These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=23850&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Interstate Plastics, Inc. | |
| P.O. Box 398 | |
| Post Falls, ID 83854 | |
| United States | |
| 208-773-4538 |
Facility : Post Falls, ID
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe$ + [G] |
PE 3608, PE 4710 |
INTERSTATE |
ASTM D2239 |
| 3/4" - 2" SIDR 7 | |||
| 3/4" - 2" SIDR 9 | |||
| 1/2" - 2" SIDR 11.5 | |||
| 3/4" - 2" SIDR 15 | |||
| 3/4" - 2" SIDR 19 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + [G] |
PE 3608, PE 4710 |
INTERSTATE |
ASTM D3035 |
| 3/4" - 2" DR 7 | |||
| 3/4" - 3" DR 9 | |||
| 3/4" - 3" DR 11 | |||
| 3/4" - 3" DR 13.5 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + [G] |
PE 3608, PE 4710 |
INTERSTATE |
ASTM D2737 |
| 3/4" - 2" SDR 9 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + ¢ [G] |
PE 3608, PE 4710 |
INTERSTATE |
CSA B137.1 |
|
3/4" - 2" |
|||
| Series 80 | Series 100 | Series 125 | Series 160 |
| Series 200 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + [G] |
PE 3608, PE 4710 |
Interstate Super Service Blue |
ASTM D2239 |
| 3/4" - 2" SIDR 7 | |||
| 3/4" - 2" SIDR 9 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + [G] |
PE 3608, PE 4710 |
Interstate Super Service Blue |
ASTM D3035 |
| 3/4" - 2" DR 9 | |||
| 3/4" - 2" DR 11 | |||
| 3/4" - 3" DR 13.5 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + [G] |
PE 3608, PE 4710 |
Interstate Super Service Blue |
ASTM D2737 |
| 3/4" - 2" SDR 9 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe$ + ¢ [G] |
PE 3608, PE 4710 |
Interstate Super Service Blue |
CSA B137.1 |
|
3/4" - 2" |
|||
| Series 80 | Series 100 | Series 125 | Series 160 |
| Series 200 | |||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 26
Processing time was 0 seconds