These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=27450&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Lasco Fittings, Inc. | |
| P.O. Box 116 | |
| Brownsville, TN 38012 | |
| United States | |
| 731-772-3180 | |
| Visit this company's website |
Facility : Brownsville, TN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+++ [1] [G] |
CPVC |
LASCO CPVC Fittings |
ASTM F439 |
|
45° Ell (S) |
|||
| 1/4" - 8" (9817-xxx) | |||
|
45° Ell (T) |
|||
| 3/8" - 2" (9819-xxx) | |||
|
90° Ell (S) |
|||
| 1/4" - 8" (9806-xxx) | |||
|
90° Ell (SxT) |
|||
| 1/2" - 2" (9807-xxx) | |||
|
90° Ell (T) |
|||
| 3/8" - 2" (9808-xxx) | |||
|
Bushing (S) |
|||
| 1/4" - 8" (9837-xxx) | |||
|
Bushing (SxT) |
|||
| 1/4" - 4" (9838-xxx) | |||
|
Bushing (T) |
|||
| 1/2" - 4" (9839-xxx) | |||
|
Cap (S) |
|||
| 1/2" - 6" (9847-xxx) | |||
|
Cap (T) |
|||
| 3/8" - 4" (9848-xxx) | |||
|
Coupling (S) |
|||
| 1/4" - 8" (9829-xxx) | |||
|
Coupling (T) |
|||
| 3/8" - 2" (9830-xxx) | |||
|
Female Adapter |
|||
| 1/4" - 4" (9835-xxx) | |||
|
Male Adapter |
|||
| 1/2" - 4" (9836-xxx) | |||
|
Plug (T) |
|||
| 1/4" - 4" (9850-xxx) | |||
|
Tee (S) |
|||
| 1/2" - 8" (9801-xxx) | |||
|
Tee (SST) |
|||
| 1/2" - 1" (9802-xxx) | |||
|
Tee (T) |
|||
| 3/8" - 4" (9805-xxx) | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] xxx designates the following sizes:
002 - 1/4"
003 - 3/8"
005 - 1/2"
007 - 3/4"
010 - 1"
012 - 1 1/4"
015 - 1 1/2"
020 - 2"
025 - 2 1/2"
030 - 3"
040 - 4"
052 - 3/8" x 1/4"
060 - 6"
072 - 1/2" x 1/4"
073 - 1/2" x 3/8"
080 - 8"
101 - 3/4" x 1/2"
130 - 1" x 1/2"
131 - 1" x 3/4"
166 - 1 1/4" x 1/2"
167 - 1 1/4" x 3/4"
168 - 1 1/2" x 1"
209 - 1 1/2" x 1/2"
210 - 1 1/2" x 3/4"
211 - 1 1/2" x 1"
212 - 1 1/2" x 1 1/4"
247 - 2" x 1/2"
248 - 2" x 3/4"
249 - 2" x 1"
250 - 2" x 1 1/4"
251 - 2" x 1 1/2"
289 - 2 1/2" x 1"
291 - 2 1/2" x 1 1/2"
292 - 2 1/2" x 2"
334 - 3" x 3" x 3/4"
335 - 3" x 3" x 1"
337 - 3" x 1 1/2"
338 - 3" x 2"
339 - 3" x 2 1/2"
420 - 4" x 2"
421 - 4" x 2 1/2"
422 - 4" x 3"
532 - 6" x 4"
585 - 8" x 6"
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings§ +++ [2] [G] |
CPVC |
LASCO Copper Tube Size CPVC Fittings |
ASTM D2846 |
|
CTS 45° Ell (S x S) |
|||
| 1/2" - 2" (4117-xxx) | |||
|
CTS 5° Ell (S x Sp) |
|||
| 1/2" - 1" (4127-xxx) | |||
|
CTS Bushing |
|||
| 1/2" - 2" (4137-xxx) | |||
|
CTS Cap |
|||
| 1/2" - 2" (4147-xxx) | |||
|
CTS Coupling |
|||
| 1/2" - 2" (4129-xxx) | |||
|
CTS Male Adapter |
|||
| 1/2" - 2" (4136-xxx) | |||
|
CTS Reducer Coupling |
|||
| 1/2" - 1" (4129-xxx) | |||
|
CTS Reducing Ell |
|||
| 3/4" x 1/2" (4106-xxx) | |||
|
CTS Street Adapter |
|||
| 1/2" ( 4161-xxx) | |||
|
CTS Street Ell (H x S) |
|||
| 1/2" - 1" (4109-xxx) | |||
|
CTS Sweep Ell |
|||
| 1/2" - 2" (4106-xxx) | |||
|
CTS Tee |
|||
| 1/2" - 2" (4101-xxx) | |||
|
IPS x CTS Transition Bushing |
|||
| 1/2" - 2" (4140-xxx) | |||
|
IPS x CTS Transition Coupling |
|||
| 3/4" - 1" (4141-xxx) | |||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] XXX designates the following sizes:
005 - 1/2"
007 - 3/4"
010 - 1"
012 - 1 1/4"
015 - 1 1/2"
020 - 2"
094 - 3/4" x 1/2"x 1/2"
101 - 3/4" x 1/2"
130 - 1" x 1/2"
131 - 1" x 3/4"
166 - 1 1/4" x 1/2"
167 - 1 1/4" x 3/4"
168 - 1 1/4" x 1"
209 - 1 1/2" x 1/2"
210 - 1 1/2" x 3/4"
211 - 1 1/2" x 1"
212 - 1 1/2" x 1 1/4"
247 - 2" x 1/2"
248 - 2" x 3/4"
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+ [G] |
PVC I-G1 |
LASCO |
ASTM D2467 |
|
30° Ell (SLIP x SLIP) |
|||
| 6" | |||
|
45° Ell (SLIP x SLIP) |
|||
| 1/2" - 12" | |||
|
90° Ell (SLIP x FIPT) |
|||
| 1/2" - 2" | |||
|
90° Ell (SLIP x SLIP) |
|||
| 1/4" - 12" | |||
|
Cap (SLIP) |
|||
| 1/4" - 12" | |||
|
Coupling (SLIP x SLIP) |
|||
| 1/4" - 12" | |||
|
Female Adapter (SLIP x FIPT) |
|||
| 1/2" - 4" | |||
|
Male Adapter (MIPT x SLIP) |
|||
| 1/2" - 4" | |||
|
Reducer Bushing (SPIGOT x SLIP) |
|||
| 3/8" x 1/4" | 1/2" x 1/4" | 1/2" x 3/8" | 3/4" x 1/2" |
| 1" x 1/2" | 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" |
| 2 1/2" x 1 1/2" | 2 1/2" x 2" | 1" x 3/4" | 1 1/4" x 1/2" |
| 1 1/4" x 3/4" | 1 1/4" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4" |
| 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 3/4" | 3" x 1" |
| 3" x 1 1/4" | 3" x 1 1/2" | 3" x 2" | 3" x 2 1/2" |
| 4" x 2" | 4" x 3" | 6" x 4" | 8" x 6" |
| 10" x 6" | 10" x 8" | 12" x 8" | 12 x 10" |
|
Tee (SLIP x SLIP x FIPT) |
|||
| 1" | 1 1/4" | 2" | 1 1/2" |
| 2" x 2" x 1 1/2" | |||
|
Tee (SLIP x SLIP x SLIP) |
|||
| 1/4" - 8" | 3/4" x 3/4" x 1/2" | 1" x 1" x 1/2" | 1" x 1" x 3/4" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 2" x 2" x 1/2" | 2" x 2" x 3/4" |
| 2" x 2" x 1" | 2"x 2" x 1 1/2" | 3" x 3" x 2" | 4" x 4" x 2" |
| 4" x 4" x 3" | 6" x 6" x 3" | 6" x 6" x 4" | 10" x 10" x 10" |
| 12" x 12" x 12" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC I-G1 |
LASCO |
ASTM D2464 |
|
45° Ell (FIPT x FIPT) |
|||
| 1/2" - 4" | |||
|
90° Ell (FIPT x FIPT) |
|||
| 1/4" - 4" | |||
|
Cap (FIPT) |
|||
| 1/4" - 4" | |||
|
Coupling (FIPT x FIPT) |
|||
| 1/4" - 4" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| ½" x 1 1/8" - 24" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 1/2" - 4" | 1/2" - 1 1/8" - 24" | ||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 3/4" x 1 3/8" - 24" | 1" x 1½" - 24" | ||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 3/4" - 1 3/8" - 24" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 1¼" x 1 5/8" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 1" - 1½" - 24" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 1½" x 1 3/4" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 1¼" - 1 5/8" - 6" | 2" x 2" - 12" | ||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 2" x 2" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 2½" x 2½" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 2½" x 2½" - 12" | 2½" x 12" | ||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 3" x 2 5/8" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 3" x 2 5/8" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 4" x 2 7/8" - 12" | |||
|
Diameter x Min. Length thru (-) Max. Length |
|||
| 4" x 2 7/8" - 12" | |||
| Nipple (MPT x MPT) | |||
| Nipple, Thread One End (Toe) (MPT x SPG) | |||
|
Plug (MIPT) |
|||
| 1/4" - 4" | |||
|
Reducer Bushing (MIPT x FIPT) |
|||
| 3/8" x 1/4" | 1/2" x 1/4" | 1/2" x 3/8" | 3/4" x 1/4" |
| 3/4" x 3/8" | 3/4" x 1/2" | 1" x 1/4" | 1" x 3/8" |
| 1" x 1/2" | 1" x 3/4" | 1¼" x 1/2" | 1¼" x 3/4" |
| 1¼" x 1" | 1½" x 1/2" | 1½" x 3/4" | 1½" x 1" |
| 1½" x 1¼" | 2" x 1/2" | 2" x 3/4" | 2" x 1" |
| 2" x 1¼" | 2" x 1½" | 2½" x 2" | 3" x 1¼" |
| 3" x 1½" | 3" x 2" | 3" x 2½" | 4" x 3" |
|
Reducer Bushing (SPIGOT x FIPT) |
|||
| 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | 1¼" x 3/4" |
| 1¼" x 1" | 1½" x 1/2" | 1½" x 3/4" | 1½" x 1" |
| 1½" x 1¼" | 2" x 1/2" | 2" x 3/4" | 2" x 1" |
| 2" x 1¼" | 2" x 1½" | 2½" x 2" | 3" x 2" |
| 3" x 2½" | 4" x 2" | 4" x 3" | |
|
Tee (FIPT x FIPT x FIPT) |
|||
| 1/4" - 4" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC I-G1 |
LASCO |
ASTM D2609 |
|
90° Ell (INSERT x FIPT) |
|||
| 1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" |
| 1 1/2" x 1 1/2" | 2" x 2" | 3/4" x 1/2" | 1" x 1/2" |
| 1" x 3/4" | 1 1/4" x 1/2" | 1 1/4" x 3/4" | 1 1/4" x 1" |
| 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1 1/2" | |
|
90° Ell (INSERT x INSERT) |
|||
| 1/2" - 2" & 3" | 3/4" x 1/2" | 1" x 3/4" | 1 1/4" x 1" |
| 1 1/2" X 1 1/4" | |||
|
90° Ell (INSERT x MIPT) |
|||
| 1/2" - 2" | |||
|
Coupling (INSERT x INSERT) |
|||
| 1/2" - 4" | 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" |
| 1 1/4" x 3/4" | 1 1/4" x 1" | 1 1/2" x 3/4" | 1 1/2" x 1" |
| 1 1/2" x 1 1/4" | 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" |
|
Cross (INSERT x INSERT x INSERT x INSERT) |
|||
| 3/4" - 1" | |||
|
Female Adapter (INSERT x FIPT) |
|||
| 1/2 " - 2" | |||
|
Insert Plug |
|||
| 1/2" - 2" | |||
|
Male Adapter (INSERT x MIPT) |
|||
| 1/2" - 4" | 3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" |
| 1 1/4" x 1" | 1 1/2" x 1" | 1 1/4" x 3/4" | 1 1/2" x 1 1/4" |
| 1 1/4" x 1 1/4" | 2" x 1 1/2" | ||
|
Tee (INSERT x INSERT x FIPT) |
|||
| 1/2" x 1/2" x 1/2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | 1 1/4" x 1 1/4" x 1 1/4" |
| 2" x 2" x 2" | 3/4" x 1/2" x 1/2" | 3/4" x 3/4" x 1/2" | 1" x 3/4" x 1/2" |
| 1" x 3/4" x 3/4" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | 1 1/4" x 1" x 1/2" |
| 1 1/4" x 1" x 3/4" | 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | 1 1/4" x 1 1/4" x 1" |
| 1 1/2" x 1 1/4" x 1/2" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/2" x 1 1/2" x 3/4" |
| 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1 1/4" | 1 1/2" x 1 1/2" x 1 1/2" | 2" x 2" x 1/2" |
| 2" x 2" x 3/4" | 2" x 2" x 1" | 2" x 2" x 1 1/2" | |
|
Tee (INSERT x INSERT x INSERT) |
|||
| 1/2" - 3" | 1/2" x 1/2" x 3/4" | 3/4" x 1/2" x 1/2" | 3/4" x 3/4" x 1/2" |
| 3/4" x 3/4" x 1" | 1" x 3/4" x 1/2" | 1" x 3/4" x 3/4" | 1" x 1" x 1/2" |
| 1" x 1" x 3/4" | 1" x 1" x 1 1/4" | 1 1/4" x 1" x 3/4" | 1 1/4" x 1" x 1" |
| 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | 1 1/4" x 1 1/4" x 1" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/4" x 1/2" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/2" x 1 1/2" x 3/4" |
| 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1 1/4" | 1 1/2" x 1 1/2" x 1 1/2" | 2" x 2" x 1/2" |
| 2" x 2" x 3/4" | 2" x 2" x 1" | 2" x 2" x 1 1/4" | 2" x 2" x 1 1/2" |
|
Tee (INSERT x INSERT x MIPT) |
|||
| 1 /2" - 1 1/2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings§ +++ [1] [G] |
CPVC |
LASCO |
CSA B137.6 |
|
CTS 45° Ell (S x S) |
|||
| 1/2" - 2" (4117-xxx) | |||
|
CTS 5° Ell (S x Sp) |
|||
| 1/2" - 1" (4127-xxx) | |||
|
CTS Bushing |
|||
| 1/2" - 2" (4137-xxx) | |||
|
CTS Cap |
|||
| 1/2" - 2" (4147-xxx) | |||
|
CTS Coupling |
|||
| 1/2" - 2" (4129-xxx) | |||
|
CTS Male Adapter |
|||
| 1/2" - 2" (4136-xxx) | |||
|
CTS Reducer Coupling |
|||
| 1/2" - 1" (4129-xxx) | |||
|
CTS Reducing Ell |
|||
| 3/4" x 1/2" (4106-xxx) | |||
|
CTS Street Adapter |
|||
| 1/2" ( 4161-xxx) | |||
|
CTS Street Ell (H x S) |
|||
| 1/2" - 1" (4109-xxx) | |||
|
CTS Sweep Ell |
|||
| 1/2" - 2" (4106-xxx) | |||
|
CTS Tee |
|||
| 1/2" - 2" (4101-xxx) | |||
|
IPS x CTS Transition Bushing |
|||
| 1/2" - 2" (4140-xxx) | |||
|
IPS x CTS Transition Coupling |
|||
| 3/4" - 1" (4141-xxx) | |||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] xxx designates the following sizes:
002 - 1/4"
003 - 3/8"
005 - 1/2"
007 - 3/4"
010 - 1"
012 - 1 1/4"
015 - 1 1/2"
020 - 2"
025 - 2 1/2"
030 - 3"
040 - 4"
052 - 3/8" x 1/4"
060 - 6"
072 - 1/2" x 1/4"
073 - 1/2" x 3/8"
080 - 8"
101 - 3/4" x 1/2"
130 - 1" x 1/2"
131 - 1" x 3/4"
166 - 1 1/4" x 1/2"
167 - 1 1/4" x 3/4"
168 - 1 1/2" x 1"
209 - 1 1/2" x 1/2"
210 - 1 1/2" x 3/4"
211 - 1 1/2" x 1"
212 - 1 1/2" x 1 1/4"
247 - 2" x 1/2"
248 - 2" x 3/4"
249 - 2" x 1"
250 - 2" x 1 1/4"
251 - 2" x 1 1/2"
289 - 2 1/2" x 1"
291 - 2 1/2" x 1 1/2"
292 - 2 1/2" x 2"
334 - 3" x 3" x 3/4"
335 - 3" x 3" x 1"
337 - 3" x 1 1/2"
338 - 3" x 2"
339 - 3" x 2 1/2"
420 - 4" x 2"
421 - 4" x 2 1/2"
422 - 4" x 3"
532 - 6" x 4"
585 - 8" x 6"
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 284
Processing time was 0 seconds