These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=23500&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Pacific Plastics, Inc. 
111 South Berry Street
Brea, CA 92821 
United States 
714-990-9050

Facility : Brea, CA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ § [1] [G]
PVC 1120
Solar Proof
ASTM D1785
1/2" - 6" Sch 40 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
    production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ § [1] [G]
PVC 1120
Pacific Plastics
ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
    production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ § [1] [G]
PVC 1120
Pacific Plastics
ASTM D2241
3/4" - 12" SDR 21
1/2" - 6" SDR 13.5
1 1/4" - 12" SDR 26
1 1/4" - 12" SDR 32.5
3" - 12" SDR 41 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
    production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds