These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=3W490&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Interline Brands Inc. | |
| 801 West Bay Street | |
| Jacksonville, FL 32204 | |
| United States | |
| 800-335-9072 | |
| 904-384-6530 |
Facility : # 3 China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ¢ £ § ++ [G] |
Brass C69300 |
PREMIER |
ASTM F1807 |
|
Adapter (Swivel) - PEX x Closet - Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x FPT Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x NPSM Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX to PB (with crimp rings) |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x Compression |
|||
| 3/8" - 1/2" | |||
|
Adapter - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x PE |
|||
| 3/8" - 1 1/4" | |||
|
Coupling - PEX x PEX |
|||
| 3/8" - 1 1/4" | |||
|
Coupling - PEX x PEX Not Drilled Through |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x FPT, Drop Ear |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x PEX |
|||
| 3/8" - 1 1/4" | |||
|
Plug - PEX |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX Reducing |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings* £ § [G] |
Brass C69300 |
PREMIER |
ASTM F877 |
|
Adapter (PEX x Compression) |
|||
| 3/8" - 1/2" | |||
|
Adapter (PEX x F Sweat) |
|||
| 1 1/2" x 1 1/2" | 2" x 2" | ||
|
Adapter (PEX x FPT) |
|||
| 1 1/2" x 1 1/2" | 2" x 2" | ||
|
Adapter (PEX x M Sweat) |
|||
| 1 1/2" x 1 1/2" | 2" x 2" | ||
|
Adapter (PEX x MPT) |
|||
| 1 1/2" | 2" | ||
|
Coupling (PEX x PEX) |
|||
| 1 1/2" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" |
| 2" x 1 1/2" | |||
|
Elbow (PEX x PEX) |
|||
| 1 1/2" | 2" | ||
|
Tee (PEX) |
|||
| 1 1/2" | 2" | ||
|
Tee, Reducing (PEX) |
|||
| 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | 2" x 2" x 1" | 2" x 2" x 1 1/4" |
| 2" x 2" x 1 1/2" | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings@ ¢ £ § ++ [G] |
Brass C69300 |
PREMIER |
CSA B137.5 |
|
Adapter (Swivel) - PEX x Closet - Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x FPT Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter (Swivel) - PEX x NPSM Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX to PB (with crimp rings) |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x Compression |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
Adapter - PEX x PE |
|||
| 3/8" - 1 1/4" | |||
|
Coupling - PEX x PEX |
|||
| 3/8" - 1 1/4" | |||
|
Coupling - PEX x PEX Not Drilled Through |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Brass Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow (Swivel) PEX x NPSM-Plastic Nut |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x F Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x FPT, Drop Ear |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x M Sweat |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
|
Elbow - PEX x PEX |
|||
| 3/8" - 1 1/4" | |||
|
Plug - PEX |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX Reducing |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x FPT |
|||
| 3/8" - 1 1/4" | |||
|
Tee - PEX x MPT |
|||
| 3/8" - 1 1/4" | |||
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings¢ £ § ++ [1] [G] |
Brass C69300 |
Premier Fittings |
ASTM F877 |
|
Adapter, UniGrip x FPT |
|||
| E9103-XXXX | |||
|
Adapter, UniGrip x MPT |
|||
| E9102-XXXX | |||
|
Coupling |
|||
| E9101-XXXX | |||
|
Drop Ear Elbow, UniGrip x FPT |
|||
| E9095-0505 | E9095-04505 | ||
|
Elbow |
|||
| E9201-XXXX | |||
|
Elbow, UniGrip x FNPT |
|||
| E9203-0505 | |||
|
Elbow, UniGrip x MNPT |
|||
| E9202-0505 | |||
|
Tee |
|||
| E9401-XXXXXX | |||
|
Tee, reducing |
|||
| E9401-XXXXXX | |||
|
Test Cap |
|||
| E9109-XX | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Each set of 'XX' may be 01 (3/8"), 05 (1/2"), 07 (3/4") or 08 (1"). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings¢ £ § ++ [2] [G] |
Brass C69300 |
Premier Fittings |
CSA B137.5 |
|
Adapter, UniGrip x FPT |
|||
| E9103-XXXX | |||
|
Adapter, UniGrip x MPT |
|||
| E9102-XXXX | |||
|
Coupling |
|||
| E9101-XXXX | |||
|
Drop Ear Elbow, UniGrip x FPT |
|||
| E9095-0505 | E9095-04505 | ||
|
Elbow |
|||
| E9201-XXXX | |||
|
Elbow, UniGrip x FNPT |
|||
| E9203-0505 | |||
|
Elbow, UniGrip x MNPT |
|||
| E9202-0505 | |||
|
Tee |
|||
| E9401-XXXXXX | |||
|
Tee, reducing |
|||
| E9401-XXXXXX | |||
|
Test Cap |
|||
| E9109-XX | |||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [2] 3/8" sizes for use with Cu and PEX only. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ ¢ £ § [G] |
Brass C69300 |
Premier Transition Adapters |
ASTM F877 |
| 1/2" (E405-A) | |||
| 3/4" (E7075-A) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ ¢ £ § [G] |
Brass C69300 |
Premier Transition Adapters |
CSA B137.5 |
| 1/2" (E405-A) | |||
| 3/4" (E7075-A) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. £ Product is Certified to NSF/ANSI 14-2009 including Section 5.8 for Dezincification and Stress Corrosion Cracking resistance. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Shanghai, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings¢ § ++ [G] |
MLTPL |
Premier |
ASTM F877 |
|
PUSHFIT Adapter[1] |
|||
| C9102-XXXX | C9103-XXXX | ||
|
PUSHFIT Coupling[1] |
|||
| C9101-XXXX | |||
|
PUSHFIT Elbow[1] |
|||
| C9201-XXXX | C9202-XXXX | C9203-XXXX | |
|
PUSHFIT Tee[1] |
|||
| C9401-XXXXXX | |||
|
PUSHFIT Tee, Reducing[1] |
|||
| C9401-XXXXXX | |||
|
PUSHFIT Test Cap[1] |
|||
| C9109-XX | |||
[1] Each set of XX may be 05 (1/2"), 07 (3/4"), or 08 (1"). ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings¢ § ++ [G] |
MLTPL |
Premier |
CSA B137.5 |
|
PUSHFIT Adapter[1] |
|||
| C9102-XXXX | C9103-XXXX | ||
|
PUSHFIT Coupling[1] |
|||
| C9101-XXXX | |||
|
PUSHFIT Elbow[1] |
|||
| C9201-XXXX | C9202-XXXX | C9203-XXXX | |
|
PUSHFIT Tee[1] |
|||
| C9401-XXXXXX | |||
|
PUSHFIT Tee, Reducing[1] |
|||
| C9401-XXXXXX | |||
|
PUSHFIT Test Cap[1] |
|||
| C9109-XX | |||
[1] Each set of XX may be 05 (1/2"), 07 (3/4"), or 08 (1"). ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 115
Processing time was 1 seconds