These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=32680&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| IPEX Incorporated |  |
| 3 Place Du Commerce, Suite 101 | |
| Île-Des-Soeurs | |
| Verdun, QC H3E 1H7 | |
| Canada | |
| 514-769-2200 | |
| Visit this company's website |
Facility : Edmonton, Alberta, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Tubing* § +++ [G] |
PE / AL / PE |
IPEX |
ASTM F1282 |
| 1"# ¢ | |||
|
1/2"# ¢ |
|||
|
3/4"# ¢ |
|||
|
5/8" |
|||
# Approved for cold and commercial hot end use applications. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. * Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ¢ § +++ [G] |
PE / AL / PE |
IPEX |
CSA B137.9 |
| 1"# | |||
|
1/2"# |
|||
|
3/4"# |
|||
|
5/8" |
|||
# Approved for cold and commercial hot end use applications. * Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ ^ [G] |
HDPE 3608 |
IPEX Inc |
AWWA C906 |
| 4" - 12" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ ^ [G] |
HDPE 3608/4710 |
IPEX Inc |
ASTM F714 |
| 4" - 12" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ ^ ¢ [G] |
HDPE 3608/4710 |
IPEX Inc |
CSA B137.1 |
| 1/2" - 6" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
NOTE: Only products bearing the NSF Mark are NSF Certified.
Facility : L'Assomption, Québec, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe^ ¢ § ** +++ [G] |
PEX 5006 |
Blue 904 |
ASTM F876/F877 |
| 3/4" - 2" SDR 9 | |||
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe^ ¢ § ** +++ [G] |
PEX 5006 |
Blue 904 |
AWWA C904 |
| 3/4" - 2" SDR 9 | |||
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : London, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
IPEX |
ASTM D2466 |
|
45° Elbow Sch 40 |
|||
| 10" (035926) | 12" (035927) | ||
|
45° Wye Sch 40 |
|||
| 3" | 4" | 6" | 6" x 6" x 4" |
|
90° Elbow Sch 40 |
|||
| 10" (035928) | 12" (035929) | ||
|
Reducer Bushing Sch 40 |
|||
| 10" x 8" (035691) | |||
|
Tees Sch 40 |
|||
| 10" (035930) | 12" (035931) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PVC I-G1 |
IPEX |
ASTM D2467 |
|
45º Elbow Sch 80 |
|||
| 10" (036862) | 12" (036863) | ||
|
45º Wye Sch 80 |
|||
| 3" | 4" | 6" | 6" x 6" x 4" |
|
90º Elbow Sch 80 |
|||
| 10" (036864) | 12" (036865) | ||
|
Cap Sch 80 |
|||
| 8" (036068) | |||
|
Reducer Bushing Sch 80 |
|||
| 10" x 8" (036270) | |||
|
Tees Sch 80 |
|||
| 10" (036866) | 12" (036876) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PVC I-G1 |
IPEX |
ASTM D3139 |
|
45° Elbow, G x G |
|||
| 2" | 2 1/2" | 3" | 4" |
| 6" | 8" | ||
|
90° Elbow, G x G |
|||
| 2" | 2 1/2" | 3" | 4" |
| 6" | 8" | ||
|
Cross, G x G x G x G |
|||
| 2" | 2 1/2" | 3" | 4" |
| 6" | |||
|
Male Adapter, G x Male Pipe Thread |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
| 4" | 6" | ||
|
Permanent Plug Spigot |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
| 4" | 6" | 8" | |
|
Reducer Bushing, G x SPG |
|||
| 2" x 1 1/2" | 2 1/2" x 2" | 3" x 2" | 3" x 2 1/2" |
| 4" x 2" | 4" x 2 1/2" | 4" x 3" | 6" x 2" |
| 6" x 2 1/2" | 6" x 3" | 6" x 4" | 8" x 4" |
| 8" x 6" | |||
|
Reducing Tee, G x G x G |
|||
| 2" x 1 1/2" | 2 1/2" x 2" | 3" x 1 1/2" | 3" x 2" |
| 3" x 2 1/2" | 4" x 2" | 4" x 2 1/2" | 4" x 3" |
| 6" x 2" | 6" x 2 1/2" | 6" x 3" | 6" x 4" |
| 8" x 2" | 8" x 3" | 8" x 4" | 8" x 6" |
|
Repair Coupling, G x G |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
| 4" | 6" | 8" | |
|
Spigot Adapter, G x Spigot |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
| 4" | 6" | ||
|
Stop Coupling, G x G |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
| 4" | 6" | 8" | |
|
Tap Coupling, G x G x AWWA Thread |
|||
| 4" x 4" x 3/4" | 4" x 4" x 1" | 6" x 6" x 3/4" | 6" x 6" x 1" |
| 6" x 6" x 2" | 8" x 8" x 2" | ||
|
Tap Service Tee |
|||
| 1 1/2" x 1 1/2" | 2" x 1/2" | 2" x 3/4" | 2" x 1" |
| 2" x 1 1/4" | 2" x 1 1/2" | 2" x 2" x 1/2" | 2 1/2" x 1/2" |
| 2 1/2" x 3/4" | 2 1/2" x 1" | 2 1/2" x 1 1/4" | 2 1/2" x 1 1/2" |
| 2 1/2" x 2" | 3" x 1/2" | 3" x 3/4" | 3" x 1" |
| 3" x 1 1/2" | 3" x 2" | 4" x 1/2" | 4" x 3/4" |
| 4" x 1" | 4" x 1 1/4" | 4" x 1 1/2" | 4" x 2" |
| 6" x 1/2" | 6" x 3/4" | 6" x 1" | 6" x 1 1/4" |
| 6" x 1 1/2" | 6" x 2" | ||
|
Tee, G x G x G |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
| 4" | 6" | 8" | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
CPVC IV-G1 |
IPEX |
ASTM F439 |
|
45° Elbow Sch 80 |
|||
| 10" (059087) | 12" (059088) | ||
|
45° Wye Sch 80 |
|||
| 3" | 4" | 6" | 6" x 6" x 4" |
|
90° Elbow Sch 80 |
|||
| 10" (059085) | 12" (059086) | ||
|
Cap Sch 80 |
|||
| 8" (059029) | |||
|
Reducer Sch 80 |
|||
| 10" x 8" (059036) | |||
|
Tees Sch 80 |
|||
| 10" (059062) | 12" (059084) | ||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Scarborough, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ [G] |
PVC 1120 |
IPEX INC@ |
ASTM D1785 |
| 1/2" - 24" Sch 40 | |||
| 1/2" - 24" Sch 80 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ This pipe product is also represented by the trade name XIRTEC140.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : St. Laurent, Québec, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ [G] |
PVCO |
BIONAX |
ASTM F1483 |
| 4" - 12" CIOD | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ [G] |
PVCO |
BIONAX |
ASTM F1483 |
| 4" - 12" IPS | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ [G] |
PVCO |
BIONAX |
AWWA C909 |
| 4" - 12" CIOD | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ [G] |
PVCO |
BIONAX |
AWWA C909 |
| 4" - 12" IPS | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Toronto, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+++ [G] |
CPVC |
AquaRise SR |
ASTM F438 |
|
SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT |
|||
| 359995 1" x 1" x 1/2" | |||
|
SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT |
|||
| 359994 3/4" x 3/4" x 1/2" | |||
|
SST Threaded Fitting: Adapter: Soc x FPT |
|||
| 359997 3/4" x 1/2" | |||
|
SST Threaded Fitting: Adapter: Soc x FPT |
|||
| 359998 1" x 1/2" | |||
|
SST Threaded Fitting: Adapter: Sp x FPT |
|||
| 359999 1" x 1/2" | |||
|
SST Threaded Fitting: Female Adapter: Soc x FPT |
|||
| 359996 1" | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
CPVC |
AquaRise SR |
CSA B137.6 |
|
SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT |
|||
| 359995 1" x 1" x 1/2" | |||
|
SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT |
|||
| 359994 3/4" x 3/4" x 1/2" | |||
|
SST Threaded Fitting: Adapter: Soc x FPT |
|||
| 359998 1" x 1/2" | |||
|
SST Threaded Fitting: Adapter: Soc x FPT |
|||
| 359997 3/4" x 1/2" | |||
|
SST Threaded Fitting: Adapter: Sp x FPT |
|||
| 359999 1" x 1/2" | |||
|
SST Threaded Fitting: Female Adapter: Soc x FPT |
|||
| 359996 1" | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
CPVC |
IPEX (AquaRise) |
ASTM F438 |
|
45° Elbow (Soc x Soc) |
|||
| 359164 1/2" | 359165 3/4" | 359166 1" | |
|
90° Elbow (Soc x Soc) |
|||
| 359194 1/2" | 359195 3/4" | 359196 1" | |
|
90° Street Elbow (S x S) |
|||
| 359175 1/2" | 359176 3/4" | 359177 1" | |
|
Cap (Soc) |
|||
| 359109 1/2" | 359110 3/4" | 359111 1" | |
|
Coupling (Soc x Soc) |
|||
| 359132 1/2" | 359133 3/4" | 359134 1" | |
|
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches) |
|||
| 359061 3/4" x 1/2" | |||
|
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches) |
|||
| 359060 3/4" x 1/2" | |||
|
Reducer Bushing (Sp x Soc) |
|||
| 359375 3/4" x 1/2" | 359376 1" x 1/2" | 359377 1" x 3/4" | |
|
Reducer Coupling (Soc x Soc) |
|||
| 359460 3/4" x 1/2" | 359461 1" x 1/2" | 359462 1" x 3/4" | |
|
Reducing Tee (S x S x S) |
|||
| 359514 3/4" x 1/2" x 1/2" | 359513 3/4" x 1/2" x 3/4" | 359492 3/4" x 3/4" x 1/2" | 359493 1" x 1" x 1/2" |
| 359494 1" x 1" x 3/4" | |||
|
Tee (Soc x Soc x Soc) |
|||
| 359481 1/2" | 359482 3/4" | 359483 1" | |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
CPVC |
IPEX (AquaRise) |
ASTM F439 |
|
45° Elbow (Soc x Soc) |
|||
| 359167 1 1/4" | 359168 1 1/2" | 359169 2" | 359170 2 1/2" |
| 359171 3" | 359172 4" | 359173 6" | |
|
90° Elbow (Soc x Soc) |
|||
| 359197 1 1/4" | 359198 1 1/2" | 359199 2" | 359200 2 1/2" |
| 359201 3" | 359202 4" | 359203 6" | |
|
Cap (Soc) |
|||
| 359112 1 1/4" | 359113 1 1/2" | 359114 2" | 359115 2 1/2" |
| 359116 3" | 359107 4" | 359108 6" | |
|
Coupling (Soc x Soc) |
|||
| 359135 1 1/4" | 359136 1 1/2" | 359137 2" | 359138 2 1/2" |
| 359139 3" | 359140 4" | 359141 6" | |
|
Reducer Bushing (Sp x Soc) |
|||
| 359378 1 1/4" x 1/2" | 359379 1 1/4" x 3/4" | 359380 1 1/4" x 1" | 359381 1 1/2" x 1/2" |
| 359382 1 1/2" x 3/4" | 359383 1 1/2" x 1" | 359384 1 1/2" x 1 1/4" | 359385 2" x 1/2" |
| 359386 2" x 3/4" | 359387 2" x 1" | 359388 2" x 1 1/4" | 359389 2" x 1 1/2" |
| 359390 2 1/2" x 3/4" | 359391 2 1/2" x 1" | 359392 2 1/2" x 2" | 359393 3" x 1 1/2" |
| 359394 3" x 2" | 359395 3" x 2 1/2" | 359428 4" x 1 1 /4" | 359429 4" x 1 1/2" |
| 359396 4" x 2" | 359430 4" x 2 1/2" | 359397 4" x 3" | 359398 6" x 2" |
| 359399 6" x 3" | 359400 6" x 4" | ||
|
Reducer Coupling (Soc x Soc) |
|||
| 359463 1 1/4" x 1" | 359465 1 1/2" x 1" | 359466 1 1/2" x 1 1/4" | 359467 2" x 1" |
| 359458 2" x 1 1/2" | 359470 3" x 2" | 359459 4" x 2" | 359472 4" x 3" |
|
Reducing Tee (S x S x S) |
|||
| 359495 1 1/4" x 1 1/4" x 1" | 359515 1 1/2" x 1 1/2" x 1/2" | 359496 1 1/2" x 1 1/2" x 3/4" | 359497 1 1/2" x 1 1/2" x 1" |
| 359498 2" x 2" x 1/2" | 359499 2" x 2" x 3/4" | 359500 2" x 2" x 1" | 359501 2" x 2" x 1 1/2" |
| 359503 2 1/2" x 2 1/2" x 1/2" | 359504 2 1/2" x 2 1/2" x 3/4" | 359505 2 1/2" x 2 1/2" x 1" | 359506 2 1/2" x 2 1/2" x 1 1/4" |
| 359507 2 1/2" x 2 1/2" x 2" | 359502 3" x 3" x 2" | 359508 4" x 4" x 2" | 359509 4" x 4" x 3" |
| 359510 6" x 6" x 2" | 359511 6" x 6" x 3" | 359512 6" x 6" x 4" | |
|
Tee (Soc x Soc x Soc) |
|||
| 359484 1 1/4" | 359485 1 1/2" | 359486 2" | 359487 2 1/2" |
| 359488 3" | 359489 4" | 359490 6" | |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings# +++ [G] |
CPVC 41 |
IPEX (AquaRise) |
ASTM F1970 |
|
Union (S x S) |
|||
| 359550 4" | 359520 1/2" | 359521 3/4" | 359522 1" |
| 359523 1 1/4" | 359524 1 1/2" | 359525 2" | 359526 3" |
|
Van Stone Style Flange 150 lbs. |
|||
| 359266 1 1/2" | 359267 2" | ||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings## +++ [G] |
CPVC 41 |
IPEX (Aquarise) |
ASTM F1970 |
|
Flange x Socket |
|||
| 359040 2 1/2" | 359041 3" | 359043 4" | 359042 6" |
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings# +++ [G] |
CPVC 41 |
IPEX (AquaRise) |
ASTM F1970 |
|
Flange x Socket |
|||
| 359228 1/2" | 359229 3/4" | 359230 1" | 359231 1 1/4" |
| 359232 1 1/2" | 359233 2" | 359234 2 1/2" | 359235 3" |
| 359236 4" | 359238 6" | ||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ +++ [G] |
CPVC |
IPEX (AquaRise) |
CSA B137.6 |
|
45° Elbow (Soc x Soc) |
|||
| 359164 1/2" | 359165 3/4" | 359166 1" | 359167 1 1/4" |
| 359168 1 1/2" | 359169 2" | 359170 2 1/2" | 359171 3" |
| 359172 4" | 359173 6" | ||
|
90° Elbow (Soc x Soc) |
|||
| 359194 1/2" | 359195 3/4" | 359196 1" | 359197 1 1/4" |
| 359198 1 1/2" | 359199 2" | 359200 2 1/2" | 359201 3" |
| 359202 4" | 359203 6" | ||
|
90° Street Elbow (S x S) |
|||
| 359175 1/2" | 359176 3/4" | 359177 1" | |
|
Cap (Soc) |
|||
| 359109 1/2" | 359110 3/4" | 359111 1" | 359112 1 1/4" |
| 359113 1 1/2" | 359114 2" | 359115 2 1/2" | 359116 3" |
| 359107 4" | 359108 6" | ||
|
Coupling (Soc x Soc) |
|||
| 359132 1/2" | 359133 3/4" | 359134 1" | 359135 1 1/4" |
| 359136 1 1/2" | 359137 2" | 359138 2 1/2" | 359139 3" |
| 359140 4" | 359141 6" | ||
|
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches) |
|||
| 359061 3/4" x 1/2" | |||
|
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches) |
|||
| 359060 3/4" x 1/2" | |||
|
Reducer Bushing (Sp x Soc) |
|||
| 359375 3/4" x 1/2" | 359376 1" x 1/2" | 359377 1" x 3/4" | 359378 1 1/4" x 1/2" |
| 359379 1 1/4" x 3/4" | 359380 1 1/4" x 1" | 359381 1 1/2" x 1/2" | 359382 1 1/2" x 3/4" |
| 359383 1 1/2" x 1" | 359384 1 1/2" x 1 1/4" | 359385 2" x 1/2" | 359386 2" x 3/4" |
| 359387 2" x 1" | 359388 2" x 1 1/4" | 359389 2" x 1 1/2" | 359390 2 1/2" x 3/4" |
| 359391 2 1/2" x 1" | 359392 2 1/2" x 2" | 359393 3" x 1 1/2" | 359394 3" x 2" |
| 359395 3" x 2 1/2" | 359428 4" x 1 1 /4" | 359429 4" x 1 1/2" | 359396 4" x 2" |
| 359430 4" x 2 1/2" | 359397 4" x 3" | 359398 6" x 2" | 359399 6" x 3" |
| 359400 6" x 4" | |||
|
Reducer Coupling (Soc x Soc) |
|||
| 359460 3/4" x 1/2" | 359461 1" x 1/2" | 359462 1" x 3/4" | 359463 1 1/4" x 1" |
| 359465 1 1/2" x 1" | 359466 1 1/2" x 1 1/4" | 359467 2" x 1" | 359458 2" x 1 1/2" |
| 359470 3" x 2" | 359459 4" x 2" | 359472 4" x 3" | |
|
Reducing Tee (S x S x S) |
|||
| 359513 3/4" x 1/2" x 3/4" | 359514 3/4" x 1/2" x 1/2" | 359492 3/4" x 3/4" x 1/2" | 359493 1" x 1" x 1/2" |
| 359494 1" x 1" x 3/4" | 359495 1 1/4" x 1 1/4" x 1" | 359515 1 1/2" x 1 1/2" x 1/2" | 359496 1 1/2" x 1 1/2" x 3/4" |
| 359497 1 1/2" x 1 1/2" x 1" | 359498 2" x 2" x 1/2" | 359499 2" x 2" x 3/4" | 359500 2" x 2" x 1" |
| 359501 2" x 2" x 1 1/2" | 359503 2 1/2" x 2 1/2" x 1/2" | 359504 2 1/2" x 2 1/2" x 3/4" | 359505 2 1/2" x 2 1/2" x 1" |
| 359506 2 1/2" x 2 1/2" x 1 1/4" | 359507 2 1/2" x 2 1/2" x 2" | 359502 3" x 3" x 2" | 359508 4" x 4" x 2" |
| 359509 4" x 4" x 3" | 359510 6" x 6" x 2" | 359511 6" x 6" x 3" | 359512 6" x 6" x 4" |
|
Tee (Soc x Soc x Soc) |
|||
| 359481 1/2" | 359482 3/4" | 359483 1" | 359484 1 1/4" |
| 359485 1 1/2" | 359486 2" | 359487 2 1/2" | 359488 3" |
| 359489 4" | 359490 6" | ||
|
Union (S x S) |
|||
| 359520 1/2" | 359521 3/4" | 359522 1" | 359523 1 1/4" |
| 359524 1 1/2" | 359525 2" | 359526 3" | 359550 4" |
|
Van Stone Style Flange 150 lbs. |
|||
| 359266 1 1/2" | 359267 2" | ||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ ## +++ [G] |
CPVC 41 |
IPEX (Aquarise) |
CSA B137.6 |
|
Flange x Socket |
|||
| 359040 2 1/2" | 359041 3" | 359043 4" | 359042 6" |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings# ¢ +++ [G] |
CPVC 41 |
IPEX (AquaRise) |
CSA B137.6 |
|
Flange x Socket |
|||
| 359228 1/2" | 359229 3/4" | 359230 1" | 359231 1 1/4" |
| 359232 1 1/2" | 359233 2" | 359234 2 1/2" | 359235 3" |
| 359236 4" | 359238 6" | ||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings# +++ [G] |
CPVC 41 |
IPEX |
ASTM F1970 |
|
Union (FPT x FPT) Sch 80 |
|||
| 1/2" - 3" | |||
|
Union (S x S) Sch 80 |
|||
| 1/2" - 3" | |||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
CPVC 41 |
IPEX |
ASTM F1970 |
|
Flange x Socket |
|||
| 059469 2 1/2"* | 059477 3"* | 059358 4"** | 059359 6"** |
* Product tested with metal ring kit for uses in 73°F with a rated pressure of 420 psi. ** Product tested with metal ring kit for uses in 73°F with a rated pressure of 320 psi. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings# +++ [G] |
CPVC 41 |
IPEX |
ASTM F1970 |
|
Flange x Socket |
|||
| 1/2" - 2" | 059234 2 1/2" | 059235 3" | 059236 4" |
| 059238 6" | |||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PVC I-G1 |
IPEX |
ASTM D2466 |
|
45° Ell, S x S |
|||
| 1/2" x 8" | |||
|
90° Elbow, MPT x S |
|||
| 2" | |||
|
90° Elbow, SPG x FPT |
|||
| 2" | |||
|
90° Elbow, SPG x S |
|||
| 2" | |||
|
90° Ell, S x S |
|||
| 1/2" - 8" | G035116 3" | W035526 3" | G035117 4" |
| W035527 4" | |||
|
Cap, S |
|||
| 1/2" - 8" | |||
|
Coupling, S x S |
|||
| 1/2" - 8" | |||
|
Cross, S x S x S x S |
|||
| 1/2" - 4" | |||
|
Female Adapter, S x FPT |
|||
| 1/2" - 6" | |||
|
Male Adapter, S x MPT |
|||
| 1/2" - 6" | |||
|
Reducer Bushing, SPG x S |
|||
| 1/2" x 1/4" x 6" x 4" | |||
|
Reducer Tee, S x S x S |
|||
| 3/4" x 1/2" - 8" x 6" | 035792 3/4" x 3/4" x 1/2" | 035794 1 1/2" | 035795 1 3/4" |
|
Tee, S x S x S |
|||
| 1/2" - 8" | W035778 1 1/4" | G035294 1 1/2" | W035779 1 1/2" |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PVC I-G1 |
IPEX |
ASTM D2467 |
|
45° Elbow, S x S |
|||
| 1/2" - 6" | 536149 2" | ||
|
90° Elbow, S x S |
|||
| 1/2" - 6" | 536186 2" | 536187 2 1/2" | 036188 3" |
| 036189 4" | |||
|
Cap, S |
|||
| 1/2" - 6" | |||
|
Coupling, S x S |
|||
| 1/2" - 8" | |||
|
Cross, S x S x S x S |
|||
| 1/2" - 3" | |||
|
Male Adapter, S x MPT |
|||
| 3/4" - 3" | |||
|
Reducer Bushing, SP x S |
|||
| 3/4" x 1/2" - 4" x 3" | 536611 1 1/2" x 3/4" | ||
|
Reducing Tee, S x S x S |
|||
| 3/4" x 3/4" x 1/2" - 6" x 4" x 4" | |||
|
Tee, S x S x S |
|||
| 1/2" - 6" | 536776 2 1/2" | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings (PW)# + [G] |
PVC I-G1 |
IPEX |
ASTM F1970 |
|
Blind Flange |
|||
| 1/2" - 6" | |||
|
Flange (Socketed) |
|||
| 1/2" - 8" | |||
|
Flange (Threaded) |
|||
| 1" - 6" | |||
|
Vanstone Flange (Socketed) |
|||
| 1 1/2" - 8" | |||
|
Vanstone Flange (Spigot) |
|||
| 1 1/2" - 4" | |||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings# + [G] |
PVC I-G1 |
IPEX |
ASTM F1970 |
|
Union (FPT x FPT) Sch 40 |
|||
| 1/2" - 4" | |||
|
Union (FPT x FPT) Sch 80 |
|||
| 1/2" - 4" | |||
|
Union (S x S) Sch 40 |
|||
| 1/2" - 4" | |||
|
Union (S x S) Sch 80 |
|||
| 1/2" - 4" | |||
# Product tested for uses in 73°F with a rated pressure of 150 psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 534
Processing time was 1 seconds