These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=37790&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
John Guest Ltd 
Horton Road
West Drayton, Middlesex UB7 8JL 
United Kingdom 
44 18 95 449 233
Visit this company's website

Facility : Maidenhead, United Kingdom

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe# ^ § +++ [G]

PEX 5006

US1/2PEX-100F-B

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1/2PEX-100F-B

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US1/2PEX-100F-R

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1/2PEX-100F-R

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US1/2PEX-100F-W

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1/2PEX-100F-W

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US1/2PEX-10X10-B

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1/2PEX-10X10-B

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US1/2PEX-10X10-R

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1/2PEX-10X10-R

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US1/2PEX-10X10-W

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1/2PEX-10X10-W

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US1PEX-10X100-B

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US1PEX-10X100-B

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US3/4PEX-100F-B

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US3/4PEX-100F-B

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US3/4PEX-100F-R

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US3/4PEX-100F-R

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US3/4PEX-100F-W

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US3/4PEX-100F-W

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US3/4PEX-10X10-B

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US3/4PEX-10X10-B

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US3/4PEX-10X10-R

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US3/4PEX-10X10-R

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ § +++ [G]

PEX 5006

US3/4PEX-10X10-W

ASTM F876/F877
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# ^ ¢ § +++ [G]

PEX 5006

US3/4PEX-10X10-W

CSA B137.5
1/2" - 1"

# Certified colors are blue, red, and white. B, R, and W represent blue, red, and white
  tubing. 100F and 10X10 refer to packaging.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Middlesex, United Kingdom

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings# § +++ [G]

MLTPL

Speedfit

ASTM F877
1/2" - 1" (PEI45X) 1/2" - 1" (1/2SC) 1/2" - 1" (3/4SC) 1/2" - 1" (NC2521)
1/2" - 1" (PEI02X) 1/2" - 1" (PEI03X) 1/2" - 1" (PEI04X) 1/2" - 1" (PEI06X)
1/2" - 1" (PEI20X) 1/2" - 1" (PEI21X) 1/2" - 1" (PEI222828) 1/2" - 1" (PEI30X)
1/2" - 1" (PEI53X) 1/2" - 1" (PEIBTCX) 1/2" - 1" (PEISTCX) 1/2" - 1" (PSEI46X)
1/2" - 1" (STSIX) 1/2" - 1" (TSIX)

# X may represent catalogue series number, outer diameter tube size, thread type and size,
  and/or body color. Each may be designated by the following: 
  
  Catalogue series number = 01 - 49 
  OD tube size = 02 - 22 
  Thread type and size = 01 - 38 
  Color = B (blue), Br (brown), E (black), G (green), N (natural), R (red), S (standard
  two tone grey), W (white), Y (yellow) 
  
  Body Color may be W (white) or E (black). 
  
  All suffixes may or may not be included in the fitting trade name.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# ¢ +++ [G]

MLTPL

Speedfit

CSA B137.5
1/2" - 1" (PEI45X) 1/2" - 1" (1/2SC) 1/2" - 1" (3/4SC) 1/2" - 1" (NC2521)
1/2" - 1" (PEI02X) 1/2" - 1" (PEI03X) 1/2" - 1" (PEI04X) 1/2" - 1" (PEI06X)
1/2" - 1" (PEI20X) 1/2" - 1" (PEI21X) 1/2" - 1" (PEI222828) 1/2" - 1" (PEI30X)
1/2" - 1" (PEI53X) 1/2" - 1" (PEIBTCX) 1/2" - 1" (PEISTCX) 1/2" - 1" (STSIX)
1/2" - 1" (TSIX)

# X may represent catalogue series number, outer diameter tube size, thread type and size,
  and/or body color. Each may be designated by the following: 
  
  Catalogue series number = 01 - 49 
  OD tube size = 02 - 22 
  Thread type and size = 01 - 38 
  Color = B (blue), Br (brown), E (black), G (green), N (natural), R (red), S (standard
  two tone grey), W (white), Y (yellow) 
  
  Body Color may be W (white) or E (black). 
  
  All suffixes may or may not be included in the fitting trade name.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Non-Repeating Fittings* § +++ [G]

MLTPL

Speedfit

ASTM F877
1/2" x 1/2" (MWI012024LF) 1/2" x 1/2" (MWI052024LF) 1/2" x 1/2" (MWI502034LF) 1/2" x 3/4" (MWI012026LF)
3/4" x 3/4" (MWI012826LF) 3/4" x 3/4" (MWI052826LF)

* LF Suffix - Eco Brass
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Non-Repeating Fittings* § +++ [G]

MLTPL

Speedfit

CSA B137.5

Brass Body Straight Adapters
MWI012024-LF 1/2" CTS x 1/2" NPT MWI012026-LF 1/2" CTS x 3/4" NPT MWI012826-LF 3/4" CTS x 3/4" NPT

Brass Female Stem Adapter
MWI502034-LF 1/2" CTS x 1/2" NPSM Female Stem Adapter

Brass Male Stem Adapter
MWI052024-LF 1/2" CTS x 1/2" NPT Male Stem Adapter MWI052826-LF 3/4" CTS x 3/4" NPT Male Stem Adapter
1/2" x 1/2" (MWI012024LF) 1/2" x 1/2" (MWI052024LF) 1/2" x 1/2" (MWI502034LF) 1/2" x 3/4" (MWI012026LF)
3/4" x 3/4" (MWI012826LF) 3/4" x 3/4" (MWI052826LF)

* LF Suffix - Eco Brass
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 79
Processing time was 0 seconds