These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=25102&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| J-M Manufacturing Co., Inc. |  |
| 9 Peach Tree Hill Road | |
| Livingston, NJ 07039 | |
| United States | |
| 310-693-8200 | |
| Visit this company's website |
Facility : # 1 Adel, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D2737 |
| 1/2" - 2" SDR 9 | |||
| 1/2" - 2" SDR 11 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM F714 |
| 3" - 18" SDR 7.3 | |||
| 3" - 20" SDR 8.3 | |||
| 3" - 24" SDR 9 | |||
| 3" - 30" SDR 9.3 | |||
| 3" - 36" SDR 11 | |||
| 3" - 36" SDR 13.5 | |||
| 3" - 48" SDR 15.5 | |||
| 3" - 54" SDR 17 | |||
| 3" - 54" SDR 21 | |||
| 3" - 54" SDR 26 | |||
| 3" - 63" SIDR 32.5 | |||
| 3" - 63" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D2239 |
| 1/2" - 6" SIDR 5.3 | |||
| 1/2" - 6" SIDR 7 | |||
| 1/2" - 6" SIDR 9 | |||
| 1/2" - 6" SIDR 11.5 | |||
| 1/2" - 6" SIDR 15 | |||
| 1/2" - 6" SIDR 19 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D3035 |
| 1/2" - 24" DR 7 | |||
| 1/2" - 24" DR 9 | |||
| 1/2" - 24" DR 9.3 | |||
| 1/2" - 24" DR 11 | |||
| 1/2" - 24" DR 13.5 | |||
| 1/2" - 24" DR 15.5 | |||
| 1/2" - 24" DR 17 | |||
| 1/2" - 24" DR 21 | |||
| 1/2" - 24" DR 26 | |||
| 1/2" - 24" DR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
AWWA C901 |
| 1/2" - 3" SDR 9 | |||
| 1/2" - 3" SDR 11 | |||
| 1/2" - 3" SDR 13.5 | |||
| 1/2" - 3" SDR 17 | |||
| 1/2" - 3" SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + [G] |
PE 3408 |
J-M Manufacturing |
AWWA C906 |
| 4" - 63" SDR 7.3 | |||
| 4" - 63" SDR 9 | |||
| 4" - 63" SDR 9.3 | |||
| 4" - 63" SDR 11 | |||
| 4" - 63" SDR 13.5 | |||
| 4" - 63" SDR 15.5 | |||
| 4" - 63" SDR 17 | |||
| 4" - 63" SDR 21 | |||
| 4" - 63" SDR 26 | |||
| 4" - 63" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 2 Batchelor, LA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 6" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# § [G] |
PVC 1120 IC-0 |
J-M Manufacturing |
ASTM F480 |
| 2" Sch 40 | |||
| 4" Sch 40 | |||
| 6" Sch 40 | |||
| 8" Sch 40 | |||
| 10" Sch 40 | |||
| 12" Sch 40 | |||
| 4" - 12" SDR 17 | |||
| 4" - 12" SDR 21 | |||
| 4" - 12" SDR 26 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 3 Butner, NC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1" - 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 6 Fontana, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
| 3" - 12" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 7 Hastings, NE
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PVC 1120 |
Eagle |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
| 3/4" - 4" Sch 120 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Eagle |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
| 3/4" - 4" Sch 120 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Pipe |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
| 3/4" - 4" Sch 120 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
Baron |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
| 3/4" - 4" Sch 120 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Pipe Baron |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
| 3/4" - 4" Sch 120 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
Solar-Blok |
ASTM D1785 |
| 1/2" - 4" Sch 40 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Eagle Solar-Blok |
ASTM D1785 |
| 1/2" - 4" Sch 40 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Pipe Solar-Blok |
ASTM D1785 |
| 1/2" - 4" Sch 40 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
Eagle |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 8" SDR 17 | |||
| 3/4" - 8" SDR 21 | |||
| 1 1/4" - 8" SDR 26 | |||
| 1 1/4" - 8" SDR | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Pipe |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 8" SDR 17 | |||
| 3/4" - 8" SDR 21 | |||
| 1 1/4" - 8" SDR 26 | |||
| 1 1/4" - 8" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Eagle |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 8" SDR 17 | |||
| 3/4" - 8" SDR 21 | |||
| 1 1/4" - 8" SDR 26 | |||
| 1 1/4" - 8" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
Baron |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 8" SDR 17 | |||
| 3/4" - 8" SDR 21 | |||
| 1 1/4" - 8" SDR 26 | |||
| 1 1/4" - 8" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Pipe Baron |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 8" SDR 17 | |||
| 3/4" - 8" SDR 21 | |||
| 1 1/4" - 8" SDR 26 | |||
| 1 1/4" - 8" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
Solar-Bloc |
ASTM D2241 |
| 1/2" - 4" SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Pipe Solar-Bloc |
ASTM D2241 |
| 1/2" - 4" SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PVC 1120 |
PW Eagle |
ASTM D2241 |
| 1/2" - 4" SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing# § [G] |
PVC 1120 IC-0 |
Eagle Well Casing |
ASTM F480 |
| 2" - 8" Sch 40 | |||
| 2" - 8" Sch 40 | |||
| 2" - 8" SDR 17 | |||
| 2" - 8" SDR 21 | |||
| 2" - 8" SDR 26 | |||
| 4 1/2" SDR 32.5 | |||
| 6 1/4" SDR 27.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casing# § [G] |
PVC 1120 IC-0 |
PW Pipe Well Casing |
ASTM F480 |
| 2" - 8" Sch 40 | |||
| 2" - 8" Sch 80 | |||
| 2" - 8" SDR 17 | |||
| 2" - 8" SDR 21 | |||
| 2" - 8" SDR 26 | |||
| 4 1/2" SDR 32.5 | |||
| 6 1/4" SDR 27.6 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casing# § [G] |
PVC 1120 IC-0 |
Baron |
ASTM F480 |
| 2" - 8" Sch 40 | |||
| 2" - 8" Sch 80 | |||
| 2" - 8" SDR 17 | |||
| 2" - 8" SDR 21 | |||
| 2" - 8" SDR 26 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# § [G] |
PVC 1120 IC-0 |
PW Pipe Baron |
ASTM F480 |
| 2" - 8" Sch 40 | |||
| 2" - 8" Sch 80 | |||
| 2" - 8" SDR 17 | |||
| 2" - 8" SDR 21 | |||
| 2" - 8" SDR 26 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 8 Kingman, AZ
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D2737 |
| 1/2" - 2" CTS SDR 9 | |||
| 1/2" - 2" CTS SDR 11 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D2239 |
| 1/2" - 6" SIDR 5.3 | |||
| 1/2" - 6" SIDR 7 | |||
| 1/2" - 6" SIDR 9 | |||
| 1/2" - 6" SIDR 11.5 | |||
| 1/2" - 6" SIDR 15 | |||
| 1/2" - 6" SIDR 15 | |||
| 1/2" - 6" SIDR 19 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D3035 |
| 1/2" - 24" SDR 7 | |||
| 1/2" - 24" SDR 9 | |||
| 1/2" - 24" SDR 9.3 | |||
| 1/2" - 24" SDR 11 | |||
| 1/2" - 24" SDR 13.5 | |||
| 1/2" - 24" SDR 15.5 | |||
| 1/2" - 24" SDR 17 | |||
| 1/2" - 24" SDR 21 | |||
| 1/2" - 24" SDR 26 | |||
| 1/2" - 24" SIDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM F714 |
| 3" - 18" SDR 7.3 | |||
| 3" - 20" SDR 8.3 | |||
| 3" - 24" SDR 9 | |||
| 3" - 30" SDR 9.3 | |||
| 3" - 36" SDR 11 | |||
| 3" - 36" SDR 13.5 | |||
| 3" - 48" SDR 15.5 | |||
| 3" - 54" SDR 17 | |||
| 3" - 54" SDR 21 | |||
| 3" - 54" SDR 26 | |||
| 3" - 63" SDR 32.5 | |||
| 3" - 63" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 9 Magnolia, AR
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D2737 |
| 1/2" - 2" CTS SDR 9 | |||
| 1/2" - 2" CTS SDR 11 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D2239 |
| 1/2" - 6" SIDR 5.3 | |||
| 1/2" - 6" SIDR 7 | |||
| 1/2" - 6" SIDR 9 | |||
| 1/2" - 6" SIDR 11.5 | |||
| 1/2" - 6" SIDR 15 | |||
| 1/2" - 6" SIDR 19 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM D3035 |
| 1/2" - 24" SDR 7 | |||
| 1/2" - 24" SDR 9 | |||
| 1/2" - 24" SDR 9.3 | |||
| 1/2" - 24" SDR 11 | |||
| 1/2" - 24" SDR 13.5 | |||
| 1/2" - 24" SDR 15.5 | |||
| 1/2" - 24" SDR 17 | |||
| 1/2" - 24" SDR 21 | |||
| 1/2" - 24" SDR 26 | |||
| 1/2" - 24" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Manufacturing |
ASTM F714 |
| 3" - 36" SDR 7.3 | |||
| 3" - 36" SDR 8.3 | |||
| 3" - 36" SDR 9 | |||
| 3" - 36" SDR 9.3 | |||
| 3" - 36" SDR 11 | |||
| 3" - 36" SDR 13.5 | |||
| 3" - 36" SDR 15.5 | |||
| 3" - 36" SDR 17 | |||
| 3" - 36" SDR 21 | |||
| 3" - 36" SDR 26 | |||
| 3" - 36" SDR 32.5 | |||
| 3" - 36" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# % * § +++ [G] |
PEX 5006 |
J-M Manufacturing EverPEX |
ASTM F876/F877 |
| 1/8" - 6" | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
% Blue/natural/red/white
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Pipe# % * ¢ +++ [G] |
PEX 5006 |
J-M Manufacturing EverPEX |
CSA B137.5 |
| 1/8" - 6" | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
% Blue/natural/red/white
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
^ Meets the Chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 10 Umatilla, OR
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested for Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
| 3" - 12" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested for Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing# + § [G] |
PVC 1120 IC-0 |
J-M Manufacturing |
ASTM F480 |
| 2" Sch 40 | |||
| 4" Sch 40 | |||
| 6" Sch 40 | |||
| 8" Sch 40 | |||
| 10" Sch 40 | |||
| 12" Sch 40 | |||
| 4" SDR 17 | |||
| 4.5" SDR 17 | |||
| 5" SDR 17 | |||
| 6" SDR 17 | |||
| 8" SDR 17 | |||
| 10" SDR 17 | |||
| 12" SDR 17 | |||
| 4" SDR 21 | |||
| 4.5" SDR 21 | |||
| 5" SDR 21 | |||
| 6" SDR 21 | |||
| 8" SDR 21 | |||
| 10" SDR 21 | |||
| 12" SDR 21 | |||
| 4" SDR 26 | |||
| 4.5" SDR 26 | |||
| 5" SDR 26 | |||
| 6" SDR 26 | |||
| 8" SDR 26 | |||
| 10" SDR 26 | |||
| 12" SDR 26 | |||
| 4" SDR 32.5 | |||
| 5" SDR 32.5 | |||
| 6" SDR 32.5 | |||
| 8" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 11 Cochranton, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# $ + § [G] |
PE 3408 / PE 3608 |
J-M Manufacturing |
AWWA C906 |
| 4" - 30" DIPS SDR 13.5 | |||
| 4" - 30" DIPS SDR 17 | |||
| 4" - 30" DIPS SDR 19 | |||
| 4" - 30" DIPS SDR 11 | |||
| 4" - 30" DIPS SDR 21 | |||
| 4" - 24" IPS SDR 7 | |||
| 4" - 24" IPS SDR 9 | |||
| 4" - 24" IPS SDR 19 | |||
| 4" - 30" DIPS SDR 9 | |||
| 4" - 36" IPS SDR 11 | |||
| 4" - 36" IPS SDR 13.5 | |||
| 4" - 36" IPS SDR 17 | |||
| 4" - 36" IPS SDR 21 | |||
| 4" - 36" IPS SDR 26 | |||
| 4" - 36" IPS SDR 32.5 | |||
| 26" - 36" IPS SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# $ + § [G] |
PE 3408 / PE 4710 |
J-M Manufacturing |
AWWA C906 |
| 4" - 24" IPS SDR 7 | |||
| 4" - 24" IPS SDR 9 | |||
| 4" - 24" IPS SDR 19 | |||
| 4" - 30" DIPS SDR 9 | |||
| 4" - 30" DIPS SDR 11 | |||
| 4" - 30" DIPS SDR 13.5 | |||
| 4" - 30" DIPS SDR 17 | |||
| 4" - 30" DIPS SDR 19 | |||
| 4" - 30" DIPS SDR 21 | |||
| 4" - 36" IPS SDR 11 | |||
| 4" - 36" IPS SDR 13.5 | |||
| 4" - 36" IPS SDR 17 | |||
| 4" - 36" IPS SDR 21 | |||
| 4" - 36" IPS SDR 26 | |||
| 4" - 36" IPS SDR 32.5 | |||
| 26" - 36" IPS SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
ASTM F714 |
| 1/2" - 24" IPS SDR 9 | |||
| 1/2" - 36" IPS SDR 11 | |||
| 1/2" - 36" IPS SDR 13.5 | |||
| 1/2" - 36" IPS SDR 17 | |||
| 4" - 24" IPS SDR 7 | |||
| 4" - 24" IPS SDR 19 | |||
| 4" - 30" DIPS SDR 9 | |||
| 4" - 30" DIPS SDR 11 | |||
| 4" - 30" DIPS SDR 13.5 | |||
| 4" - 30" DIPS SDR 17 | |||
| 4" - 30" DIPS SDR 19 | |||
| 4" - 30" DIPS SDR 21 | |||
| 4" - 36" IPS SDR 21 | |||
| 4" - 36" IPS SDR 26 | |||
| 4" - 36" IPS SDR 32.5 | |||
| 26" - 36" IPS SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
ASTM D2737 |
| 3/4" - 2" CTS SDR 9 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
ASTM D3035 |
| 1/2" - 3" IPS SDR 9 | |||
| 1/2" - 3" IPS SDR 11 | |||
| 1/2" - 3" IPS SDR 13.5 | |||
| 1/2" - 3" IPS SDR 17 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
AWWA C901 |
| 1/2" - 3" IPS SDR 9 | |||
| 1/2" - 3" IPS SDR 11 | |||
| 1/2" - 3" IPS SDR 13.5 | |||
| 1/2" - 3" IPS SDR 17 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 6" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PVC 1120 IC-0 |
J-M Manufacturing |
ASTM F480 |
| 2" Sch 40 | |||
| 4" Sch 40 | |||
| 6" Sch 40 | |||
| 8" Sch 40 | |||
| 10" Sch 40 | |||
| 12" Sch 40 | |||
| 4" SDR 17 | |||
| 4.5" SDR 17 | |||
| 5" SDR 17 | |||
| 6" SDR 17 | |||
| 8" SDR 17 | |||
| 10" SDR 17 | |||
| 12" SDR 17 | |||
| 4" SDR 21 | |||
| 4.5" SDR 21 | |||
| 5" SDR 21 | |||
| 6" SDR 21 | |||
| 8" SDR 21 | |||
| 10" SDR 21 | |||
| 12" SDR 21 | |||
| 4" SDR 26 | |||
| 4.5" SDR 26 | |||
| 5" SDR 26 | |||
| 6" SDR 26 | |||
| 8" SDR 26 | |||
| 10" SDR 26 | |||
| 12" SDR 26 | |||
| 4" SDR 32.5 | |||
| 4.5" SDR 32.5 | |||
| 5" SDR 32.5 | |||
| 6" SDR 32.5 | |||
| 8" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 12 Perris, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" – 12" Sch 40 | |||
| 1/2" – 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 13 Pueblo, CO
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1/2" - 8" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 14 Stockton, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# § [G] |
PVC 1120 IC-0 |
J-M Manufacturing |
ASTM F480 |
| 2" Sch 40 | |||
| 4" Sch 40 | |||
| 6" Sch 40 | |||
| 8" Sch 40 | |||
| 10" Sch 40 | |||
| 12" Sch 40 | |||
| 4" - 12" SDR 17 | |||
| 4" - 12" SDR 21 | |||
| 4" - 12" SDR 26 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing, and/or PW Eagle, and/or [JMM Logo], and/or JM Eagle, and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 15 Sunnyside, WA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
ASTM D2737 |
| 3/4" - 2" CTS SDR 9 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
ASTM F714 |
| 4" - 24" IPS SDR 7 | |||
| 1/2" - 24" IPS SDR 9 | |||
| 1/2" - 36" IPS SDR 11 | |||
| 1/2" - 36" IPS SDR 13.5 | |||
| 1/2" - 36" IPS SDR 17 | |||
| 4" - 24" IPS SDR 19 | |||
| 4" - 36" IPS SDR 21 | |||
| 4" - 36" IPS SDR 26 | |||
| 4" - 36" IPS SDR 32.5 | |||
| 26" - 36" IPS SDR 41 | |||
| 4" - 30" DIPS SDR 9 | |||
| 4" - 30" DIPS SDR 11 | |||
| 4" - 30" DIPS SDR 13.5 | |||
| 4" - 30" DIPS SDR 17 | |||
| 4" - 30" DIPS SDR 19 | |||
| 4" - 30" DIPS SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
ASTM D3035 |
| 1/2" - 3" IPS SDR 9 | |||
| 1/2" - 3" IPS SDR 11 | |||
| 1/2" - 3" IPS SDR 13.5 | |||
| 1/2" - 3" IPS SDR 17 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe # + § [G]# + § [G] |
PE 3608, PE 4710 |
J-M Manufacturing |
AWWA C901 |
| 1/2" - 3" IPS SDR 9 | |||
| 1/2" - 3" IPS SDR 11 | |||
| 1/2" - 3" IPS SDR 13.5 | |||
| 1/2" - 3" IPS SDR 17 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# $ + § [G] |
PE 3408/PE 3608 |
J-M Manufacturing |
AWWA C906 |
| 4" - 24" IPS SDR 7 | |||
| 4" - 24" IPS SDR 9 | |||
| 4" - 36" IPS SDR 11 | |||
| 4" - 36" IPS SDR 13.5 | |||
| 4" - 36" IPS SDR 17 | |||
| 4" - 24" IPS SDR 19 | |||
| 4" - 36" IPS SDR 21 | |||
| 4" - 36" IPS SDR 26 | |||
| 4" - 36" IPS SDR 32.5 | |||
| 26" - 36" IPS SDR 41 | |||
| 4" - 30" DIPS SDR 9 | |||
| 4" - 30" DIPS SDR 11 | |||
| 4" - 30" DIPS SDR 13.5 | |||
| 4" - 30" DIPS SDR 17 | |||
| 4" - 30" DIPS SDR 19 | |||
| 4" - 30" DIPS SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# $ + § [G] |
PE 3408/PE 4710 |
J-M Manufacturing |
AWWA C906 |
| 4" - 24" IPS SDR 7 | |||
| 4" - 24" IPS SDR 9 | |||
| 4" - 36" IPS SDR 11 | |||
| 4" - 36" IPS SDR 13.5 | |||
| 4" - 36" IPS SDR 17 | |||
| 4" - 24" IPS SDR 19 | |||
| 4" - 36" IPS SDR 21 | |||
| 4" - 36" IPS SDR 26 | |||
| 4" - 36" IPS SDR 32.5 | |||
| 26" - 36" IPS SDR 41 | |||
| 4" - 30" DIPS SDR 9 | |||
| 4" - 30" DIPS SDR 11 | |||
| 4" - 30" DIPS SDR 13.5 | |||
| 4" - 30" DIPS SDR 17 | |||
| 4" - 30" DIPS SDR 19 | |||
| 4" - 30" DIPS SDR 21 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : # 17 Tulsa, OK
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PE 3408 |
J-M Eagle |
ASTM D2737 |
| 1/2" - 2" CTS SDR 9 | |||
| 1/2" - 2" CTS SDR 11 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Eagle |
ASTM D2239 |
| 1/2" - 6" SIDR 5.3 | |||
| 1/2" - 6" SIDR 7 | |||
| 1/2" - 6" SIDR 9 | |||
| 1/2" - 6" SIDR 11.5 | |||
| 1/2" - 6" SIDR 15 | |||
| 1/2" - 6" SIDR 15 | |||
| 1/2" - 6" SIDR 19 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Eagle |
ASTM D3035 |
| 1/2" - 24" SDR 7 | |||
| 1/2" - 24" SDR 9 | |||
| 1/2" - 24" SDR 9.3 | |||
| 1/2" - 24" SDR 11 | |||
| 1/2" - 24" SDR 13.5 | |||
| 1/2" - 24" SDR 15.5 | |||
| 1/2" - 24" SDR 17 | |||
| 1/2" - 24" SDR 21 | |||
| 1/2" - 24" SDR 26 | |||
| 1/2" - 24" SIDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# + § [G] |
PE 3408 |
J-M Eagle |
ASTM F714 |
| 3" - 36" SDR 7.3 | |||
| 3" - 36" SDR 8.3 | |||
| 3" - 36" SDR 9 | |||
| 3" - 36" SDR 9.3 | |||
| 3" - 36" SDR 11 | |||
| 3" - 36" SDR 13.5 | |||
| 3" - 36" SDR 15.5 | |||
| 3" - 36" SDR 17 | |||
| 3" - 36" SDR 21 | |||
| 3" - 36" SDR 26 | |||
| 3" - 36" SDR 32.5 | |||
| 3" - 36" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 18 Visalia, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" – 12" Sch 40 | |||
| 1/2" – 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 19 Wharton, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1" - 12" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 20 Wilton, IA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D1785 |
| 1/2" - 8" Sch 40 | |||
| 1" - 8" Sch 80 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# * + § [G] |
PVC 1120 |
J-M Manufacturing |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 3/4" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1" - 12" SDR 26 | |||
| 1 1/4" - 12" SDR 32.5 | |||
| 3" - 12" SDR 41 | |||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 476
Processing time was 0 seconds