These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=1B750&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Linx, Limited | |
| 875 Aquidneck Avenue | |
| Middletown, RI 02842 | |
| United States | |
| 401-841-0600 |
Facility : # 3 Zhejiang Province, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings^ ˘ § ++ [G] |
Brass C69300 |
UniGrip Fittings |
ASTM F877 |
|
Transition Adapters |
|||
| 1/2" (E4045-A) | 3/4" (E7075-A) | ||
^ Push fit fittings can be utilized in underground applications and as manufactured joints without access panels as per manufacturer's installation instructions. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings^ ˘ § ++ [G] |
Brass C69300 |
UniGrip Fittings |
CSA B137.5 |
|
Transition Adapters |
|||
| 1/2" (E4045-A) | 3/4" (E7075-A) | ||
^ Push fit fittings can be utilized in underground applications and as manufactured joints without access panels as per manufacturer's installation instructions. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ˘ § ++ [G] |
Brass C69300 |
UNIPEX |
ASTM F1807 |
|
Adapter (Swivel) - PEX x Closet - Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x FPT Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x NPSM Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX to PB (with crimp rings) |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x Compression |
|||
| 3/8" - 1/2" | |||
|
Adapter - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1 1/4" | ||
|
Adapter - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1 1/4" | 1 1/2" x 1 1/2" | 2" x 2" |
|
Adapter - PEX x MPT |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1" | ||
|
Adapter - PEX x PE |
|||
| 3/8" - 1 1/4" | |||
|
Adapter – PEX x MPT DZR |
|||
| 3/8" x 1/2" (E8102-0405) | |||
|
Coupling - PEX x PEX |
|||
| 3/8" - 1 1/4" | 1 1/4" x 3/4" | 1 1/2" x 3/4" | 1 1/2" x 1" |
|
Coupling - PEX x PEX Not Drilled Through |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x FPT, Drop Ear |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x PEX |
|||
| 3/8" - 1 1/4" | |||
|
MAN6BARBG PEX x Swivel Adapter |
|||
| 1" | |||
|
MANPLUGG Plug Seal |
|||
| 1" | |||
|
MANYBARBG PEX x Swivel Adapter |
|||
| 3/4" | |||
|
Plug - PEX |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1" x 1" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/2" 1/2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 1/2" | 2" x 2" x 3/4" |
| 2" x 2" x 1 1/2" | |||
|
Tee - PEX Reducing |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
UNIPEX HEX NIPPLES - NPT x NPT |
|||
| E306-R-86 1/2" x 3/8" | E306-8 1/2" x 1/2" | E306-R-126 3/4" x 3/8" | E306-R-128 3/4" x 1/2" |
| E306-12 3/4" x 3/4" | E306-R-168 1" x 1/2" | E306-R1612 1" x 3/4" | E306-R-1616 1" x 1" |
| E306-R-1812 1 1/4" x 3/4" | E306-R-1816 1 1/4" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings* § ++ [G] |
Brass C69300 |
UNIPEX |
ASTM F877 |
|
Adapter (PEX x Compression) |
|||
| 3/8" - 1/2" | |||
|
Adapter (PEX x F Sweat) |
|||
| 1 1/4" x 1 1/4" | 1 1/2" x 1 1/2" | 2" x 2" | |
|
Adapter (PEX x FPT) |
|||
| 1 1/2" x 1 1/2" | 2" x 2" | ||
|
Adapter (PEX x M Sweat) |
|||
| 1 1/4" x 1 1/4" | 1 1/2" x 1 1/2" | 2" x 2" | |
|
Adapter (PEX x MPT) |
|||
| 1 1/4" x 1" | 1 1/2" | 2" | |
|
Adapter – PEX x MPT DZR |
|||
| 3/8" x 1/2" (E8102-0405) | |||
|
Coupling (PEX x PEX) |
|||
| 1 1/2" | 1 1/4" x 3/4" | 1 1/2" x 3/4" | 1 1/2" x 1" |
| 1 1/2" x 1 1/4" | 2" | 2" x 1 1/2" | |
|
Elbow (PEX x PEX) |
|||
| 1 1/2" | 2" | ||
|
MAN6BARBG PEX x Swivel Adapter |
|||
| 1" | |||
|
MANPLUGG Plug Seal |
|||
| 1" | |||
|
MANYBARBG PEX x Swivel Adapter |
|||
| 3/4" | |||
|
Tee (PEX) |
|||
| 1 1/2" | 2" | 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1" x 1" |
| 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" 1/2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 1/2" |
| 2" x 2" x 3/4" | 2" x 2" x 1 1/2" | ||
|
Tee, Reducing (PEX) |
|||
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 2" x 2" x 1" | 2" x 2" x 1 1/4" |
| 2" x 2" x 1 1/2" | |||
|
Test Plug (PEX) |
|||
| 1 1/2" | 2" | ||
|
UNIPEX HEX NIPPLES - NPT x NPT |
|||
| E306-R-86 1/2" x 3/8" | E306-8 1/2" x 1/2" | E306-R-126 3/4" x 3/8" | E306-R-128 3/4" x 1/2" |
| E306-12 3/4" x 3/4" | E306-R-168 1" x 1/2" | E306-R1612 1" x 3/4" | E306-R-1616 1" x 1" |
| E306-R-1812 1 1/4" x 3/4" | E306-R-1816 1 1/4" x 1" | ||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ˘ § ++ [G] |
Brass C69300 |
UNIPEX |
CSA B137.5 |
|
Adapter (Swivel) - PEX x Closet - Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x FPT Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x NPSM Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX to PB (with crimp rings) |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x Compression |
|||
| 3/8" - 1/2" | |||
|
Adapter - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1 1/4" | ||
|
Adapter - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1 1/4" | 1 1/2" x 1 1/2" | 2" x 2" |
|
Adapter - PEX x MPT |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1" | ||
|
Adapter - PEX x PE |
|||
| 3/8" - 1 1/4" | |||
|
Coupling - PEX x PEX |
|||
| 3/8" - 1 1/4" | 1 1/4" x 3/4" | 1 1/2" x 3/4" | 1 1/2" x 1" |
|
Coupling - PEX x PEX Not Drilled Through |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x FPT, Drop Ear |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x PEX |
|||
| 3/8" - 1 1/4" | |||
|
MAN6BARBG PEX x Swivel Adapter |
|||
| 1" | |||
|
MANPLUGG Plug Seal |
|||
| 1" | |||
|
MANYBARBG PEX x Swivel Adapter |
|||
| 3/4" | |||
|
Plug - PEX |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX |
|||
| 3/8" - 1 1/4" | 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1" x 1" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/2" 1/2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 1/2" | 2" x 2" x 3/4" |
| 2" x 2" x 1 1/2" | |||
|
Tee - PEX Reducing |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
UNIPEX HEX NIPPLES - NPT x NPT |
|||
| E306-8 1/2" x 1/2" | E306-R1612 1" x 3/4" | E306-R-86 1/2" x 3/8" | E306-R-168 1" x 1/2" |
| E306-R-1816 1 1/4" x 1" | E306-R-1812 1 1/4" x 3/4" | E306-R-1616 1" x 1" | E306-12 3/4" x 3/4" |
| E306-R-128 3/4" x 1/2" | E306-R-126 3/4" x 3/8" | ||
@ These fittings meet all the requirements under F1807 and F877. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Ball Valves˘ § ++ [G] |
Brass C69300 |
UniGrip Ball Valves |
ASTM F877 |
| E9305-05 1/2" | E9305-07 3/4" | E9305-08 1" | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Ball Valves˘ § ++ [G] |
Brass C69300 |
UniGrip Ball Valves |
CSA B137.5 |
| E9305-05 1/2" | E9305-07 3/4" | E9305-08 1" | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings˘ § ++ [1] [G] |
Brass C69300 |
UniGrip Fittings |
ASTM F877 |
|
Adapter, UniGrip x FPT |
|||
| E9103-XXXX | |||
|
Adapter, UniGrip x MPT |
|||
| E9102-XXXX | |||
|
Coupling |
|||
| E9101-XXXX | |||
|
Drop Ear Elbow, UniGrip x FPT |
|||
| E9095-0505 | E9095-04505 | ||
|
Drop Ear Elbow, UniGrip x UniGrip |
|||
| E9091-0505 | |||
|
Elbow |
|||
| E9201-XXXX | |||
|
Elbow, UniGrip x FNPT |
|||
| E9203-0505 | |||
|
Elbow, UniGrip x MNPT |
|||
| E9202-0505 | |||
|
Tee |
|||
| E9401-XXXXXX | |||
|
Tee, reducing |
|||
| E9401-XXXXXX | |||
|
Test Cap |
|||
| E9109-XX | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Each set of XX may be 01 (3/8"), 05 (1/2"), 07 (3/4") or 08 (1"). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings˘ § ++ [2] [G] |
Brass C69300 |
UniGrip Fittings |
CSA B137.5 |
|
Adapter, UniGrip x FPT |
|||
| E9103-XXXX | |||
|
Adapter, UniGrip x MPT |
|||
| E9102-XXXX | |||
|
Coupling |
|||
| E9101-XXXX | |||
|
Drop Ear Elbow, UniGrip x FPT |
|||
| E9095-0505 | E9095-04505 | ||
|
Drop Ear Elbow, UniGrip x UniGrip |
|||
| E9091-0505 | |||
|
Elbow |
|||
| E9201-XXXX | |||
|
Elbow, UniGrip x FNPT |
|||
| E9203-0505 | |||
|
Elbow, UniGrip x MNPT |
|||
| E9202-0505 | |||
|
Tee |
|||
| E9401-XXXXXX | |||
|
Tee, reducing |
|||
| E9401-XXXXXX | |||
|
Test Cap |
|||
| E9109-XX | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [2] 3/8" sizes for use with Cu and PEX only. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Supply Stops˘ § ++ [G] |
Brass C69300 |
Unigrip Supply Stops |
ASME A112.18.1/CSA B125.1 |
| E9601-0506 1/2" UG x 5/8" Comp (straight) | E9701-0505 1/2" x 1/2" UG (straight) | E9702-0505 1/2" x 1/2" UG (angle) | E9602-0506 1/2" x 5/8" Comp (angle) |
| E9602-0505 1/2" x 1/2" Comp (angle) | E9601-0503 1/2" UG x 1/4" Comp (straight) | E9601-0504 1/2" UG x 3/8" Comp (straight) | E9601-0505 1/2" UG x 1/2" Comp (straight) |
| E9602-0503 1/2" x 1/4" Comp (angle) | E9801-0505 1/2" UG x 1/2" MNPT (straight) | E9602-0504 1/2" x 3/8" Comp (angle) | E9802-0505 1/2" UG x 1/2" MNPT (angle) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Shanghai, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § ++ [G] |
MLTPL |
UniGrip |
ASTM F877 |
|
1/2" Polysulfone UniGrip x FPT Swivel Adapter |
|||
| 291130505 | |||
|
3/4" Polysulfone UniGrip x FPT Swivel Adapter |
|||
| 291130707 | |||
|
UniGrip Adapter[2] |
|||
| C9102-XXXX | C9103-XXXX | ||
|
UniGrip Adapter, UniGrip x MPT[1] |
|||
| 29102-XXXX | |||
|
UniGrip Coupling[1] |
|||
| 29101-XXXX | |||
|
UniGrip Coupling[2] |
|||
| C9101-XXXX | |||
|
UniGrip Elbow[1] |
|||
| 29201-XXXX | |||
|
UniGrip Elbow[2] |
|||
| C9201-XXXX | C9202-XXXX | C9203-XXXX | |
|
UniGrip Tee[1] |
|||
| 29401-XXXXXX | |||
|
UniGrip Tee[2] |
|||
| C9401-XXXXXX | |||
|
UniGrip Tee, Reducing[2] |
|||
| C9401-XXXXXX | |||
|
UniGrip Test Cap[1] |
|||
| 29109-XX | |||
|
UniGrip Test Cap[2] |
|||
| C9109-XX | |||
[2] Each set of XX may be 05 (1/2"), 07 (3/4"), or 08 (1"). [1] Each set of XX may be 05 (1/2") or 07 (3/4"). ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings˘ § ++ [G] |
MLTPL |
UniGrip |
CSA B137.5 |
|
1/2" Polysulfone UniGrip x FPT Swivel Adapter |
|||
| 291130505 | |||
|
3/4" Polysulfone UniGrip x FPT Swivel Adapter |
|||
| 291130707 | |||
|
UniGrip Adapter[2] |
|||
| C9102-XXXX | C9103-XXXX | ||
|
UniGrip Adapter, UniGrip x MPT[1] |
|||
| 29102-XXXX | |||
|
UniGrip Coupling[1] |
|||
| 29101-XXXX | |||
|
UniGrip Coupling[2] |
|||
| C9101-XXXX | |||
|
UniGrip Elbow[1] |
|||
| 29201-XXXX | |||
|
UniGrip Elbow[2] |
|||
| C9201-XXXX | C9202-XXXX | C9203-XXXX | |
|
UniGrip Tee[1] |
|||
| 29401-XXXXXX | |||
|
UniGrip Tee[2] |
|||
| C9401-XXXXXX | |||
|
UniGrip Tee, Reducing[2] |
|||
| C9401-XXXXXX | |||
|
UniGrip Test Cap[1] |
|||
| 29109-XX | |||
|
UniGrip Test Cap[2] |
|||
| C9109-XX | |||
[2] Each set of XX may be 05 (1/2"), 07 (3/4"), or 08 (1"). [1] Each set of XX may be 05 (1/2") or 07 (3/4"). ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 237
Processing time was 0 seconds

