These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=33450&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Nibco Inc. |  |
| World Headquarters | |
| 1516 Middlebury Street | |
| Elkhart, IN 46516-4740 | |
| United States | |
| 574-295-3000 | |
| Visit this company's website |
Facility : # 1 China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Valves (PW)+ @ [G] |
PVC I-G1 |
NIBCO |
ASTM F1970 |
|
Compact Ball Valves - Solvent Weld |
|||
| 4660-S 1/2" thru 2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves (PW)+ @ [G] |
PVC I-G1 |
NIBCO |
ASTM F1970 |
|
Compact Ball Valves - Threaded |
|||
| 4660-T 1/2" thru 2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Greensboro, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
NIBCO |
ASTM D2466 |
|
45° Ells Sch 40 |
|||
| 4606 (417) | |||
|
90° Ells Sch 40 |
|||
| 4607 (406) | 4607-2 (409) | 4607-2-3 (411) | 4607-3 (407) |
| 4607-3-3 (408) | 4607-3-4 (412) | 4607-4 (410) | |
|
Adapters Sch 40 |
|||
| 4603 (435) | 4603-2 (478) | 4604 (436) | |
|
Bushings Sch 40 |
|||
| 4618 (437) | 4618-3 (438) | ||
|
Caps Sch 40 |
|||
| 4617 (447) | 4617-3 (448) | ||
|
Couplings Sch 40 |
|||
| 4601 (429) | 4601-3-3 (430) | ||
|
Plugs Sch 40 |
|||
| 4616 (449) | 4616-4 (450) | ||
|
Tees Sch 40 |
|||
| 4611 (401) | 4612 (402) | 4612-3-3 (405) | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Jerome, ID
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
Nibco |
ASTM D2466 |
|
Tees |
|||
| 401-100 10" | 401-120 12" | ||
|
90° Ells |
|||
| 406-100 10" | 406-120 12" | ||
|
45° Ells |
|||
| 417-100 10" | 417-120 12" | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Charlestown, IN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ ### |
CPVC |
NIBCO |
ASTM F1970 |
|
5033-E Union, Socket[G] |
|||
| 3/4" | 1" | ||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
### Product tested for use in hot water (150°F) applications with a rated pressure of 175
psi.
|
|||
Fittings+ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM D2464 |
|
45° Ell Sch 80 |
|||
| 4506-3-3 | |||
|
90° Ell Sch 80 |
|||
| 4507-3-3 | |||
|
Adapters Sch 80 |
|||
| 4503 | 4504 | ||
|
Bushings Sch 80 |
|||
| 4518-3 | 4518-3-4 | ||
|
Cap Sch 80 |
|||
| 4517-3 | |||
|
Coupling Sch 80 |
|||
| 4501-3-3 | |||
|
Plug Sch 80 |
|||
| 4516-4 | |||
|
Tee Sch 80 |
|||
| 4512-3-3 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM D2467 |
|
45° Ell Sch 80 |
|||
| 4506 | |||
|
90° Ell Sch 80 |
|||
| 4507 | |||
|
Adapter Sch 80 |
|||
| 4504 | 4503 | ||
|
Bushings Sch 80 |
|||
| 4518 | 4518-3 | ||
|
Cap Sch 80 |
|||
| 4517 | |||
|
Coupling Sch 80 |
|||
| 4501 | |||
|
Tee Sch 80 |
|||
| 4511 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F439 |
|
45° Ell Sch 80 |
|||
| 5106 | 5106-3-3 | ||
|
90° Ell Sch 80 |
|||
| 5107 | 5107-3 | 5107-3-3 | |
|
Adapters Sch 80 |
|||
| 5103 | 5104 | ||
|
Bushing Sch 80 |
|||
| 5118 | 5118-3 | 5118-3-4 | |
|
Cap Sch 80 |
|||
| 5117 | 5117-3 | ||
|
Coupling Sch 80 |
|||
| 5101 | 5101-3-3 | ||
|
Plug Sch 80 |
|||
| 5116-4 | |||
|
Tee Sch 80 |
|||
| 5111 | 5112 | 5112-3-3 | |
* Except 4" Sch 80 socket end caps
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves# +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F1970 |
|
Butterfly Valves |
|||
| Model B-EPDM W51BF-E-NO 3" | Model B-EPDM W51BF-E-LH 3" | ||
|
Single-Union Ball Valve - FPM |
|||
| S51SU-V 1/2" - 2" | T51SU-V 1/2" - 2" | F51SU-V 1/2" - 2" | |
|
Single-Union Ball Valves - EPDM |
|||
| S51SU-E 1/2" - 2" | T51SU-E 1/2" - 2" | F51SU-E 1/2" - 2" | |
|
True Union Ball Valves - FPM |
|||
| U51TB-V 1/2" - 2" | S51TB-V 3" - 6" | T51TB-V 3" - 4" | F51TB-V 1/2" - 6" |
|
True-Union Ball Check, Foot, and Vent Valves - FPM |
|||
| U51BC-V 1/2" - 2" | S51BC-V 3" - 4" | T51BC-V 3" - 4" | F51BC-V 1/2" - 4" |
|
True-Union Ball Check, Foot, and Vent Valves- EPDM |
|||
| U51BC-E 1/2" - 2" | S51BC-E 3" - 4" | T51BC-E 3" - 4" | F51BC-E 1/2" - 4" |
|
True-Union Ball Valves - EPDM |
|||
| U51TB-E 1/2" - 2" | S51TB-E 3" - 6" | T51TB-E 3" - 4" | F51TB-E 1/2" - 6" |
|
True-Union Diverter Ball Valves-EPDM@@@ |
|||
| S51D2-E 1/2" - 2" | T51D2-E 1/2" - 2" | F51D2-E 1/2" - 2" | |
|
True-Union Diverter Ball Valves-FPM@@@ |
|||
| S51D2-V 1/2" - 2" | T51D2-V 1/2" - 2" | F51D2-V 1/2" - 2" | |
|
True-Union Multiport Ball Valves-EPDM@@ |
|||
| S51M3-E 1/2" - 2" | T51M3-E 1/2" - 2" | F51M3-E 1/2" - 2" | |
|
True-Union Multiport Ball Valves-FPM@@ |
|||
| S51M3-V 1/2" - 2" | T51M3-V 1/2" - 2" | F51M3-V 1/2" - 2" | |
@@@ 3-Way/2-Position @@ 3-Way/3-Position # Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings (PW)# +++ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM F1970 |
|
45° Ell, Flanged |
|||
| 4506-12 | |||
|
90° Ell, Flanged |
|||
| 4507-12 | |||
|
Blind Flange |
|||
| 4519 | |||
|
Socket Flange |
|||
| 4551 | |||
|
Tee, Flanged |
|||
| 4511-12 | |||
|
Threaded Flange |
|||
| 4551-3 | |||
|
Union, Socket |
|||
| 4533 | |||
|
Union, Socket and Threaded |
|||
| 4533-3 | |||
|
Union, Threaded |
|||
| 4533-3-3 | |||
# Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves## +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F1970 |
|
True-Union Ball Valves - EPDM |
|||
| U51TB-E 1/2" - 2" | |||
|
True-Union Ball Valves - FPM |
|||
| U51TB-V 1/2" - 2" | |||
## Product tested for use in cold water (73°F) applications with a rated pressure of 250
PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves (PW)# +++ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM F1970 |
|
Angle Valves-FPM |
|||
| T45AC-V 1/4" - 1" | |||
|
Butterfly Valves |
|||
| Model B-EPDM W45BF-E-NO 4" - 6" | Model B-EPDM W45BF-E-LH 4" - 6" | Model B-EPDM W45BF-E-GO 4" - 6" | Model C-EPDM W45BG-E-3 2" - 8" |
| Model C-EPDM W45BG-E-5 2" - 10" | |||
|
Calibrated Needle Valves-FPM |
|||
| T45CN-V 1/4" | |||
|
Chemcock Valves-FPM |
|||
| A45CC-V 1/4" | M45CC-V 1/4" | ||
|
Single-Union Ball Valves-EPDM |
|||
| S45SU-V 1/2" - 2" | T45SU-V 1/2" - 2" | F45SU-V 1/2" - 2" | |
|
Single-Union Ball Valves-FPM |
|||
| S45SU-V 1/2" - 2" | T45SU-V 1/2" - 2" | F45SU-V 1/2" - 2" | |
|
True-Union Ball Check, Foot, and Vent Valve-FPM |
|||
| U45BC-V 1/2" - 2" | S45BC-V 3" - 4" | T45BC-V 3" - 4" | F45BC-V 1/2" - 4" |
|
True-Union Ball Check, Foot, and Vent Valves-EPDM |
|||
| U45BC-E 1/2" - 2" | S45BC-E 3" - 4" | T45BC-E 3" - 4" | F45BC-E 1/2" - 4" |
|
True-Union Ball Valves-EPDM |
|||
| U45TB-E 1/2" - 2" | S45TB-E 3" - 6" | T45TB-E 3" - 4" | F45TB-E 1/2" - 6" |
|
True-Union Ball Valves-FPM |
|||
| U45TB-V 1/2" - 2" | S45TB-V 3" - 6" | T45TB-V 3" - 4" | F45TB-V 1/2" - 6" |
|
True-Union Diverter Ball Valves-EPDM@@@ |
|||
| S45D2-E 1/2" - 2" | T45D2-E 1/2" - 2" | F45D2-E 1/2" - 2" | |
|
True-Union Diverter Ball Valves-FPM@@@ |
|||
| S45D2-V 1/2" - 2" | T45D2-V 1/2" - 2" | F45D2-V 1/2" - 2" | |
|
True-Union Multiport Ball Valves-EPDM |
|||
| S45M3-E 1/2" - 2" | T45M3-E 1/2" - 2" | F45M3-E 1/2" - 2" | |
|
True-Union Multiport Ball Valves-FPM@@ |
|||
| S45M3-V 1/2" - 2" | T45M3-V 1/2" - 2" | F45M3-V 1/2" - 2" | |
|
Y-Pattern Valves-FPM |
|||
| T45YP-V 1/4" - 1" | |||
@@@ 3-Way/2-Position @@ 3-Way/3-Position # Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves (PW)## +++ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM F1970 |
|
True-Union BAll Valves - EPDM |
|||
| U45TB-V 1/2" - 2" | |||
|
True-Union BAll Valves - FPM |
|||
| U45TB-E 1/2" - 2" | |||
## Product tested for use in cold water (73°F) applications with a rated pressure of 250
PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings (PW)# +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F1970 |
|
45° Ell, Flanged |
|||
| 5106-12 | |||
|
90° Ell, Flanged |
|||
| 5107-12 | |||
|
Blind Flange |
|||
| 5119-S | 5119-W | ||
|
Socket Flange |
|||
| 5151-S | 5151-W | ||
|
Tee, Flanged |
|||
| 5111-112 | |||
|
Thread Flange |
|||
| 5151-3-S | 5151-3-W | ||
|
Union, Threaded |
|||
| 5133-3-3 | |||
|
Union, socket |
|||
| 5133 | |||
|
Union, socket and Threaded |
|||
| 5133-3 | |||
# Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F438 |
|
5001 Coupling |
|||
| 3/4" | 1" | 1 1/4" | |
|
5001-G Grooved Adapter |
|||
| 1 1/4" | |||
|
5001R Coupling |
|||
| 1 1/2" x 3/4' | 1 1/2" x 1 1/4" | 2" x 1" | |
|
5001R Reducer Coupling |
|||
| 1" x 3/4" | 1 1/4" x 1" | ||
|
5006 45° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007 90° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007R 90° Reducing Elbow |
|||
| 1" x 3/4" | |||
|
5011 Tee |
|||
| 3/4" | 1" | 1 1/4" | |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1" x 3/4" | 1 1/4" x 1" x 1" | 1 1/4" x 1" x 1 1/4" | 1 1/4" x 1 1/4" x 3/4" |
| 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1 1/4" | 2" x 2" x 1" | ||
|
5011R Tee |
|||
| 3/4" x 3/4" x 1" | 1" x 3/4" x 3/4" | 1" x 3/4" x 1" | 1" x 1" x 3/4" |
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1 1/4" | ||
|
5017 Cap |
|||
| 3/4" | 1" | 1 1/4" | |
|
5018 Bushing |
|||
| 1 1/4" x 3/4" | 1 1/4" x 1" | ||
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | |||
|
5018 Reducer Bushing |
|||
| 1" x 3/4" | |||
|
5019-H Blind Flange |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035 Cross |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035R Reducing Cross |
|||
| 1" X 3/4" | |||
|
5051-H Flange |
|||
| 3/4" | 1" | 1 1/4" | |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ [1] |
MLTPL |
NIBCO |
ASTM F438 |
|
5003-S-BT Brastic Sprinkler Head Adapter SocxFIPT[G] |
|||
| 3/4" x 1/2" | |||
|
5003-S-BT Brastic Sprinkler Head Adapter SocxFIPT[G] |
|||
| 1" x 1/2" | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [1] Certified for a maximum use of one sprinkler head per eight feet of piping. |
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F439 |
|
5001 Coupling |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001-G Grooved Adapter |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001R Coupling |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1" |
| 2" x 1 1/2" | |||
|
5006 45° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5007 90° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011 Tee |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 3/4" |
| 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1" | 2" x 2" x 1 1/4" | 2" x 2" x 1 1/2" | |
|
5011R Tee |
|||
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 2" | 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 1 1/2" |
| 3" x 3" x 1 1/2" | 3" x 3" x 2" | 3" x 3" x 2 1/2" | |
|
5017 Cap |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5018 Bushing |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 3/4" |
| 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1 1/2" | 2 1/2" x 2" | 3" x 2" | 3" x 2 1/2" |
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | 3" x 1 1/2" | ||
|
5019-H Blind Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5035 Cross |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5051-2-A Flange - Van Stone |
|||
| 3" | |||
|
5051-A Flange - Van Stone |
|||
| 3" | |||
|
5051-H Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings[G] |
CPVC |
NIBCO |
SE 8817 |
|
5001-G-M Grooved Adapter |
|||
| 65mm x 2 1/2" | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings[G] |
CPVC |
Nibco |
SE 8459 |
|
45° Ell Sch 80 |
|||
| 5106 | |||
|
90° Ell Sch 80 |
|||
| 5107 | |||
|
Adapter Sch 80 |
|||
| 5103 | 5104 | ||
|
Bushing Sch 80 |
|||
| 5118 | |||
|
Cap Sch 80 |
|||
| 5117 | |||
|
Coupling Sch 80 |
|||
| 5101 | |||
|
Tee Sch 80 |
|||
| 5111 | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Goshen, IN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
NIBCO |
ASTM D2466 |
|
45° Ell Sch 40 |
|||
| 4606 (417) | |||
|
90° Ell Sch 40 |
|||
| 4607 (406) | 4607-2 (409) | 4607-2-3 (411) | 4607-3 (407) |
| 4607-3-3 (408) | 4607-3-4 (412) | 4607-4 (410) | |
|
Adapters Sch 40 |
|||
| 4603 (435) | 4603-2 (478) | 4604 (436) | |
|
Bushings Sch 40 |
|||
| 4618 (437) | 4618-3 (438) | ||
|
Caps Sch 40 |
|||
| 4617 (447) | 4617-3 (448) | ||
|
Couplings Sch 40 |
|||
| 4601 (429) | 4601-3-3 (430) | ||
|
Plugs Sch 40 |
|||
| 4616 (449) | 4616-4 (450) | ||
|
Tees Sch 40 |
|||
| 4611 (401) | 4612 (402) | 4612-3-3 (405) | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ### |
CPVC |
NIBCO |
ASTM F1970 |
|
5033-E Union, Socket[G] |
|||
| 3/4" | 1" | ||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
### Product tested for use in hot water (150°F) applications with a rated pressure of 175
psi.
|
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F438 |
|
5001 Coupling |
|||
| 3/4" | 1" | 1 1/4" | |
|
5001-G Grooved Adapter |
|||
| 1 1/4" | |||
|
5001R Coupling |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1 1/4" | 2" x 1" | |
|
5001R Reducer Coupling |
|||
| 1" x 3/4" | 1 1/4" x 1" | ||
|
5006 45° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007 90° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007R 90° Reducing Elbow |
|||
| 1" x 3/4" | |||
|
5011 Tee |
|||
| 3/4" | 1" | 1 1/4" | |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1" x 3/4" | 1 1/4" x 1" x 1" | 1 1/4" x 1" x 1 1/4" | 1 1/4" x 1 1/4" x 3/4" |
| 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1 1/4" | 2" x 2" x 1" | ||
|
5011R Tee |
|||
| 3/4" x 3/4" x 1" | 1" x 3/4" x 3/4" | 1" x 3/4" x 1" | 1" x 1" x 3/4" |
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1 1/4" | ||
|
5017 Cap |
|||
| 3/4" | 1" | 1 1/4" | |
|
5018 Bushing |
|||
| 1 1/4" x 3/4" | 1 1/4" x 1" | ||
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | |||
|
5018 Reducer Bushing |
|||
| 1" x 3/4" | |||
|
5019-H Blind Flange |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035 Cross |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035R Reducing Cross |
|||
| 1" X 3/4" | |||
|
5051-H Flange |
|||
| 3/4" | 1" | 1 1/4" | |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F439 |
|
5001 Coupling |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001-G Grooved Adapter |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001R Coupling |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1" |
| 2" x 1 1/2" | |||
|
5006 45° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5007 90° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011 Tee |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 3/4" |
| 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1" | 2" x 2" x 1 1/4" | 2" x 2" x 1 1/2" | |
|
5011R Tee |
|||
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 2" | 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 1 1/2" |
| 3" x 3" x 1 1/2" | 3" x 3" x 2" | 3" x 3" x 2 1/2" | |
|
5017 Cap |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5018 Bushing |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 3/4" |
| 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1 1/2" | 2 1/2" x 2" | 3" x 2" | 3" x 2 1/2" |
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | 3" x 1 1/2" | ||
|
5019-H Blind Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5035 Cross |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5051-2-A Flange - Van Stone |
|||
| 3" | |||
|
5051-A Flange - Van Stone |
|||
| 3" | |||
|
5051-H Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings (PW)§ ** +++ [G] |
CPVC 41* |
NIBCO |
ASTM F1970 |
|
4703 CT |
|||
| 1/2" and 3/4" | |||
|
4704 CT |
|||
| 1/2" and 3/4" | |||
* Copper C12200
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Product tested for use in hot water (180°F) applications with a rated pressure of 100
PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
CPVC 41 |
NIBCO |
ASTM D2846 |
|
45° Ell |
|||
| 4706 | |||
|
45° Street Elbow |
|||
| 4706-2 | |||
|
90° Drop Ear Ell, Slip x Slip |
|||
| 1/2" 4707-5 | |||
|
90° Ell |
|||
| 4707 | |||
|
90° Street Elbow |
|||
| 4707-2 | |||
|
Bushing |
|||
| 4718 | |||
|
Cap |
|||
| 4717 | |||
|
Coupling |
|||
| 4701 | |||
|
Male Adapter |
|||
| 4704 | |||
|
Tee |
|||
| 4711 | |||
|
Transition Bushing |
|||
| 4718-T | |||
|
Transition Coupling |
|||
| 4701-T | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings% ˘ § +++ [G] |
CPVC 41 |
NIBCO |
ASTM D2846 |
|
90° Drop Ear Ell, Slip x FIPT |
|||
| 1/2" 4707-3-5 | |||
|
Adapter |
|||
| 4703 | |||
% Product is Certified for use as a non-repeating fitting, not Certified when installed
within 30-feet of any other transition fitting.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ +++ [G] |
CPVC 41 |
NIBCO |
CSA B137.6 |
|
45° Ell |
|||
| 4706 | |||
|
45° Street Elbow |
|||
| 4706-2 | |||
|
90° Drop Ear Ell, Slip x Slip |
|||
| 1/2" 4707-5 | |||
|
90° Ell |
|||
| 4707 | |||
|
90° Street Elbow |
|||
| 4707-2 | |||
|
Bushing |
|||
| 4718 | |||
|
Cap |
|||
| 4717 | |||
|
Coupling |
|||
| 4701 | |||
|
Male Adapter |
|||
| 4704 | |||
|
Tee |
|||
| 4711 | |||
|
Transition Bushing |
|||
| 4718-T | |||
|
Transition Coupling |
|||
| 4701-T | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings% ˘ +++ [G] |
CPVC 41 |
NIBCO |
CSA B137.6 |
|
90° Drop Ear Ell, Slip x FIPT |
|||
| 1/2" 4707-3-5 | |||
|
Adapter |
|||
| 4703 | |||
% Product is Certified for use as a non-repeating fitting, not Certified when installed
within 30-feet of any other transition fitting.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings[G] |
CPVC |
NIBCO |
SE 8817 |
|
5001-G-M Grooved Adapter |
|||
| 65 mm x 2 1/2" | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Lebanon, OH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Manifold@ ^ § ++ [G] |
MLTPL |
NIBCO PEX Home Run Manifold |
ASTM F877 |
|
PM6-P-LF |
|||
| 1" | |||
|
PM12-P-LF |
|||
| 1" | |||
|
PH8-LF |
|||
| 3/4" | |||
|
PM12-LF |
|||
| 3/4" | |||
|
PH40D-LF |
|||
| 3/4" | |||
|
PH32D-LF |
|||
| 3/4" | |||
|
PH24D-LF |
|||
| 3/4" | |||
|
PH16D-LF |
|||
| 3/4" | |||
|
PH16-LF |
|||
| 3/4" | |||
|
PM6-LF |
|||
| 3/4" | 1" | ||
|
PH16-LF |
|||
| 1" | |||
|
PH32D-LF |
|||
| 1" | |||
|
PH8-LF |
|||
| 1" | |||
|
PH40D-LF |
|||
| 1" | |||
|
PH24D-LF |
|||
| 1" | |||
|
PH16D-LF |
|||
| 1" | |||
|
PM12-LF |
|||
| 1" | |||
|
PH16D-LF |
|||
| 1 1/4" | |||
|
PH24D-LF |
|||
| 1 1/4" | |||
|
PH32D-LF |
|||
| 1 1/4" | |||
|
PH40D-LF |
|||
| 1 1/4" | |||
|
PH16-LF |
|||
| 1 1/4" | |||
|
PH8-LF |
|||
| 1 1/4" | |||
@ Certified for manifolds without ball valves.
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Stuarts Draft, VA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings! § ż +++ [G] |
MLTPL |
NIBCO |
ASTM F1807 |
|
PC604P Pex x Press Adapter |
|||
| 1" x 1" | 1/2" x 1/2" | 1/2" x 3/4" | 3/4" x 1/2" |
| 3/4" x 3/4" | |||
! Product is exempt from bearing the PS 117 and/or CSA MSE 13 performance standard(s).
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
ż All Listed Products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings! § ż +++ [G] |
MLTPL |
NIBCO |
ASTM F877 |
|
PC604P Pex x Press Adapter |
|||
| 1" x 1" | 1/2" x 1/2" | 1/2" x 3/4" | 3/4" x 1/2" |
| 3/4" x 3/4" | |||
! Product is exempt from bearing the PS 117 and/or CSA MSE 13 performance standard(s).
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
ż All Listed Products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings! § ż +++ [G] |
MLTPL |
NIBCO |
CSA B137.5 |
|
PC604P Pex x Press Adapter |
|||
| 1" x 1" | 1/2" x 1/2" | 1/2" x 3/4" | 3/4" x 1/2" |
| 3/4" x 3/4" | |||
! Product is exempt from bearing the PS 117 and/or CSA MSE 13 performance standard(s).
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
ż All Listed Products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : B China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ˘ § [G] |
Brass C69300 |
NIBCO |
ASTM F1807 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F -LF 1/2" x 3/4" | NP23F-LF 1/2" x 1/2" | NP23F -LF 5/8" x 3/4" | NP23F -LF 1 1/4" x 1 1/4" |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 1/2" Bag of 2 | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" |
| NP26B-LF 3/4" x 3/4" Bag of 1 | NP26B-LF 1" x 1" | NP26B-LF 1 1/4" X 1" | NP26B-LF 1 1/4" X 1 1/4" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1" x 3/4" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 1/2" Bag of 2 | NP25B-LF 1/2" x 3/4" | NP25B-LF 1/2" x 3/4" Bag of 1 |
| NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 1/2" Bag of 1 | NP25B-LF 3/4" x 3/4" | NP25B-LF 3/4" x 1" |
| NP25B-LF 3/4" x 3/4" Bag of 1 | NP25B-LF 1" x 3/4" | NP25B-LF 1" x 1" | NP25B-LF 1 1/4" x 1 1/4" |
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 1/2" x 1/2" Bag of 1 | NP25B-LF 5/8" x 3/4" | NP25B-LF 1" x 3/4" |
| NP25B-LF 3/4" x 1" | NP25B-LF 1 1/4" x 1 1/4" | ||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01R-LF 1/2" x 3/8" | NP01-LF 1/2" X 1/2" | NP01-LF 1/2" X 1/2" Bag of 2 |
| NP01-LF 1/2" x 1/2" Bag of 50 | NP01-LF 5/8" | NP01R-LF 3/4" X 1/2" | NP01R-LF 3/4" X 1/2" Bag of 2 |
| NP01-LF 3/4" x 3/4" | NP01-LF 3/4" X 3/4" Bag of 2 | NP01-LF 1" | NP01R-LF 1" X 3/4" |
| NP01-LF 1 1/4" | NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | |
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 1/2" X 1/2" Bag of 1 | NP28-LF 3/4" X 1/2" | NP28-LF 3/4" X 3/4" |
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 3/8" x 1/2" | NP28-LF 3/4" x 1/2" | NP28-LF 3/4" |
| NP28TB-LT 1/2" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F -LF 3/8" x 1/2" | NP22F -LF 1/2" x 1/2" | NP22F -LF 3/4" x 3/4" | NP22F -LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP07-LF 1/2" Bag of 2 | NP25BE-LF 1/2" x 1/2" | NP25BE-LF 1/2" X 1/2" Bag of 1 | NP25BE-LF 1/2" X 3/4" |
| NP07-LF 3/4" Bag of 2 | NP07-LF 3/4" | NP07R-LF 3/4" x 1/2" | NP07R-LF 3/4" x 1/2" Bag of 2 |
| NP25BE-LF 3/4" X 3/4" | NP07-LF 1" | ||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1/2" | NP07-LF 1 1/4" | |
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 1/2" X 1/2" Bag of 2 | NP23F-LF 3/4" x 3/4" | NP23F-LF 3/4" X 3/4" Bag of 2 |
| NP23F-LF 1" x 1" | NP23F-LF 1 1/4" X 1 1/4" | ||
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 1/2" x 1/2" Bag of 2 | NP23-LF 3/4" x 3/4" | NP23-LF 3/4" x 3/4" Bag of 2 |
| NP23-LF 1" X 1" | NP23-LF 1 1/4" X 1 1/4" | ||
|
PB Transition Coupling |
|||
| NP29R-LF 1/2" | NP29R-LF 3/4" | NP29R-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 1/2" Bag of 2 | NP18-LF 3/4" | NP18-LF 3/4" Bag of 2 |
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 3/4" | NP18-LF 1" | NP18-LF 1 1/4" |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x NPSM) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | NP26BS-LF 3/4" | |
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP26PS-LF 1/2" X 1/2" | NP27-LF 1/2" x 1/2" | NP26PS-LF 1/2" x 1/2" Bag of 2 |
|
Swivel Closet Adapter (PEX x Straight) |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x FIP) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | NP27B-LF 1/2" x 1/2" | |
|
Swivel Elbow with Plastic Nut (PEX x FIP) |
|||
| NP27-LF 3/8" x 1/2" | |||
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27P-LF 1/2" X 1/2" | NP27P-LF 1/2" X 1/2" Bag of 2 | NP27SE-LF 3/8" x 1/2" | |
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" | NP11-LF 1/2" Bag of 2 |
| NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 1/2" X 1/2" X 3/4" | NP11R-LF 1/2" X 1/2" X 3/4" Bag of 1 | NP11-LF 3/4" |
| NP11-LF 3/4" Bag of 2 | NP11R-LF 3/4" X 1/2" X 1/2" | NP11R-LF 3/4" X 1/2" X 3/4" | NP11R-LF 3/4" X 3/4" X 1/2" |
| NP11R-LF 3/4" X 3/4" X 1/2" Bag of 1 | NP11R-LF 3/4" x 3/4" x 1" | NP11-LF 1" | NP11R-LF 1" x 3/4" x 3/4" |
| NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 1" x 1/2" | NP11R-LF 1" X 1" X 3/4" | NP11R-LF 1" x 1/2" x 3/4" |
| NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 1/2" | NP11-LF 1 1/4" | NP11R-LF 1 1/4" x 1 1/4" x 1" |
| NP11R-LF 1 1/4" x 1" x 1" | |||
@ These fittings meet all the requirements under F1807 and F877.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings@ ˘ § ++ [G] |
Brass C69300 |
NIBCO |
ASTM F877 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F-LF 1/2" x 3/4" | NP23F-LF 5/8" x 3/4" | NP23F-LF 1 1/4" x 1 1/4" | |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 3/4" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 5/8" x 3/4" | NP25B-LF 3/4" x 1" | NP25B-LF 1" x 3/4" |
| NP25B-LF 1 1/4" x 1 1/4" | |||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01-LF 5/8" | NP01-LF 1 1/4" | NP01R-LF 1/2" x 3/8" |
| NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | ||
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 3/8" x 1/2" | NP28-LF 1/2" x 1/2" | NP28TB-LT 1/2" x 1/2" | NP28-LF 3/4" |
| NP28-LF 3/4" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F-LF 3/8" x 1/2" | NP22F-LF 1/2" x 1/2" | NP22F-LF 3/4" x 3/4" | NP22F-LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1 1/4" | ||
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29R-LF 1/2" | NP29R-LF 3/4" | NP29R-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 1" x 3/4" | NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 1 1/4" | NP18-LF 1" | |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP27B-LF 1/2" x 1/2" | NP26SE-LF 3/4" x 3/4" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 3/4" x 3/4" x 1" |
| NP11-LF 1" | NP11-LF 1 1/4" | NP11R-LF 1" x 1" x 1/2" | NP11R-LF 1" x 1/2" x 3/4" |
| NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 3/4" | NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 3/4" x 1/2" |
| NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings@ ˘ § ++ [G] |
Brass C69300 |
NIBCO |
CSA B137.5 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F -LF 1/2" x 3/4" | NP23F -LF 5/8" x 3/4" | NP23F -LF 1 1/4" x 1 1/4" | |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1" x 3/4" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 5/8" x 3/4" | NP25B-LF 1" x 3/4" | NP25B-LF 3/4" x 1" |
| NP25B-LF 1 1/4" x 1 1/4" | |||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01-LF 5/8" | NP01R-LF 1/2" x 3/8" | NP01-LF 1 1/4" |
| NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | ||
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 3/8" x 1/2" | NP28-LF 3/4" x 1/2" | NP28-LF 3/4" |
| NP28TB-LT 1/2" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F -LF 3/8" x 1/2" | NP22F -LF 1/2" x 1/2" | NP22F -LF 3/4" x 3/4" | NP22F -LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1 1/4" | ||
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29-LF 1/2'" | NP29-LF 3/4" | NP29-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 1" | NP18-LF 1 1/4" | |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | NP27B-LF 1/2" x 1/2" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 3/4" x 3/4" x 1" |
| NP11-LF 1" | NP11R-LF 1" x 3/4" x 3/4" | NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 1" x 1/2" |
| NP11R-LF 1" x 1/2" x 3/4" | NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 1/2" | NP11-LF 1 1/4" |
| NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Shanghai, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ˘ § [G] |
Brass C69300 |
NIBCO |
ASTM F1807 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F -LF 1/2" x 3/4" | NP23F-LF 1/2" x 1/2" | NP23F -LF 5/8" x 3/4" | NP23F -LF 1 1/4" x 1 1/4" |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 1/2" Bag of 2 | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" |
| NP26B-LF 3/4" x 3/4" Bag of 1 | NP26B-LF 1" x 1" | NP26B-LF 1 1/4" X 1" | NP26B-LF 1 1/4" X 1 1/4" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1" x 3/4" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 1/2" Bag of 2 | NP25B-LF 1/2" x 3/4" | NP25B-LF 1/2" x 3/4" Bag of 1 |
| NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 1/2" Bag of 1 | NP25B-LF 3/4" x 3/4" | NP25B-LF 3/4" x 1" |
| NP25B-LF 1" x 3/4" | NP25B-LF 3/4" x 3/4" Bag of 1 | NP25B-LF 1" x 1" | NP25B-LF 1 1/4" x 1 1/4" |
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 1/2" x 1/2" Bag of 1 | NP25B-LF 5/8" x 3/4" | NP25B-LF 1" x 3/4" |
| NP25B-LF 3/4" x 1" | NP25B-LF 1 1/4" x 1 1/4" | ||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01R-LF 1/2" x 3/8" | NP01-LF 1/2" X 1/2" | NP01-LF 1/2" X 1/2" Bag of 2 |
| NP01-LF 1/2" x 1/2" Bag of 50 | NP01-LF 5/8" | NP01R-LF 3/4" X 1/2" | NP01R-LF 3/4" X 1/2" Bag of 2 |
| NP01-LF 3/4" x 3/4" | NP01-LF 3/4" X 3/4" Bag of 2 | NP01-LF 1" | NP01R-LF 1" X 3/4" |
| NP01-LF 1 1/4" | NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | |
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 1/2" X 1/2" Bag of 1 | NP28-LF 3/4" X 1/2" | NP28-LF 3/4" X 3/4" |
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 3/8" x 1/2" | NP28-LF 3/4" x 1/2" | NP28-LF 3/4" |
| NP28TB-LT 1/2" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F -LF 3/8" x 1/2" | NP22F -LF 1/2" x 1/2" | NP22F -LF 3/4" x 3/4" | NP22F -LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP07-LF 1/2" Bag of 2 | NP25BE-LF 1/2" x 1/2" | NP25BE-LF 1/2" X 1/2" Bag of 1 | NP25BE-LF 1/2" X 3/4" |
| NP07-LF 3/4" Bag of 2 | NP07-LF 3/4" | NP07R-LF 3/4" x 1/2" | NP07R-LF 3/4" x 1/2" Bag of 2 |
| NP25BE-LF 3/4" X 3/4" | NP07-LF 1" | ||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1/2" | NP07-LF 1 1/4" | |
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 1/2" X 1/2" Bag of 2 | NP23F-LF 3/4" x 3/4" | NP23F-LF 3/4" X 3/4" Bag of 2 |
| NP23F-LF 1" x 1" | NP23F-LF 1 1/4" X 1 1/4" | ||
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 1/2" x 1/2" Bag of 2 | NP23-LF 3/4" x 3/4" | NP23-LF 3/4" x 3/4" Bag of 2 |
| NP23-LF 1" X 1" | NP23-LF 1 1/4" X 1 1/4" | ||
|
PB Transition Coupling |
|||
| NP29R-LF 1/2" | NP29R-LF 3/4" | NP29R-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 1/2" Bag of 2 | NP18-LF 3/4" | NP18-LF 3/4" Bag of 2 |
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 3/4" | NP18-LF 1" | NP18-LF 1 1/4" |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x NPSM) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | NP26BS-LF 3/4" | |
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP26PS-LF 1/2" X 1/2" | NP27-LF 1/2" x 1/2" | NP26PS-LF 1/2" x 1/2" Bag of 2 |
|
Swivel Closet Adapter (PEX x Straight) |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x FIP) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | NP27B-LF 1/2" x 1/2" | |
|
Swivel Elbow with Plastic Nut (PEX x FIP) |
|||
| NP27-LF 3/8" x 1/2" | |||
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27P-LF 1/2" X 1/2" | NP27P-LF 1/2" X 1/2" Bag of 2 | NP27SE-LF 3/8" x 1/2" | |
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" | NP11-LF 1/2" Bag of 2 |
| NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 1/2" X 1/2" X 3/4" | NP11R-LF 1/2" X 1/2" X 3/4" Bag of 1 | NP11-LF 3/4" |
| NP11-LF 3/4" Bag of 2 | NP11R-LF 3/4" X 1/2" X 1/2" | NP11R-LF 3/4" X 1/2" X 3/4" | NP11R-LF 3/4" X 3/4" X 1/2" |
| NP11R-LF 3/4" X 3/4" X 1/2" Bag of 1 | NP11R-LF 3/4" x 3/4" x 1" | NP11-LF 1" | NP11R-LF 1" x 3/4" x 3/4" |
| NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 1" x 1/2" | NP11R-LF 1" X 1" X 3/4" | NP11R-LF 1" x 1/2" x 3/4" |
| NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 1/2" | NP11-LF 1 1/4" | NP11R-LF 1 1/4" x 1 1/4" x 1" |
| NP11R-LF 1 1/4" x 1" x 1" | |||
@ These fittings meet all the requirements under F1807 and F877.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings@ ˘ § ++ [G] |
Brass C69300 |
NIBCO |
ASTM F877 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F-LF 1/2" x 3/4" | NP23F-LF 5/8" x 3/4" | NP23F-LF 1 1/4" x 1 1/4" | |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 3/4" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 5/8" x 3/4" | NP25B-LF 3/4" x 1" | NP25B-LF 1" x 3/4" |
| NP25B-LF 1 1/4" x 1 1/4" | |||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01-LF 5/8" | NP01-LF 1 1/4" | NP01R-LF 1/2" x 3/8" |
| NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | ||
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 3/8" x 1/2" | NP28-LF 1/2" x 1/2" | NP28TB-LT 1/2" x 1/2" | NP28-LF 3/4" |
| NP28-LF 3/4" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F-LF 3/8" x 1/2" | NP22F-LF 1/2" x 1/2" | NP22F-LF 3/4" x 3/4" | NP22F-LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1 1/4" | ||
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29R-LF 1/2" | NP29R-LF 3/4" | NP29R-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 1" x 3/4" | NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 1 1/4" | NP18-LF 1" | |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP27B-LF 1/2" x 1/2" | NP26SE-LF 3/4" x 3/4" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 3/4" x 3/4" x 1" |
| NP11-LF 1" | NP11-LF 1 1/4" | NP11R-LF 1" x 1" x 1/2" | NP11R-LF 1" x 1/2" x 3/4" |
| NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 3/4" | NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 3/4" x 1/2" |
| NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings@ ˘ § ++ [G] |
Brass C69300 |
NIBCO |
CSA B137.5 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F -LF 1/2" x 3/4" | NP23F -LF 5/8" x 3/4" | NP23F -LF 1 1/4" x 1 1/4" | |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1" x 3/4" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 5/8" x 3/4" | NP25B-LF 1" x 3/4" | NP25B-LF 3/4" x 1" |
| NP25B-LF 1 1/4" x 1 1/4" | |||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01-LF 5/8" | NP01R-LF 1/2" x 3/8" | NP01-LF 1 1/4" |
| NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | ||
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 3/8" x 1/2" | NP28-LF 3/4" x 1/2" | NP28-LF 3/4" |
| NP28TB-LT 1/2" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F -LF 3/8" x 1/2" | NP22F -LF 1/2" x 1/2" | NP22F -LF 3/4" x 3/4" | NP22F -LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1 1/4" | ||
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29-LF 1/2'" | NP29-LF 3/4" | NP29-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 1" | NP18-LF 1 1/4" | |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | NP27B-LF 1/2" x 1/2" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 3/4" x 3/4" x 1" |
| NP11-LF 1" | NP11R-LF 1" x 3/4" x 3/4" | NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 1" x 1/2" |
| NP11R-LF 1" x 1/2" x 3/4" | NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 1/2" | NP11-LF 1 1/4" |
| NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
# Products meeting the Uniform Plumbing Code in accordance with the Section 301.2. * Accepted by NSF for use in residential and commercial construction, including manufactured housing.
Facility : Lodz, Poland
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+++ [G] |
CPVC 41 |
NIBCO |
ASTM D2846 |
| 1/2" - 2" | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Taichung, Taiwan
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Valves+ @ [G] |
PVC I-G1 |
NIBCO |
ASTM F1970 |
|
4660-S (Socket End) Compact Ball Valves |
|||
| 1/2" thru 4" | |||
|
4660-T (Threaded End) Comapct Ball Valves |
|||
| 1/2" thru 4" | |||
|
S45CE-E (Solvent Weld) |
|||
| 1/2" thru 2" | |||
|
S45CE-V (Solvent Weld) |
|||
| 1/2" thru 2" | |||
|
T45CE-E (Threaded End) |
|||
| 1/2" thru 2" | |||
|
T45CE-V (Threaded End) |
|||
| 1/2" thru 2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated at 150psi at 73°F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 1358
Processing time was 2 seconds