These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=39740&Standard=014&LowLead=Y&



NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Royal Pipe Systems 
A Division of Royal Plastics Inc.
131 Regalcrest Court 
Woodbridge, ON L4L 8P3 
Canada 
800-263-2353 
905-856-7550

Facility : Woodbridge, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [1] [G]

PVC 1120

Royal Pipe Systems

ASTM D1785
1/8" - 12" Sch 40
1/8" - 12" Sch 80
1/2" - 12" Sch 120

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
    production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [1] [G]

PVC 1120

Royal Pipe Systems

ASTM D2241
1/8" - 6" SDR 13.5
3/4" - 12" SDR 21
1" - 12" SDR 26
1 1/2" - 12" SDR 17

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
    production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [1] [G]

PVC 1120

Chemkor

ASTM D1785
1/8" - 12" Sch 40

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
    production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds