These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=34910&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Mexichem Colombia SAS 
Autopista Sur No. 71-75
Bogota 
Colombia 
57 1 782 5000

Facility : Bogota, Colombia

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+ [G]

PVC

PAVCO

ASTM D2466

Slip Tee (Slip x Slip x Slip) Sch 40
1/2" x 1/2" x 1/2" 411010 3/4" x 3/4" x 3/4" 411020
1" x 1" x 1" 411030 1 1/4" x 1 1/4" x 1 1/4" 411040
1 1/2" x 1 1/2" x 1 1/2" 411050 2" x 2" x 2" 411060
2 1/2" x 2 1/2" x 2 1/2" 411070 3" x 3" x 3" 411080
4" x 4" x 4" 411090

Slip Tee Reducing (Slip x Slip x Slip Reducing) Sch 40
3/4" x 3/4" x 1/2" 411021 1" x 1" x 1/2" 411031
1" x 1" x 3/4" 411032

Slip Elbow 90° (Slip x Slip) Sch 40
1/2" x 1/2" 412010 3/4" x 3/4" 412020
1" x 1" 412030 1 1/4" x 1 1/4" 412040
1 1/2" x 1 1/2" 412050 2" x 2" 412060
2 1/2" x 2 1/2" 412070 3" x 3" 412080
4" x 4" 412090

Slip Elbow 45° (Slip x Slip) Sch 40
1/2" x 1/2" 412510 3/4" x 3/4" 412520
1" x 1" 412530 1 1/4" x 1 1/4" 412540
1 1/2" x 1 1/2" 412550 2" x 2" 412560
2 1/2" x 2 1/2" 412570 3" x 3" 412580
4" x 4" 412590

Slip Coupling (Slip x Slip) Sch 40
1/2" x 1/2" 413010 3/4" x 3/4" 413020
1" x 1" 413030 1 1/4" x 1 1/4" 413040
1 1/2" x 1 1/2" 413050 2" x 2" 413060
2 1/2" x 2 1/2" 413070 3" x 3" 413080
4" x 4" 413090

Female Adapter (Slip x FIPT) Sch 40
1/2" x 1/4" 413410 1/2"x 3/8" 413411
1/2" x 1/2" 413510 3/4" x 3/4" 413520
1" x 1" 413530 1 1/4" x 1 1/4" 413540
1 1/2" x 1 1/2" 413550 2" x 2" 413460
2 1/2" x 2 1/2" 413570 3" x 3" 413580
4" x 4" 413590

Male Adapter (Slip x MPT) Sch 40
1/2" x 1/2" 414010 3/4" x 3/4" 414020
1" x 1" 414030 1 1/4" x 1 1/4" 414040
1 1/2" x 1 1/2" 414050 2" x 2" 414060
2 1/2" x 2 1/2" 414070 3" x 3" 414080
4" x 4" 414090

Slip Cap (Slip) Sch 40
1/2" 415010 3/4" 415020
1" 415030 1 1/4" 415040
1 1/2" 415050 2" 415060
2 1/2" 415070 3" 415080
4" 415090

Cap (FIPT) Sch 40
1/2" 415510 3/4" 415520
1" 415530 1 1/4" 415540
1 1/2" 415550 2" 415560
2 1/2" 415570 3" 415580
4" 415590

Reducing Bushing (Slip x Slip) Sch 40
3/4" x 1/2" 416021 1" x 1/2" 416031
1" x 3/4" 416032 1 1/4" x 1/2" 416041
1 1/4" x 3/4" 416042 1 1/4" x 1" 416043
1 1/2" x 1/2" 416051 1 1/2" x 3/4" 416052
1 1/2" x 1" 416053 1 1/2" x 1 1/4" 416054
2" x 1/2" 416061 2" x 3/4" 416062
2" x 1" 416063 2" x 1 1/4" 416064
2" x 1 1/2" 416065 2 1/2" x 1 1/2" 416075
2 1/2" x 2" 416076 3" x 2" 416086
3" x 2" 416087 4" x 2" 416096
4" x 2" 416097 4" x 3" 416098

Reducing Bushing (Slip x FIPT) Sch 40
1/2" x 1/4" 416510 1/2" x 3/8" 416511
3/4" x 1/2" 416521 1" x 1/2" 416531
1" x 3/4" 416532 1 1/4" x 1/2" 416541
1 1/4" x 3/4" 416542 1 1/4" x 1" 416543
1 1/2" x 1/2" 416551 1 1/2" x 3/4" 416552
1 1/2" x 1" 416553 1 1/2" x 1 1/4" 416554
2" x 1/2" 416561 2" x 3/4" 416562
2" x 1" 416563 2" x 1 1/4" 416564
2" x 1 1/2" 416565 2 1/2" x 1 1/2" 416575
2 1/2" x 2" 416576 3" x 2" 416586
3" x 2 1/2" 416587 4" x 2" 416596
4" x 2 1/2" 416597 4" x 3" 416598

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]

PVC

PAVCO

ASTM D2467

Slip Tee (Slip x Slip x Slip) Sch 80
3" x 3" x 3" 4" x 4" x 4"

Slip Elbow (Slip x Slip) Sch 80
3" x 3" 4" x 4"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 250
Processing time was 0 seconds