These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=33710&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| North American Pipe Corporation | |
| The Westlake Center | |
| 2801 Post Oak Boulevard, Suite 300 | |
| Houston, TX 77056 | |
| United States | |
| 800-999-7473 | |
| 713-585-2621 |
Facility : Yucca, AZ
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 2" - 12" SDR 21 | |||
| 2" - 12" SDR 26 | |||
* Sockets and gasketed bell ends are not tested or Listed for this production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Greensboro, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed for this production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 1/2" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1 1/4" - 12" SDR 26 | |||
* Sockets and gasketed bell ends are not tested or Listed for this production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing[G] |
PVC 1120 IC-0 |
North American or N. American |
ASTM F480 |
| 2" - 12" Sch 40 | |||
| 2" - 12" SDR 17 | |||
| 2" - 12" SDR 21 | |||
| 4" - 12" SDR 26 | |||
| 4" - 12" SDR 41 | |||
| 6 1/4" DR 27.6 | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Litchfield, IL
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1" - 14" SDR 17 | |||
| 1" - 14" SDR 21 | |||
| 1" - 14" SDR 26 | |||
| 1" - 12" SDR 13.5 | |||
| 1 1/2" - 12" SDR 32.5 | |||
| 3" - 12" SDR 41 | |||
| 15" SDR 21** | |||
|
15" - 27" SDR 26** |
|||
|
15" - 27" SDR 32.5** |
|||
|
15" - 27" SDR 35** |
|||
|
15" - 27" SDR 41** |
|||
** Having other than IPS outside diameter (PIP OD). * Sockets and gasketed bell ends are not tested or Listed by NSF for this
production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1 1/2" - 12" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Booneville, MS
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed ball ends are not tested or Listed by NSF for this production
facility.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1 1/4" - 12" SDR 32.5 | |||
| 1" - 12" SDR 26 | |||
| 1/2" - 6" SDR 13.5 | |||
| 3" - 12" SDR 41 | |||
| 3/4" - 12" SDR 21 | |||
| 3/4" - 12" SDR 17 | |||
| 4" - 12" SDR 64 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed ball ends are not tested or Listed by NSF for this production
facility.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Leola, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 12" Sch 80 | |||
| 1/2" - 12" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1" - 12" SDR 26 | |||
| 1/2" - 1" SDR 13.5 | |||
| 3/4" - 12" SDR 21 | |||
| 3/4" - 12" SDR 17 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing* [G] |
PVC 1120 IC-O |
North American or N. American |
ASTM F480 |
| 2" - 12" Sch 40 | |||
| 4 1/2" SDR 17 | |||
| 6 1/4" DR 27.6 | |||
| 6 1/8" ID SDR 21 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Wichita Falls, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1/2" - 6" SDR 13.5 | |||
| 3/4" - 16" SDR 17 | |||
| 3/4" - 16" SDR 21 | |||
| 1" - 16" SDR 26 | |||
| 1 1/4" - 16" SDR 32.5 | |||
| 3" - 16" SDR 41 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell ends are not tested or Listed by NSF for this
production facility.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 16" Sch 40 | |||
| 1/2" - 16" Sch 80 | |||
| 1/2" - 12" Sch 120 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell ends are not tested or Listed by NSF for this
production facility.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing[G] |
PVC 1120 IC-O |
North American or N. American |
ASTM F480 |
| 4" - 16" SDR 41 | |||
| 4" - 16" SDR 32.5 | |||
| 4" - 16" SDR 26 | |||
| 2" - 16" SDR 21 | |||
| 2" - 12" SDR 17 | |||
| 2" - 6" SDR 13.5 | |||
| 2" - 16" Sch 40 | |||
| 2" - 16" Sch 80 | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Janesville, WI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
N. American or North American |
ASTM D1785 |
| 1/2" - 8" Sch 120 | |||
| 1/2" - 12" Sch 80 | |||
| 1/2" - 24" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe* + [G] |
PVC 1120 |
N. American or North American |
ASTM D2241 |
| 1/2" SDR 13.5 | |||
| 3/4" - 20" SDR 21 | |||
| 1 1/4" - 12" SDR 26 | |||
| 3/4" - 12" SDR 17 | |||
| 4" - 18" SDR 41 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe+ [G] |
PVC |
N. American or North American |
AWWA C900 |
| 4" - 6" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing* [G] |
PVC 1120 IC-O |
[N] |
ASTM F480 |
| 4" - 6" Sch 40 | |||
| 4" - 6" SDR 17 | |||
| 4" - 6" SDR 21 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 73
Processing time was 0 seconds