These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=32680&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Tubing* § +++ [G]

PE / AL / PE

IPEX

ASTM F1282
1"# ¢

1/2"# ¢

3/4"# ¢

5/8"

# Approved for cold and commercial hot end use applications.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing* ¢ § +++ [G]

PE / AL / PE

IPEX

CSA B137.9
1"#

1/2"#

3/4"#

5/8"

# Approved for cold and commercial hot end use applications.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ ^ [G]

HDPE 3608

IPEX Inc

AWWA C906
4" - 12"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ ^ [G]

HDPE 3608/4710

IPEX Inc

ASTM F714
4" - 12"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ ^ ¢ [G]

HDPE 3608/4710

IPEX Inc

CSA B137.1
1/2" - 6"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Facility : L'Assomption, Québec, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe^ ¢ § ** +++ [G]

PEX 5006

Blue 904

ASTM F876/F877
3/4" - 2" SDR 9

^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe^ ¢ § ** +++ [G]

PEX 5006

Blue 904

AWWA C904
3/4" - 2" SDR 9

^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : London, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+ [G]

PVC I-G1

IPEX

ASTM D2466

45° Elbow Sch 40
10" (035926) 12" (035927)

45° Wye Sch 40
3" 4" 6" 6" x 6" x 4"

90° Elbow Sch 40
10" (035928) 12" (035929)

Reducer Bushing Sch 40
10" x 8" (035691)

Tees Sch 40
10" (035930) 12" (035931)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Fittings+ [G]

PVC I-G1

IPEX

ASTM D2467

45º Elbow Sch 80
10" (036862) 12" (036863)

45º Wye Sch 80
3" 4" 6" 6" x 6" x 4"

90º Elbow Sch 80
10" (036864) 12" (036865)

Cap Sch 80
8" (036068)

Reducer Bushing Sch 80
10" x 8" (036270)

Tees Sch 80
10" (036866) 12" (036876)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]

PVC I-G1

IPEX

ASTM D3139

45° Elbow, G x G
2" 2 1/2" 3" 4"
6" 8"

90° Elbow, G x G
2" 2 1/2" 3" 4"
6" 8"

Cross, G x G x G x G
2" 2 1/2" 3" 4"
6"

Male Adapter, G x Male Pipe Thread
1 1/2" 2" 2 1/2" 3"
4" 6"

Permanent Plug Spigot
1 1/2" 2" 2 1/2" 3"
4" 6" 8"

Reducer Bushing, G x SPG
2" x 1 1/2" 2 1/2" x 2" 3" x 2" 3" x 2 1/2"
4" x 2" 4" x 2 1/2" 4" x 3" 6" x 2"
6" x 2 1/2" 6" x 3" 6" x 4" 8" x 4"
8" x 6"

Reducing Tee, G x G x G
2" x 1 1/2" 2 1/2" x 2" 3" x 1 1/2" 3" x 2"
3" x 2 1/2" 4" x 2" 4" x 2 1/2" 4" x 3"
6" x 2" 6" x 2 1/2" 6" x 3" 6" x 4"
8" x 2" 8" x 3" 8" x 4" 8" x 6"

Repair Coupling, G x G
1 1/2" 2" 2 1/2" 3"
4" 6" 8"

Spigot Adapter, G x Spigot
1 1/2" 2" 2 1/2" 3"
4" 6"

Stop Coupling, G x G
1 1/2" 2" 2 1/2" 3"
4" 6" 8"

Tap Coupling, G x G x AWWA Thread
4" x 4" x 3/4" 4" x 4" x 1" 6" x 6" x 3/4" 6" x 6" x 1"
6" x 6" x 2" 8" x 8" x 2"

Tap Service Tee
1 1/2" x 1 1/2" 2" x 1/2" 2" x 3/4" 2" x 1"
2" x 1 1/4" 2" x 1 1/2" 2" x 2" x 1/2" 2 1/2" x 1/2"
2 1/2" x 3/4" 2 1/2" x 1" 2 1/2" x 1 1/4" 2 1/2" x 1 1/2"
2 1/2" x 2" 3" x 1/2" 3" x 3/4" 3" x 1"
3" x 1 1/2" 3" x 2" 4" x 1/2" 4" x 3/4"
4" x 1" 4" x 1 1/4" 4" x 1 1/2" 4" x 2"
6" x 1/2" 6" x 3/4" 6" x 1" 6" x 1 1/4"
6" x 1 1/2" 6" x 2"

Tee, G x G x G
1 1/2" 2" 2 1/2" 3"
4" 6" 8"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]

CPVC IV-G1

IPEX

ASTM F439

45° Elbow Sch 80
10" (059087) 12" (059088)

90° Elbow Sch 80
10" (059085) 12" (059086)

Cap Sch 80
8" (059029)

Reducer Sch 80
10" x 8" (059036)

Tees Sch 80
10" (059062) 12" (059084)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Scarborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]

PVC 1120

IPEX INC@

ASTM D1785
1/2" - 24" Sch 80
1/2" - 24" Sch 40

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ This pipe product is also represented by the trade name XIRTEC140.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : St. Laurent, Québec, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]

PVCO

BIONAX

ASTM F1483
4" - 12" CIOD

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]

PVCO

BIONAX

ASTM F1483
4" - 12" IPS

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]

PVCO

BIONAX

AWWA C909
4" - 12" CIOD

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]

PVCO

BIONAX

AWWA C909
4" - 12" IPS

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Toronto, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+++ [G]

CPVC

AquaRise SR

ASTM F438

SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT
359995 1" x 1" x 1/2"

SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT
359994 3/4" x 3/4" x 1/2"

SST Threaded Fitting: Adapter: Soc x FPT
359997 3/4" x 1/2"

SST Threaded Fitting: Adapter: Soc x FPT
359998 1" x 1/2"

SST Threaded Fitting: Adapter: Sp x FPT
359999 1" x 1/2"

SST Threaded Fitting: Female Adapter: Soc x FPT
359996 1"

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ +++ [G]

CPVC

AquaRise SR

CSA B137.6

SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT
359994 3/4" x 3/4" x 1/2"

SST Threaded Fitting: Adapter Tee: Soc x Soc x FPT
359995 1" x 1" x 1/2"

SST Threaded Fitting: Adapter: Soc x FPT
359997 3/4" x 1/2"

SST Threaded Fitting: Adapter: Soc x FPT
359998 1" x 1/2"

SST Threaded Fitting: Adapter: Sp x FPT
359999 1" x 1/2"

SST Threaded Fitting: Female Adapter: Soc x FPT
359996 1"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]

CPVC

IPEX (AquaRise)

ASTM F438

45° Elbow (Soc x Soc)
359164 1/2" 359165 3/4" 359166 1"

90° Elbow (Soc x Soc)
359194 1/2" 359195 3/4" 359196 1"

90° Street Elbow (S x S)
359175 1/2" 359176 3/4" 359177 1"

Cap (Soc)
359109 1/2" 359110 3/4" 359111 1"

Coupling (Soc x Soc)
359132 1/2" 359133 3/4" 359134 1"

Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"

Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"

Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2" 359376 1" x 1/2" 359377 1" x 3/4"

Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2" 359461 1" x 1/2" 359462 1" x 3/4"

Reducing Tee (S x S x S)
359514 3/4" x 1/2" x 1/2" 359513 3/4" x 1/2" x 3/4" 359492 3/4" x 3/4" x 1/2" 359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"

Tee (Soc x Soc x Soc)
359481 1/2" 359482 3/4" 359483 1"

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]

CPVC

IPEX (AquaRise)

ASTM F439

45° Elbow (Soc x Soc)
359167 1 1/4" 359168 1 1/2" 359169 2" 359170 2 1/2"
359171 3" 359172 4" 359173 6"

90° Elbow (Soc x Soc)
359197 1 1/4" 359198 1 1/2" 359199 2" 359200 2 1/2"
359201 3" 359202 4" 359203 6"

Cap (Soc)
359112 1 1/4" 359113 1 1/2" 359114 2" 359115 2 1/2"
359116 3" 359107 4" 359108 6"

Coupling (Soc x Soc)
359135 1 1/4" 359136 1 1/2" 359137 2" 359138 2 1/2"
359139 3" 359140 4" 359141 6"

Reducer Bushing (Sp x Soc)
359378 1 1/4" x 1/2" 359379 1 1/4" x 3/4" 359380 1 1/4" x 1" 359381 1 1/2" x 1/2"
359382 1 1/2" x 3/4" 359383 1 1/2" x 1" 359384 1 1/2" x 1 1/4" 359385 2" x 1/2"
359386 2" x 3/4" 359387 2" x 1" 359388 2" x 1 1/4" 359389 2" x 1 1/2"
359390 2 1/2" x 3/4" 359391 2 1/2" x 1" 359392 2 1/2" x 2" 359393 3" x 1 1/2"
359394 3" x 2" 359395 3" x 2 1/2" 359428 4" x 1 1 /4" 359429 4" x 1 1/2"
359396 4" x 2" 359430 4" x 2 1/2" 359397 4" x 3" 359398 6" x 2"
359399 6" x 3" 359400 6" x 4"

Reducer Coupling (Soc x Soc)
359463 1 1/4" x 1" 359465 1 1/2" x 1" 359466 1 1/2" x 1 1/4" 359467 2" x 1"
359458 2" x 1 1/2" 359470 3" x 2" 359459 4" x 2" 359472 4" x 3"

Reducing Tee (S x S x S)
359495 1 1/4" x 1 1/4" x 1" 359515 1 1/2" x 1 1/2" x 1/2" 359496 1 1/2" x 1 1/2" x 3/4" 359497 1 1/2" x 1 1/2" x 1"
359498 2" x 2" x 1/2" 359499 2" x 2" x 3/4" 359500 2" x 2" x 1" 359501 2" x 2" x 1 1/2"
359503 2 1/2" x 2 1/2" x 1/2" 359504 2 1/2" x 2 1/2" x 3/4" 359505 2 1/2" x 2 1/2" x 1" 359506 2 1/2" x 2 1/2" x 1 1/4"
359507 2 1/2" x 2 1/2" x 2" 359502 3" x 3" x 2" 359508 4" x 4" x 2" 359509 4" x 4" x 3"
359510 6" x 6" x 2" 359511 6" x 6" x 3" 359512 6" x 6" x 4"

Tee (Soc x Soc x Soc)
359484 1 1/4" 359485 1 1/2" 359486 2" 359487 2 1/2"
359488 3" 359489 4" 359490 6"

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]

CPVC 41

IPEX (AquaRise)

ASTM F1970

Union (S x S)
359550 4" 359520 1/2" 359521 3/4" 359522 1"
359523 1 1/4" 359524 1 1/2" 359525 2" 359526 3"

Van Stone Style Flange 150 lbs.
359266 1 1/2" 359267 2"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings## +++ [G]

CPVC 41

IPEX (Aquarise)

ASTM F1970

Flange x Socket
359040 2 1/2" 359041 3" 359043 4" 359042 6"

## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]

CPVC 41

IPEX (AquaRise)

ASTM F1970

Flange x Socket
359228 1/2" 359229 3/4" 359230 1" 359231 1 1/4"
359232 1 1/2" 359233 2" 359234 2 1/2" 359235 3"
359236 4" 359238 6"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ +++ [G]

CPVC

IPEX (AquaRise)

CSA B137.6

45° Elbow (Soc x Soc)
359164 1/2" 359165 3/4" 359166 1" 359167 1 1/4"
359168 1 1/2" 359169 2" 359170 2 1/2" 359171 3"
359172 4" 359173 6"

90° Elbow (Soc x Soc)
359194 1/2" 359195 3/4" 359196 1" 359197 1 1/4"
359198 1 1/2" 359199 2" 359200 2 1/2" 359201 3"
359202 4" 359203 6"

90° Street Elbow (S x S)
359175 1/2" 359176 3/4" 359177 1"

Cap (Soc)
359109 1/2" 359110 3/4" 359111 1" 359112 1 1/4"
359113 1 1/2" 359114 2" 359115 2 1/2" 359116 3"
359107 4" 359108 6"

Coupling (Soc x Soc)
359132 1/2" 359133 3/4" 359134 1" 359135 1 1/4"
359136 1 1/2" 359137 2" 359138 2 1/2" 359139 3"
359140 4" 359141 6"

Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"

Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"

Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2" 359376 1" x 1/2" 359377 1" x 3/4" 359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4" 359380 1 1/4" x 1" 359381 1 1/2" x 1/2" 359382 1 1/2" x 3/4"
359383 1 1/2" x 1" 359384 1 1/2" x 1 1/4" 359385 2" x 1/2" 359386 2" x 3/4"
359387 2" x 1" 359388 2" x 1 1/4" 359389 2" x 1 1/2" 359390 2 1/2" x 3/4"
359391 2 1/2" x 1" 359392 2 1/2" x 2" 359393 3" x 1 1/2" 359394 3" x 2"
359395 3" x 2 1/2" 359428 4" x 1 1 /4" 359429 4" x 1 1/2" 359396 4" x 2"
359430 4" x 2 1/2" 359397 4" x 3" 359398 6" x 2" 359399 6" x 3"
359400 6" x 4"

Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2" 359461 1" x 1/2" 359462 1" x 3/4" 359463 1 1/4" x 1"
359465 1 1/2" x 1" 359466 1 1/2" x 1 1/4" 359467 2" x 1" 359458 2" x 1 1/2"
359470 3" x 2" 359459 4" x 2" 359472 4" x 3"

Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4" 359514 3/4" x 1/2" x 1/2" 359492 3/4" x 3/4" x 1/2" 359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4" 359495 1 1/4" x 1 1/4" x 1" 359515 1 1/2" x 1 1/2" x 1/2" 359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1" 359498 2" x 2" x 1/2" 359499 2" x 2" x 3/4" 359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2" 359503 2 1/2" x 2 1/2" x 1/2" 359504 2 1/2" x 2 1/2" x 3/4" 359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4" 359507 2 1/2" x 2 1/2" x 2" 359502 3" x 3" x 2" 359508 4" x 4" x 2"
359509 4" x 4" x 3" 359510 6" x 6" x 2" 359511 6" x 6" x 3" 359512 6" x 6" x 4"

Tee (Soc x Soc x Soc)
359481 1/2" 359482 3/4" 359483 1" 359484 1 1/4"
359485 1 1/2" 359486 2" 359487 2 1/2" 359488 3"
359489 4" 359490 6"

Union (S x S)
359520 1/2" 359521 3/4" 359522 1" 359523 1 1/4"
359524 1 1/2" 359525 2" 359526 3" 359550 4"

Van Stone Style Flange 150 lbs.
359266 1 1/2" 359267 2"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ ## +++ [G]

CPVC 41

IPEX (Aquarise)

CSA B137.6

Flange x Socket
359040 2 1/2" 359041 3" 359043 4" 359042 6"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# ¢ +++ [G]

CPVC 41

IPEX (AquaRise)

CSA B137.6

Flange x Socket
359228 1/2" 359229 3/4" 359230 1" 359231 1 1/4"
359232 1 1/2" 359233 2" 359234 2 1/2" 359235 3"
359236 4" 359238 6"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]

CPVC 41

IPEX

ASTM F1970

Union (FPT x FPT) Sch 80
1/2" - 3"

Union (S x S) Sch 80
1/2" - 3"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]

CPVC 41

IPEX

ASTM F1970

Flange x Socket
059469 2 1/2"* 059477 3"* 059358 4"** 059359 6"**

* Product tested with metal ring kit for uses in 73°F with a rated pressure of 420 psi.
** Product tested with metal ring kit for uses in 73°F with a rated pressure of 320 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]

CPVC 41

IPEX

ASTM F1970

Flange x Socket
1/2" - 2" 059234 2 1/2" 059235 3" 059236 4"
059238 6"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]

PVC I-G1

IPEX

ASTM D2466

45° Ell, S x S
1/2" x 8"

90° Elbow, MPT x S
2"

90° Elbow, SPG x FPT
2"

90° Elbow, SPG x S
2"

90° Ell, S x S
1/2" - 8" G035116 3" W035526 3" G035117 4"
W035527 4"

Cap, S
1/2" - 8"

Coupling, S x S
1/2" - 8"

Cross, S x S x S x S
1/2" - 4"

Female Adapter, S x FPT
1/2" - 6"

Male Adapter, S x MPT
1/2" - 6"

Reducer Bushing, SPG x S
1/2" x 1/4" x 6" x 4"

Reducer Tee, S x S x S
3/4" x 1/2" - 8" x 6" 035792 3/4" x 3/4" x 1/2" 035794 1 1/2" 035795 1 3/4"

Tee, S x S x S
1/2" - 8" W035778 1 1/4" G035294 1 1/2" W035779 1 1/2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]

PVC I-G1

IPEX

ASTM D2467

45° Elbow, S x S
1/2" - 6" 536149 2"

90° Elbow, S x S
1/2" - 6" 536186 2" 536187 2 1/2" 036188 3"
036189 4"

Cap, S
1/2" - 6"

Coupling, S x S
1/2" - 8"

Cross, S x S x S x S
1/2" - 3"

Male Adapter, S x MPT
3/4" - 3"

Reducer Bushing, SP x S
3/4" x 1/2" - 4" x 3" 536611 1 1/2" x 3/4"

Reducing Tee, S x S x S
3/4" x 3/4" x 1/2" - 6" x 4" x 4"

Tee, S x S x S
1/2" - 6" 536776 2 1/2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings (PW)# + [G]

PVC I-G1

IPEX

ASTM F1970

Blind Flange
1/2" - 6"

Flange (Socketed)
1/2" - 8"

Flange (Threaded)
1" - 6"

Vanstone Flange (Socketed)
1 1/2" - 8"

Vanstone Flange (Spigot)
1 1/2" - 4"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# + [G]

PVC I-G1

IPEX

ASTM F1970

Union (FPT x FPT) Sch 40
1/2" - 4"

Union (FPT x FPT) Sch 80
1/2" - 4"

Union (S x S) Sch 40
1/2" - 4"

Union (S x S) Sch 80
1/2" - 4"

# Product tested for uses in 73°F with a rated pressure of 150 psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 530
Processing time was 1 seconds