These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=14680&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Durman Esquivel S.A. | |
| Zona Franca Propark | |
| Contiguo a La Dos Pinos | |
| El Coyol De Alajuela | |
| Costa Rica | |
| 506-436-4700 |
Facility : # 1 San Jose, Costa Rica
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I |
DURMAN |
ASTM D2466 |
|
45° Elbow (Slip x Slip)(240) |
|||
| 1/2" - 6" | |||
|
90° Elbow (Slip x Slip)(232) |
|||
| 1/2" - 6" | |||
|
Cap (FPT)(296) |
|||
| 1/2" - 6" | |||
|
Cap (Slip)(258) |
|||
| 1/2" - 6" | |||
|
Combination & Reducing Tee(Slip x Slip x FPT)(256) |
|||
| 1" x 1" x 1/2" | 1 1/2" x 1 1/2" x 1/2" | 2" x 2" x 1/2" | |
|
Combination 90° Elbow (Slip x FPT)(248) |
|||
| 1/2" - 3" | |||
|
Combination Tee (Slip x Slip x FPT)(256) |
|||
| 1/2" - 2" | |||
|
Coupling (FPT x FPT)(237) |
|||
| 1/2" x 1/2" | 3/4" x 3/4" | ||
|
Coupling (Slip x Slip)(230) |
|||
| 1/2" - 6" | |||
|
Female Adapter (Slip x FPT)(236) |
|||
| 1/2" - 6" | |||
|
Male Adapter (Slip x MPT)(238) |
|||
| 1/2" - 6" | |||
|
Plug (MPT)(206) |
|||
| 1/2" - 4" | |||
|
Reducer Bushing (Slip x Slip)(231) |
|||
| 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | 1 1/4" x 1/2" |
| 1 1/4" x 3/4" | 1 1/4" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4" |
| 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1/2" | 2" x 3/4" |
| 2" X 1" | 2" x 1 1/4" | 2" x 1 1/2" | 2 1/2" x 2" |
| 3" x 3/4" | 3" x 1" | 3" x 1 1/2" | 3" x 2" |
| 3" x 2 1/2" | 4" x 2" | 4" x 3" | 6" x 4" |
|
Reducing Tee (Slip x Slip x Slip)(276) |
|||
| 3/4" x 3/4" x 1/2" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | 1 1/2" x 1 1/2" x 1/2" |
| 1 1/2" x 1 1/2" x 1" | 2" x 2" x 1/2" | 2" x 2" x 3/4" | |
|
Tee (Slip x Slip x Slip)(234) |
|||
| 1/2" - 6" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC I |
IPEX |
ASTM D2466 |
|
45° Elbow (Slip x Slip)(240) |
|||
| 1/2" - 6" | |||
|
90° Elbow (Slip x Slip)(232) |
|||
| 1/2" - 6" | |||
|
Cap (FPT)(296) |
|||
| 1/2" - 6" | |||
|
Cap (Slip)(258) |
|||
| 1/2" - 6" | |||
|
Combination & Reducing Tee (Slip Slip x FPT)(256) |
|||
| 1" x 1" x 1/2" | 1 1/2" x 1 1/2" x 1/2" | 2" x 2" x 1/2" | |
|
Combination 90° Elbow (Slip x FPT)(248) |
|||
| 1/2" - 3" | |||
|
Combination Tee (Slip x Slip x FPT)(256) |
|||
| 1/2" - 2" | |||
|
Coupling (FPT x FPT)(237) |
|||
| 1/2" x 1/2" | 3/4" x 3/4" | ||
|
Coupling (Slip x Slip)(230) |
|||
| 1/2" - 6" | |||
|
Female Adapter (Slip x FPT)(236) |
|||
| 1/2" - 6" | |||
|
Male Adapter (Slip x MPT)(238) |
|||
| 1/2" - 6" | |||
|
Plug (MPT)(206) |
|||
| 1/2" - 4" | |||
|
Reducer Bushing (Slip x Slip)(231) |
|||
| 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | 1 1/4" x 1/2" |
| 1 1/4" x 3/4" | 1 1/4" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4" |
| 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1/2" | 2" x 3/4" |
| 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" | 2 1/2" x 2" |
| 3" x 3/4" | 3" x 1" | 3" x 1 1/2" | 3" x 2" |
| 3" x 2 1/2" | 4" x 2" | 4" x 3" | 6" x 4" |
|
Reducing Tee (Slip x Slip x Slip)(276) |
|||
| 3/4" x 3/4" x 1/2" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | 1 1/2" x 1 1/2" x 1/2" |
| 1 1/2" x 1 1/2" x 1" | 2" x 2" x 1/2" | 2" x 2" x 3/4" | |
|
Tee (Slip x Slip x Slip)(234) |
|||
| 1/2" - 6" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 94
Processing time was 0 seconds