These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=37850&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Georg Fischer Sloane, LLC 
7777 Sloane Drive
Little Rock, AR 72206 
United States 
800-423-2686 
501-490-7247
Visit this company's website

Facility : Little Rock, AR

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+ *** [G]
PVC I-G1
+GF+ or GSR
ASTM D2464

45° Ell, T x T
819-xxx 1/4" - 4"

90° Ell, S x T
807-xxx 1/2" - 3"

90° Ell, T x T
808-xxx 1/4" - 4"

Cap, T
848-xxx 1/4" - 4"

Coupling, T x T
830-xxx 1/4" - 4"

Female Adapter, S x T
835-xxx 1/4" - 4"

Male Adapter, S x MT
836-xxx 1/2" - 4"

Nipple, MT x MT
861-xxx 1/2" - 3"

Plug, MT
850-xxx 1/4" - 4"

Reducer Bushing, MT x T
839-xxx 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8"
3/4" x 1/4" 3/4" x 3/8" 3/4" x 1/2" 1" x 1/4"
1" x 1/2" 1" x 3/4" 1 1/4" x 1/2" 1 1/4" x 3/4"
1 1/4" x 1" 1 1/2" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4"
2" x 1/2" 2" x 3/4" 2" x 1" 2" x 1 1/4"
2" x 1 1/2" 3" x 2" 4" x 2" 4" x 3"

Reducer Bushing, Spg x T
838-xxx 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8"
3/4" x 1/4" 3/4" x 1/2" 1" x 1/2" 1" x 3/4"
1 1/4" x 1/2" 1 1/4" x 3/4" 1 1/4" x 1" 1 1/4" x 1/2"
1 1/4" x 1 1/4" 1 1/2" x 1/2" 1 1/2" x 3/4" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4" 2" x 1"
2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 1 1/2" 2 1/2" x 2"
3" x 2" 3" x 2 1/2" 4" x 2" 4" x 3"

Reducer Coupling, T x T
830-xxx 3/8" x 1/4" 3/4" x 1/2" 1/2" x 3/8"
1/2" x 3/4" 1/2" x 1/4" 1" x 1/2" 1" x 3/4"
1 1/4" x 3/4" 1 1/2" x 1" 2" x 1 1/2"

Tees, S x S x T
802-xxx 1/2" - 2"

Tees, T x T x T
805-xxx 1/4" - 4" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
*** -xxx Suffix designates nominal size
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ *** [G]
PVC I-G1
+GF+ or GSR
ASTM D2466

45° Ell, S x S
417-xxx 1/2" - 8"

90° Ell, S x FT
407-xxx 1/2" - 2"

90° Ell, S x S
406-xxx 1/2" - 8"

90° Ell, S x T
407-xxx 1/2" x 3/4" 1" x 3/4" 3/4" x 1/2"
1 1/4" x 1" 1" x 1/2" 1 1/2" x 1"

90° Ell, T x T
408-xxx 1/2" - 1 1/4"

90° Reducing Ell, S x S
406-xxx 3/4" x 1/2" 1 1/4" x 1" 1" x 1/2"
1 1/2" x 1" 1" x 3/4"

90° Street Ell, MT x FT
412-xxx 1/2" - 2"

90° Street Ell, Mt x S
410-xxx 1/2" - 2"

90° Street Ell, Spg x S
409-xxx 1/2" - 2"

Cap, S
447-xxx 1/2" - 12"

Cap, T
448-xxx 1/2" - 6"

Coupling, S x S
429-xxx 1/2" - 12" 3/4" x 1/2" 1" x 3/4"

Coupling, T x T
430-xxx 1/2" - 1"

Crosses, S x S x S x S
420-xxx 1/2" - 2" 2 1/2" x 2 1/2" x 2 1/2" x 1 1/2" 3" x 3" x 1 1/2" x 1 1/2"
4" x 4" x 1" x 1" 4" x 4" x 2" x 2" 3" x 3" x 1" x 1" 3" x 3" x 2" x 2"
4" x 4" x 1 1/2" x 1 1/2"

Female Adapter, S x T
435-xxx 1/2" - 8" 3/4" x 1/2" 3/4" x 1"
1" x 3/4"

Male Adapter, MT x S
436-xxx 1/2" - 6" 1/2" x 3/4" 3/4" x 1/2"
3/4" x 1" 1" x 3/4" 1" x 1 1/4" 1 1/4" x 1"
1 1/4" x 1 1/2" 1 1/2" x 1 1/4" 1 1/2" x 2" 2" x 1 1/2"
3" x 4"

Plug, MT
450-xxx 1/2" - 4"

Plug, S
449-xxx 1/2" - 4"

Reducer Bushing, MT x T
439-xxx 1/2" x 3/8" 3/4" x 1/2" 1" x 3/4"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1" 2" x 1 1/2"

Reducer Bushing, Spg x S
437-xxx 3/4" x 1/2" 1" x 1/2" 1" x 3/4"
1 1/4" x 1/2" 1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2"
1 1/2" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4" 1 1/2" x 1"
2" x 1/2" 2" x 3/4" 2" x 1" 2" x 1 1/4"
2" x 1 1/2" 2 1/2" x 3/4" 2 1/2" x 1" 2 1/2" x 1 1/4"
2 1/2" x 1 1/2" 2 1/2" x 2" 3" x 1" 3" x 1 1/4"
3" x 1 1/2" 3" x 2" 3" x 2 1/2" 4" x 2"
4" x 2 1/2" 4" x 3" 5" x 4" 6" x 3"
6" x 4" 6" x 5" 8" x 2" 8" x 4"
8" x 6" 10" x 8"

Reducer Bushing, Spg x T
438-xxx 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/4"
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/4" x 1 1/2" 1 1/2" x 1/2"
1 1/2" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2"
2" x 3/4" 2" x 1" 2" x 1 1/4" 2" x 1 1/2"
2 1/2" x 1 1/2" 2 1/2" x 2" 3" x 3/4" 3" x 1"
3" x 2" 3" x 2 1/2" 4" x 1" 4" x 2"
4" x 2 1/2" 4" x 3" 6" x 4"

Reducing Tee, S x S x S
401-xxx 1/2" x 1/2" x 3/4" 1/2" x 1/2" x 1" 3/4" x 1/2" x 1/2"
3/4" x 1/2" x 3/4" 3/4" x 3/4" x 1/2" 3/4" x 3/4" x 1" 1" x 1/2" x 1"
1" x 3/4" x 1/2" 1" x 3/4" x 3/4" 1" x 1" x 1/2" 1" x 1" x 3/4"
1" x 1" x 1 1/4" 1" x 1" x 1 1/2" 1 1/4" x 1" x 1/2" 1 1/4" x 1" x 1"
1 1/4" x 1 1/4" x 1/2" 1 1/4" x 1 1/4" x 3/4" 1 1/4" x 1 1/4" x 1" 1 1/4" x 1 1/4" x 1 1/2"
1 1/4" x 1 1/4" x 2" 1 1/2" x 1 1/4" x 1/2" 1 1/2" x 1 1/4" x 1/2" 1 1/2" x 1 1/4" x 3/4"
1 1/2" x 1 1/4" x 1" 1 1/2" x 1 1/2" x 1/2" 1 1/2" x 1 1/2" x 3/4" 1 1/2" x 1 1/2" x 1"
1 1/2" x 1 1/2" x 1 1/4" 1 1/2" x 1 1/2" x 2" 2" x 1/2" x 3/4" 2" x 1 1/2" x 1"
2" x 2" x 1/2" 2" x 2" x 3/4" 2" x 2" x 1" 2" x 2" x 1 1/4"
2" x 2" x 1 1/2" 2 1/2" x 2 1/2" x 1/2" 2 1/2" x 2 1/2" x 3/4" 2 1/2" x 2 1/2" x 1"
3" x 3" x 1/2" 3" x 3" x 3/4" 3" x 3" x 1" 3" x 3" x 1 1/4"
3" x 3" x 1 1/2" 3" x 3" x 2" 4" x 4" x 1/2" 4" x 4" x 3/4"
4" x 4" x 1" 4" x 4" x 1 1/4" 4" x 4" x 1 1/2" 4" x 4" x 2"
4" x 4" x 3" 6" x 6" x 2" 6" x 6" x 3" 6" x 6" x 4"
8" x 8" x 3" 8" x 8" x 4"

Reducing Tee, S x S x T
402-xxx 1/2" x 1/2" x 3/4" 3/4" x 1/2" x 1/2" 3/4" x 1/2" x 3/4"
3/4" x 3/4" x 1/2" 1" x 3/4" x 1/2" 1" x 1" x 1/2" 1" x 1" x 3/4"
1 1/4" x 1" x 1/2" 1 1/4" x 1" x 1" 1 1/4" x 1 1/4" x 1/2" 1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1 1/4" x 1" 1 1/2" x 1 1/4" x 1/2" 1 1/2" x 1 1/4" x 3/4" 1 1/2" x 1 1/4" x 1"
1 1/2" x 1 1/2" x 3/4" 1 1/2" x 1 1/2" x 1" 1 1/2" x 1 1/2" x 1/2" 1 1/2" x 1 1/2" x 3/4"
1 1/2" x 1 1/2" x 1" 1 1/2" x 1 1/2" x 1 1/4" 2" x 1 1/2" x 3/4" 2" x 1 1/2" x 1"
2" x 2" x 1/2" 2" x 2" x 3/4" 2" x 2" x 1" 2" x 2" x 1 1/4"
2" x 2" x 1 1/2" 2 1/2" x 2 1/2" x 3/4" 2 1/2" x 2 1/2" x 1" 4" x 4" x 3"
6" x 6" x 3"

Tee, S x S x S
401-xxx 1/2" - 8"

Tee, S x S x T
402-xxx 1/2" - 2" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
*** -xxx Suffix designates nominal size
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ @ *** [G]
PVC I-G1
+GF+ or GSR
ASTM D2467

45° Ell, S x S
817-xxx 1/4" - 8"

90° Ell, S x S
806-xxx 1/4" - 8"

Cap, S
847-xxx 1/4" - 12"

Coupling, S x S
829-xxx 1/4" - 12"

Reducer Bushing, Spg x S
837-xxx 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/2"
1" x 1/2" 1" x 3/4" 1 1/4" x 1/2" 1 1/4" x 3/4"
1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4" 2" x 1"
2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 1 1/2" 2 1/2" x 2"
3" x 1 1/2" 3" x 2" 3" x 2 1/2" 4" x 2"
4" x 3" 6" x 3" 6" x 4" 8" x 6"
10" x 6" 10" x 8" 12" x 8" 12" x 10"

Reducer Coupling, S x S
829-xxx 3/4" x 1/2" 1" x 1/2" 1" x 3/4"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 3/4" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 1" 2" x 1 1/4" 2" x 1 1/2"
2 1/2" x 1 1/2" 3" x 2" 4" x 3" 6" x 4"
8" x 6"

Reducing Tee, S x S x S
801-xxx 3/4" x 3/4" x 1/2" 1" x 1" x 1/2" 1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1" 1 1/2" x 1 1/2" x 1/2" 1 1/2" x 1 1/2" x 3/4" 1 1/2" x 1 1/2" x 1"
1 1/2" x 1 1/2" x 1 1/4" 2" x 2" x 1/2" 2" x 2" x 3/4" 2" x 2" x 1"
2" x 2" x 1 1/2" 2 1/2" x 2 1/2" x 2" 3" x 3" x 1 1/2" 3" x 3" x 2"
4" x 4" x 2" 4" x 4" x 3" 6" x 6" x 4" 8" x 8" x 6"

Tee, S x S x S
801-xxx 1/4" - 8" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ Fittings or systems to be installed in accordance with the manufacturer's instructions,
  ASTM Standard and latest edition of Uniform Plumbing Code.
*** -xxx Suffix designates nominal size
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ @ *** [G]
PVC I-G1
+GF+ or GSR
ASTM D2467

45° Ell, T x T
819-xxx 1/4" - 4"

90° Ell, S x T
807-xxx 1/2" - 3"

90° Ell, T x T
808-xxx 1/4" - 4"

Cap, T
848-xxx 1/4" - 4

Coupling, T x T
830-xxx 1/4" - 4"

Female Adapter, S x T
835-xxx 1/4" - 4"

Male Adapter, S x T
836-xxx 1/2" - 4"

Nipple, MT x MT
861-xxx 1/2" x 3"

Plug, MT
850-xxx 1/4" - 4"

Reducer Bushing, MT x T
839-xxx 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8"
3/4" x 1/4" 3/4" x 3/8" 3/4" x 1/2" 1" x 1/4"
1" x 1/2" 1" x 3/4" 1 1/4" x 1/2" 1 1/4" x 3/4"
1 1/4" x 1" 1 1/2" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4"
2" x 1/2" 2" x 3/4" 2" x 1" 2" x 1 1/4"
2 1/2" x 2" 3" x 2" 4" x 2" 4" x 3"

Reducer Bushing, Spg x T
838-xxx 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8"
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 1 1/2"
2 1/2" x 2" 3" x 2" 3" x 2 1/2" 4" x 2"

Reducer Coupling, T x T
830-xxx 3/8" x 1/4" 3/4" x 1/2" 1 1/4" x 3/4"
1/2" x 1/4" 1" x 1/2" 1 1/2" x 1" 1/2" x 3/4"
1" x 3/4" 2" x 1 1/2"

Tees, S x S x T
802-xxx 1/2" - 2"

Tees, T x T x T
805-xxx 1/4" - 4" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ Fittings or systems to be installed in accordance with the manufacturer's instructions,
  ASTM Standard and latest edition of Uniform Plumbing Code.
*** -xxx Suffix designates nominal size
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings@ *** +++ [G]
CPVC 41
+GF+ or GSR
ASTM F439

45° Ell, S x S
9817-xxx 1/4" - 8"

90° Ell, S x S
9806-xxx 1/4" - 8"

Cap, S
9847-xxx 3/8" - 12"

Coupling, S x S
9829-xxx 1/4" - 12"

Reducer Bushing, Spg x S
9837-xxx 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/2"
1" x 1/2" 1" x 3/4" 1 1/4" x 1/2" 1 1/4" x 3/4"
1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4" 2" x 1"
2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 1 1/2" 2 1/2" x 2"
3" x 1 1/2" 3" x 2" 3" x 2 1/2" 4" x 2"
4" x 3" 6" x 4" 8" x 6" 10" x 6"
10" x 8" 12" x 10"

Reducer Coupling, S x S
9829-xxx 1/2" x 3/8" 3/4" x 1/2" 1" x 1/2"
1" x 3/4" 1 1/4" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 1 1/2"
3" x 2" 4" x 3" 6" x 4" 8" x 6"

Reducing Tee, S x S x S
9801-xxx 3/4" x 3/4" x 1/2" 1" x 1" x 1/2" 1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1" 1 1/2" x 1 1/2" x 3/4" 1 1/2" x 1 1/2" x 1" 1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2" 2" x 2" x 1/2" 2" x 2" x 3/4" 2" x 2" x 1"
2" x 2" x 1 1/2" 2 1/2" x 2 1/2" x 2" 3" x 3" x 1 1/2" 3" x 3" x 2"
4" x 4" x 2" 4" x 4" x 3" 6" x 4" 8" x 8" x 6"

Tee, S x S x S
9801-xxx 1/4" - 8" 

@ Fittings or systems to be installed in accordance with the manufacturer's instructions,
  ASTM Standard and latest edition of Uniform Plumbing Code.
*** -xxx Suffix designates nominal size
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings*** +++ [G]
CPVC 41
+GF+ or GSR
ASTM F437

45° Ell, T x T
9819-xxx 1/4" - 4"

90° Ell, T x T
9808-xxx 1/4" - 4"

Cap, T
9848-xxx 1/4" - 4"

Coupling, T x T
9830-xxx 1/4" - 4"

Female Adapter, S x T
9835-xxx 1/4" - 4"

Male Adapter, S x MT
9836-xxx 1/2" - 4"

Nipple, MT x MT
9861-xxx 1/4" - 2"

Plug, MT
9850-xxx 1/4" - 4"

Reducer Bushing, MT x T
9839-xxx 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8"
3/4" x 3/8" 3/4" x 1/2" 1" x 1/2" 1" x 3/4"
1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 3/4" 2" x 1" 2" x 1 1/4"
2" x 1 1/2" 3" x 2" 4" x 3"

Reducer Bushing, Spg x T
9838-xxx 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8"
3/4" x 1/4" 3/4" x 1/2" 1" x 1/2" 1" x 3/4"
1 1/4" x 1/2" 1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2"
1 1/2" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2"
2" x 3/4" 2" x 1" 2" x 1 1/4" 2" x 1 1/2"
2 1/2" x 1 1/2" 2 1/2" x 2" 3" x 2" 4" x 2"
4" x 3"

Reducer Coupling, T x T
9830-xxx 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/2"
1" x 1/2" 1" x 3/4" 1 1/2" x 1"

Tee, T x T x T
9805-xxx 1/4" - 4" 

*** -xxx Suffix designates nominal size
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ @ ^ § [G]
PVC 1120
+GF+ or GSR
ASTM D1785
>= 1/2" Sch 40
>= 1/2" Sch 80 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ Fittings or systems to be installed in accordance with the manufacturer's instructions,
  ASTM Standard and latest edition of Uniform Plumbing Code.
^ Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe@ ˘ § +++ [G]
CPVC 4120
+GF+ or GSR
ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40 

@ Fittings or systems to be installed in accordance with the manufacturer's instructions,
  ASTM Standard and latest edition of Uniform Plumbing Code.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe˘ +++ [G]
CPVC 4120
+GF+ or GSR
CSA B137.6
1 1/4" - 2 1/2" Sch 80
1 1/4" - 2 1/2" Sch 40 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# + [G]
PVC I-G1
+GF+
ASTM F1970

Flange - Van Stone (S) Sch 80
3" 854-030 4" 854-040 6" 854-060 8" 854-080
10" 854-100 12" 854-120 

# Product tested for use in 73°F with a rated pressure of 150 psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]
CPVC
+GF+
ASTM F1970

Flange - Van Stone (S) Sch 80
1/2" 9854-005 3/4" 9854-007 1" 9854-010 1 1/4" 9854-012
1 1/2" 9854-015 2" 9854-020 2 1/2" 9854-025 3" 9854-030
4" 9854-040 6" 9854-060 8" 9854-080 10" 9854-100
12" 9854-120 

# Product tested for use in 73°F with a rated pressure of 150 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 658
Processing time was 0 seconds