These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=21250&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Georg Fischer Harvel LLC | |
| Kuebler Road | |
| P.O. Box 757 | |
| Easton, PA 18042-0757 | |
| United States | |
| 610-252-7355 | |
| Visit this company's website |
Facility : Bakersfield, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
+GF+ HARVEL PVC |
ASTM D1785 |
| 1/8" - 24" Sch 40 | |||
| 1/8" - 24" Sch 80 | |||
| 1/2" - 8" Sch 120 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
 |
ASTM D1785 |
| 1/8" - 24" Sch 40 | |||
| 1/8" - 24" Sch 80 | |||
| 1/2" - 8" Sch 120 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
+GF+ HARVEL PVC |
ASTM D2241 |
| 1/2" SDR 13.5 | |||
| 3/4" - 10" SDR 21 | |||
| 1" - 24" SDR 26 | |||
| 18" SDR 41 | |||
| 20" SDR 41 | |||
| 24" SDR 41 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
|
ASTM D2241 |
| 1/2" SDR 13.5 | |||
| 3/4" - 10" SDR 21 | |||
| 1" - 24" SDR 26 | |||
| 18" SDR 41 | |||
| 20" SDR 41 | |||
| 24" SDR 41 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ HARVEL CPVC |
ASTM D2846 |
| 3/8" - 2" SDR 11 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
ASTM D2846 |
| 3/8" - 2" SDR 11 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
+GF+ HARVEL CPVC |
CSA B137.6 |
| 3/8" - 2" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
|
CSA B137.6 |
| 3/8" - 2" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ HARVEL CPVC |
ASTM F441 |
| 1/4" - 16" Sch 40 | |||
| 1/4" - 16" Sch 80 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
ASTM F441 |
| 1/4" - 16" Sch 40 | |||
| 1/4" - 16" Sch 80 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ HARVEL BLAZEMASTER® |
ASTM F442 |
| 3/4" - 3" SDR 13.5 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
ASTM F442 |
| 3/4" - 3" SDR 13.5 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
+GF+ HydroKing Commercial |
ASTM F442 |
| 2 1/2" - 8" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
+GF+ HydroKing Commercial |
CSA B137.6 |
| 2 1/2" - 4" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Easton, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
+GF+ HARVEL PVC |
ASTM D1785 |
| 1/8" - 24" Sch 40 | |||
| 1/8" - 24" Sch 80 | |||
| 1/2" - 8" Sch 120 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
 |
ASTM D1785 |
| 1/8" - 24" Sch 40 | |||
| 1/8" - 24" Sch 80 | |||
| 1/2" - 8" Sch 120 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
+GF+ HARVEL PVC |
ASTM D2241 |
| 1/2" SDR 13.5 | |||
| 3/4" - 10" SDR 21 | |||
| 1"- 24" SDR 26 | |||
| 18" SDR 41 | |||
| 20" SDR 41 | |||
| 24" SDR 41 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
|
ASTM D2241 |
| 1/2" SDR 13.5 | |||
| 3/4" - 10" SDR 21 | |||
| 1" - 24" SDR 26 | |||
| 18" SDR 41 | |||
| 20" SDR 41 | |||
| 24" SDR 41 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ HARVEL CPVC |
ASTM D2846 |
| 3/8" - 2" SDR 11 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
ASTM D2846 |
| 3/8" - 2" SDR 11 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
+GF+ HARVEL CPVC |
CSA B137.6 |
| 3/8" - 2" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
|
CSA B137.6 |
| 3/8" - 2" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ HARVEL CPVC |
ASTM F441 |
| 1/4" - 16" Sch 40 | |||
| 1/4" - 16" Sch 80 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
ASTM F441 |
| 1/4" - 16" Sch 40 | |||
| 1/4" - 16" Sch 80 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ HARVEL BLAZEMASTER® |
ASTM F442 |
| 3/4" - 3" SDR 13.5 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
ASTM F442 |
| 3/4" - 3" SDR 13.5 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
|
SE 8459 |
| 1/4" - 8" Sch 40 | |||
| 1/4" - 8" Sch 80 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe+++ [G] |
CPVC 4120 |
+GF+ Harvel CPVC |
SE 8459 |
| 1/4" - 8" Sch 40 | |||
| 1/4" - 8" Sch 80 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
+GF+ HydroKing Commercial |
ASTM F442 |
| 2 1/2" - 8" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe˘ +++ [G] |
CPVC 4120 |
+GF+ HydroKing Commercial |
CSA B137.6 |
| 2 1/2" - 4" SDR 11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 64
Processing time was 0 seconds