These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=22140&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Technologia Hidraulica THC S.A. 
Mar del Sur No 7481
P.O. Box 347-V 
Barrio Industrial Pudahuel 
Pudahuel, Santiago,  
Chile 
56 2 749 1002

Facility : Santiago, Chile

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings¢ § +++ [G]
PLS
Flair-Fit*
ASTM F877

Cap
3/4" (R7861)

Coupling
1/2" p x 1/2" p 1/2" p x 3/4" p (R7845) 3/4" p x 3/4" fpt sw (7849) 3/4" p x 3/4" p (R7846)

Drop Ear Elbow
1/2" p x 1/2"fpt

Elbow
1/2" p x 1/2" p 1/2" p x 3/4" p (R7805) 3/4" p x 3/4" mpt (R7809) 3/4" p x 3/4" p (R7806)

Female Adapter
1/2" p x 1/8" fpt 1/2" p x 3/8" fpt 1/2" p x 1/2" fpt 3/4" p x 3/4" fpt (R7847)

Female Elbow
1/2" p x 1/2" fpt

Male Adapter
1/2" p x 1/2" mpt 1/2" p x 3/8" mpt 3/4" p x 3/8" mpt (R7848) 3/4" p x 3/4" mbsp (R7872)

Male Elbow
1/2" p x 3/8" mpt 1/2" p x 1/2" mpt

Plug
1/2" p 3/4" p (R7864)

Swivel Coupling
1/2" p x 1/2" fbsp 1/2" p x 1/2" fpt sw

Swivel Elbow
1/2" p x 1/2" fbsp 3/4" p x 3/4" fpt (R7807)

Tee
3/4" p x 3/4" p x 3/4" p (R7872) 1/2" p x 1/2" p x 1/8" fpt 1/2" p x 1/2" mpt x 1/2" fpt sw 1/2" mpt x 1/2" mpt x 1/2" p
1/2" p x 1/2" mpt x 1/2" p 1/2" p x 1/2" mpt x 1/2" mpt 1/2" p x 1/2" p x 1/2" fpt sw 1/2" p x 1/2" p x 1/2" mpt
1/2" p x 1/2" p x 1/2" p 1/2" p x 1/2" sw x 1/2" p 3/4" p x 1/2" p x 1/2" p (R7824) 3/4" p x 1/2" p x 3/4" p (R7825)
3/4" p x 3/4" p x 1/2" p (R7826) 

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ § +++ [G]
PLS
Flair-Fit*
CSA B137.5

Cap
3/4" (R7861)

Coupling
1/2" p X 1/2" p 1/2" p x 3/4" p (R7845) 3/4" p x 3/4" fpt sw (7849) 3/4" p x 3/4" p (R7846)

Drop Ear Elbow
1/2" p x 1/2" fpt

Elbow
1/2" p x 1/2" p 1/2" p x 3/4" p (R7805) 3/4" p x 3/4" mpt (R7809) 3/4" p x 3/4" p (R7806)

Female Adapter
1/2" p x 1/8" fpt 1/2" p x 3/8" fpt 1/2" p x 1/2" fpt 3/4" p x 3/4" fpt (R7847)

Female Elbow
1/2" p x 1/2" fpt

Male Adapter
3/4" p x 3/4" mbsp (R7872) 1/2" p x 1/2" mpt 1/2" p x 3/8" mpt 3/4" p x 3/8" mpt (R7848)

Male Elbow
1/2" p x 3/8" mpt 1/2" p x 1/2" mpt

Plug
1/2" p 3/4" p (R7864)

Swivel Coupling
1/2" p x 1/2" fbsp 1/2" p x 1/2" fpt sw 3/4" p x 3/4" fpt (R7807)

Swivel Elbow
3/4" p x 3/4" fpt (R7807) 1/2" p x 1/2" fbsp

Tee
1/2" p x 1/2" p x 1/8" fpt 1/2" p x 1/2" mpt x 1/2" fpt sw 1/2" mpt x 1/2" mpt x 1/2" p 1/2" p x 1/2" mpt x 1/2" p
1/2" p x 1/2" mpt x 1/2" mpt 1/2" p x 1/2" p x 1/2" fpt sw 1/2" p x 1/2" p x 1/2" mpt 1/2" p x 1/2" p x 1/2" p
1/2" p x 1/2" sw x 1/2" p 3/4" p x 1/2" p x 1/2" p (R7824) 3/4" p x 1/2" p x 3/4" p (R7825) 3/4" p x 3/4" p x 1/2" p (R7826)
3/4" p x 3/4" p x 3/4" p (R7872) 

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ § +++ [G]
PLS
New Flair-it*
ASTM F877

Cap
1/2" (36860) 3/4" (36861)

Coupling
1/2" p x 1/2" fbsp (7873) 1/2" p x 1/2" fpt (36841) 1/2" p x 1/2" mpt (36842) 1/2" p x 1/2" p (7840)
1/2" p x 1/2" p (36840) 1/2" p x 1/2" sw (36873) 1/2" p x 3/4" fpt (7856) 1/2" px 3/4" fpt sw (36856)
1/2" p x 3/4" p (7845) 1/2" p x 3/4" p (36845) 3/4" p x 3/4" fpt (7849) 3/4" p x 3/4" fpt (36847)
3/4" p x 3/4" mbsp (36872) 3/4" p x 3/4" mpt (36848) 3/4" p x 3/4" p (7846) 3/4" p x 3/4" p (36846)
3/4" p x 3/4" p (36849)

Elbow
1/2" p x 3/8" mpt (7810) 1/2" p x 3/8" mpt (36810) 1/2" mpt x 1/2" sw (36785) 1/2" p x 1/2" fbsp (7816)
1/2" p x 1/2" fpt (7802) 1/2" p x 1/2" fpt (36802) 1/2" p x 1/2" mpt (7803) 1/2" p x 1/2" mpt (36803)
1/2" p x 1/2" p (7800) 1/2" p x 1/2" p (36800) 1/2" p x 1/2" sw (36816) 1/2" p x 3/4" fpt (7811)
1/2" p x 3/4" p (7805) 1/2" p x 3/4" sw (36811) 3/4" p x 3/4" fpt (7807) 3/4" p x 3/4" mpt (7809)
3/4" p x 3/4" mpt (36809) 3/4" p x 3/4" p (7806) 3/4" p x 3/4" p (36806) 3/4" p x 3/4" sw (36807)

Female Adapter
1/2" p x 1/2" fpt (7841) 3/4" p x 3/4" fpt (7847)

Male Adapter
1/2" p x 1/2" mpt (7842) 3/4" p x 3/4" mbsp (7872) 3/4" p x 3/4" mpt (7848)

Plug
1/2" (36863) 3/4" (36864)

Tee
1/2" p x 1/2" p x 1/8" fpt (7834) 1/2" p x 1/2" p x 1/2" fpt (36834) 1/2" mpt x 1/2" mpt x 1/2" p (7839) 1/2" mpt x 1/2" mpt x 1/2" p (36839)
1/2" mpt x 1/2" sw x 1/2" mpt (7836) 1/2" p x 1/2" mpt x 1/2" mpt (7837) 1/2" p x 1/2" mpt x 1/2" mpt (36837) 1/2" p x 1/2" mpt x 1/2" p (7838)
1/2" p x 1/2" mpt x 1/2" p (36838) 1/2" p x 1/2" p x 1/2" mpt (7822) 1/2" p x 1/2" p x 1/2" mpt (36822) 1/2" p x 1/2" p x 1/2" p (7820)
1/2" p x 1/2" p x 1/2" p (36820) 1/2" p x 1/2" p x 1/2" sw (7821) 1/2" p x 1/2" p x 1/2" sw (36821) 1/2" p x 1/2" sw x 1/2" p (7828)
1/2" p x 1/2" sw x 1/2" p (36828) 3/4" p x 1/2" p x 1/2" p (7824) 3/4" p x 1/2" p x 1/2" p (36824) 3/4" p x 1/2" p x 3/4" p (7825)
3/4" p x 1/2" p x 3/4" p (36825) 3/4" p x 3/4" p x 1/2" p (7826) 3/4" p x 3/4" p x 1/2" p (36826) 3/4" p x 3/4" p x 3/4" p (7827)
3/4" p x 3/4" p x 3/4" p (36827) 

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ § @@ +++ [G]
PLS
New Flair-it*
CSA B137.5

Cap
1/2" (36860) 3/4" (36861)

Coupling
1/2" p x 1/2" fbsp (7873) 1/2" p x 1/2" mpt (36842) 1/2" p x 1/2" p (7840) 1/2" p x 1/2" p (36840)
1/2" p x 1/2" sw (36873) 1/2" p x 3/4" fpt (7856) 1/2" p x 3/4" fpt (36841) 1/2" p x 3/4" fpt sw (36856)
1/2" p x 3/4" p (7845) 1/2" p x 3/4" p (36845) 3/4" p x 3/4" fpt (7849) 3/4" p x 3/4" fpt (36847)
3/4" p x 3/4" mbsp (36872) 3/4" p x 3/4" mpt (36848) 3/4" p x 3/4" p (7846) 3/4" p x 3/4" p (36846)
3/4" p x 3/4" sw (36849)

Elbow
1/2" p x 3/8" mpt (7810) 1/2" p x 3/8" mpt (36810) 1/2" mpt x 1/2" sw (36785) 1/2" p x 1/2" fbsp (7816)
1/2" p x 1/2" fpt (7802) 1/2" p x 1/2" fpt (36802) 1/2" p x 1/2" mpt (7803) 1/2" p x 1/2" mpt (36803)
1/2" p x 1/2" p (7800) 1/2" p x 1/2" p (36800) 1/2" p x 1/2" sw (36816) 1/2" p x 3/4" fpt (7811)
1/2" p x 3/4" p (7805) 1/2" p x 3/4" sw (36811) 3/4" p x 3/4" fpt (7807) 3/4" p x 3/4" mpt (7809)
3/4" p x 3/4" mpt (36809) 3/4" p x 3/4" p (7806) 3/4" p x 3/4" p (36806) 3/4" p x 3/4" sw (36807)

Female Adapters
1/2" p x 1/2" fpt (7841) 3/4" p x 3/4" fpt (7847)

Male Adapters
1/2" p x 1/2" mpt (7842) 3/4" p x 3/4" mbsp (7872) 3/4" p x 3/4" mpt (7848)

Plug
1/2" (36863) 3/4" (36864)

Tee
1/2" p x 1/2" p x 1/8" fpt (7834) 1/2" p x 1/2" p x 1/8" fpt (36834) 1/2" mpt x 1/2" mpt x 1/2" p (7839) 1/2" mpt x 1/2" mpt x 1/2" p (36839)
1/2" mpt x 1/2" sw x 1/2" mpt (7836) 1/2" p x 1/2" mpt x 1/2" mpt (7837) 1/2" p x 1/2" mpt x 1/2" mpt (36837) 1/2" p x 1/2" mpt x 1/2" p (7838)
1/2" p x 1/2" mpt x 1/2" p (36838) 1/2" p x 1/2" p x 1/2" mpt (7822) 1/2" p x 1/2" p x 1/2" mpt (36822) 1/2" p x 1/2" p x 1/2" p (7820)
1/2" p x 1/2" p x 1/2" p (36820) 1/2" p x 1/2" p x 1/2" sw (7821) 1/2" p x 1/2" p x 1/2" sw (36821) 1/2" p x 1/2" sw x 1/2" p (7828)
1/2" p x 1/2" sw x 1/2" p (36828) 3/4" p x 1/2" p x 1/2" p (7824) 3/4" p x 3/4" p x 3/4" p (36824) 3/4" p x 1/2" p x 3/4" p (7825)
3/4" p x 1/2" p x 3/4" p (36825) 3/4" p x 3/4" p x 1/2" p (7826) 3/4" p x 3/4" p x 1/2" p (36826) 3/4" p x 3/4" p x 3/4" p (7827)
3/4" p x 3/4" p x 3/4" p (36827) 

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
@@ Fittings tested as a system using FLEX-PEX tubing manufactured by THC.
   Installation/assembly instructions titled "The Flair-It™ FLEX-PEX™ Plumbing
   System Installation Guide."
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Manifold¢ +++ [G]
PLS
Flair-it Manifolds(PLS)*
ASTM F877
1/2" Manifold Cap (07918)[3]

3/4" Manifold Cap (07919)[3]

1" Manifold Cap (07927)[3]

1" FPT x 3/4" FPT Connector (07920)[3]

1" MPT x 1" FPT Connector (07921)[3]

Two-Port 1" End x 3/4" End with 1/2" Ports (7900)
Four-Port 1" End x 3/4" End with 1/2" Ports (7901) 

[3] These components are part of the manifold kit.

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Manifold¢ +++ [G]
PLS
Flair-it Manifolds(PLS)*
CSA B137.5
1/2" Manifold Cap (07918)[3]

3/4" Manifold Cap (07919)[3]

1" Manifold Cap (07927)[3]

1" FPT x 3/4" FPT Connector (07920)[3]

1" MPT x 1" FPT Connector (07921)[3]

Two-Port 1" End x 3/4" End with 1/2" Ports (7900)
Four-Port 1" End x 3/4" End with 1/2" Ports (7901) 

[3] These components are part of the manifold kit.

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Straight Stop Valve¢ +++ [2] [G]
MLTPL
Flair-It Plus
ASME A112.18.1/CSA B125.1
1/2" p x 1/2" p (7880)
1/2" p x 1/2" fpt sw (7890)
1/2" p x 1/2" fpt sw (7891) 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For use with the Flair-It Two-Port and Four-Port Manifolds (product numbers 7960 and
    7961).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ § +++ [G]
PLS
Flair-It Insert**
ASTM F2159

Barb Coupling
1/2" (28840) 1/2" x 3/8" (28853) 3/4" (28846) 3/4" x 1/2" (28845)

Barb Elbow
1/2" (28800) 1/2" x 1/2" MPT (28803) 1/2" x 3/4" (28805) 3/4" (28806)

Barb Plug
1/2" (28863) 3/4" (28864)

Barb Tee
1/2" (28820) 1/2" x 1/2" x 1/2" MPT (28822) 1/2" x 1/2" SW x 1/2" (28828) 3/4" x 1/2" x 1/2" (28824)
3/4" x 3/4" x 1/2" (28826) 3/4" (28827)

Barb x FPT Swivel Adapter
1/2" (28873) 3/8" x 1/2" (28874)

Barb x FPT Swivel Elbow
1/2" (28816)

Barb x MPT Adapter
3/4" x 1/2" (28857) 1/2" (28842) 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ § +++ [G]
PLS
Flair-It Insert*
CSA B137.5

Barb Coupling
3/4" (28846) 1/2" x 3/8" (28853) 1/2" (28840) 3/4" x 1/2" (28845)

Barb Elbow
1/2" (28800) 1/2" x 1/2" MPT (28803) 1/2" x 3/4" (28805) 3/4" (28806)

Barb Plug
3/4" (28864) 1/2" (28863)

Barb Tee
1/2" (28820) 1/2" x 1/2" x 1/2" MPT (28822) 1/2" x 1/2" SW x 1/2" (28828) 3/4" x 1/2" x 1/2" (28824)
3/4" x 3/4" x 1/2" (28826) 3/4" (28827)

Barb x FPT Swivel Adapter
1/2" (28873) 3/8" x 1/2" (28874)

Barb x FPT Swivel Elbow
1/2" (28816)

Barb x MPT Adapter
3/4" x 1/2" (28857) 1/2" (28842) 

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Straight Stop Valve¢ +++ [G]
MLTPL
Flair-It Insert**
ASME A112.18.1/CSA B125.1
1/2" Barb (28879)
1/2" Barb x 1/2" Swivel (28890) 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ ++ @@ [G]
POM
Flair-it (Line-A)*
SE 7956

Cap
1/2" ftg (6860) 3/4" ftg (6861)

Coupling
1/2" p x 1/2" fpt swivel (6796) 3/4" p x 3/4" fpt swivel (6849) 1/2" p x 1/2" fbsp swivel (6873) 1/2" p x 1/2" p (6840)
1/2" p x 3/4" p (6845) 3/4" p x 3/4" p (6846)

Elbow
1/2" p x 1/2" fpt swivel (6794) 1/2" p x 3/4" fpt swivel (6811) 1/2" p x 1/2" fbsp swivel (6814 and 6816) 1/2" p x 1/2" fpt (6802)
1/2" p x 1/2" fpt drop ear (6801) 3/4" p x 3/4" fpt (6813) 1/2" p x 1/2" mpt (6803) 3/4" p x 1/2" mpt (6808)
3/4" p x 3/4" mpt (6809) 1/2" p x 3/4" mpt (6812) 1/2" p x 1/2" p (6800) 1/2" p x 3/4" p (6805)
3/4" p x 3/4" p (6806) 1/2" mpt x 1/2" swivel (6785)

Female Adapter
1/2" p x 1/2" fpt (6841) 1/2" p x 3/4" fpt (6858) 3/4" p x 3/4" fpt (6847) 1/2" p x 1/8" fpt (6871)

Female Adapter (termination)
1/2" p x 1/2" fpt (6791)

Male Adapter
1/2" p x 1/2" mpt (6842) 3/4" p x 3/4" mpt (6848) 3/4" p x 1/2" mpt (6857) 1/2" p x 3/4" mpt (6868)
3/4" p x 3/4" mbsp (6872)

Plug
1/2" p (6863) 3/4" p (6864)

Tee
1/2" p x 1/2" p x 1/2" fpt swivel (6821) 1/2" p x 1/2" p x 3/4" fpt swivel (6829) 1/2" p x 1/2" p x 1/8" fpt (6834) 1/2" p x 1/2" mpt x 1/2" mpt (6837)
1/2" p x 1/2" mpt x 1/2" p (6838) 1/2" mpt x 1/2" mpt x 1/2" p (6839) 1/2" p x 1/2" p x 1/2" mpt (6822) 3/4" p x 3/4" p x 1/2" mpt (6832)
1/2" mbsp x 1/2" fbsp x 1/2" mbsp (6836) 1/2" p x 1/2" p x 1/2" p (6820) 1/2" p x 1/2" p x 3/4" p (6823) 3/4" p x 1/2" p x 1/2" p (6824)
3/4" p x 1/2" p x 3/4" p (6825) 3/4" p x 3/4" p x 1/2" p (6826) 3/4" p x 3/4" p x 3/4" p (6827) 1/2" p x 1/2" mpt x 1/2" fpt swivel (6819)
1/2" p x 1/2" fpt swivel x 1/2" p(6828) 

* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
@@ Fittings tested as a system using FLEX-PEX tubing manufactured by THC.
   Installation/assembly instructions titled "The Flair-It™ FLEX-PEX™ Plumbing
   System Installation Guide."
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Valves# ¢ ++ [G]
POM
Flair-it (Line-A)*
ASME A112.18.1/CSA B125.1

3-Way Valve "T" port
3/8" p x 3/8" p x 3/8" p (6900) 1/2" p x 1/2" p x 1/2" p (6910) 1/2" p x 1/2" mpt x 1/2" p (6912) 1/2" swivel x 1/2" p x 1/2 p (6913)

3-Way Valve 180°
3/8" p x 3/8" p x 3/8" p (6902) 1/2" p x 1/2" p x 1/2" p (6914) 1/2" p x 1/2" p x 1/2" mbsp (6915) 1/2" fbsp x 1/2" mbsp x 1/2" mbsp (6916 and 6917)

Angle Valve
3/8" p x 3/8" p (6883) 1/2" p x 1/2" p (6885) 1/2" p x F Nut (6888) 1/2" p x 3/8" compression (6893)

Drain Angle Valve
3/8" p x 3/8" p (6882) 1/2" p x 1/2" p (6884)

Straight Stop Valve
3/8" p x 3/8" p (6879) 1/2" p x 1/2" p (6880) 1/2" p x F Nut (6881) 1/2" p x 1/2" mpt (6889)
1/2" p x 3/8" compression (6892) 

# Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
* These products are also represented by the trade name: THC.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Three Way Valve¢ +++ [G]
MLTPL
Flair-It Insert**
ASME A112.18.1/CSA B125.1
1/2" (28910) 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


[1] Certified THC Flair-Pex tubing is white in color.
Number of matching Manufacturers is 1
Number of matching Products is 354
Processing time was 1 seconds