These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=36160&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Performance Pipe 
A Div. of Chevron Phillips Chem Co., LP
5085 West Park Boulevard 
Suite 500 
Plano, TX 75093 
United States 
972-599-6600
Visit this company's website

Facility : Fairfield, IA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 3" SIDR 13.5
1/2" - 3" SIDR 15
1/2" - 2" SIDR 19 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100, or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D3035
1/2" - 24" DR 7
1/2" - 24" DR 9
1/2" - 24" DR 9.3
1/2" - 24" DR 11
1/2" - 24" DR 13.5
1/2" - 24" DR 15.5
1/2" - 24" DR 17
1/2" - 24" DR 21
1/2" - 24" DR 26
1/2" - 24" DR 32.5 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100, or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM F714
3" - 18" SDR 7.3 DR 11
3" - 20" SDR 8.3 DR 13.5
3" - 20", 22", 24" SDR 9
3" - 20", 22" - 30" SDR 9.3
3" - 20", 22" - 36" SDR 11
3" - 36" SDR 13.5
3" - 48" SIDR 15.5
3" - 54" SDR 17
3" - 54" SDR 21
3" - 54" SDR 26
3" - 54" SDR 32.5
3" - 54" SDR 41 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100, or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100, or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
AWWA C901
1/2" - 3" SIDR 5.3
1/2" - 3" SIDR 7
1/2" - 3" SIDR 9
3/4" - 3" SIDR 11.5
2" - 3" SIDR 15
2" - 3" SIDR 19
1/2" - 3" SDR 7.3
1/2" - 3" SDR 9
1/2" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100, or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 3408/PE 4710
DriscoPlex PW
AWWA C906
4" - 63" DR 7.3
4" - 63" DR 9
4" - 63" DR 9.3
4" - 63" DR 11
4" - 63" DR 13.5
4" - 63" DR 15.5
4" - 63" DR 17
4" - 63" DR 21
4" - 63" DR 26
4" - 63" DR 32.5 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100, or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.

Facility : Williamstown, KY

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 3" SIDR 11.5
1/2" - 3" SIDR 15
1/2" - 2" SIDR 19 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D3035
1/2" - 24" DR 7
1/2" - 24" DR 9
1/2" - 24" DR 9.3
1/2" - 24" DR 11
1/2" - 24" DR 13.5
1/2" - 24" DR 15.5
1/2" - 24" DR 17
1/2" - 24" DR 21
1/2" - 24" DR 26
1/2" - 24" DR 32.5 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM F714
3" - 18" SDR 7.3
3" - 20" SDR 8.3
3" - 20", 22", 24" SDR 9
3" - 20", 22" - 30" SDR 9.3
3" - 20", 22" - 36" SDR 11
3" - 36" SDR 13.5
3" - 48" SDR 15.5
3" - 54" SDR 17
3" - 54" SDR 21
3" - 54" SDR 26
3" - 54" SDR 32.5
3" - 54" SDR 41 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
AWWA C901
1/2" - 3" SIDR 5.3
1/2" - 3" SIDR 7
1/2" - 3" SIDR 9
3/4" - 3" SIDR 11.5
2" - 3" SIDR 15
2" - 3" SIDR 19
1/2" - 3" SDR 7.3
1/2" - 3" SDR 9
1/2" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * + [G]
PE 3408/PE 4710
DriscoPlex PW
AWWA C906
4" - 63" DR 7.3
4" - 63" DR 9
4" - 63" DR 9.3
4" - 63" DR 11
4" - 63" DR 13.5
4" - 63" DR 15.5
4" - 63" DR 17
4" - 63" DR 21
4" - 63" DR 26
4" - 63" DR 32.5 

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Hagerstown, MD

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 3" SIDR 11.5
1/2" - 3" SIDR 15
1/2" - 2" SIDR 19 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D3035
1/2" - 24" DR 7
1/2" - 24" DR 9
1/2" - 24" DR 9.3
1/2" - 24" DR 11
1/2" - 24" DR 13.5
1/2" - 24" DR 15.5
1/2" - 24" DR 17
1/2" - 24" DR 21
1/2" - 24" DR 26
1/2" - 24" DR 32.5 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM F714
3" - 18" SDR 7.3
3" - 20" SDR 8.3
3" - 20", 22", 24" SDR 9
3" - 20", 22" - 30" SDR 9.3
3" - 20", 22" - 36" SDR 11
3" - 36" SDR 13.5
3" - 48" SDR 15.5
3" - 54" SDR 17
3" - 54" SDR 21
3" - 54" SDR 26
3" - 54" SDR 32.5
3" - 54" SDR 41 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PE 4710
DriscoPlex PW
AWWA C901
1/2" - 3" SIDR 5.3
1/2" - 3" SIDR 7
1/2" - 3" SIDR 9
3/4" - 3" SIDR 11.5
2" - 3" SIDR 15
2" - 3" SIDR 19
1/2" - 3" SDR 7.3
1/2" - 3" SDR 9
1/2" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21 

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * + [G]
PE 3408/PE 4710
DriscoPlex PW
AWWA C906
4" - 63" DR 7.3
4" - 63" DR 9
4" - 63" DR 9.3
4" - 63" DR 11
4" - 63" DR 13.5
4" - 63" DR 15.5
4" - 63" DR 17
4" - 63" DR 21
4" - 63" DR 26
4" - 63" DR 32.5 

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 159
Processing time was 0 seconds