1/2" - 12" SDR 21
5" SDR 17 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Cresline
ASTM F480
4" - 8" SDR 26
4" - 8" SDR 21
4 1/2" - 8" SDR 17
2" - 12" Sch 40
4 1/2" DR 20
6 1/4" DR 27.6 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Henderson, KY

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
Cresline HD
ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 1 1/4" SIDR 11.5
1" - 2" SIDR 19
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline HD
AWWA C901
3/4" - 2" SIDR 7 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline HD-CTS
ASTM D2737
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline HD-CTS
AWWA C901
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608

ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 1 1/4" SIDR 11.5
1" - 2" SIDR 19
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline NT
ASTM D2239
3/4" - 1 1/4" SIDR 7
1/2" - 2" SIDR 11.5
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D1785
1/2" - 12" Sch 40
1/2" - 8" Sch 80
1" - 2" Sch 120 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D1785
1/2" - 12" Sch 40
1/2" - 8" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 21
1/2" - 8" SDR 26
5" SDR 17 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 21
1/2" - 8" SDR 26
5" SDR 17 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]
CPVC 4120
Cresline HC
ASTM D2846
1/2" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]
CPVC 4120
Cresline Flowguard Gold HC
ASTM D2846
1/2" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]
CPVC 4120
Eagle
ASTM D2846
1/2" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]
CPVC 4120

ASTM D2846
1/2" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]
CPVC 4120
Nibco
ASTM D2846
1/2" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Cresline
ASTM F480
4" - 8" SDR 26
4" - 8" SDR 21
4 1/2" - 6" SDR 17
2" - 12" Sch 40
6 1/4" DR 27.6
4 1/2" DR 20
4 1/2" SDR 26 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Mechanicsburg, PA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
Cresline HD
ASTM D2239
1/2" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 1 1/4" SIDR 11.5
3/4" - 2" SIDR 15
1" - 2" SIDR 19 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
Cresline HD
AWWA C901
3/4" - 2" SIDR 7 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ ¢ [G]
PE 3608
Cresline HD
CSA B137.1
1/2" - 1 1/4" Series 125
3/4" - 2" Series 100
3/4" - 2" Series 160
3/4" - 2" Series 200
1" - 2" Series 80 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline HD-CTS
ASTM D2737
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ [G]
PE 3608
Cresline HD-CTS
AWWA C901
3/4" - 2" SDR 9 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+ ¢ [G]
PE 3608
Cresline HD-CTS
CSA B137.1
3/4" - 2" Series 200 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608

ASTM D2239
3/4" - 2" SIDR 7
3/4" - 1 1/4" SIDR 9
1/2" - 1 1/4" SIDR 11.5
1" - 2" SIDR 19
3/4" - 2" SIDR 15 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 26
1/2" - 8" SDR 21
5" SDR 17 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 26
1/2" - 8" SDR 21
5" SDR 17 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Cresline
ASTM F480
4" - 8" SDR 26
4" - 8" SDR 21
4 1/2" - 6" SDR 17
2" - 8" Sch 40
6 1/4" DR 27.6
4 1/2" DR 20 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Corsicana, TX

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Cresline PVC
ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 21
1/2" - 8" SDR 26
5" SDR 17
6" SDR 32.5 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120

ASTM D2241
1/2" - 8" SDR 13.5
1/2" - 8" SDR 21
1/2" - 8" SDR 26
5" SDR 17
6" SDR 32.5 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Cresline
ASTM F480
2" - 8" Sch 40
4 1/2" DR 20
4 1/2" - 6" SDR 17
4" - 8" SDR 26
4" - 8" SDR 21
6" SDR 32.5
6" SDR 32.5 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Chehalis, WA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PVC 1120
Cresline PVC
ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
1/2" - 2" Sch 120 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PVC 1120
Cresline PVC
ASTM D2241
1/2" - 4" SDR 13.5
3/4" - 12" SDR 21
1 1/4" - 12" SDR 26
1 1/4" - 12" SDR 32.5
3" - 12" SDR 41
5" SDR 17 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Cresline
ASTM F480
4" thru 8" SDR 21
4" - 8" SDR 26
2" - 12" Sch 40
4" - 8" SDR 17 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 171
Processing time was 0 seconds