These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=3F450&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Zurn PEX, Inc. | |
| Highway 11 East | |
| Commerce, TX 75428 | |
| United States | |
| 903-886-2580 |
Facility : # 3 Zhejiang Province, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ’ § ++ [G] |
Brass C69300 |
ZurnPex XL |
ASTM F1807 |
|
Coupling - PEX x FPT |
|||
| 1" x 1/2" (QFSC53GFX) | |||
|
Tee - PEX x FPT |
|||
| 3/4" Barb x 3/4" Barb x 1/2" FPT (QFST443BBFGX) | 1" Barb x 1" Barb x 1/2" FPT (QFST553BBFGX) | ||
@ These fittings meet all the requirements under F1807 and F877. ’ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ’ § [G] |
Brass C69300 |
ZurnPex XL |
CSA B137.5 |
|
Coupling - PEX x FPT |
|||
| 1" x 1/2" (QFSC53GFX) | |||
|
Tee - PEX x FPT |
|||
| 3/4" Barb x 3/4" Barb x 1/2" FPT (QFST443BBFGX) | 1" Barb x 1" Barb x 1/2" FPT (QFST553BBFGX) | ||
@ These fittings meet all the requirements under F1807 and F877. ’ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ’ £ § ++ [G] |
Brass C69300 |
ZPEX |
ASTM F1807 |
|
Coupling - PEX x FPT |
|||
| 1" x 1/2" (QFSC53GFX) | |||
|
Hex Nipples - NPT x NPT |
|||
| QXXBC32TGX 1/2" 3/8" | QXXBC33TGX 1/2" 1/2" | QXXBC42TGX 3/4" 3/8" | QXXBC43TGX 3/4" 1/2" |
| QXXBC44TGX 3/4" 3/4" | QXXBC53TGX 1" 1/2" | QXXBC54TGX 1" 3/4" | QXXBC55TGX 1" 1" |
| QXXBC64TGX 1 1/4" 3/4" | QXXBC65TGX 1 1/4" 1" | ||
|
Low Lead Brass Adapter - Barb x M Sweat |
|||
| QQ712GX Adapter 1 1/4" PEX x 1 1/4" Male Sweat | QQ900GX Adapter 1 1/2" PEX x 1 1/2" Male Sweat | QQ975GX Adapter 2" PEX x 2" Male Sweat | |
|
Low Lead Brass Adapter Barb x F Sweat |
|||
| QQ812GX 1 1/4" x 1 1/4" | |||
|
Low Lead Brass Coupling Barb x Barb |
|||
| QQC22GX 3/8" x 3/8" | QQC32GX 1/2" x 3/8" | QQC33GX 1/2" x 1/2" | QQC43GX 3/4" x 1/2" |
| QQC44GX 3/4" x 3/4" | QQC54GX 1" x 3/4" | QQC55GX 1" x 1" | QQC64GX Coupling 1 1/4" x 3/4" PEX |
| QQC65GX 1 1/4" x 1" | QQC66GX 1 1/4" x 1 1/4" | QQ974GX Coupling 1 1/2" x 3/4" PEX | QQMC75GX Coupling 1 1/2" x 1" PEX |
|
Low Lead Brass Drop Ear Elbow Barb x FPT |
|||
| QQDE33BFGX 1/2" x 1/2" | QQDE44BFGX 3/4" x 3/4" | ||
|
Low Lead Brass Elbow Adapter Barb x Female Sweat |
|||
| QQE775GX 3/4" x 3/4" | |||
|
Low Lead Brass Elbow Adapter Barb x Male Sweat |
|||
| QQE675GX 3/4" x 3/4" | |||
|
Low Lead Brass Elbow Barb x Barb |
|||
| QQE33GX 1/2" x 1/2" | QQE43GX 3/4" x 1/2" | QQE44GX 3/4" x 3/4" | QQE55GX 1" x 1" |
| QQE66GX 1 1/4" | |||
|
Low Lead Brass Elbow Barb x MPT |
|||
| QQE33BTGX 1/2" x 1/2" | |||
|
Low Lead Brass Female Swivel Adapter Barb x FPT |
|||
| QXXE33BSGX 1/2" x 1/2" | QXXSFC23GX 3/8" x 1/2" | QXXSFC33GX 1/2" x 3/4" | QXXSFC44GX 3/4" x 3/4" |
|
Low Lead Brass Male Adapter Barb x MPT |
|||
| QQMC33GX 1/2" x 1/2" | QQMC34GX 1/2" x 3/4" | QQMC43GX 3/4" x 1/2" | QQMC44GX 3/4" x 3/4" |
| QQMC45GX 3/4" x 1" | QQMC54GX 1" x 3/4" | QQMC55GX 1" x 1" | QQMC65GX 1 1/4" x 1" |
| QQMC66GX 1 1/4" x 1 1/4" | |||
|
Low Lead Brass Non-Swivel Adapter Barb x FPT |
|||
| QQUFC33GX 1/2" x 1/2" | QQUFC34GX 1/2" x 3/4" | QQUFC44GX 3/4" x 3/4" | QQUFC55GX 1" x 1" |
| QQUFC66GX 1 1/4" x 1 1/4" | |||
|
Low Lead Brass Tee |
|||
| QQT222GX 3/8" | QQT333GX 1/2" | QQT444GX 3/4" | QQT555GX 1" |
| QQT666GX 1 1/4" | QQT655GX Tee 1 1/4" x 1 1/4" x 1" PEX | QQT665GX Tee 1 1/4" x 1" x 1" PEX | QQT334GX 1/2" x 1/2" x 3/4" |
| QQT433GX 3/4" x 1/2" x 1/2" | QQT434GX 3/4" x 1/2" x 3/4" | QQT443GX 3/4" x 3/4" x 1/2" | QQT544GX 1" x 3/4" x 1/2" |
| QQT553GX 1" x 1" x 1/2" | QQT554GX 1" x 1" x 3/4" | QQT663GX 1 1/4" x 1 1/4" x 1/2" | QQT664GX 1 1/4" x 1 1/4" x 3/4" |
| QQT765GX Tee 1 1/2" x 1 1/4" x 1" PEX | QQT773GX Tee 1 1/2" x 1 1/2" x 1/2" PEX | QQT776GX Tee 1 1/2" x 1 1/2" x 1 1/4" PEX | QQT883GX Tee 2" x 2" x 1/2" PEX |
| QQT884GX Tee 2" x 2" x 3/4" PEX | QQT887GX Tee 2" x 2" x 1 1/2" PEX | ||
|
Low Lead Brass Test Plug |
|||
| QQP3GX 1/2" | QQP4GX 3/4" | QQP5GX 1" | QQP6GX 1 1/4" |
|
MAN6BARBG - PEX x Swivel Adapter |
|||
| 1" | |||
|
MANPLUGG - Plug Seal |
|||
| 1" | |||
|
MANYBARBG 3/4" PEX x Swivel Adapter |
|||
| 3/4" | |||
@ These fittings meet all the requirements under F1807 and F877. ’ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ £ § ++ [G] |
Brass C69300 |
ZPEX |
ASTM F877 |
|
Coupling - PEX x FPT |
|||
| 1" x 1/2" (QFSC53GFX) | |||
|
Hex Nipples - NPT x NPT |
|||
| QXXBC32TGX 1/2" 3/8" | QXXBC33TGX 1/2" 1/2" | QXXBC42TGX 3/4" 3/8" | QXXBC43TGX 3/4" 1/2" |
| QXXBC44TGX 3/4" 3/4" | QXXBC53TGX 1" 1/2" | QXXBC54TGX 1" 3/4" | QXXBC55TGX 1" 1" |
| QXXBC64TGX 1 1/4" 3/4" | QXXBC65TGX 1 1/4" 1" | ||
|
Low Lead Brass Adapter - Barb x M Sweat |
|||
| QQ712GX Adapter 1 1/4" PEX x 1 1/4" Male Sweat | QQ900GX Adapter 1 1/2" PEX x 1 1/2" Male Sweat | QQ975GX Adapter 2" PEX x 2" Male Sweat | |
|
Low Lead Brass Adapter - Barb x MPT |
|||
| QQMC77GX 1 1/2" x 1 1/2" | QQMC88GX 2" x 2" | ||
|
Low Lead Brass Adapter Barb x F Sweat |
|||
| QQ812GX Adapter 1 1/4" x 1 1/4" Female Sweat | QQ950GX 1 1/2" x 1 1/2" | QQ1050GX 2" x 2" | |
|
Low Lead Brass Coupling Barb x Barb |
|||
| QQC64GX Coupling 1 1/4" x 3/4" PEX | QQC74GX Coupling 1 1/2" x 3/4" PEX | QQC75GX Coupling 1 1/2" x 1" PEX | QQC76GX 1 1/2" x 1 1/4" |
| QQC77GX 1/2" x 1/2" | QQC87GX 2" x 1 1/2" | QQC88GX 2" x 2" | |
|
Low Lead Brass Elbow |
|||
| QQE77GX 1 1/2" | QQE88GX 2" | ||
|
Low Lead Brass Non-Swivel Adapter Barb x FPT |
|||
| QQUFC77GX 1 1/2" x 1 1/2" | |||
|
Low Lead Brass Tee |
|||
| QQT655GX Tee 1 1/4" x 1 1/4" x 1" PEX | QQT665GX Tee 1 1/4" x 1" x 1" PEX | QQT765GX Tee 1 1/2" x 1 1/4" x 1" PEX | QQT773GX Tee 1 1/2" x 1 1/2" x 1/2" PEX |
| QQT774GX 1 1/2" x 1 1/2" x 3/4" | QQT775GX 1 1/2" x 1 1/2" x 1" | QQT776GX Tee 1 1/2" x 1 1/2" x 1 1/4" PEX | QQT777GX 1 1/2" |
| QQT883GX Tee 2" x 2" x 1/2" PEX | QQT884GX Tee 2" x 2" x 3/4" PEX | QQT885GX 2" x 2" x 1" | QQT887GX Tee 2" x 2" x 1 1/2" PEX |
| QQT888GX 2" | |||
|
Low Lead Brass Test Plug |
|||
| QQP7GX 1 1/2" | QQP8GX 2" | ||
|
MAN6BARBG - PEX x Swivel Adapter |
|||
| 1" | |||
|
MANPLUGG - Plug Seal |
|||
| 1" | |||
|
MANYBARBG 3/4" PEX x Swivel Adapter |
|||
| 3/4" | |||
@ These fittings meet all the requirements under F1807 and F877. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ’ £ § ++ [G] |
Brass C69300 |
ZPEX |
CSA B137.5 |
|
Coupling - PEX x FPT |
|||
| 1" x 1/2" (QFSC53GFX) | |||
|
Low Lead Brass Adapter Barb x F Sweat |
|||
| QQ812GX 1 1/4" x 1 1/4" | |||
|
Low Lead Brass Adapter Barb x M Sweat |
|||
| QQ712GX Adapter 1 1/4" PEX x 1 1/4" Male Sweat | QQ900GX Adapter 1 1/2" PEX x 1 1/2" Male Sweat | QQ975GX Adapter 2" PEX x 2" Male Sweat | |
|
Low Lead Brass Adapter Barb x MPT |
|||
| QQMC33GX 1/2" x 1/2" | QQMC34GX 1/2" x 3/4" | QQMC43GX 3/4" x 1/2" | QQMC44GX 3/4" x 3/4" |
| QQMC45GX 3/4" x 1" | QQMC54GX 1" x 3/4" | QQMC55GX 1" x 1" | QQMC66GX 1 1/4" x 1 1/4" |
| QQC74GX Adapter 1 1/4" PEX x 1 1/4" Male Sweat | QQC75GX Adapter 1 1/2" PEX x 1 1/2" Male Sweat | QQ812GX Adapter 2" PEX x 2" Male Sweat | |
|
Low Lead Brass Coupling Barb x Barb |
|||
| QQC22GX 3/8" x 3/8" | QQC32GX 1/2" x 3/8" | QQC33GX 1/2" x 1/2" | QQC43GX 3/4" x 1/2" |
| QQC44GX 3/4" x 3/4" | QQC54GX 1" x 3/4" | QQC55GX 1" x 1" | QQC64GX Coupling 1 1/4" x 3/4" PEX |
| QQC65GX 1 1/4" x 1" | QQC66GX 1 1/4" x 1 1/4" | QQC74GX Coupling 1 1/2" x 3/4" PEX | QQC75GX Coupling 1 1/2" x 1" PEX |
|
Low Lead Brass Drop Ear Elbow Barb x FPT |
|||
| QQDE33BFGX 1/2" x 1/2" | QQDE44BFGX 3/4" x 3/4" | ||
|
Low Lead Brass Elbow Adapter Barb x Female Sweat |
|||
| QQE775GX 3/4" x 3/4" | |||
|
Low Lead Brass Elbow Adapter Barb x Male Sweat |
|||
| QQE675GX 3/4" x 3/4" | |||
|
Low Lead Brass Elbow Barb x Barb |
|||
| QQE33GX 1/2" x 1/2" | QQE43GX 3/4" x 1/2" | QQE44GX 3/4" x 3/4" | QQE55GX 1" x 1" |
| QQE66GX 1 1/4" | |||
|
Low Lead Brass Elbow Barb x MPT |
|||
| QQE33BTGX 1/2" x 1/2" | |||
|
Low Lead Brass Female Swivel Adapter Barb x FPT |
|||
| QXXE33BSGX 1/2" x 1/2" | QXXSFC23GX 3/8" x 1/2" | QXXSFC33GX 1/2" x 3/4" | QXXSFC44GX 3/4" x 3/4" |
|
Low Lead Brass Non-Swivel Adapter Barb x FPT |
|||
| QQUFC33GX 1/2" x 1/2" | QQUFC34GX 1/2" x 3/4" | QQUFC44GX 3/4" x 3/4" | QQUFC55GX 1" x 1" |
| QQUFC66GX 1 1/4" x 1 1/4" | |||
|
Low Lead Brass Tee |
|||
| QQT222GX 3/8" | QQT333GX 1/2" | QQT444GX 3/4" | QQT555GX 1" |
| QQT666GX 1 1/4" | QQT334GX 1/2" x 1/2" x 3/4" | QQT433GX 3/4" x 1/2" x 1/2" | QQT434GX 3/4" x 1/2" x 3/4" |
| QQT443GX 3/4" x 3/4" x 1/2" | QQT544GX 1" x 3/4" x 1/2" | QQT553GX 1" x 1" x 1/2" | QQT554GX 1" x 1" x 3/4" |
| QQT663GX 1 1/4" x 1 1/4" x 1/2" | QQT664GX 1 1/4" x 1 1/4" x 3/4" | ||
|
Low Lead Brass Test Plug |
|||
| QQP3GX 1/2" | QQP4GX 3/4" | QQP5GX 1" | QQP6GX 1 1/4" |
@ These fittings meet all the requirements under F1807 and F877. ’ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 202
Processing time was 1 seconds