These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=21610&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Barnett, Inc. 
3333 Lenox Avenue
Jacksonville, FL 32254 
United States 
904-384-6530

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement+ [G] PVC PW, DWV, SW Premier All Temperature PVC Cement ASTM D2564
Solvent Cement+++ [G] CPVC PW Premier CPVC Orange Solvent Cement ASTM F493
Solvent Cement+ [G] PVC PW, DWV, SW Premier Hot Stuff Low VOC PVC Cement ASTM D2564
Solvent Cement[G] PVC PW, DWV, SW Premier Low VOC 1 Step Pipe Cement PVC Medium Clear ASTM D2564
Solvent Cement+ [G] PVC PW, DWV, SW Premier Low VOC PVC Regular Cement Clear ASTM D2564
Primer[G] PVC/CPVC PW Premier Low VOC PVC/CPVC Purple Primer ASTM F656
Primer[G] PVC/CPVC PW, DWV, SW Premier Low VOC PVC/CPVC Purple or Clear Primer ASTM F656
Solvent Cement+ [G] PVC PW, DWV, SW Premier PVC HD Clear Solvent Cement ASTM D2564
Solvent Cement+ [G] PVC PW, DWV Premier PVC Medium Cement Clear ASTM D2564
Solvent Cement+ [G] PVC PW, DWV, SW Premier PVC Regular Clear Solvent Cement ASTM D2564
Solvent Cement+ [G] PVC PW, DWV, SW Premier PVC Wet & Dry ASTM D2564
Solvent Cement (1,2,3)* ~ +++ [G] CPVC PW Premier® Yellow Low VOC 1-Step CPVC Cement CSA B137.6
Solvent Cement (1,2,3)* ~ +++ [G] CPVC PW Premier® Yellow Low VOC 1-Step CPVC Cement ASTM F493 

* This cement is yellow color.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
~ Product is authorized to bear the cNSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
    Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On P-68 or P-70 Clear or Purple Primers.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds