These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=33710&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| North American Pipe Corporation | |
| The Westlake Center | |
| 2801 Post Oak Boulevard, Suite 300 | |
| Houston, TX 77056 | |
| United States | |
| 800-999-7473 | |
| 713-585-2621 |
Facility : Yucca, AZ
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 2" - 12" SDR 21 | |||
| 2" - 12" SDR 26 | |||
* Sockets and gasketed bell ends are not tested or Listed for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Greensboro, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1/2" - 4" SDR 13.5 | |||
| 1/2" - 12" SDR 17 | |||
| 3/4" - 12" SDR 21 | |||
| 1 1/4" - 12" SDR 26 | |||
* Sockets and gasketed bell ends are not tested or Listed for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing[G] |
PVC 1120 IC-0 |
North American or N. American |
ASTM F480 |
| 2" - 12" SDR 17 | |||
| 2" - 12" Sch 40 | |||
| 2" - 12" SDR 21 | |||
| 4" - 12" SDR 41 | |||
| 4" - 12" SDR 26 | |||
| 6 1/4" DR 27.6 | |||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Litchfield, IL
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1" - 14" SDR 17 | |||
| 1" - 14" SDR 21 | |||
| 1" - 14" SDR 26 | |||
| 1" - 12" SDR 13.5 | |||
| 1 1/2" - 12" SDR 32.5 | |||
| 3" - 12" SDR 41 | |||
| 15" SDR 21** | |||
|
15" - 27" SDR 26** |
|||
|
15" - 27" SDR 32.5** |
|||
|
15" - 27" SDR 35** |
|||
|
15" - 27" SDR 41** |
|||
** Having other than IPS outside diameter (PIP OD). * Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1 1/2" - 12" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Booneville, MS
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 12" Sch 80 | |||
| 1/2" - 12" Sch 40 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed ball ends are not tested or Listed by NSF for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1 1/4" - 12" SDR 32.5 | |||
| 1" - 12" SDR 26 | |||
| 1/2" - 6" SDR 13.5 | |||
| 3" - 12" SDR 41 | |||
| 3/4" - 12" SDR 21 | |||
| 3/4" - 12" SDR 17 | |||
| 4" - 12" SDR 64 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed ball ends are not tested or Listed by NSF for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Leola, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 12" Sch 40 | |||
| 1/2" - 12" Sch 80 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1" - 12" SDR 26 | |||
| 1/2" - 1" SDR 13.5 | |||
| 3/4" - 12" SDR 21 | |||
| 3/4" - 12" SDR 17 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing* [G] |
PVC 1120 IC-O |
North American or N. American |
ASTM F480 |
| 2" - 12" Sch 40 | |||
| 4 1/2" SDR 17 | |||
| 6 1/4" DR 27.6 | |||
| 6 1/8" ID SDR 21 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Wichita Falls, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D2241 |
| 1/2" - 6" SDR 13.5 | |||
| 3/4" - 16" SDR 17 | |||
| 3/4" - 16" SDR 21 | |||
| 1" - 16" SDR 26 | |||
| 1 1/4" - 16" SDR 32.5 | |||
| 3" - 16" SDR 41 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe+ ** [G] |
PVC 1120 |
North American or N. American |
ASTM D1785 |
| 1/2" - 16" Sch 40 | |||
| 1/2" - 16" Sch 80 | |||
| 1/2" - 12" Sch 120 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing[G] |
PVC 1120 IC-O |
North American or N. American |
ASTM F480 |
| 4" - 16" SDR 41 | |||
| 4" - 16" SDR 32.5 | |||
| 4" - 16" SDR 26 | |||
| 2" - 16" SDR 21 | |||
| 2" - 12" SDR 17 | |||
| 2" - 6" SDR 13.5 | |||
| 2" - 16" Sch 40 | |||
| 2" - 16" Sch 80 | |||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Janesville, WI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* + [G] |
PVC 1120 |
N. American or North American |
ASTM D1785 |
| 1/2" - 8" Sch 120 | |||
| 1/2" - 12" Sch 80 | |||
| 1/2" - 24" Sch 40 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Pipe* + [G] |
PVC 1120 |
N. American or North American |
ASTM D2241 |
| 1/2" SDR 13.5 | |||
| 3/4" - 20" SDR 21 | |||
| 1 1/4" - 12" SDR 26 | |||
| 3/4" - 12" SDR 17 | |||
| 4" - 18" SDR 41 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard |
Well Casing* [G] |
PVC 1120 IC-O |
[N] |
ASTM F480 |
| 4" - 6" Sch 40 | |||
| 4" - 6" SDR 17 | |||
| 4" - 6" SDR 21 | |||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 72
Processing time was 0 seconds