These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=19502&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Genova Products, Inc. 
7034 East Court Street
P.O. Box 309 
Davison, MI 48423 
United States 
800-521-7488 
810-744-4500
Visit this company's website

Facility : Rensselaer, IN

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Tubing+++ [G]

CPVC 4120

GENOVA

ASTM D2846
1/2" - 3/4" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

GENOVA

CSA B137.6
3/8" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

GENOVA FLOWGUARD GOLD

ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

GENOVA FLOWGUARD GOLD

CSA B137.6
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER

ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER

CSA B137.6
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER PRO

ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER PRO

CSA B137.6
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Faribault, MN

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Tubing$ +++ [G]

CPVC 4120

GENOVA

ASTM D2846

3/8" - 2" SDR 11

$ Product Designation may either be Genova or Uncopper
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

GENOVA

CSA B137.6
3/8" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing* +++ [G]

PE-RT 4710

GENOVA

ASTM F2769
1/8" - 1"

* xx indicates size of the fitting
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

GENOVA FLOWGUARD GOLD

ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

GENOVA FLOWGUARD GOLD

CSA B137.6
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER

ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER

CSA B137.6
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER PRO

ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing+++ [G]

CPVC 4120

UNCOPPER PRO

CSA B137.6
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings$ +++ [G]

CPVC 41

GENOVA

BS 7291

45 Elbows
3/4" 1" 1 1/4" 16mm
20mm 25mm 32mm

45 Street Elbows
3/4" 16mm 20mm 25mm
32mm

90 Elbows
3/4" 1" 1 1/4" 16mm
20mm 25mm 32mm

90 Street Elbows
3/4" 16mm 20mm 25mm
32mm

Bushings Sch CPVC
1" x 3/4" 2" x 3/4" 1 1/4" x 1" 1 1/4" x 3/4"
1 1/2" x 1" 20mm x 16mm 32mm x 25mm 25mm x 20mm
25mm x 16mm

Caps
3/4" 1" 1 1/4" 16mm
20mm 25mm 32mm

Couplings
3/4" 3/4" x 1/2" 1" 1 1/4"
16mm 20mm 25mm 32mm

Female Threaded Adapters
3/4" 1"

Male Threaded Adapters
3/4" 1" 1 1/4"

Reducing Tees
1" x 1" x 3/4" 1 1/4" x 1 1/4" x 3/4" 1 1/4" x 1 1/4" x 1" 3/4" x 1/2" x 3/4"
20mm x 16mm x 20mm 20mm x 16mm x 16mm

Tees
3/4" 1" 1 1/4" 16mm
20mm 25mm 32mm

$ Product Designation may either be Genova or Uncopper
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing$ +++ [G]

CPVC 4120

GENOVA

BS 7291* **
1/2" - 2" 16mm - 50mm

$ Product Designation may either be Genova or Uncopper
* xx indicates size of the fitting
** Certification is to parts 1 and 4, Class H.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings$ +++ [G]

CPVC 41

GENOVA

ASTM D2846

45° Elbows
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

45° Street Elbows
1/2" 3/4"

90° Elbows
1/2" 3/4" 1" 1 1/4"
1 1/2" 2" 3/4" x 1/2"

90° Street Elbows
1/2" 3/4"

Bushings
1" x 1/2" 1" x 3/4" 2" x 1 1/4" 2" x 1/2"
2" x 3/4" 1 1/4" x 1" 1 1/4" x 1/2" 1 1/4" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 1 1/2" x 1/2" 1 1/2" x 3/4"
3/4" x 1/2" 2" x 1" 2" x 1 1/2"

Caps
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Couplings
1/2" 3/4" 3/4" x 1/2" 1"
1 1/4" 1 1/2" 2"

Female Threaded Adapters
1/2" 1/2" x 1/8" NPT 3/4" 1"

Female wing Ell
1/2" CPVC X 1/2" FIP

Male Threaded Adapters
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Reducing Tees
3/4" x 3/4" x 1/2" 3/4" x 1/2" x 1/2" 1" x 1" x 1/2" 1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1/2" 1 1/4" x 1 1/4" x 3/4" 1 1/4" x 1 1/4" x 1" 1 1/2" x 1 1/2" x 1/2"
1 1/2" x 1 1/2" x 3/4" 1 1/2" x 1 1/2" x 1" 1 1/2" x 1 1/2" x 1 1/4" 2" x 2" x 1"
2" x 2" x 1 1/4" 2" x 2" x 1 1/2" 3/4" x 1/2" x 3/4"

Tees
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Wing Ell
1/2" CPVC X 1/2" CPVC

Wing Tee
1/2" CPVC

$ Product Designation may either be Genova or Uncopper
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings$ +++

CPVC/Brass

GENOVA

ASTM D2846

One Piece Transition Fitting - Wing Ell
1/2" (57072Z)[G]

Transition Adapter (Slip x Brass FIP)
1/2" (57905Z)[G] 3/4" (57907Z)[G]

Transition Adapter (Slip x Brass MIP)
1/2" (57605Z)[G] 3/4" (57607Z)[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
$ Product Designation may either be Genova or Uncopper
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings (PW)% +++

CPVC/Brass

GENOVA UNION

ASTM F1970
1/2" CPVC x 1/2" CPVC (53021)[G]

3/4" CPVC x 3/4" CPVC (53026)[G]

Transition Union (Slip x FIP)
1/2" (53035Z)[G] 3/4" (53040Z)[G]

Transition Union (Slip x MIP)
1/2" (53045Z)[G] 3/4" (53050Z)[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
% Product tested for use in commercial hot water (180°F) applications with a
  rated pressure of 100 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings (PW)% +++

CPVC/Brass

GENOVA MH

ASTM F1970

Drop Ear Elbow (Slip x Brass FIP)
1/2" (53071Z)[G]

Transition Union (Slip x Brass Compression)
1/2" (53034Z)[G] 3/4" (53044Z)[G]

Transition Union (Slip x Brass FIP)
1/2" (53373Z)[G] 3/4" (53375Z)[G]

Transition Union (Slip x Brass MIP)
1/2" (53374Z)[G] 1/2" x 3/4" (53037Z)[G] 3/4" (53376Z)[G]

Transition Union (Slip x Brass Slip)
1/2" (53033Z)[G] 3/4" (53043Z)[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
% Product tested for use in commercial hot water (180°F) applications with a
  rated pressure of 100 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Appurtenance (PW)% + [G]

CPVC 41

GENOVA

ASTM F1970

Straight Line Valve
1/2" 3/4"

Supply Valve
1/2"

% Product tested for use in commercial hot water (180°F) applications with a
  rated pressure of 100 PSI.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Appurtenance (PW)% +++ [G]

CPVC 41

GENOVA

ASTM F1970

Lavatory Riser Adapter
1/2" CTS x 1/4" 1/2" CTS x 3/8"

Lavatory Riser Adapter Nut
1/4" 3/8"

% Product tested for use in commercial hot water (180°F) applications with a
  rated pressure of 100 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings% +++ [G]

CPVC 41

GENOVA

ASTM F1970

Swivel Coupling Fixture
1/2"

Swivel Elbow Fixture
1/2"

Swivel Elbow Riser Adapter
1/2"

% Product tested for use in commercial hot water (180°F) applications with a
  rated pressure of 100 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings$ +++ [G]

CPVC 41

GENOVA

CSA B137.6

45° Elbows
1/2" 3/4" 1" 1 1 /4"
1 1/2" 2"

45° Street Elbows
1/2" 3/4"

90° Elbows
1/2" 3/4" 1" 1 1/4"
1 1/2" 2" 3/4" x 1/2"

90° Street Elbows
1/2" 3/4"

Bushings
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2"

Caps
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Couplings
1/2" 3/4" 3/4" x 1/2" 1"
1 1/4" 1 1/2" 2"

Female Threaded Adapters
1/2" 1/2" x 1/8" NPT 3/4" 1"

Female Wing Ell
1/2" CPVC x 1/2" FIP

Male Threaded Adapters
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Reducing Tees
3/4" x 1/2" x 1/2" 3/4" x 1/2" x 3/4" 3/4" x 3/4" x 1/2" 1" x 1" x 1/2"
1" x 1" x 3/4" 1 1/4" x 1 1/4" x 1/2" 1 1/4" x 1 1/4" x 3/4" 1 1/4" x 1 1/4" x 1"
1 1/2" x 1 1/2" x 1/2" 1 1/2" x 1 1/2" x 3/4" 1 1/2" x 1 1/2" x 1" 1 1/2" x 1 1/2" x 1 1/4"
2" x 2" x 1" 2" x 2" x 1 1/4" 2" x 2" x 1 1/2"

Tees
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Wing Ell
1/2" CPVC x 1/2" CPVC

Wing Tees
1/2" CPVC

$ Product Designation may either be Genova or Uncopper
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 274
Processing time was 0 seconds