These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=38790&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
REHAU Construction LLC 
1501 Edwards Ferry Road, N.E.
Leesburg, VA 20176 
United States 
800-247-9445 
703-777-5255
Visit this company's website

Facility : # 1 Germany

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* ^ +++ [G]

PEX 3306

MUNICIPEX

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ +++ [G]

PEX 3306

MUNICIPEX

AWWA C904
1/2" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

MUNICIPEX

CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ +++ [G]

PEX 3306

MUNICIPEX Protect

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ +++ [G]

PEX 3306

MUNICIPEX Protect

AWWA C904
2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

MUNICIPEX Protect

CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * ^ § +++ [G]

PEX 3006

RAUPEX®

ASTM F876/F877
3/8" - 2" SDR 9

$ Non-barrier pipe.
* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * ^ § +++ [G]

PEX 3006

RAUPEX®

AWWA C904
1/2" - 2" SDR 9

$ Non-barrier pipe.
* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * ^ ˘ § +++ [G]

PEX

RAUPEX®

CSA B137.5
3/8" - 2" SDR 9

$ Non-barrier pipe.
* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

RAUPEX® Blue UV-Shield

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

RAUPEX® Blue UV-Shield

CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

RAUPEX Red UV-Shield

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

RAUPEX Red UV-Shield

CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

RAUPEX White UV-Shield

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

RAUPEX White UV-Shield

CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX 3006

Raupex® Raugeo Grey UV Shield

ASTM F876/F877
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

Raupex® Raugeo Grey UV Shield

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX 3006

Raupex® Raugeo

ASTM F876/F877
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

Raupex® Raugeo

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : # 7 USA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* ^ § +++ [G]

PEX 3306

MUNICIPEX

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

MUNICIPEX

AWWA C904
1/2" - 1 1/4" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

MUNICIPEX

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ +++ [G]

PEX 3306

MUNICIPEX Protect

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ +++ [G]

PEX 3306

MUNICIPEX Protect

AWWA C904
1/2" - 1 1/4" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

MUNICIPEX Protect

CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * ^ § +++ [G]

PEX 3006

RAUPEX®

ASTM F876/F877
3/8" - 2" SDR 9

$ Non-barrier pipe.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * ^ § +++ [G]

PEX 3006

RAUPEX®

AWWA C904
1/2" - 1 1/4" SDR 9

$ Non-barrier pipe.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe$ * ^ ˘ § +++ [G]

PEX

RAUPEX®

CSA B137.5
3/8" - 2"

$ Non-barrier pipe.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

RAUPEX® Blue UV-Shield

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

RAUPEX® Blue UV-Shield

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX 3006

Raupex Raugeo

ASTM F876/F877
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

Raupex Raugeo

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX 3306

Raupex Raugeo Grey UV-Shield

ASTM F876/F877
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

Raupex Raugeo Grey UV-Shield

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

RAUPEX® Red UV-Shield

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

RAUPEX® Red UV-Shield

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ § +++ [G]

PEX 3306

RAUPEX® White UV-Shield

ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* ^ ˘ § +++ [G]

PEX

RAUPEX® White UV-Shield

CSA B137.5
3/8" - 2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : # 11 Switzerland

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe# * ^ § +++ [G]

PEX 3306

Municipex PI

ASTM F876/F877
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ § +++ [G]

PEX 3306

Municipex PI

AWWA C904
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ ˘ § +++ [G]

PEX

Municipex PI

CSA B137.5
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ ˘ § +++ [G]

PEX

Insulpex Blue UV Shield

CSA B137.5
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ § +++ [G]

PEX 3306

Insulpex Blue UV Shield

ASTM F876/F877
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ § +++ [G]

PEX 3306

Insulpex Red UV Shield

ASTM F876/F877
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ ˘ § +++ [G]

PEX

Insulpex Red UV Shield

CSA B137.5
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ § +++ [G]

PEX 3306

Insulpex White UV Shield

ASTM F876/F877
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# * ^ ˘ § +++ [G]

PEX

Insulpex White UV Shield

CSA B137.5
1" - 2" SDR 9

# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 47
Processing time was 0 seconds