These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=31300&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Dura Plastic Products, Inc. | |
| 533 East Third Street | |
| P.O. Box 2097 | |
| Beaumont, CA 92223 | |
| United States | |
| 951-845-3161 | |
| Visit this company's website |
Facility : Beaumont, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+++ [G] |
CPVC |
Dura |
ASTM D2846 |
| CTS01-005 – 1/2" Tee | |||
| CTS01-007 – 3/4" Tee | |||
| CTS01-010 – 1" Tee | |||
| CTS01-020 – 2" x 2" x 2" Tee | |||
| CTS01-074 - 1/2" x 1/2" x 3/4" Tee | |||
| CTS01-094 – 3/4" x 1/2" x 1/2" Tee | |||
| CTS01-095 - 3/4" x 1/2" x 3/4" Tee | |||
| CTS01-101 - 3/4" x 3/4" x 1/2" Tee | |||
| CTS01-130 – 1" x 1" x 1/2" Tee | |||
| CTS01-131 – 1" x 1" x 3/4" Tee | |||
| CTS06-005 - 1/2" 90 Degree Elbow | |||
| CTS06-007 - 3/4" 90 Degree Elbow | |||
| CTS06-010 - 1" 90 Degree Elbow | |||
| CTS09-005 – 1/2" 90 Degree Street Elbow | |||
| CTS09-007 – 3/4" 90 Degree Street Elbow | |||
| CTS17-005 – 1/2" 45 Degree Elbow | |||
| CTS17-007 – 3/4" 45 Degree Elbow | |||
| CTS17-010 – 1" 45 Degree Elbow | |||
| CTS26-005 – 1/2" Drop Ear Elbow | |||
| CTS29-005 – 1/2" Coupling | |||
| CTS29-007 – 3/4" Coupling | |||
| CTS29-010 – 1" Coupling | |||
| CTS29-101 – 3/4" x 1/2" Reducing Coupling | |||
| CTS35-005 - 1/2" Female Adapter | |||
| CTS35-007 - 3/4" Female Adapter | |||
| CTS35-010 - 1" Female Adapter | |||
| CTS36-005 – 1/2" Male Adapter | |||
| CTS36-007 – 3/4" Male Adapter | |||
| CTS36-010 – 1" Male Adapter | |||
| CTS37-101 - 3/4" x 1/2" Reducer Bushing | |||
| CTS47-005 – 1/2" Cap | |||
| CTS47-007 – 3/4" Cap | |||
| CTS47-010 – 1" Cap | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+ [G] |
PVC |
DURA |
ASTM D2467 |
|
45° Ell (S x S) Sch 80 |
|||
| 1/2" - 8" | 10" | ||
|
90° Ell (S x FPT) Sch 80 |
|||
| 1/4" - 3" | |||
|
90° Ell (S x S) Sch 80 |
|||
| 1/4" - 8" | 10" | ||
|
90° Street Ell (Mipt x Fipt) Sch 80 |
|||
| 1", 1 1/4", 1 1/2" | |||
|
90° Street Ell (Mipt x Slip) Sch 80 |
|||
| 1", 1 1/4", 1 1/2" | |||
|
90° Street Ell (Spg x Fipt) Sch 80 |
|||
| 1", 1 1/4", 1 1/2" | |||
|
90° Street Ell (Spg x Slip) Sch 80 |
|||
| 1", 1 1/4", 1 1/2" | |||
|
Cap (Slip) Sch 80 |
|||
| 1/4" - 8" | 10" | ||
|
Coupling (S x S) Sch 80 |
|||
| 1/2" - 8" | 10" | 12" | |
|
Female Adapter (FPT x S) Sch 80 |
|||
| 1" x 3/4" | 1/4" - 2" | 2" x 1 1/2" | 3/4" x 1" |
|
Female Adapter (Slip x Fipt) Sch 80 |
|||
| 2 1/2", 3", 4" | |||
|
Male Adapter (MPT x S) Sch 80 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 2" | 1 1/4" x 1 1/2" |
| 1 1/4" x 1" | 1" x 1 1/4" | 1" x 1/2" | 1" x 3/4" |
| 1/2" x 1" | 1/2" x 1/4" | 1/2" x 3/4" | 1/2" x 3/8" |
| 1/4" x 1/2" | 1/4" x 3/8" | 2 1/2" x 2" | 2" x 1 1/2" |
| 2", 2 1/2", 3", 4" | 3" x 2 1/2" | 3/4" x 1" | 3/4" x 1/2" |
| 3/4" x 1/4" | 3/4" x 3/8" | 3/8" x 1/2" | 3/8" x 1/4" |
| 4" x 3" | |||
|
Male Adapter (Mipt x Slip) Sch 80 |
|||
| 1", 1 1/4", 1 1/2" | 1/4", 3/8", 1/2", 3/4" | ||
|
Plug (Spg) Sch 80 |
|||
| 1/2" - 4" | |||
|
Reducer Bushing (Spg x FPT) Sch 80 |
|||
| 1" x 3/8" | 1/2" x 1/4" | 1/2" x 1/8" | 1/2" x 3/8" |
| 2 1/2" x 1" | 2 1/2" x 1/2" | 2 1/2" x 3/4" | 3" x 1 1/2" |
| 3" x 1 1/4" | 3" x 1" | 3" x 1/2" | 3" x 3/4" |
| 3/4" x 1/4" | 3/4" x 3/8" | 4" x 1 1/2" | 4" x 1 1/4" |
| 4" x 1" | 4" x 1/2" | 4" x 3/4" | |
|
Reducer Bushing (Spg x Fipt) Sch 80 |
|||
| 1 1/2" x 1/2" | 1 1/4" x 1" | 1 1/4" x 1/2" | 1 1/4" x 3/4" |
| 1" x 1/2" | 1" x 3/4" | 2 1/2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 2" | 3" x 2 1/2" | 3" x 2" | 3/4" x 1/2" |
| 3/8" x 1/4" | 4" x 2 1/2" | 4" x 2" | |
|
Reducer Bushing (Spg x S) Sch 80 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4 |
| 1 1/4" x 1" | 1 1/4" x 1/2" | 1 1/4" x 3/4" | 1" x 1/2" |
| 1" x 3/4" | 2 1/2" x 2" | 2" x 1 1/2" | 2" x 1 1/4" |
| 2" x 1/2" | 3" x 2 1/2" | 3" x 2" | 3/4" x 1/2" |
| 4" x 2 1/2" | 4" x 2" | 4" x 3" | 5" x 4" |
| 6" x 2 1/2" | 6" x 3" | 6" x 4" | 6" x 5" |
|
Reducer Bushing (Spg x Slip) Sch 80 |
|||
| 1/2" x 1/4" | 1/2" x 3/8" | 2 1/2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1" | 2 1/2" x 1/2" | 2 1/2" x 3/4" | 2" x 1" |
| 2" x 3/4" | 3" x 1/2" | 3" x 1 1/2" | 3" x 1 1/4" |
| 3" x 1" | 3" x 3/4" | 6" x 2" | |
|
Reducer Coupling (Slip x Slip) Sch 80 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/4" x 1" | 1" x 1/2" |
| 1" x 3/4" | 2" x 1 1/2" | 3" x 2" | 3/4" x 1/2" |
| 4" x 3" | 6" x 4" | 8" x 6" | |
|
Solid Style Flange (Blind) Sch 80 |
|||
| 1 1/2" | 2 1/2" | 2" | 3" |
| 4" | 5" | 6" | 8" |
|
Solid Style Flange (Slip) Sch 80 |
|||
| 1 1/2" | 2 1/2" | 2" | 3" |
| 4" | 5" | 6" | 8" |
|
Solid Style Flange (Spigot) Sch 80 |
|||
| 1 1/2" | 2 1/2" | 2" | 3" |
| 4" | 5" | 6" | 8" |
|
Tee (S x S x FPT) Sch 80 |
|||
| 1/4" - 2" | |||
|
Tee (S x S x S) Sch 80 |
|||
| 1/4" - 8" | 10" | ||
|
Tee Reducing (S x S x S) Sch 80 |
|||
| 2 1/2" x 2 1/2" x 1 1/2" | 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1/2" |
| 2 1/2" x 2 1/2" x 2" | 2 1/2" x 2 1/2" x 3/4" | 2" x 2" x 1 1/2" | 4" x 4" x 2" |
| 6" x 6" x 4" | 8" x 8" x 6" | ||
|
Van Stone Style (Blind) Sch 80 |
|||
| 10" | 12" | ||
|
Van Stone Style (Slip) Sch 80 |
|||
| 10" | 12" | 2 1/2" | 2" |
| 3" | 4" | 5" | 6" |
| 8" | |||
|
Van Stone Style (Spigot) Sch 80 |
|||
| 10" | 12" | 2 1/2" | 2" |
| 3" | 4" | 5" | 6" |
| 8" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC |
DURA |
ASTM D2464 |
|
45° Ell (Fipt x Fipt) Sch 80 |
|||
| 1", 1 1/4", 1 1/2" | 1/4", 3/8", 1/2", 3/4" | 2", 3", 4" | |
|
90° Ell (FPT x FPT) Sch 80 |
|||
| 1/4" - 4" | |||
|
Cap (FPT) Sch 80 |
|||
| 1/4" - 4" | |||
|
Female Adapter (Spg x FPT) Sch 80 |
|||
| 1/4" - 2" | |||
|
Male Adapter (Spg x MPT) Sch 80 |
|||
| 1/4" - 2" | |||
|
Plug (MPT) Sch 80 |
|||
| 1/4" - 4" | |||
|
Reducer Bushing (MPT x FPT) Sch 80 |
|||
| 1 1/4" x 1" | 1 1/4" x 1/2" | 1 1/4" x 3/4" | 1" x 1/2" |
| 1" x 1/4" | 1" x 1/4" | 1" x 3/8" | 1/2" x 1/8" |
| 1/2" x 3/4" | 1/2" x 3/8" | 1/4" x 1/8" | 3/4" x 1/2" |
| 3/4" x 1/4" | 3/4" x 3/8" | 3/8" x 1/4" | 3/8" x 1/8" |
|
Reducer Bushing (Mipt x Fipt) Sch 80 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4" |
| 2" x 1 1/2" | 2" x 1 1/4" | 2" x 1" | 2" x 1/2" |
| 2" x 3/4" | 3" x 2" | 4" x 2" | 4" x 3" |
|
Reducer Bushing (Spg x FPT) Sch 80 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 3/4" | 2" x 1 1/2" |
| 2" x 1 1/4" | 2" x 1" | 2" x 1/2" | 3" x 3/4" |
| 4" x 3" | |||
|
Reducing Threaded Coupling (Fipt x Fipt) Sch 80 |
|||
| 1 1/2" x 1" | 1 1/4" x 3/4" | 1" x 1/2" | 1" x 3/4" |
| 1/2" x 1/4" | 1/2" x 3/8" | 2" x 1 1/2" | 3/4" x 1/2" |
| 3/8" x 1/4" | |||
|
Tee (FPT x FPT x FPT) Sch 80 |
|||
| 1/4" - 4" | |||
|
Tee (FPT x FPT x S) Sch 80 |
|||
| 1/4" - 2" | |||
|
Tee (S x FPT x FPT) Sch 80 |
|||
| 1/4" - 2" | |||
|
Threaded Coupling (FPT x FPT) Sch 80 |
|||
| 1/2", 3/4", 1", 1/4" | 2", 2 1/2", 3", 4" | 3/8", 1 1/4", 1 1/2" | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC |
DURA |
ASTM D2466 |
|
45° Ell Sch 40 |
|||
| 1 1/2"§ | 1 1/4"§ | 1"§ | 1/2" - 8" |
| 10" | 12" | 2 1/2"§ | 2"§ |
|
45° Ell (Spg x S) Sch 40 |
|||
| 1 1/2" | 2" | ||
|
90° Ell Sch 40 |
|||
| 10" | 12" | 3/8" thru 8" | |
|
90° Ell (FPT) Sch 40 |
|||
| 1/2" - 4" | |||
|
90° Ell Reducing Sch 40 |
|||
| 1 1/4" x 1" | 1" x 1/2" | 1" x 3/4"§ | 2" x 1 1/2"§ |
| 3/4" x 1/2" | |||
|
90° Ell Reducing (FPT) Sch 40 |
|||
| 1 1/4" x 1" | 1" x 1/2" | 1" x 3/4" | 3/4" x 1/2" |
|
90° Street Ell (MPT x FPT) Sch 40 |
|||
| 1 1/2" | 1 1/4" | 1" | 1/2" |
| 2" | 3/4" | ||
|
90° Street Ell (MPT x S) Sch 40 |
|||
| 1 1/2" | 1/2" | ||
|
90° Street Ell (MPT) Sch 40 |
|||
| 1 1/4" | 1" | 1" x 3/4" | 1/2" x 3/4" |
| 2" | 3/4" | ||
|
90° Street Ell (Spg x FPT) Sch 40 |
|||
| 1 1/2" | 1 1/4" | 1" | 1/2" |
| 2" | 3/4" | ||
|
90° Street Ell (Spg x S) Sch 40 |
|||
| 1 1/2"§ | 1"§ | ||
|
90° Street Ell (Spg x S) Sch 40 |
|||
| 1" x 1/2" | |||
|
90° Street Ell (Spg x S) Sch 40 |
|||
| 1/2"§ | |||
|
90° Street Ell (Spg x S) Sch 40 |
|||
| 1/2" | 1/2" x 1" | ||
|
90° Street Ell (Spg x S) Sch 40 |
|||
| 2"§ | 3/4"§ | 3/4" thru 2" | |
|
90° Street Ell (Spg) Sch 40 |
|||
| 1 1/4" - 2" | |||
|
90° Street Ell Reducing (MPT) Sch 40 |
|||
| 1" x 1/2" | 1" x 3/4" | 1/2" x 3/4" | |
|
90° Street Ell Reducing (Mipt x Slip) Sch 40 |
|||
| 1" x 3/8" | 1/2" x 3/8" | 3/4" x 1" | 3/4" x 1/2" |
| 3/4" x 3/8" | |||
|
90° Street Ell Reducing (S) Sch 40 |
|||
| 1" x 3/4" | 1/2" x 3/4" | 3/4" x 1" | 3/4" x 1/2" |
|
90° Street Ell Reducing (Spg x Slip) Sch 40 |
|||
| 1" x 3/8" | 1/2" x 3/8" | 3/4" x 3/8" | |
|
Cap Sch 40 |
|||
| 1 1/2"§ | 1"§ | 1/2"§ | 1/2" - 8" |
| 10" | 12" | 2"§ | |
|
Cap (FPT) Sch 40 |
|||
| 1/2" - 4" | |||
|
Coupling (FPT x FPT) Sch 40 |
|||
| 1" | 1/2" | 3/4" | |
|
Coupling (S x S) Sch 40 |
|||
| 1 1/2"§ | 1"§ | 1/2" - 8" | 10" |
| 12" | 2"§ | 3/4"§ | |
|
Coupling, Reducing (S x S) Sch 40 |
|||
| 1 1/4" x 1" | 1 1/4" x 3/4" | 1" x 1/2" | 1" x 3/4" |
| 10" x 6" | 10" x 8" | 12" x 10" | 12" x 6" |
| 12" x 8" | 2" x 1 1/2" | 3/4" x 1/2" | |
|
Cross (Slip) Sch 40 |
|||
| 1 1/2", 2" | 1/2", 3/4", 1", 1 1/4" | ||
|
Extra Deep Coupling (S x S) Sch 40 |
|||
| 1 1/2", 2", 2 1/2, 3", 4" | |||
|
Female Adapter (FPT) Sch 40 |
|||
| 1/2" - 2" | 3" | ||
|
Female Adapter (S x FPT) Sch 40 |
|||
| 1 1/2" x 2" | 1" x 1/2" | 1/2"§ | 1/2" x 1/4" |
| 1/2" x 3/8" | 1/4", 2 1/2", 4" | 3/4"§ | |
|
Female Adapter (Spg x FPT) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1/2" - 4" | ||
|
Female Adapter Reducing (FPT) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1 1/4" x 1 1/2" | 1 1/4" x 1" | 1" x 1 1/4" |
| 1" x 3/4" | 1/2" x 1" | 1/4" x 1/2" | 1/4" x 3/4" |
| 2" x 1 1/2" | 3/4" x 1" | 3/4" x 1/2" | 3/8" x 1/2" |
|
Female Adapter Reducing (S x FPT) Sch 40 |
|||
| 1 1/2" x 2" | 1" x 1/2" | 1/2" x 1/4" | 1/2" x 3/8" |
|
Male Adapter (MPT) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 2" | 1 1/4" x 1 1/2" | 1 1/4" x 1" |
| 1"§ | 1" x 1 1/4" | 1" x 3/4" | 1/2" x 1" |
| 1/2" x 3/4" | 1/2" x 3/8" | 1/4" x 3/8" | 2 1/2" x 2" |
| 2" x 1 1/2" | 3/4" x 1" | 3/4" x 1/2" | 3/8" - 8" |
| 3/8" x 1/2" | |||
|
Male Adapter Reducing (MPT x S) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 2" | 1 1/2" x 3/4"§ |
| 1 1/4" x 1" | 1" x 1/2" | 1" x 3/4" | 1/2" x 1/4" |
| 1/4" x 1/2" | 3" x 2 1/2" | 3/4" x 1/4" | 3/4" x 3/8" |
| 3/8" x 1/4" | 4" x 3" | ||
|
Male Adapter Reducing (Mipt x Slip) Sch 40 |
|||
| 2 1/2" x 1 1/2" | 2 1/2" x 1 1/4" | 2 1/2" x 1" | 2 1/2" x 1/2" |
| 2 1/2" x 3/4" | 2 1/4 x 1/2" | 3/4" x 1 1/4" | |
|
Male Fitting Adapter (SPG x MPT) Sch 40 |
|||
| 1 1/2", 2" | 1/4", 3/8", 1/2", 1" | 3/4", 1", 1 1/4" | |
|
Plug (MPT) Sch 40 |
|||
| 1 1/2", 2", 2 1/2" | 1/4", 3/8", 1/2" | 3", 4" | 3/4", 1", 1 1/4" |
|
Plug (Spg) Sch 40 |
|||
| 1 1/2"§ | 1"§ | 1/2" - 4" | 2"§ |
| 3"§ | 3/4"§ | ||
|
Reducer Bushing (MPT x FPT) Sch 40 |
|||
| 1 1/4" x 1" | 1 1/4" x 1/2" | 1 1/4" x 3/4" | 1" x 1/2" |
| 1" x 1/4" | 1" x 3/4" | 1" x 3/8" | 1/2" x 1/4" |
| 1/2" x 1/8" | 1/2" x 3/8" | 1/4" x 1/8" | 3/4" x 1/2" |
| 3/4" x 1/4" | 3/4" x 3/8" | 3/8" x 1/4" | 3/8" x 1/8" |
|
Reducer Bushing (Mipt x Fipt) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4" |
| 2" x 1 1/2" | |||
|
Reducer Bushing (Spg x FPT) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 1/2" | 1 1/2" x 3/4" |
| 1 1/4" x 1" | 1 1/4" x 1/2" | 1 1/4" x 3/4" | 1" x 1/2" |
| 1" x 1/4" | 1" x 3/4" | 1" x 3/8" | 1/2" x 1/4" |
| 1/2" x 1/8" | 1/2" x 3/8" | 2 1/2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1" | 2 1/2" x 1/2" | 2 1/2" x 2 1/2 | 2 1/2" x 3/4" |
| 2" x 1 1/4" | 2" x 1" | 2" x 1/2" | 2" x 3/4"§ |
| 3" x 1 1/2" | 3" x 1 1/4" | 3" x 1" | 3" x 1/2" |
| 3" x 2 1/2" | 3" x 2" | 3" x 3/4" | 3/4" x 1/2" |
| 3/4" x 1/4" | 3/4" x 3/8" | 4" x 1 1/2" | 4" x 1 1/4" |
| 4" x 1" | 4" x 1/2" | 4" x 2 1/2" | 4" x 2" |
| 4" x 3" | 4" x 3/4" | 6" x 2" | 6" x 3" |
| 6" x 4" | |||
|
Reducer Bushing (Spg x S) Sch 40 |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1"§ | 1 1/2" x 1/2"§ | 1 1/2" x 3/4"§ |
| 1 1/4" x 1" | 1 1/4" x 1/2" | 1 1/4" x 3/4"§ | 1" x 1/2"§ |
| 1" x 3/4"§ | 1/2" x 1/4" | 1/2" x 3/8"§ | 10" x 4" |
| 10" x 6" | 10" x 8" | 12" x 10" | 12" x 4" |
| 12" x 6" | 12" x 8" | 2 1/2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1" | 2 1/2" x 1/2" | 2 1/2" x 2"§ | 2 1/2" x 3/4" |
| 2" x 1 1/2"§ | 2" x 1 1/4" | 2" x 1"§ | 2" x 1/2"§ |
| 2" x 3/4"§ | 3" x 1 1/2" | 3" x 1 1/4" | 3" x 1" |
| 3" x 1/2" | 3" x 2 1/2" | 3" x 2"§ | 3" x 3/4" |
| 3/4" x 1/2"§ | 4" x 2" | 4" x 3" | 5" x 2 1/2" |
| 5" x 2" | 5" x 3" | 5" x 4" | 6" x 2 1/2" |
| 6" x 2" | 6" x 3" | 6" x 4" | 6" x 5" |
| 8" x 2 1/2" | 8" x 2" | 8" x 3" | 8" x 4" |
| 8" x 5" | 8" x 6" | ||
|
Side Outlet 90° Ell (S x S x FPT) Sch 40 |
|||
| 1" x 1" x 1/2" | 1/2" | 3/4" x 3/4" x 1/2" | |
|
Side Outlet 90° Ell (S x S x S) Sch 40 |
|||
| 1" x 1" x 1/2" | 1/2" | 3/4" x 3/4" x 1/2" | |
|
Tee (FPT x FPT x FPT) Sch 40 |
|||
| 1/2" - 2" | |||
|
Tee (FPT) Sch 40 |
|||
| 1/2" - 4" | |||
|
Tee (S x S x S) Sch 40 |
|||
| 1 1/2"§ | 1"§ | 1/2"§ | 10" |
| 12" | 2 1/2"§ | 2"§ | 3/4"§ |
| 3/8" thru 8" | |||
|
Tee Reducing Sch 40 |
|||
| 1 1/2" x 1 1/2" x 1 1/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/2" x 1 1/2" x 2" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/4" x 1/2" | 1 1/2" x 1 1/4" x 3/4" |
| 1 1/4" x 1 1/4" x 1 1/2" | 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" |
| 1 1/4" x 1" x 1" | 1 1/4" x 1" x 1/2" | 1 1/4" x 1" x 3/4" | 1" x 1" x 1 1/2" |
| 1" x 1" x 1 1/4" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | 1" x 1/2" x 1" |
| 1" x 3/4" x 1" | 1" x 3/4" x 1/2" | 1" x 3/4" x 3/4" | 1/2" x 1/2" x 3/4" |
| 10" x 10" x 8" | 12" x 12" x 10" | 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1/2" |
| 2 1/2" x 2 1/2" x 3/4" | 2" x 1 1/2" x 1" | 2" x 1 1/2" x 3/4" | 2" x 2" x 1 1/2" |
| 2" x 2" x 1 1/4" | 2" x 2" x 1" | 2" x 2" x 1/2" | 2" x 2" x 3/4" |
| 3" x 3" x 1 1/2" | 3" x 3" x 1" | 3" x 3" x 1/2" | 3" x 3" x 2" |
| 3" x 3" x 3/4" | 3/4" x 1/2" x 1/2" | 3/4" x 1/2" x 3/4" | 3/4" x 3/4" x 1" |
| 3/4" x 3/4" x 1/2" | 3/8" x 3/4" x 1/2" | 4" x 4" x 1" | 4" x 4" x 1/2" |
| 4" x 4" x 3" | 4" x 4" x 3/4" | 5" x 4" x 3" | 5" x 5" x 4" |
| 6" x 6" x 2" | 6" x 6" x 3" | 6" x 6" x 4" | 8" x 8" x 2" |
| 8" x 8" x 3" | 8" x 8" x 4" | 8" x 8" x 6" | |
|
Tee Reducing (FPT) Sch 40 |
|||
| 1 1/2" x 1 1/2" x 1 1/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/2" x 1 1/2" x 2" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/4" x 1/2" | 1 1/2" x 1 1/4" x 3/4" |
| 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | 1 1/4" x 1" x 1" |
| 1 1/4" x 1" x 1/2" | 1 1/4" x 1" x 3/4" | 1" x 1" x 1 1/4" | 1" x 1" x 1/2" |
| 1" x 1" x 3/4" | 1" x 1/2" x 1" | 1" x 3/4" x 1" | 1" x 3/4" x 1/2" |
| 1" x 3/4" x 3/4" | 1/2" x 1/2" x 1/4" | 1/2" x 1/2" x 1/8" | 1/2" x 1/2" x 3/4" |
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1/2" | 2 1/2" x 2 1/2" x 3/4" | 2" x 1 1/2" x 1" |
| 2" x 1 1/2" x 3/4" | 2" x 2" x 1 1/2" | 2" x 2" x 1 1/4" | 2" x 2" x 1" |
| 2" x 2" x 1/2" | 2" x 2" x 3/4" | 3" x 3" x 1 1/2" | 3" x 3" x 1" |
| 3" x 3" x 1/2" | 3" x 3" x 2" | 3" x 3" x 3/4" | 3/4" x 1/2" x 1/2" |
| 3/4" x 1/2" x 3/4" | 3/4" x 3/4" x 1" | 3/4" x 3/4" x 1/2" | 3/8" x 3/8" x 1/2" |
| 4" x 4" x 1" | 4" x 4" x 1/2" | 4" x 4" x 2" | 4" x 4" x 3" |
| 4" x 4" x 3/4" | 5" x 5" x 3" | 5" x 5" x 4" | 6" x 6" x 2" |
| 6" x 6" x 3" | 6" x 6" x 4" | 8" x 8" x 2" | 8" x 8" x 3" |
| 8" x 8" x 4" | |||
|
Tee Reducing (S x S x FPT) Sch 40 |
|||
| 1 1/4" x 1 1/4" x 1 1/2" | 2 1/2" x 2 1/2" x 1 1/2" | 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 2" |
| 2" x 2" x 3/4"§ | 4" x 4" x 2" | ||
|
Tee Reducing (S x S x S) Sch 40 |
|||
| 1 1/2" x 1 1/2" x 2"§ | 1 1/2" x 1 1/2" x 3/4"§ | 1 1/4" x 1 1/4" x 1 1/2" | 2 1/2" x 2 1/2" x 1 1/2" |
| 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 2" | 2" x 2" x 1 1/2"§ | 2" x 2" x 1"§ |
| 2" x 2" x 1/2"§ | 2" x 2" x 3/4"§ | 3/4" x 3/4" x 1/2"§ | 4" x 4" x 2" |
| 5" x 5" x 2" | |||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Insert Fittings+ [G] |
PVC |
DURA |
ASTM D2609 |
|
90° Ell (Barb) |
|||
| 1/2" - 2" | 3/4"§ | ||
|
90° Reducing Ell (Barb x Barb) |
|||
| 1 1/2" x 1 1/4" | 1 1/4" x 1" | 1" x 3/4" | 1" x 3/8" |
| 2" x 1 1/2" | 3/4" x 1/2" | 3/4" x 3/8" | |
|
Combination 90° Ell (Barb x FPT) |
|||
| 1/2" - 2" | |||
|
Combination 90° Ell (Barb x MPT) |
|||
| 1" x 1/2" | 1" x 3/4" | 1/2" - 2" | 1/2" x 3/4" |
| 3/4" x 1/2" | 3/8" x 3/4" | ||
|
Combination Reducing 90° Ell (Barb x FPT) |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/4" x 1" | 1 1/4" x 1/2" |
| 1 1/4" x 3/4" | 1" x 1/2" | 1" x 3/4" | 2" x 1 1/2" |
| 3/4" x 1/2" | 3/8" x 1/2" | ||
|
Combination Reducing 90° Ell (Barb x S) |
|||
| 3/4"§ | |||
|
Combination Reducing Tee (Barb x Barb x FPT) |
|||
| 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/4" x 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/4" x 1" x 1/2" |
| 1 1/4" x 1" x 3/4" | 1" x 3/4" x 1/2" | 1" x 3/4" x 3/4" | 3/4" x 1/2" x 1/2" |
|
Combination Tee (Barb x Barb x FPT) |
|||
| 1/2" - 2" | 3/4"§ | ||
|
Combination Tee (Barb x Barb x MPT) |
|||
| 1/2" - 2" | |||
|
Combination and Reducing Tee (Barb x Barb x FPT) |
|||
| 1 1/2" x 1 1/2" x 1 1/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/4" x 1 1/4" x 1" |
| 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | 1" x 1" x 1/2" | 1" x 1" x 3/4" |
| 1/2" x 1 1/2" x 3/4" | 2" x 2" x 1 1/2" | 2" x 2" x 1" | 2" x 2" x 1/2" |
| 2" x 2" x 3/4" | 3/4" x 3/4" x 1/2" | ||
|
Coupling (Barb x Barb) |
|||
| 1/2" - 2" | 3/4"§ | ||
|
Female Adapter (FPT x Barb) |
|||
| 1/2" - 2" | |||
|
Fitting Adapter (Spg x Barb) |
|||
| 1"§ | 1" x 3/4"§ | 1/2"§ | 1/2" - 4" |
| 3/4"§ | |||
|
Male Adapter (MPT x Barb) |
|||
| 1/2" - 2" | |||
|
Male Adapter (Spg x Barb) |
|||
| 1 1/2"§ | |||
|
Plug (Barb) |
|||
| 1/2" - 2" | |||
|
Reducing Coupling (Barb x Barb) |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | 1 1/2" x 3/4" | 1 1/4" x 1" |
| 1 1/4" x 3/4" | 1" x 1/2" | 1" x 3/4" | 2" x 1 1/2" |
| 2" x 1 1/4" | 2" x 1" | 3/4" x 1/2" | |
|
Reducing Cross (Barb x Barb x Barb x Barb) |
|||
| 1 1/2" x 1 1/2" x 1 1/4" x 1 1/4" | 1 1/2" x 1 1/2" x 1" x 1" | 1 1/2" x 1 1/2" x 3/4" x 3/4" | 1 1/4" x 1 1/4" x 1" x 1" |
| 1 1/4" x 1 1/4" x 1/2" x 1/2" | 1 1/4" x 1 1/4" x 3/4" x 3/4" | 1" x 1" x 1/2" x 1/2" | 1" x 1" x 3/4" x 3/4" |
| 2" x 2" x 1 1/4" x 1 1/4" | 2" x 2" x 1 1/4" x 1 1/4" | 2" x 2" x 1" x 1" | 2" x 2" x 1/2" x 1/2" |
| 2" x 2" x 3/4" x 3/4" | 3/4" x 3/4" x 1/2" x 1/2" | ||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1 1/2" x 1 1/4" | 1 1/2" x 1" | ||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1 1/2" x 2" | 1 1/4" x 1 1/2" | ||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1 1/4" x 1" | 1 1/4" x 3/4" | ||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1" x 1 1/2" | 1" x 1 1/4" | ||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1" x 3/4" | |||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1/2" x 1" | |||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1/2" x 1/2" | |||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 1/2" x 3/4" | |||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 2" x 1 1/2" | |||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 3/4" x 1" | |||
|
Reducing Male Adapter (MPT x Barb) |
|||
| 3/4" x 1/2" | |||
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 1 1/2" x 1 1/2" x 1 1/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/2" x 1 1/2" x 3/4" |
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 1 1/2" x 1 1/4" x 1 1/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1" x 1" |
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | |
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 1 1/4" x 1" x 1/2" | 1 1/4" x 1" x 3/4" | ||
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 1" x 1" x 1/2" | 1" x 1" x 3/4" | 1" x 1" x 3/8" | |
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 1" x 1" x 3/8" | 1" x 3/4" x 1/2" | 1" x 3/4" x 3/4" | 2" x 1 1/2" x 1 1/2" |
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 2" x 2" x 1 1/2" | 2" x 2" x 1 1/4" | 2" x 2" x 1" | 2" x 2" x 1/2" |
| 2" x 2" x 3/4" | |||
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 3/4" x 1/2" x 1/2" | |||
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 3/4" x 3/4" x 1/2" | |||
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 3/4" x 3/4" x 3/8" | |||
|
Reducing Tee (Barb x Barb x Barb) |
|||
| 3/4" x 3/4" x 3/8" | |||
|
Side Outlet 90° Ell (Barb x Barb x FIPT) |
|||
| 1" x 1" x 1/2" | 1" x 1" x 3/4" | 3/4" x 3/4" x 1/2" | 3/4" x 3/4" x 3/4" |
|
Side Outlet Tee (Barb x Barb x Barb x FIPT) |
|||
| 1" x 1" x 1" x 1/2" | 1" x 1" x 1" x 3/4" | 3/4" x 3/4" x 3/4" x 1/2" | 3/4" x 3/4" x 3/4" x 3/4" |
|
Tee (Barb x Barb x Barb) |
|||
| 1/2" - 2" | 3/4"§ | ||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 873
Processing time was 1 seconds

