These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=33450&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Nibco Inc. | ![]() |
| World Headquarters | |
| 1516 Middlebury Street | |
| Elkhart, IN 46516-4740 | |
| United States | |
| 574-295-3000 | |
| Visit this company's website |
Facility : # 1 China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Valves (PW)+ @ [G] |
PVC I-G1 |
NIBCO |
ASTM F1970 |
|
Compact Ball Valves - Solvent Weld |
|||
| 4660-S 1/2" thru 2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. @ PVC Valves rated as 150 psi at 73°F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves (PW)+ @ [G] |
PVC I-G1 |
NIBCO |
ASTM F1970 |
|
Compact Ball Valves - Threaded |
|||
| 4660-T 1/2" thru 2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. @ PVC Valves rated as 150 psi at 73°F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Greensboro, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
NIBCO |
ASTM D2466 |
|
45° Ells Sch 40 |
|||
| 4606 (417) | |||
|
90° Ells Sch 40 |
|||
| 4607 (406) | 4607-2 (409) | 4607-2-3 (411) | 4607-3 (407) |
| 4607-3-3 (408) | 4607-3-4 (412) | 4607-4 (410) | |
|
Adapters Sch 40 |
|||
| 4603 (435) | 4603-2 (478) | 4604 (436) | |
|
Bushings Sch 40 |
|||
| 4618 (437) | 4618-3 (438) | ||
|
Caps Sch 40 |
|||
| 4617 (447) | 4617-3 (448) | ||
|
Couplings Sch 40 |
|||
| 4601 (429) | 4601-3-3 (430) | ||
|
Plugs Sch 40 |
|||
| 4616 (449) | 4616-4 (450) | ||
|
Tees Sch 40 |
|||
| 4611 (401) | 4612 (402) | 4612-3-3 (405) | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Jerome, ID
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
Nibco |
ASTM D2466 |
|
Tees |
|||
| 401-100 10" | 401-120 12" | ||
|
90° Ells |
|||
| 406-100 10" | 406-120 12" | ||
|
45° Ells |
|||
| 417-100 10" | 417-120 12" | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Charlestown, IN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ ### |
CPVC |
NIBCO |
ASTM F1970 |
|
5033-E Union, Socket[G] |
|||
| 3/4" | 1" | ||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
### Product tested for use in hot water (150°F) applications with a rated pressure of 175
psi.
|
|||
Fittings+ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM D2464 |
|
45° Ell Sch 80 |
|||
| 4506-3-3 | |||
|
90° Ell Sch 80 |
|||
| 4507-3-3 | |||
|
Adapters Sch 80 |
|||
| 4503 | 4504 | ||
|
Bushings Sch 80 |
|||
| 4518-3 | 4518-3-4 | ||
|
Cap Sch 80 |
|||
| 4517-3 | |||
|
Coupling Sch 80 |
|||
| 4501-3-3 | |||
|
Plug Sch 80 |
|||
| 4516-4 | |||
|
Tee Sch 80 |
|||
| 4512-3-3 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM D2466 |
|
45° Ell Sch 40 |
|||
| 4606 (417) | |||
|
90° Ells Sch 40 |
|||
| 4607 (406) | 4607-2 (409) | 4607-3 (407) | 4607-3-3 (408) |
| 4607-3-4 (412) | 4607-4 (410) | ||
|
Adapters Sch 40 |
|||
| 4603 (435) | 4603-2 (478) | 4604 (436) | |
|
Bushings Sch 40 |
|||
| 4618 (437) | 4618-3 (438) | ||
|
Caps Sch 40 |
|||
| 4617 (447) | 4617-3 (448) | ||
|
Couplings Sch 40 |
|||
| 4601 (429) | 4601-3-3 (430) | ||
|
Plugs Sch 40 |
|||
| 4616 (449) | 4616-4 (450) | ||
|
Tees Sch 40 |
|||
| 4611 (401) | 4612 (402) | 4612-3-3 (405) | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM D2467 |
|
45° Ell Sch 80 |
|||
| 4506 | |||
|
90° Ell Sch 80 |
|||
| 4507 | |||
|
Adapter Sch 80 |
|||
| 4504 | 4503 | ||
|
Bushings Sch 80 |
|||
| 4518 | 4518-3 | ||
|
Cap Sch 80 |
|||
| 4517 | |||
|
Coupling Sch 80 |
|||
| 4501 | |||
|
Tee Sch 80 |
|||
| 4511 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings* +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F439 |
|
45° Ell Sch 80 |
|||
| 5106 | 5106-3-3 | ||
|
90° Ell Sch 80 |
|||
| 5107 | 5107-3 | 5107-3-3 | |
|
Adapters Sch 80 |
|||
| 5103 | 5104 | ||
|
Bushing Sch 80 |
|||
| 5118 | 5118-3 | 5118-3-4 | |
|
Cap Sch 80 |
|||
| 5117 | 5117-3 | ||
|
Coupling Sch 80 |
|||
| 5101 | 5101-3-3 | ||
|
Plug Sch 80 |
|||
| 5116-4 | |||
|
Tee Sch 80 |
|||
| 5111 | 5112 | 5112-3-3 | |
* Except 4" Sch 80 socket end caps
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves# +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F1970 |
|
Butterfly Valves |
|||
| Model B-EPDM W51BF-E-NO 3" | Model B-EPDM W51BF-E-LH 3" | ||
|
Single-Union Ball Valve - FPM |
|||
| S51SU-V 1/2" - 2" | T51SU-V 1/2" - 2" | F51SU-V 1/2" - 2" | |
|
Single-Union Ball Valves - EPDM |
|||
| S51SU-E 1/2" - 2" | T51SU-E 1/2" - 2" | F51SU-E 1/2" - 2" | |
|
True Union Ball Valves - FPM |
|||
| U51TB-V 1/2" - 2" | S51TB-V 3" - 6" | T51TB-V 3" - 4" | F51TB-V 1/2" - 6" |
|
True-Union Ball Check, Foot, and Vent Valves - FPM |
|||
| U51BC-V 1/2" - 2" | S51BC-V 3" - 4" | T51BC-V 3" - 4" | F51BC-V 1/2" - 4" |
|
True-Union Ball Check, Foot, and Vent Valves- EPDM |
|||
| U51BC-E 1/2" - 2" | S51BC-E 3" - 4" | T51BC-E 3" - 4" | F51BC-E 1/2" - 4" |
|
True-Union Ball Valves - EPDM |
|||
| U51TB-E 1/2" - 2" | S51TB-E 3" - 6" | T51TB-E 3" - 4" | F51TB-E 1/2" - 6" |
|
True-Union Diverter Ball Valves-EPDM@@@ |
|||
| S51D2-E 1/2" - 2" | T51D2-E 1/2" - 2" | F51D2-E 1/2" - 2" | |
|
True-Union Diverter Ball Valves-FPM@@@ |
|||
| S51D2-V 1/2" - 2" | T51D2-V 1/2" - 2" | F51D2-V 1/2" - 2" | |
|
True-Union Multiport Ball Valves-EPDM@@ |
|||
| S51M3-E 1/2" - 2" | T51M3-E 1/2" - 2" | F51M3-E 1/2" - 2" | |
|
True-Union Multiport Ball Valves-FPM@@ |
|||
| S51M3-V 1/2" - 2" | T51M3-V 1/2" - 2" | F51M3-V 1/2" - 2" | |
@@@ 3-Way/2-Position @@ 3-Way/3-Position # Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings (PW)# +++ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM F1970 |
|
45° Ell, Flanged |
|||
| 4506-12 | |||
|
90° Ell, Flanged |
|||
| 4507-12 | |||
|
Blind Flange |
|||
| 4519 | |||
|
Socket Flange |
|||
| 4551 | |||
|
Tee, Flanged |
|||
| 4511-12 | |||
|
Threaded Flange |
|||
| 4551-3 | |||
|
Union, Socket |
|||
| 4533 | |||
|
Union, Socket and Threaded |
|||
| 4533-3 | |||
|
Union, Threaded |
|||
| 4533-3-3 | |||
# Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves## +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F1970 |
|
True-Union Ball Valves - EPDM |
|||
| U51TB-E 1/2" - 2" | |||
|
True-Union Ball Valves - FPM |
|||
| U51TB-V 1/2" - 2" | |||
## Product tested for use in cold water (73°F) applications with a rated pressure of 250
PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves (PW)# +++ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM F1970 |
|
Angle Valves-FPM |
|||
| T45AC-V 1/4" - 1" | |||
|
Butterfly Valves |
|||
| Model B-EPDM W45BF-E-NO 4" - 6" | Model B-EPDM W45BF-E-LH 4" - 6" | Model B-EPDM W45BF-E-GO 4" - 6" | Model C-EPDM W45BG-E-3 2" - 8" |
| Model C-EPDM W45BG-E-5 2" - 10" | |||
|
Calibrated Needle Valves-FPM |
|||
| T45CN-V 1/4" | |||
|
Chemcock Valves-FPM |
|||
| A45CC-V 1/4" | M45CC-V 1/4" | ||
|
Single-Union Ball Valves-EPDM |
|||
| S45SU-V 1/2" - 2" | T45SU-V 1/2" - 2" | F45SU-V 1/2" - 2" | |
|
Single-Union Ball Valves-FPM |
|||
| S45SU-V 1/2" - 2" | T45SU-V 1/2" - 2" | F45SU-V 1/2" - 2" | |
|
True-Union Ball Check, Foot, and Vent Valve-FPM |
|||
| U45BC-V 1/2" - 2" | S45BC-V 3" - 4" | T45BC-V 3" - 4" | F45BC-V 1/2" - 4" |
|
True-Union Ball Check, Foot, and Vent Valves-EPDM |
|||
| U45BC-E 1/2" - 2" | S45BC-E 3" - 4" | T45BC-E 3" - 4" | F45BC-E 1/2" - 4" |
|
True-Union Ball Valves-EPDM |
|||
| U45TB-E 1/2" - 2" | S45TB-E 3" - 6" | T45TB-E 3" - 4" | F45TB-E 1/2" - 6" |
|
True-Union Ball Valves-FPM |
|||
| U45TB-V 1/2" - 2" | S45TB-V 3" - 6" | T45TB-V 3" - 4" | F45TB-V 1/2" - 6" |
|
True-Union Diverter Ball Valves-EPDM@@@ |
|||
| S45D2-E 1/2" - 2" | T45D2-E 1/2" - 2" | F45D2-E 1/2" - 2" | |
|
True-Union Diverter Ball Valves-FPM@@@ |
|||
| S45D2-V 1/2" - 2" | T45D2-V 1/2" - 2" | F45D2-V 1/2" - 2" | |
|
True-Union Multiport Ball Valves-EPDM |
|||
| S45M3-E 1/2" - 2" | T45M3-E 1/2" - 2" | F45M3-E 1/2" - 2" | |
|
True-Union Multiport Ball Valves-FPM@@ |
|||
| S45M3-V 1/2" - 2" | T45M3-V 1/2" - 2" | F45M3-V 1/2" - 2" | |
|
Y-Pattern Valves-FPM |
|||
| T45YP-V 1/4" - 1" | |||
@@@ 3-Way/2-Position @@ 3-Way/3-Position # Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves (PW)## +++ [G] |
PVC I-G1 |
NIBCO/Chemtrol |
ASTM F1970 |
|
True-Union BAll Valves - EPDM |
|||
| U45TB-V 1/2" - 2" | |||
|
True-Union BAll Valves - FPM |
|||
| U45TB-E 1/2" - 2" | |||
## Product tested for use in cold water (73°F) applications with a rated pressure of 250
PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings (PW)# +++ [G] |
CPVC 41 |
NIBCO/Chemtrol |
ASTM F1970 |
|
45° Ell, Flanged |
|||
| 5106-12 | |||
|
90° Ell, Flanged |
|||
| 5107-12 | |||
|
Blind Flange |
|||
| 5119-S | 5119-W | ||
|
Socket Flange |
|||
| 5151-S | 5151-W | ||
|
Tee, Flanged |
|||
| 5111-112 | |||
|
Thread Flange |
|||
| 5151-3-S | 5151-3-W | ||
|
Union, Threaded |
|||
| 5133-3-3 | |||
|
Union, socket |
|||
| 5133 | |||
|
Union, socket and Threaded |
|||
| 5133-3 | |||
# Product tested for use in cold water (73°F) applications with a rated
pressure of 150 PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F438 |
|
5001 Coupling |
|||
| 3/4" | 1" | 1 1/4" | |
|
5001-G Grooved Adapter |
|||
| 1 1/4" | |||
|
5001R Coupling |
|||
| 1 1/2" x 3/4' | 1 1/2" x 1 1/4" | 2" x 1" | |
|
5001R Reducer Coupling |
|||
| 1" x 3/4" | 1 1/4" x 1" | ||
|
5006 45° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007 90° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007R 90° Reducing Elbow |
|||
| 1" x 3/4" | |||
|
5011 Tee |
|||
| 3/4" | 1" | 1 1/4" | |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1" x 3/4" | 1 1/4" x 1" x 1" | 1 1/4" x 1" x 1 1/4" | 1 1/4" x 1 1/4" x 3/4" |
| 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1 1/4" | 2" x 2" x 1" | ||
|
5011R Tee |
|||
| 3/4" x 3/4" x 1" | 1" x 3/4" x 3/4" | 1" x 3/4" x 1" | 1" x 1" x 3/4" |
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1 1/4" | ||
|
5017 Cap |
|||
| 3/4" | 1" | 1 1/4" | |
|
5018 Bushing |
|||
| 1 1/4" x 3/4" | 1 1/4" x 1" | ||
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | |||
|
5018 Reducer Bushing |
|||
| 1" x 3/4" | |||
|
5019-H Blind Flange |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035 Cross |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035R Reducing Cross |
|||
| 1" X 3/4" | |||
|
5051-H Flange |
|||
| 3/4" | 1" | 1 1/4" | |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+ [1] |
MLTPL |
NIBCO |
ASTM F438 |
|
5003-S-BT Brastic Sprinkler Head Adapter SocxFIPT[G] |
|||
| 3/4" x 1/2" | |||
|
5003-S-BT Brastic Sprinkler Head Adapter SocxFIPT[G] |
|||
| 1" x 1/2" | |||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [1] Certified for a maximum use of one sprinkler head per eight feet of piping. |
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F439 |
|
5001 Coupling |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001-G Grooved Adapter |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001R Coupling |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1" |
| 2" x 1 1/2" | |||
|
5006 45° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5007 90° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011 Tee |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 3/4" |
| 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1" | 2" x 2" x 1 1/4" | 2" x 2" x 1 1/2" | |
|
5011R Tee |
|||
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 2" | 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 1 1/2" |
| 3" x 3" x 1 1/2" | 3" x 3" x 2" | 3" x 3" x 2 1/2" | |
|
5017 Cap |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5018 Bushing |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 3/4" |
| 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1 1/2" | 2 1/2" x 2" | 3" x 2" | 3" x 2 1/2" |
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | 3" x 1 1/2" | ||
|
5019-H Blind Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5035 Cross |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5051-2-A Flange - Van Stone |
|||
| 3" | |||
|
5051-A Flange - Van Stone |
|||
| 3" | |||
|
5051-H Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings[G] |
CPVC |
NIBCO |
SE 8817 |
|
5001-G-M Grooved Adapter |
|||
| 65mm x 2 1/2" | |||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings[G] |
CPVC |
Nibco |
SE 8459 |
|
45° Ell Sch 80 |
|||
| 5106 | |||
|
90° Ell Sch 80 |
|||
| 5107 | |||
|
Adapter Sch 80 |
|||
| 5103 | 5104 | ||
|
Bushing Sch 80 |
|||
| 5118 | |||
|
Cap Sch 80 |
|||
| 5117 | |||
|
Coupling Sch 80 |
|||
| 5101 | |||
|
Tee Sch 80 |
|||
| 5111 | |||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Goshen, IN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ [G] |
PVC I-G1 |
NIBCO |
ASTM D2466 |
|
45° Ell Sch 40 |
|||
| 4606 (417) | |||
|
90° Ell Sch 40 |
|||
| 4607 (406) | 4607-2 (409) | 4607-2-3 (411) | 4607-3 (407) |
| 4607-3-3 (408) | 4607-3-4 (412) | 4607-4 (410) | |
|
Adapters Sch 40 |
|||
| 4603 (435) | 4603-2 (478) | 4604 (436) | |
|
Bushings Sch 40 |
|||
| 4618 (437) | 4618-3 (438) | ||
|
Caps Sch 40 |
|||
| 4617 (447) | 4617-3 (448) | ||
|
Couplings Sch 40 |
|||
| 4601 (429) | 4601-3-3 (430) | ||
|
Plugs Sch 40 |
|||
| 4616 (449) | 4616-4 (450) | ||
|
Tees Sch 40 |
|||
| 4611 (401) | 4612 (402) | 4612-3-3 (405) | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ ### |
CPVC |
NIBCO |
ASTM F1970 |
|
5033-E Union, Socket[G] |
|||
| 3/4" | 1" | ||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
### Product tested for use in hot water (150°F) applications with a rated pressure of 175
psi.
|
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F438 |
|
5001 Coupling |
|||
| 3/4" | 1" | 1 1/4" | |
|
5001-G Grooved Adapter |
|||
| 1 1/4" | |||
|
5001R Coupling |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1 1/4" | 2" x 1" | |
|
5001R Reducer Coupling |
|||
| 1" x 3/4" | 1 1/4" x 1" | ||
|
5006 45° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007 90° Elbow |
|||
| 3/4" | 1" | 1 1/4" | |
|
5007R 90° Reducing Elbow |
|||
| 1" x 3/4" | |||
|
5011 Tee |
|||
| 3/4" | 1" | 1 1/4" | |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1" x 3/4" | 1 1/4" x 1" x 1" | 1 1/4" x 1" x 1 1/4" | 1 1/4" x 1 1/4" x 3/4" |
| 1 1/4" x 1 1/4" x 1" | 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" |
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1 1/4" | 2" x 2" x 1" | ||
|
5011R Tee |
|||
| 3/4" x 3/4" x 1" | 1" x 3/4" x 3/4" | 1" x 3/4" x 1" | 1" x 1" x 3/4" |
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 1 1/4" | ||
|
5017 Cap |
|||
| 3/4" | 1" | 1 1/4" | |
|
5018 Bushing |
|||
| 1 1/4" x 3/4" | 1 1/4" x 1" | ||
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | |||
|
5018 Reducer Bushing |
|||
| 1" x 3/4" | |||
|
5019-H Blind Flange |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035 Cross |
|||
| 3/4" | 1" | 1 1/4" | |
|
5035R Reducing Cross |
|||
| 1" X 3/4" | |||
|
5051-H Flange |
|||
| 3/4" | 1" | 1 1/4" | |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+++ [G] |
CPVC |
NIBCO |
ASTM F439 |
|
5001 Coupling |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001-G Grooved Adapter |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5001R Coupling |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1" |
| 2" x 1 1/2" | |||
|
5006 45° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5007 90° Elbow |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011 Tee |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5011R Reducer Tee |
|||
| 1 1/4" x 1 1/4" x 1 1/2" | 1 1/2" x 1 1/4" x 3/4" | 1 1/2" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 3/4" |
| 1 1/2" x 1 1/2" x 1" | 1 1/2" x 1 1/2" x 2" | 1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 3/4" |
| 2" x 2" x 1" | 2" x 2" x 1 1/4" | 2" x 2" x 1 1/2" | |
|
5011R Tee |
|||
| 2 1/2" x 2 1/2" x 1" | 2 1/2" x 2 1/2" x 2" | 2 1/2" x 2 1/2" x 1 1/4" | 2 1/2" x 2 1/2" x 1 1/2" |
| 3" x 3" x 1 1/2" | 3" x 3" x 2" | 3" x 3" x 2 1/2" | |
|
5017 Cap |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5018 Bushing |
|||
| 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 3/4" |
| 2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" | 2 1/2" x 1 1/4" |
| 2 1/2" x 1 1/2" | 2 1/2" x 2" | 3" x 2" | 3" x 2 1/2" |
|
5018 Flush Bushing |
|||
| 2 1/2" x 1" | 3" x 1 1/2" | ||
|
5019-H Blind Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5035 Cross |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
|
5051-2-A Flange - Van Stone |
|||
| 3" | |||
|
5051-A Flange - Van Stone |
|||
| 3" | |||
|
5051-H Flange |
|||
| 1 1/2" | 2" | 2 1/2" | 3" |
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings (PW)§ ** +++ [G] |
CPVC 41* |
NIBCO |
ASTM F1970 |
|
4703 CT |
|||
| 1/2" and 3/4" | |||
|
4704 CT |
|||
| 1/2" and 3/4" | |||
* Copper C12200
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Product tested for use in hot water (180°F) applications with a rated pressure of 100
PSI.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings¢ § +++ [G] |
CPVC 41 |
NIBCO |
ASTM D2846 |
|
45° Ell |
|||
| 4706 | |||
|
45° Street Elbow |
|||
| 4706-2 | |||
|
90° Drop Ear Ell, Slip x Slip |
|||
| 1/2" 4707-5 | |||
|
90° Ell |
|||
| 4707 | |||
|
90° Street Elbow |
|||
| 4707-2 | |||
|
Bushing |
|||
| 4718 | |||
|
Cap |
|||
| 4717 | |||
|
Coupling |
|||
| 4701 | |||
|
Male Adapter |
|||
| 4704 | |||
|
Tee |
|||
| 4711 | |||
|
Transition Bushing |
|||
| 4718-T | |||
|
Transition Coupling |
|||
| 4701-T | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings% ¢ § +++ [G] |
CPVC 41 |
NIBCO |
ASTM D2846 |
|
90° Drop Ear Ell, Slip x FIPT |
|||
| 1/2" 4707-3-5 | |||
|
Adapter |
|||
| 4703 | |||
% Product is Certified for use as a non-repeating fitting, not Certified when installed
within 30-feet of any other transition fitting.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings¢ +++ [G] |
CPVC 41 |
NIBCO |
CSA B137.6 |
|
45° Ell |
|||
| 4706 | |||
|
45° Street Elbow |
|||
| 4706-2 | |||
|
90° Drop Ear Ell, Slip x Slip |
|||
| 1/2" 4707-5 | |||
|
90° Ell |
|||
| 4707 | |||
|
90° Street Elbow |
|||
| 4707-2 | |||
|
Bushing |
|||
| 4718 | |||
|
Cap |
|||
| 4717 | |||
|
Coupling |
|||
| 4701 | |||
|
Male Adapter |
|||
| 4704 | |||
|
Tee |
|||
| 4711 | |||
|
Transition Bushing |
|||
| 4718-T | |||
|
Transition Coupling |
|||
| 4701-T | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings% ¢ +++ [G] |
CPVC 41 |
NIBCO |
CSA B137.6 |
|
90° Drop Ear Ell, Slip x FIPT |
|||
| 1/2" 4707-3-5 | |||
|
Adapter |
|||
| 4703 | |||
% Product is Certified for use as a non-repeating fitting, not Certified when installed
within 30-feet of any other transition fitting.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings[G] |
CPVC |
NIBCO |
SE 8817 |
|
5001-G-M Grooved Adapter |
|||
| 65 mm x 2 1/2" | |||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Lebanon, OH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe# % ^ § ++ [G] |
PEX 1006 |
NIBCO® PEX |
ASTM F876/F877 |
| 1/4" - 1 1/4" SDR 9 | |||
# Product is authorized for white, blue, red, and terra-cotta colors. % Product tested and Certified for Cold 23 (73°F) and Domestic Hot (140°F) applications only. ^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe# % ^ ¢ § ++ [G] |
PEX 1006 |
NIBCO® PEX |
CSA B137.5 |
| 1/4" - 1 1/4" SDR 9 | |||
# Product is authorized for white, blue, red, and terra-cotta colors. % Product tested and Certified for Cold 23 (73°F) and Domestic Hot (140°F) applications only. ^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Manifold@ ^ § ++ [G] |
MLTPL |
NIBCO PEX Home Run Manifold |
ASTM F877 |
|
PM6-P-LF |
|||
| 1" | |||
|
PM12-P-LF |
|||
| 1" | |||
|
PH16-LF |
|||
| 3/4" | |||
|
PH8-LF |
|||
| 3/4" | |||
|
PM12-LF |
|||
| 3/4" | |||
|
PM6-LF |
|||
| 3/4" | |||
|
PH24D-LF |
|||
| 3/4" | |||
|
PH40D-LF |
|||
| 3/4" | |||
|
PH32D-LF |
|||
| 3/4" | |||
|
PH16D-LF |
|||
| 3/4" | |||
|
PM12-LF |
|||
| 1" | |||
|
PH16-LF |
|||
| 1" | |||
|
PH24D-LF |
|||
| 1" | |||
|
PH32D-LF |
|||
| 1" | |||
|
PM6-LF |
|||
| 1" | |||
|
PH8-LF |
|||
| 1" | |||
|
PH16D-LF |
|||
| 1" | |||
|
PH40D-LF |
|||
| 1" | |||
|
PH16D-LF |
|||
| 1 1/4" | |||
|
PH8-LF |
|||
| 1 1/4" | |||
|
PH40D-LF |
|||
| 1 1/4" | |||
|
PH32D-LF |
|||
| 1 1/4" | |||
|
PH24D-LF |
|||
| 1 1/4" | |||
|
PH16-LF |
|||
| 1 1/4" | |||
@ Certified for manifolds without ball valves. ^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Stuarts Draft, VA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings! § ¿ +++ [G] |
MLTPL |
NIBCO |
ASTM F1807 |
|
PC604P Pex x Press Adapter |
|||
| 1" x 1" | 1/2" x 1/2" | 1/2" x 3/4" | 3/4" x 1/2" |
| 3/4" x 3/4" | |||
! Product is exempt from bearing the PS 117 and/or CSA MSE 13 performance standard(s).
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
¿ All Listed Products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings! § ¿ +++ [G] |
MLTPL |
NIBCO |
ASTM F877 |
|
PC604P Pex x Press Adapter |
|||
| 1" x 1" | 1/2" x 1/2" | 1/2" x 3/4" | 3/4" x 1/2" |
| 3/4" x 3/4" | |||
! Product is exempt from bearing the PS 117 and/or CSA MSE 13 performance standard(s).
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
¿ All Listed Products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings! § ¿ +++ [G] |
MLTPL |
NIBCO |
CSA B137.5 |
|
PC604P Pex x Press Adapter |
|||
| 1" x 1" | 1/2" x 1/2" | 1/2" x 3/4" | 3/4" x 1/2" |
| 3/4" x 3/4" | |||
! Product is exempt from bearing the PS 117 and/or CSA MSE 13 performance standard(s).
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
¿ All Listed Products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : B China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ¢ § [G] |
Brass C69300 |
NIBCO |
ASTM F1807 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F -LF 1/2" x 3/4" | NP23F-LF 1/2" x 1/2" | NP23F -LF 5/8" x 3/4" | NP23F -LF 1 1/4" x 1 1/4" |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1" x 3/4" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 1/2" x 1/2" Bag of 1 | NP25B-LF 5/8" x 3/4" | NP25B-LF 1" x 3/4" |
| NP25B-LF 3/4" x 1" | NP25B-LF 1 1/4" x 1 1/4" | ||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01R-LF 1/2" x 3/8" | NP01-LF 1/2" x 1/2" Bag of 50 | NP01-LF 5/8" |
| NP01-LF 3/4" x 3/4" | NP01-LF 1 1/4" | NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" |
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 3/8" x 1/2" | NP28-LF 3/4" x 1/2" | NP28-LF 3/4" |
| NP28TB-LT 1/2" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F -LF 3/8" x 1/2" | NP22F -LF 1/2" x 1/2" | NP22F -LF 3/4" x 3/4" | NP22F -LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1/2" | NP07-LF 1 1/4" | |
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29R-LF 1/2" | NP29R-LF 3/4" | NP29R-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 3/4" | NP18-LF 1" | NP18-LF 1 1/4" |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | NP27B-LF 1/2" x 1/2" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" | NP11-LF 1/2" x 1/2" x 3/8" |
| NP11-LF 3/4" | NP11R-LF 3/4" x 3/4" x 1" | NP11-LF 1" | NP11R-LF 1" x 3/4" x 3/4" |
| NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 1" x 1/2" | NP11R-LF 1" x 1/2" x 3/4" | NP11R-LF 1" x 1/2" x 1" |
| NP11R-LF 1" x 3/4" x 1/2" | NP11-LF 1 1/4" | NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" |
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ¢ § ++ [G] |
Brass C69300 |
NIBCO |
ASTM F877 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F-LF 1/2" x 3/4" | NP23F-LF 5/8" x 3/4" | NP23F-LF 1 1/4" x 1 1/4" | |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 3/4" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 5/8" x 3/4" | NP25B-LF 3/4" x 1" | NP25B-LF 1" x 3/4" |
| NP25B-LF 1 1/4" x 1 1/4" | |||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01-LF 5/8" | NP01-LF 1 1/4" | NP01R-LF 1/2" x 3/8" |
| NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | ||
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 3/8" x 1/2" | NP28-LF 1/2" x 1/2" | NP28TB-LT 1/2" x 1/2" | NP28-LF 3/4" |
| NP28-LF 3/4" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F-LF 3/8" x 1/2" | NP22F-LF 1/2" x 1/2" | NP22F-LF 3/4" x 3/4" | NP22F-LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1 1/4" | ||
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29R-LF 1/2" | NP29R-LF 3/4" | NP29R-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 1" x 3/4" | NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 1 1/4" | NP18-LF 1" | |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP27B-LF 1/2" x 1/2" | NP26SE-LF 3/4" x 3/4" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 3/4" x 3/4" x 1" |
| NP11-LF 1" | NP11-LF 1 1/4" | NP11R-LF 1" x 1" x 1/2" | NP11R-LF 1" x 1/2" x 3/4" |
| NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 3/4" | NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 3/4" x 1/2" |
| NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ¢ § ++ [G] |
Brass C69300 |
NIBCO |
CSA B137.5 |
|
Adapter (PEX x F Sweat) |
|||
| NP23F -LF 1/2" x 3/4" | NP23F -LF 5/8" x 3/4" | NP23F -LF 1 1/4" x 1 1/4" | |
|
Adapter (PEX x FIP) |
|||
| NP26B-LF 1/2" x 1/2" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 3/4" | NP26B-LF 1" x 1" |
|
Adapter (PEX x FPT) |
|||
| NP26B-LF 1" x 3/4" | NP26B-LF 1/2" x 3/4" | NP26B-LF 3/4" x 1" | NP26B-LF 1" x 1" |
| NP26B-LF 1 1/4" x 1" | NP26B-LF 1 1/4" x 1 1/4" | ||
|
Adapter (PEX x M Sweat) |
|||
| NP23-LF 3/8" x 3/8" | NP23-LF 1/2" x 3/4" | NP23-LF 3/4" x 1/2" | NP23-LF 1" x 1" |
| NP23-LF 1 1/4" | |||
|
Adapter (PEX x MIP) |
|||
| NP25B-LF 1/2" x 1/2" | NP25B-LF 1/2" x 3/4" | NP25B-LF 3/4" x 1/2" | NP25B-LF 3/4" x 3/4" |
| NP25B-LF 1" x 1" | |||
|
Adapter (PEX x MPT) |
|||
| NP25B-LF 3/8" x 1/2" | NP25B-LF 5/8" x 3/4" | NP25B-LF 1" x 3/4" | NP25B-LF 3/4" x 1" |
| NP25B-LF 1 1/4" x 1 1/4" | |||
|
Coupling (PEX x PEX) |
|||
| NP01-LF 3/8" | NP01-LF 5/8" | NP01R-LF 1/2" x 3/8" | NP01-LF 1 1/4" |
| NP01R-LF 1 1/4" x 3/4" | NP01R-LF 1 1/4" x 1" | ||
|
Coupling with Stop (PEX x PEX) |
|||
| NP01S-LF 1" | NP01S-LF 1 1/4" | ||
|
Drop Ear Elbow (PEX x FIP) |
|||
| NP28-LF 1/2" x 1/2" | |||
|
Elbow (PEX x Drop Ear) |
|||
| NP28-LF 1/2" x 1/2" | NP28-LF 3/8" x 1/2" | NP28-LF 3/4" x 1/2" | NP28-LF 3/4" |
| NP28TB-LT 1/2" x 1/2" | |||
|
Elbow (PEX x F Sweat) |
|||
| NP22F -LF 3/8" x 1/2" | NP22F -LF 1/2" x 1/2" | NP22F -LF 3/4" x 3/4" | NP22F -LF 5/8" x 3/4" |
|
Elbow (PEX x M Sweat) |
|||
| NP22-LF 5/8" x 3/4" | |||
|
Elbow (PEX x MIP) |
|||
| NP25BE-LF 1/2" x 1/2" | |||
|
Elbow (PEX x MPT) |
|||
| NP25BE-LF 1/2" x 3/8" | NP25BE-LF 1/2" x 3/4" | NP25BE-LF 3/4" x 1/2" | NP25BE-LF 3/4" x 3/4" |
| NP25BE-LF 3/4" x 1" | |||
|
Elbow (PEX x PEX) |
|||
| NP07-LF 3/8" | NP07-LF 1 1/4" | ||
|
Female Sweat Adapter |
|||
| NP23F-LF 1/2" x 1/2" | NP23F-LF 3/4" x 3/4" | NP23F-LF 1" x 1" | |
|
Insert Coupling (PEX x PEX) |
|||
| NP01-LF 1/2" | NP01R-LF 3/4" x 1/2" | NP01-LF 3/4" | NP01R-LF 1" x 3/4" |
| NP01-LF 1" | |||
|
Insert Elbow |
|||
| NP07-LF 1/2" | NP07R-LF 3/4" x 1/2" | NP07-LF 3/4" | NP07-LF 1" |
|
Insert Tee |
|||
| NP11-LF 1/2" | NP11R-LF 1/2" x 1/2" x 3/4" | NP11R-LF 3/4" x 1/2" x 1/2" | NP11R-LF 3/4" x 1/2" x 3/4" |
| NP11R-LF 3/4" x 3/4" x 1/2" | NP11-LF 3/4" | NP11R-LF 1" x 1" x 3/4" | |
|
Male Sweat Adapter |
|||
| NP23-LF 1/2" x 1/2" | NP23-LF 3/4" x 3/4" | ||
|
PB Transition Coupling |
|||
| NP29-LF 1/2'" | NP29-LF 3/4" | NP29-LF 1" | |
|
PE Transition Coupling |
|||
| NP29PE-LF 3/4" x 3/4" | NP29PE-LF 1" x 3/4" | NP29PE-LF 1" x 1" | |
|
Plug |
|||
| NP18-LF 1/2" | NP18-LF 3/4" | ||
|
Plug (PEX) |
|||
| NP18-LF 3/8" | NP18-LF 1" | NP18-LF 1 1/4" | |
|
Straight Swivel Closet Adapter |
|||
| NP44-LF 3/8" | NP44-LF 1/2" | ||
|
Swivel Adapter (PEX x FIP) |
|||
| NP26BS-LF 3/4" x 3/4" | |||
|
Swivel Adapter (PEX x FPT) |
|||
| NP26BS-LF 1/2" x 1/2" | |||
|
Swivel Adapter with Brass Nut (PEX x FPT) |
|||
| NP26BS-LF 1/2" | NP26BS-LF 1/2" x 3/4" | ||
|
Swivel Adapter with Plastic Nut (PEX x NPSM) |
|||
| NP27-LF 3/8" x 1/2" | NP27-LF 1/2" x 1/2" | ||
|
Swivel Elbow with Brass Nut (PEX x NPSM) |
|||
| NP26SE-LF 1/2" x 3/4" | NP26SE-LF 3/4" x 3/4" | NP27B-LF 1/2" x 1/2" | |
|
Swivel Elbow with Plastic Nut (PEX x NPSM) |
|||
| NP27SE-LF 3/8" x 1/2" | |||
|
Tee (PEX) |
|||
| NP11-LF 3/8" | NP11-LF 3/8" x 3/8" x 1/2" | NP11-LF 1/2" x 1/2" x 3/8" | NP11R-LF 3/4" x 3/4" x 1" |
| NP11-LF 1" | NP11R-LF 1" x 3/4" x 3/4" | NP11R-LF 1" x 3/4" 1" | NP11R-LF 1" x 1" x 1/2" |
| NP11R-LF 1" x 1/2" x 3/4" | NP11R-LF 1" x 1/2" x 1" | NP11R-LF 1" x 3/4" x 1/2" | NP11-LF 1 1/4" |
| NP11R-LF 1 1/4" x 1 1/4" x 1" | NP11R-LF 1 1/4" x 1" x 1" | ||
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Lodz, Poland
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+++ [G] |
CPVC 41 |
NIBCO |
ASTM D2846 |
| 1/2" - 2" | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Taichung, Taiwan
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Valves+ @ [G] |
PVC I-G1 |
NIBCO |
ASTM F1970 |
|
4660-S (Socket End) Compact Ball Valves |
|||
| 1/2" thru 4" | |||
|
4660-T (Threaded End) Comapct Ball Valves |
|||
| 1/2" thru 4" | |||
|
S45CE-E (Solvent Weld) |
|||
| 1/2" thru 2" | |||
|
S45CE-V (Solvent Weld) |
|||
| 1/2" thru 2" | |||
|
T45CE-E (Threaded End) |
|||
| 1/2" thru 2" | |||
|
T45CE-V (Threaded End) |
|||
| 1/2" thru 2" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. @ PVC Valves rated at 150psi at 73°F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 918
Processing time was 1 seconds


