These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=42200&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Silver-Line Plastics Corporation 
900 Riverside Drive
Asheville, NC 28804 
United States 
828-252-8755
Visit this company's website

Facility : Ft. Pierce, FL

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe* + [G]
PVC 1120
Silver-Line
ASTM D2241
1/2" SDR 13.5
5" SDR 17
3/4" - 12" SDR 21
1" - 12" SDR 26
4" - 18" SDR 41 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe* + [G]
PVC 1120
Silver-Line
ASTM D1785
1/2" - 16" Sch 40
1/2" - 12" Sch 80
1/2" - 12" Sch 120 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Silver-Line
ASTM F480
2" - 12" SDR 21
4" - 12" SDR 26
2" - 12" Sch 40 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Well Casing (SE)[G]
PVC 1120 IC-0
Silver-Line
ASTM F480
4 1/2" SDR 32.5 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Well Casing[G]
PVC 1120 IC-2
Silver-Line
ASTM F480
4" Sch 40
4 1/2" SDR 17
4 1/2" SDR 21
4 1/2" SDR 26
4 1/2" Sch 40
5" SDR 17
5" SDR 21
5" SDR 26
5" Sch 40
6" SDR 17
6" SDR 21
6" SDR 26
6" Sch 40
6 1/4" SDR 17
6 1/4" SDR 21
6 1/4" SDR 27.6
8" Sch 40 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Asheville, NC

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [1] [G]
PVC 1120
Silver-Line
ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
1/2" - 12" Sch 120 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF for this production
    facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [1] [G]
PVC 1120
Silver-Line
ASTM D2241
1/2" SDR 13.5
3/4" - 12" SDR 21
1 1/4" - 12" SDR 26
5" SDR 17 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF for this production
    facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+++ [G]
CPVC 4120
Silver-Line
ASTM D2846
1/4" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE3608*
Sil-O-Flex
ASTM D2737
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE3608*
Sil-O-Flex
ASTM D2239
1/2" - 2" SIDR 15
1/2" - 2" SIDR 9
1/2" - 2" SIDR 7
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 19 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408, PE4710
Sil-O-Flex
ASTM D3035
1/2" - 2" DR 9
1/2" - 4" SDR 11 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tubing@ ^ ++ [G]
PEX 5306
Sil-O-PEX
ASTM F876/F877
1/4" - 2" (CTS) SDR 9 

@ Black inner layer with blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+++ [G]
CPVC 4120
Ultra-PureŽ CPVC
ASTM D2846
1/4" - 2" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE4710*
Ultra-Pure
ASTM D2239
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE4710*
Ultra-Pure
ASTM D3035
1/2" - 4" SDR 11
1/2" - 2" DR 9 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE4710*
Ultra-Pure
ASTM D2737
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-O
Silver-Line
ASTM F480
2" - 12" SDR 21
4" - 12" SDR 26
2" - 12" Sch 40 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Well Casing (SE)[G]
PVC 1120 IC-O
Silver-Line
ASTM F480
4 1/2" SDR 32.5 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Well Casing[G]
PVC 1120 IC-2
Silver-Line
ASTM F480
6 1/4" SDR 27.6
6 1/4" SDR 21
4 1/2" SDR 17
5" SDR 17
6" SDR 17
6 1/4" SDR 17
4" Sch 40
4 1/2" Sch 40
4 1/2" SDR 21
4 1/2" SDR 26
5" Sch 40
5" SDR 21
5" SDR 26
6" Sch 40
6" SDR 21
6" SDR 26
8" Sch 40 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Lawton, OK

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [1] [G]
PVC 1120
Silver-Line
ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF for this production
    facility
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [1] [G]
PVC 1120
Silver-Line
ASTM D2241
1 1/4" - 12" SDR 26
3/4" - 12" SDR 21
1/2" SDR 13.5
5" SDR 17 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF for this production
    facility
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE3608*
Silver-Line Sil-O-Flex
ASTM D2239
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE3608*
Silver-Line Sil-O-Flex CTS
ASTM D2737
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3608, PE4710
Silver-Line Sil-O-Flex
ASTM D3035
1/2" - 2" SDR 9
1/2" - 4" SDR 11 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE4710*
Ultra-Pure II
ASTM D3035
1/2" - 2" DR 9
1/2" - 4" SDR 11 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE4710*
Ultra-Pure II
ASTM D2239
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE3408/PE4710*
Ultra-Pure II
ASTM D2737
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
Silver-Line
ASTM F480
2" - 12" SDR 21
4" - 12" SDR 26
2" - 12" Sch 40 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Well Casing (SE)[G]
PVC 1120 IC-0
Silver-Line
ASTM F480
4 1/2" SDR 32.5 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Well Casing[G]
PVC 1120 IC-2
Silver-Line
ASTM F480
6 1/4" SDR 27.6
6 1/4" SDR 21
4 1/2" SDR 17
5" SDR 17
6" SDR 17
6 1/4" SDR 17
4" Sch 40
4 1/2" Sch 40
4 1/2" SDR 21
4 1/2" SDR 26
5" Sch 40
5" SDR 21
5" SDR 26
6" Sch 40
6" SDR 21
6" SDR 26
8" Sch 40 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 123
Processing time was 1 seconds