These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=12670&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Boshart Industries Inc. 
25 Whaley Avenue
P.O. Box 310 
Milverton, ON N0K 1M0 
Canada 
519-595-4444
Visit this company's website

Facility : Milverton, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+ [G]

NP

SWP

ASTM D2609

90° Elbow, Insert x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

90° Male Elbow, MIP x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
3/4" x 3/4"

Adapters, MIP x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

Couplings, Insert x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

Tee, Insert x Insert x Insert
1 1/2" x 1 1/2" x 1 1/2" 1 1/4" x 1 1/4" x 1 1/4" 1" x 1" x 1" 1/2" x 1/2" x 1/2"
2" x 2" x 2" 3/4" x 3/4" x 3/4"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]

PVC

SWP

ASTM D2609

90° Elbow, Insert x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

90° Female Elbow, FPT x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1 1/4" x 3/4" 1" x 1"
1/2" x 1/2" 3/4" x 3/4"

90° Male Elbow, MIP x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

90° Reducer Elbow, Insert x Insert
1 1/4" x 1" 1" x 3/4" 3/4" x 1/2"

90° Reducer Female Elbow, FPT x Insert
1 1/4" x 3/4" 1" x 1 1/4" 1" x 1/2" 1" x 3/4"
3/4" x 1/2"

Adapters, MIP x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3" x 3" 3/4" x 3/4"

Couplings, Insert x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3" x 3" 3/4" x 3/4"

Elbow, FPT x Insert
1/2" x 1/2" 3/4" x 3/4"

Female Adapters, FPT x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

Female Tee, Insert x Insert x FPT
1 1/2" x 1 1/2" x 1 1/2" 1 1/4" x 1 1/4" x 1 1/4" 1" x 1" x 1" 1/2" x 1/2" x 1/2"
3/4" x 3/4" x 3/4"

Increasing Adapter, MIP x Insert
1 1/2" x 2" 1 1/4" x 1 1/2" 1" x 1 1/2" 1" x 1 1/4"
1/2" x 3/4" 3/4" x 1"

Male Tee, Insert x Insert x MIP
1 1/2" x 1 1/2" x 1 1/2" 1 1/4" x 1 1/4" x 1 1/4" 1" x 1" x 1" 1/2" x 1/2" x 1/2"
3/4" x 3/4" x 3/4"

Plug, Insert
1 1/2" 1 1/4" 1" 1/2"
2" 3/4"

Reducer Adapter, MIP x Insert
1 1/2" x 1 1/4" 1 1/2" x 1" 1 1/4" x 1" 1 1/4" x 3/4"
1" x 3/4" 2" x 1 1/2" 3/4" x 1/2"

Reducer Coupling, Insert x Insert
1 1/2" x 1 1/4" 1 1/2" x 1" 1 1/2" x 3/4" 1 1/4" x 1"
1 1/4" x 3/4" 1" x 1/2" 1" x 3/4" 2" x 1 1/2"
2" x 1 1/4" 2" x 1" 3/4" x 1/2"

Reducer Elbow, FPT x Insert
1" x 1/2" 3/4" x 1/2"

Reducer Female Tee, Insert x Insert x FPT
1 1/2" x 1 1/2" x 3/4" 1 1/4" x 1 1/4" x 1" 1 1/4" x 1 1/4" x 1/2" 1 1/4" x 1 1/4" x 3/4"
1" x 1" x 1/2" 1" x 1" x 3/4" 2" x 2" x 1" 2" x 2" x 3/4"
3/4" x 3/4" x 1/2"

Reducer Tee, Insert x Insert x Insert
1 1/2" x 1 1/2" x 1 1/4" 1 1/2" x 1 1/2" x 1" 1 1/2" x 1 1/2" x 1/2" 1 1/2" x 1 1/2" x 3/4"
1 1/4" x 1 1/4" x 1" 1 1/4" x 1 1/4" x 1/2" 1 1/4" x 1 1/4" x 3/4" 1" x 1" x 1/2"
1" x 1" x 3/4" 1/2" x 1/2" x 3/4" 2" x 2" x 1/2" 2" x 2" x 3/4"
3/4" x 1/2" x 1/2" 3/4" x 3/4" x 1" 3/4" x 3/4" x 1/2"

Tee, Insert x Insert x Insert
1 1/2" x 1 1/2" x 1 1/2" 1 1/4" x 1 1/4" x 1 1/4" 1" x 1" x 1" 1/2" x 1/2" x 1/2"
2" x 2" x 2" 3/4" x 3/4" x 3/4"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]

PP

SWP

ASTM D2609

90° Elbows, Insert x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

90° Male Elbows, MIP x Insert
1 1/2" x 1 1/2" 1" x 1" 1/2" x 1/2" 3/4" x 3/4"

90° Reducer Elbows, Insert x Insert
3/4" x 1/2"

Adapters, MIP x Insert
1 1/2" x 1 1/2" 1 1/4" x 1 1/4" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

Couplings, Insert x Insert
1 1/2" x 1 1/2" 1 1/4" x 1/14" 1" x 1" 1/2" x 1/2"
2" x 2" 3/4" x 3/4"

Increasing Adapter, MIP x Insert
1/2" x 3/4" 3/4" x 1"

Male Tee, Insert x Insert x MPT
1/2" x 1/2" x 1/2"

Plug, Insert
1" 1/2" 3/4"

Reducer Adapter, MIP x Insert
1" x 3/4" 3/4" x 1/2"

Reducer Coupling, Insert x Insert
1 1/4" x 1" 1" x 1/2" 1" x 3/4" 3/4" x 1/2"

Reducer Tee, Insert x Insert x Insert
1" x 1" x 1/2" 1" x 1" x 3/4" 3/4" x 3/4" x 1/2"

Tee, Insert x Insert x Insert
1 1/2" x 1 1/2" x 1 1/2" 1 1/4" x 1 1/4" x 1 1/4" 1" x 1" x 1" 1/2" x 1/2" x 1 /2"
2" x 2" x 2" 3/4" x 3/4" x 3/4"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 193
Processing time was 0 seconds