These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=3X510&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Poly Innovations Inc. | |
| 238 Britannia Road East | |
| Mississauga, ON L4Z 2S6 | |
| Canada | |
| 800-361-3773 | |
| 905-625-9440 | |
| Visit this company's website |
Facility : Georgetown, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § ++ [G] |
PPSU |
ACCU CRIMP |
ASTM F2159 |
|
Polyalloy PEX Fittings |
|||
| 1/2" CPL (2653144) | 1/2" ELB (2652144) | 1/2" MPT CPL (2653172) | 1/2" MPT Plug (2652248) |
| 1/2" TEE (2651104) | 1/2" PEX x 1/2" PEX MPT (2654044) | 1/2" PEX x 1/2" MPT ELB (2652242) | 1/2" PEX x 3/4" MPT ADPT (2653632) |
| 1/2" x 1/2" x 1/2" MPT TEE (265112) | 1/2" x 1/2" x 3/4" TEE (2659446) | 3/4" CPL (2653166) | 3/4" ELB (2652166) |
| 3/4" MPT Plug (2652250) | 3/4" TEE (2651106) | 3/4" PEX x 1/2" MPT ADPT (2653623) | 3/4" PEX x 1/2" MPT ELB (2652244) |
| 3/4" x 1/2" CPL (2653464) | 3/4" x 1/2" ELB (2652064) | 3/4" PEX x 3/4" MPT (2654066) | 3/4" PEX x 3/4" MPT ELB (2652246) |
| 3/4" x 3/4" x 1" TEE (2659736) | 3/4" x 1/2" x 1/2" TEE (2659644) | 3/4" x 1/2" x 3/4" TEE (2659646) | 3/4" x 3/4" x 1/2" TEE (2659664) |
| 1" ELB (2652168) | 1" TEE (2659612) | 1" x 1/2" CPL (2653472) | 1" x 3/4" CPL (2653476) |
| 1" PEX x 1" MPT (2654077) | 1" x 3/4" x 3/4" TEE (2659766) | 1" x 3/4" x 1" TEE (2659767) | 1" x 1" x 1/2" TEE (2659774) |
| 1" x 1" x 3/4" TEE (2659776) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
PPSU |
ACCU CRIMP |
ASTM F2159 |
|
Swivel Adaptors |
|||
| 1/2" PEX x 1/2" FPT Swivel Straight Adaptor (2652722) | 1/2" PEX x 1/2" FPT Swivel Elbow (2652726) | 3/4" PEX x 3/4" FPT Swivel Straight Adaptor (2652730) | 3/4" PEX x 3/4" FPT Swivel Elbow (2652732) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ++ [G] |
PPSU |
ACCU CRIMP |
ASTM F877 |
|
Polyalloy PEX Fittings |
|||
| 1/2" CPL (2653144) | 1/2" ELB (2652144) | 1/2" MTP CPL (2653172) | 1/2" MTP Plug (2652248) |
| 1/2" TEE (2651104) | 1/2" PEX x 1/2" PEX MPT (2654044) | 1/2" PEX x 1/2" MPT ELB (2652242) | 1/2" x 1/2" x 1/2" MPT TEE (265112) |
| 1/2" PEX x 3/4" MPT ADPT (2653632) | 1/2" x 1/2" x 3/4" TEE (2659446) | 3/4" CPL (2653166) | 3/4" ELB (2652166) |
| 3/4" MPT Plug (2652250) | 3/4" TEE (2651106) | 3/4" PEX x 1/2" MPT ADPT (2653623) | 3/4" PEX x 1/2" MPT ELB (2652244) |
| 3/4" x 1/2" CPL (2653464) | 3/4" x 1/2" ELB (2652064) | 3/4" PEX x 3/4" MPT (2654066) | 3/4" PEX x 3/4" MPT ELB (2652246) |
| 3/4" x 3/4" x 1" TEE (2659736) | 3/4" x 1/2" x 1/2" TEE (2659644) | 3/4" x 1/2" x 3/4" TEE (2659646) | 3/4" x 3/4" x 1/2" TEE (2659664) |
| 1" ELB (2652168) | 1" TEE (2659612) | 1" x 1/2" CPL (2653472) | 1" x 3/4" CPL (2653476) |
| 1" PEX x 1" MPT (2654077) | 1" x 3/4" x 3/4" TEE (2659766) | 1" x 3/4" x 1" TEE (2659767) | 1" x 1" x 1/2" TEE (2659774) |
| 1" x 1" x 3/4" TEE (2659776) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
PPSU |
ACCU CRIMP |
ASTM F877 |
|
Swivel Adaptors |
|||
| 1/2" PEX x 1/2" FPT Swivel Straight Adaptor (2652722) | 1/2" PEX x 1/2" FPT Swivel Elbow (2652726) | 3/4" PEX x 3/4" FPT Swivel Straight Adaptor (2652730) | 3/4" PEX x 3/4" FPT Swivel Elbow (2652732) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ++ [G] |
PPSU |
ACCU CRIMP |
CSA B137.5 |
|
Polyalloy PEX Fittings |
|||
| 1/2" CPL (2653144) | 1/2" ELB (2652144) | 1/2" MPT CPL (2653172) | 1/2" MPT Plug (2652248) |
| 1/2" TEE (2651104) | 1/2" PEX x 1/2" PEX MPT (2654044) | 1/2" PEX x 1/2" MPT ELB (2652242) | 1/2" x 1/2" x 1/2" MPT TEE (265112) |
| 1/2" x 1/2" x 3/4" TEE (2659446) | 1/2" PEX x 3/4" MPT ADPT (2653632) | 3/4" CPL (2653166) | 3/4" ELB (2652166) |
| 3/4" MPT Plug (2652250) | 3/4" TEE (2651106) | 3/4" PEX x 1/2" MPT ADPT (2653623) | 3/4" PEX x 1/2" MPT ELB (2652244) |
| 3/4" PEX x 3/4" MPT (2654066) | 3/4" PEX x 3/4" MPT ELB (2652246) | 3/4" x 3/4" x 1" TEE (2659736) | 3/4" x 1/2" CPL (2653464) |
| 3/4" x 1/2" ELB (2652064) | 3/4" x 1/2" x 1/2" TEE (2659644) | 3/4" x 1/2" x 3/4" TEE (2659646) | 3/4" x 3/4" x 1/2" TEE (2659664) |
| 1" ELB (2652168) | 1" TEE (2659612) | 1" x 1/2" CPL (2653472) | 1" x 3/4" CPL (2653476) |
| 1" PEX x 1" MPT (2654077) | 1" x 3/4" x 3/4" TEE (2659766) | 1" x 3/4" x 1" TEE (2659767) | 1" x 1" x 1/2" TEE (2659774) |
| 1" x 1" x 3/4" TEE (2659776) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
PPSU |
ACCU CRIMP |
CSA B137.5 |
|
Swivel Adaptors |
|||
| 1/2" PEX x 1/2" FPT Swivel Straight Adaptor (2652722) | 1/2" PEX x 1/2" FPT Swivel Elbow (2652726) | 3/4" PEX x 3/4" FPT Swivel Straight Adaptor (2652730) | 3/4" PEX x 3/4" FPT Swivel Elbow (2652732) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
PPSU |
ACCU CRIMP Polyalloy PEX Manifold |
ASTM F2159 |
|
Adaptors |
|||
| 1/2" PEX x 1" MPT (2654048) | 3/4" PEX x 1" MPT (2654054) | ||
|
End Cap |
|||
| 1" MPT (2656055) | |||
|
One Sided EP Straight Manifolds |
|||
| 4 Branches 1" FPT both ends x 1/2" PEX (2871499) | 6 Branches 1" FPT both ends x 1/2" PEX (2871699) | 8 Branches 1" FPT both ends x 1/2" PEX (2871899) | |
|
Test Plugs |
|||
| 1/2" Test Plug (2656004) | 3/4" Test Plug (2656006) | 1" Test Plug (2656008) | |
|
Two Sided Manifolds-One End |
|||
| 3 Branches 1" FPT x 1/2" PEX (2872399) | 4 Branches 1" FPT x 1/2" PEX (2872499) | 6 Branches 1" FPT x 1/2" PEX (2872699) | 8 Branches 1" FPT x 1/2" PEX (2872899) |
|
Two Sided Manifolds |
|||
| 4 Branches 1" FPT both ends x 1/2" PEX (2872599) | 6 Branches 1" FPT both ends x 1/2" PEX (2872799) | 8 Branches 1" FPT both ends x 1/2" PEX (2872999) | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
PPSU |
ACCU CRIMP Polyalloy PEX Manifold |
ASTM F877 |
|
Adaptors |
|||
| 1/2" PEX x 1" MPT (2654048) | 3/4" PEX x 1" MPT (2654054) | ||
|
End Cap |
|||
| 1" MPT (2656055) | |||
|
One Sided EP Straight Manifolds |
|||
| 4 Branches 1" FPT both ends x 1/2" PEX (2871499) | 6 Branches 1" FPT both ends x 1/2" PEX (2871699) | 8 Branches 1" FPT both ends x 1/2" PEX (2871899) | |
|
Test Plugs |
|||
| 1/2" Test Plug (2656004) | 3/4" Test Plug (2656006) | 1" Test Plug (2656008) | |
|
Two Sided Manifolds-One End |
|||
| 3 Branches 1" FPT x 1/2" PEX (2872399) | 4 Branches 1" FPT x 1/2" PEX (2872499) | 6 Branches 1" FPT x 1/2" PEX (2872699) | 8 Branches 1" FPT x 1/2" PEX (2872899) |
|
Two Sided Manifolds |
|||
| 4 Branches 1" FPT both ends x 1/2" PEX (2872599) | 6 Branches 1" FPT both ends x 1/2" PEX (2872799) | 8 Branches 1" FPT both ends x 1/2" PEX (2872999) | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
PPSU |
ACCU CRIMP Polyalloy PEX Manifold |
CSA B137.5 |
|
Adaptors |
|||
| 1/2" PEX x 1" MPT (2654048) | 3/4" PEX x 1" MPT (2654054) | ||
|
End Cap |
|||
| 1" MPT (2656055) | |||
|
One Sided EP Straight Manifolds |
|||
| 4 Branches 1" FPT both ends x 1/2" PEX (2871499) | 6 Branches 1" FPT both ends x 1/2" PEX (2871699) | 8 Branches 1" FPT both ends x 1/2" PEX (2871899) | |
|
Test Plugs |
|||
| 1/2" Test Plug (2656004) | 3/4" Test Plug (2656006) | 1" Test Plug (2656008) | |
|
Two Sided Manifolds-One End |
|||
| 3 Branches 1" FPT x 1/2" PEX (2872399) | 4 Branches 1" FPT x 1/2" PEX (2872499) | 6 Branches 1" FPT x 1/2" PEX (2872699) | 8 Branches 1" FPT x 1/2" PEX (2872899) |
|
Two Sided Manifolds |
|||
| 4 Branches 1" FPT both ends x 1/2" PEX (2872599) | 6 Branches 1" FPT both ends x 1/2" PEX (2872799) | 8 Branches 1" FPT both ends x 1/2" PEX (2872999) | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ++ [G] |
PPSU |
Polyalloy PEX Fittings |
ASTM F2159 |
| 1.0" Pex x 1.0" MPT Adaptor | 1/2" Pex x 1.0" MPT Adaptor | 1/2" Pex x 1/2" MPT Adaptor | 1/2" Pex x 3/4" MPT Adaptor |
| 3/4" Pex x 1.0" MPT Adaptor | 3/4" Pex x 1/2" MPT Adaptor | 3/4" Pex x 3/4" MPT Adaptor | 1.0" x 1.0" Coupling |
| 1.0" x 1/2" Coupling | 1.0" x 3/4" Coupling | 1/2" x 1/2" Coupling | 3/4" x 1/2" Coupling |
| 3/4" x 3/4" Coupling | 1.0" x 1.0" Elbow | 1/2" x 1/2" Elbow | 3/4" x 1/2" Elbow |
| 3/4" x 3/4" Elbow | 1/2" Pex x 1/2" MPT Elbow Adaptor | 3/4" Pex x 1/2" MPT Elbow Adaptor | 3/4" Pex x 3/4" MPT Elbow Adaptor |
| 1.0" x 1.0" x 1.0" Tee | 1.0" x 1.0" x 1/2" Tee | 1.0" x 3/4" x 1.0" Tee | 1.0" x 3/4" x 3/4" Tee |
| 1/2" x 1/2" x 1/2" Tee | 1/2" x 1/2" x 3/4" Tee | 3/4" x 1/2" x 1/2" Tee | 3/4" x 1/2" x 3/4" Tee |
| 3/4" x 3/4" x 1/2" Tee | 3/4" x 3/4" x 3/4" Tee | 3/4" x 3/4" x 1" Tee | 1.0" x 1.0" x 3/4" Tee |
| 1.0" Test Plug | 1/2" Test Plug | 3/4" Test Plug | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ++ [G] |
PPSU |
Polyalloy PEX Fittings |
ASTM F877 |
| 1.0" Pex x 1.0" MPT Adaptor | 1/2" Pex x 1.0" MPT Adaptor | 1/2" Pex x 1/2" MPT Adaptor | 1/2" Pex x 3/4" MPT Adaptor |
| 3/4" Pex x 1.0" MPT Adaptor | 3/4" Pex x 1/2" MPT Adaptor | 3/4" Pex x 3/4" MPT Adaptor | 1.0" x 1.0" Coupling |
| 1.0" x 1/2" Coupling | 1.0" x 3/4" Coupling | 1/2" x 1/2" Coupling | 3/4" x 1/2" Coupling |
| 3/4" x 3/4" Coupling | 1.0" x 1.0" Elbow | 1/2" x 1/2" Elbow | 3/4" x 1/2" Elbow |
| 3/4" x 3/4" Elbow | 1/2" Pex x 1/2" MPT Elbow Adaptor | 3/4" Pex x 1/2" MPT Elbow Adaptor | 3/4" Pex x 3/4" MPT Elbow Adaptor |
| 1.0" x 1.0" x 1.0" Tee | 1.0" x 1.0" x 1/2" Tee | 1.0" x 3/4" x 1.0" Tee | 1.0" x 3/4" x 3/4" Tee |
| 1/2" x 1/2" x 1/2" Tee | 1/2" x 1/2" x 3/4" Tee | 3/4" x 1/2" x 1/2" Tee | 3/4" x 1/2" x 3/4" Tee |
| 1.0" x 1.0" x 3/4" Tee | 1.0" Test Plug | 1/2" Test Plug | 3/4" Test Plug |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ++ [G] |
PPSU |
Polyalloy PEX Fittings |
CSA B137.5 |
| 1.0" Pex x 1.0" MPT Adaptor | 1/2" Pex x 1.0" MPT Adaptor | 1/2" Pex x 1/2" MPT Adaptor | 1/2" Pex x 3/4" MPT Adaptor |
| 3/4" Pex x 1.0" MPT Adaptor | 3/4" Pex x 1/2" MPT Adaptor | 3/4" x 3/4" x 1/2" Tee | 3/4" Pex x 3/4" MPT Adaptor |
| 3/4" x 3/4" x 3/4" Tee | 3/4" x 3/4" x 1" Tee | 1.0" x 1.0" Coupling | 1.0" x 1/2" Coupling |
| 1.0" x 3/4" Coupling | 1/2" x 1/2" Coupling | 3/4" x 1/2" Coupling | 3/4" x 3/4" Coupling |
| 1.0" x 1.0" Elbow | 1/2" x 1/2" Elbow | 3/4" x 1/2" Elbow | 3/4" x 3/4" Elbow |
| 1/2" Pex x 1/2" MPT Elbow Adaptor | 3/4" Pex x 1/2" MPT Elbow Adaptor | 3/4" Pex x 3/4" MPT Elbow Adaptor | 1.0" x 1.0" x 1.0" Tee |
| 1.0" x 1.0" x 1/2" Tee | 1.0" x 3/4" x 1.0" Tee | 1.0" x 3/4" x 3/4" Tee | 1/2" x 1/2" x 1/2" Tee |
| 1/2" x 1/2" x 3/4" Tee | 3/4" x 1/2" x 1/2" Tee | 3/4" x 1/2" x 3/4" Tee | 1.0" x 1.0" x 3/4" Tee |
| 1.0" Test Plug | 1/2" Test Plug | 3/4" Test Plug | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 261
Processing time was 0 seconds