These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=49950&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Watts Regulator Company | |
| 815 Chestnut Street | |
| North Andover, MA 01845 | |
| United States | |
| 978-689-6165 | |
| Visit this company's website |
Facility : # 1 Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ¢ § +++ [G] |
Brass C69300 |
WPEX |
ASTM F1807 |
|
Adapter |
|||
| 3/8" x 1/2" (LFWP12B-0608) | 1/2" x 1/2" (LFWP12B-0808) | 1/2" x 3/4" (LFWP12B-0812) | 3/4" x 1/2" (LFWP12B-1208) |
| 3/4" x 3/4" (LFWP12B-1212) | 3/4" x 1" (LFWP12B-1216) | 1" x 3/4" (LFWP12B-1612) | 1" x 1" (LFWP12B-1616) |
|
Adapter (Crimp x FPT) |
|||
| 1/2" x 1/2" (LFWP13B-0808) | 1/2" x 3/4" (LFWP13B-0812) | 3/4" x 1/2" (LFWP13B-1208) | 3/4" x 3/4" (LFWP13B-1212) |
| 3/4" x 1" (LFWP13B-1216) | 1" x 3/4" (LFWP13B-1612) | 1" x 1" (LFWP13B-1616) | 1 1/4" x 1 1/4" (LFWP13B-2020) |
|
Adapter (Crimp x NPT) |
|||
| 1 1/4" x 1" (LFWP12B-2016) | 1 1/4" x 1 1/4" (LFWP12B-2020) | ||
|
Adapter (FS) |
|||
| 1/2" x 1/2" (LFWP11B-0808) | 3/4" x 3/4" (LFWP11B-1212) | 1" x 1" (LFWP11B-1616) | |
|
Adapter (Female Sweat x Crimp) |
|||
| 1/2" x 3/4" (LFWP11B-0812) | 1" x 1 1/4" (LFWP11B-1620) | 1 1/4" x 1 1/4" (LFWP11B-2020) | |
|
Adapter (MS) |
|||
| 1/2" x 3/8" (LFWP10B-0806) | 1/2" x 1/2" (LFWP10B-0808) | 3/4" x 3/4" (LFWP10B-1212) | 1" x 1" (LFWP10B-1616) |
| 1 1/4" x 1 1/4" (LFWP10B-2020PB) | 1 1/4" x 1 1/4" (LFWP10B-2020) | ||
|
Adapter (Male Sweat x Crimp) |
|||
| 1" x 1 1/4" (LFWP10B-1620) | |||
|
Coupling |
|||
| 3/8" x 3/8" (LFWP15B-0606) | 1/2" (LFWP28B-08) | 1/2" (LFWP28B-08PB) | 1/2" x 3/8" (LFWP15B-0806) |
| 1/2" x 1/2" (LFWP15B-0808) | 3/4" (LFWP28B-12) | 3/4" (LFWP28B-12PB) | 3/4" x 1/2" (LFWP15B-1208) |
| 3/4" x 3/4" (LFWP15B-1212) | 1" (LFWP28B-16) | 1" (LFWP28B-16PB) | 1" x 3/4" (LFWP15B-1612) |
| 1" x 1" (LFWP15B-1616) | |||
|
Coupling (Crimp x Crimp) |
|||
| 3/4" x 1" (LFWP15B-1208) | 1" x 1 1/4" (LFWP15B-1620) | 1 1/4" x 1 1/4" (LFWP15B-2020) | |
|
Crimp Ring Coupling Kit (PEX X PEX) |
|||
| 3/8" (LFWP16B-06) | 3/8" PEX x 3/8" PB (LFWP17B-06PB) | 1/2" (LFWP16B-08) | 1/2" PEX x 1/2" PB (LFWP17B-08PB) |
| 3/4" (LFWP16B-12) | 3/4" PEX x 3/4" PB (LFWP17B-12PB) | 1" (LFWP16B-16) | 1" PEX x 1" B (LFWP17B-16PB) |
| 1 1/4" (LFWP16B-20) | |||
|
Drip Tee (Crimp) |
|||
| 1/2" (LFWPDT-08) | 3/4" (LFWPDT-12) | 1" (LFWPDT-16) | |
|
Drop Ear Elbow (PEX x NPT) |
|||
| 3/8" x 1/2" (LFWP22B-0608) | 1/2" x 1/2" (LFWP22B-08) | 1/2" x 1/2" (LFWP23B-08) | 3/4" x 1/2" (LFWP22B-1208) |
| 3/4" x 3/4" (LFWP22B-12) | |||
|
Elbow (Crimp x Crimp) |
|||
| 3/8" x 3/8" (LFWP19B-06) | 1/2" x 1/2" (LFWP19B-08) | 3/4" x 1/2" (LFWP19B-1208) | 3/4" x 3/4" (LFWP19B-12) |
| 3/4" x 3/4" (LFWP19B-1212) | 3/4" x 3/4" (LFWP19B-1212PB) | 3/4" x 1" (LFWP19B-1216) | 1" x 1" (LFWP19B-16) |
| 1 1/4" (LFWP19B-20PB) | 1 1/4" x 1 1/4" (LFWP19B-2020) | ||
|
Elbow (Crimp x MPT) |
|||
| 1/2" x 3/8" (LFWP20B-0806) | 1/2" x 3/4" (LFWP20B-0812) | 1/2" x 1/2" (LFWP20B-0808) | 3/4" x 3/4" (LFWP20B-12) |
|
Elbow (Crimp x Sweat) |
|||
| 1/2" x 1/2" (LFWP21B-08) | 1/2" x 3/4" (LFWP21B-0812) | 3/4" x 3/4" (LFWP21B-12 ) | 1" x 1" (LFWP21B-16) |
|
Tee (Crimp x Crimp x Crimp) |
|||
| 3/8" x 3/8" x 3/8" (LFWP18B-06) | 1/2" x 3/8" x 3/8" (LFWP18B-080606) | 1/2" x 3/8" x 1/2" (LFWP18B-080608) | 1/2" x 1/2" x 3/8" (LFWP18B-080806) |
| 1/2" x 1/2" x 1/2" (LFWP18B-08) | 1/2" x 1/2" x 3/4" (LFWP18B-080812) | 3/4" x 1/2" x 1/2" (LFWP18B-120808) | 3/4" x 3/4" x 3/8" (LFWP18B-121206) |
| 3/4" x 3/4" x 1/2" (LFWP18B-121208) | 3/4" x 1/2" x 3/4" (LFWP18B-120812) | 3/4" x 3/4" x 3/4" (LFWP18B-12) | 3/4" x 3/4" x 1" (LFWP18B-121216) |
| 1" x 3/4" x 3/4" (LFWP18B-161212) | 1" x 1" x 1/2" (LFWP18B-161608) | 1" x 1" x 3/4" (LFWP18B-161612) | 1" x 1" x 1" (LFWP18B-16) |
| 1 1/4" x 1 1/4" x 1" (LF-WP18B-202016) | 1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20) | ||
|
Test Plug |
|||
| 3/8" (LFWP24B-06) | 1/2" (LFWP24B-08) | 3/4" (LFWP24B-12) | 1" (LFWP24B-16) |
@ These fittings meet all the requirements under F1807 and F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings@ ¢ § +++ [G] |
Brass C69300 |
WPEX |
CSA B137.5 |
|
Adapter |
|||
| 3/8" x 1/2" (LFWP12B-0608) | 1/2" x 1/2" (LFWP12B-0808) | 1/2" x 3/4" (LFWP12B-0812) | 3/4" x 1/2" (LFWP12B-1208) |
| 3/4" x 3/4" (LFWP12B-1212) | 3/4" x 1" (LFWP12B-1216) | 1" x 3/4" (LFWP12B-1612) | 1" x 1" (LFWP12B-1616) |
|
Adapter (Crimp x FPT) |
|||
| 1/2" x 1/2" (LFWP13B-0808) | 1/2" x 3/4" (LFWP13B-0812) | 3/4" x 1/2" (LFWP13B-1208) | 3/4" x 3/4" (LFWP13B-1212) |
| 3/4" x 1" (LFWP13B-1216) | 1" x 3/4" (LFWP13B-1612) | 1" x 1" (LFWP13B-1616) | 1 1/4" x 1 1/4" (LFWP13B-2020) |
|
Adapter (Crimp x NPT) |
|||
| 1 1/4" x 1" (LFWP12B-2016) | 1 1/4" x 1 1/4" (LFWP12B-2020) | ||
|
Adapter (FS) |
|||
| 1/2" x 1/2" (LFWP11B-0808) | 3/4" x 3/4" (LFWP11B-1212) | 1" x 1" (LFWP11B-1616) | |
|
Adapter (Female Sweat x Crimp) |
|||
| 1/2" x 3/4" (LFWP11B-0812) | 1" x 1 1/4" (LFWP11B-1620) | 1 1/4" x 1 1/4" (LFWP11B-2020) | |
|
Adapter (MS) |
|||
| 1/2" x 3/8" (LFWP10B-0806) | 1/2" x 1/2" (LFWP10B-0808) | 3/4" x 3/4" (LFWP10B-1212) | 1" x 1" (LFWP10B-1616) |
| 1 1/4" x 1 1/4" (LFWP10B-2020PB) | 1 1/4" x 1 1/4" (LFWP10B-2020) | ||
|
Adapter (Male Sweat x Crimp) |
|||
| 1" x 1 1/4" (LFWP10B-1620) | |||
|
Coupling |
|||
| 3/8" x 3/8" (LFWP15B-0606) | 1/2" (LFWP28B-08) | 1/2" (LFWP28B-08PB) | 1/2" x 3/8" (LFWP15B-0806) |
| 1/2" x 1/2" (LFWP15B-0808) | 3/4" (LFWP28B-12) | 3/4" (LFWP28B-12PB) | 3/4" x 1/2" (LFWP15B-1208) |
| 3/4" x 3/4" (LFWP15B-1212) | 1" (LFWP28B-16) | 1" (LFWP28B-16PB) | 1" x 3/4" (LFWP15B-1612) |
| 1" x 1" (LFWP15B-1616) | |||
|
Coupling (Crimp x Crimp) |
|||
| 3/4" x 1" (LFWP15B-1208) | 1" x 1 1/4" (LFWP15B-1620) | 1 1/4" x 1 1/4" (LFWP15B-2020) | |
|
Crimp Ring Coupling Kit (PEX X PEX) |
|||
| 3/8" (LFWP16B-06) | 3/8" PEX x 3/8" PB (LFWP17B-06PB) | 1/2" (LFWP16B-08) | 1/2" PEX x 1/2" PB (LFWP17B-08PB) |
| 3/4" (LFWP16B-12) | 3/4" PEX x 3/4" PB (LFWP17B-12PB) | 1" (LFWP16B-16) | 1" PEX x 1" PB (LFWP17B-16PB) |
| 1 1/4" (LFWP16B-20) | |||
|
Drip Tee (Crimp) |
|||
| 1/2" (LFWPDT-08) | 3/4" (LFWPDT-12) | 1" (LFWPDT-16) | |
|
Drop Ear Elbow (PEX x NPT) |
|||
| 3/8" x 1/2" (LFWP22B-0608) | 1/2" x 1/2" (LFWP22B-08) | 1/2" x 1/2" (LFWP23B-08) | 3/4" x 1/2" (LFWP22B-1208) |
| 3/4" x 3/4" (LFWP22B-12) | |||
|
Elbow (Crimp x Crimp) |
|||
| 3/8" x 3/8" (LFWP19B-06) | 1/2" x 1/2" (LFWP19B-08) | 3/4" x 1/2" (LFWP19B-1208) | 3/4" x 3/4" (LFWP19B-12) |
| 3/4" x 3/4" (LFWP19B-1212) | 3/4" x 3/4" (LFWP19B-1212PB) | 3/4" x 1" (LFWP19B-1216) | 1" x 1" (LFWP19B-16) |
| 1 1/4" (LFWP19B-20PB) | 1 1/4" x 1 1/4" (LFWP19B-2020) | ||
|
Elbow (Crimp x MPT) |
|||
| 1/2" x 3/8" (LFWP20B-0806) | 1/2" x 1/2" (LFWP20B-0808) | 1/2" x 3/4" (LFWP20B-0812) | 3/4" x 3/4" (LFWP20B-12) |
|
Elbow (Crimp x Sweat) |
|||
| 1/2" x 1/2" (LFWP21B-08) | 1/2" x 3/4" (LFWP21B-0812) | 3/4" x 3/4" (LFWP21B-12) | 1" x 1" (LFWP21B-16) |
|
Tee (Crimp x Crimp x Crimp) |
|||
| 3/8" x 3/8" x 3/8" (LFWP18B-06) | 1/2" x 3/8" x 3/8" (LFWP18B-080606) | 1/2" x 3/8" x 1/2" (LFWP18B-080608) | 1/2" x 1/2" x 3/8" (LFWP18B-080806) |
| 1/2" x 1/2" x 1/2" (LFWP18B-08) | 1/2" x 1/2" x 3/4" (LFWP18B-080812) | 3/4" x 1/2" x 1/2" (LFWP18B-120808) | 3/4" x 3/4" x 3/8" (LFWP18B-121206) |
| 3/4" x 3/4" x 1/2" (LFWP18B-121208) | 3/4" x 1/2" x 3/4" (LFWP18B-120812) | 3/4" x 3/4" x 3/4" (LFWP18B-12) | 3/4" x 3/4" x 1" (LFWP18B-121216) |
| 1" x 3/4" x 3/4" (LFWP18B-161212) | 1" x 1" x 1/2" (LFWP18B-161608) | 1" x 1" x 3/4" (LFWP18B-161612) | 1" x 1" x 1" (LFWP18B-16) |
| 1 1/4" x 1 1/4" x 1" (LF-WP18B-202016) | 1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20) | ||
|
Test Plug |
|||
| 3/8" (LFWP24B-06) | 1/2" (LFWP24B-08) | 3/4" (LFWP24B-12) | 1" (LFWP24B-16) |
@ These fittings meet all the requirements under F1807 and F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : # 4 Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ ¢ [G] |
Brass |
Watts |
ASTM F877 |
|
Supply Stops |
|||
| 1/2" CTS x 3/8" COMP (LFQC389403) | 1/2" CTS x 3/8" COMP (LFQC894A) | 1/2" CTS x 3/8" COMP (LFQC894S) | 1/2" CTS x 3/8" COMP (LFQC89A) |
| 1/2" CTS x 3/8" COMP (LFQC89S) | 3/8" CTS x 3/8" COMP (LFQC889A) | 3/8" CTS x 3/8" COMP (LFQC889S) | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ¢ [G] |
Brass |
Watts |
CSA B137.5 |
|
Double Reducing Union Tee |
|||
| 3/4" x 1/2" x 1/2" (LF4526RB-141010) | 1" x 3/4" x 3/4" (LF4526RB-181414) | ||
|
Drop Ear Elbow |
|||
| 1/2" (LF4521B-1008) | 3/4" (LF4521B-1412) | ||
|
End Stop |
|||
| 1/2" (LF4545B-10) | 3/4" (LF4545B-14) | 1" (LF4545B-18) | |
|
Female NPT Connector |
|||
| 1/2" (LF4510B-1008) | 3/4" (LF4510B-1412) | 1" (LF4510B-1816) | |
|
Female NPT Reducing Connector |
|||
| 3/4" x 1" (LF4510B-1416) | 1" x 3/4" (LF4510B-1812) | ||
|
Male NPT Connector |
|||
| 1/2" (LF4501B-1008) | 3/4" (LF4501B-1412) | 1" (LF4501B-1816) | |
|
Male NPT Reducing Connector |
|||
| 3/4" x 1" (LF4501B-1416) | 1" x 3/4" (LF4501B-1812) | ||
|
Reducing Union Connector |
|||
| 3/4" x 1/2" (LF4515RB-1410) | 1" x 3/4" (LF4515RB-1814) | ||
|
Reducing Union Elbow |
|||
| 3/4" x 1/2" (LF4517RB-1410) | 1" x 3/4" (LF4517RB-1814) | ||
|
Reducing Union Tee |
|||
| 3/4" x 3/4" x 1/2" (LF4524RB-141410) | 3/4" x 1/2" x 3/4" (LF4524RB-141014) | 1" x 1" x 3/4" (LF4524RB-181814) | 1" x 3/4" x 1" (LF4524RB-181418) |
|
Slip Connector |
|||
| 1/2" (LF4516B-10) | 3/4" (LF4516B-14) | 1" (LF4516B-18) | |
|
Stackable Union Elbow |
|||
| 1/2" (LF4518B-10) | 3/4" (LF4518B-14) | 1" (LF4518B-18) | |
|
Stackable Union Elbow 45° |
|||
| 1/2" (LF4522B-10) | 3/4" (LF4522B-14) | 1" (LF4522B-18) | |
|
Supply Stops |
|||
| 1/2" CTS x 3/8" COMP (LFQC389403) | 1/2" CTS x 3/8" COMP (LFQC894A) | 1/2" CTS x 3/8" COMP (LFQC894S) | 1/2" CTS x 3/8" COMP (LFQC89A) |
| 1/2" CTS x 3/8" COMP (LFQC89S) | 3/8" CTS x 3/8" COMP (LFQC889A) | 3/8" CTS x 3/8" COMP (LFQC889S) | |
|
Union Connector |
|||
| 1/2" (LF4515B-10) | 3/4" (LF4515B-14) | 1" (LF4515B-18) | |
|
Union Elbow |
|||
| 1/2" (LF4517B-10) | 3/4" (LF4517B-14) | 1" (LF4517B-18) | |
|
Union Elbow 45° |
|||
| 1/2" (LF4522B-10) | 3/4" (LF4522B-14) | 1" (LF4522B-18) | |
|
Union Tee |
|||
| 1/2" (LF4523B-10) | 3/4" (LF4523B-14) | 3/4" (LF4531B-141514) | 1" (LF4523B-18) |
| 1" (LF4531B-181518) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Kansas City, MO
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
PlumbFLOW |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe@ ^ ¢ +++ [G] |
PEX 5306 |
PlumbFLOW |
CSA B137.5 |
| 1/8" - 2" | |||
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! $ ^ ¢ § +++ [G] |
PEX 5006 |
RadiantFLOW |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
$ Product is barrier tubing. Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe$ ^ ¢ +++ [G] |
PEX 5006 |
RadiantFLOW |
CSA B137.5 |
| 1/8" - 2" | |||
$ Product is barrier tubing. Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! $ ^ ¢ § +++ [G] |
PEX 5006 |
RadiantPEX |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
$ Product is barrier tubing. Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe$ ^ ¢ +++ [G] |
PEX 5006 |
RadiantPEX |
CSA B137.5 |
| 1/8" - 2" | |||
$ Product is barrier tubing. Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! % ^ § +++ [G] |
PEX 5006 |
RadiantPEX+ (w/O2 Barrier) |
ASTM F876/F877 |
| 1/8" - 1" | |||
! Product may or may not bear the NSF U.P. code marking.
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe% ^ ¢ +++ [G] |
PEX 5006 |
RadiantPEX+ (w/O2 Barrier) |
CSA B137.5 |
| 1/8" - 1" | |||
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
RF PEX™ by WATTS |
ASTM F876/F877 |
| 1/8" – 2" | |||
! Product may or may not bear the NSF U.P. code marking.
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
RF PEX™ by Watts |
AWWA C904 |
| 1/2" – 1 1/2" | |||
! Product may or may not bear the NSF U.P. code marking.
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe@ ^ ¢ § +++ [G] |
PEX 5306 |
RF PEX™ by WATTS |
CSA B137.5 |
| 1/8" – 2" | |||
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
WaterPEX |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
WaterPEX |
AWWA C904 |
| 1/2" – 1 1/2" | |||
! Product may or may not bear the NSF U.P. code marking.
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe@ ^ ¢ +++ [G] |
PEX 5306 |
WaterPEX |
CSA B137.5 |
| 1/8" - 2" | |||
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! # ^ § +++ [G] |
PEX 5006 |
Watts Heating PEX (w/ O2 Barrier) |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
# Certified product is natural or red in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe# ^ ¢ +++ [G] |
PEX 5006 |
Watts Heating PEX (w/ O2 Barrier) |
CSA B137.5 |
| 1/8" - 2" SDR 9 | |||
# Certified product is natural or red in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe% ^ ¢ +++ [G] |
PEX 5006 |
Watts Radiant PEX (w/ O2 Barrier) |
CSA B137.5 |
| 1/8" - 2" | |||
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe! % ^ § +++ [G] |
PEX 5006 |
Watts Radiant PEX (w/ O2 Barrier) |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
& Certified product is blue or red in color.
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard |
Pipe! $ ^ ¢ § [G] |
PEX 5006 |
RadiantFLOW |
ASTM F876/F877 |
| 1/8" - 2" | |||
! Product may or may not bear the NSF U.P. code marking.
$ Product is barrier tubing. Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Pipe$ ^ ¢ [G] |
PEX 5006 |
RadiantFLOW |
CSA B137.5 |
| 1/8" - 2" | |||
$ Product is barrier tubing. Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing! % ^ § [G] |
PEX 5006 |
RadiantPEX+ (w/O2 Barrier) |
ASTM F876/F877 |
| 1/8" - 1" | |||
! Product may or may not bear the NSF U.P. code marking.
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing% ^ ¢ [G] |
PEX 5006 |
RadiantPEX+ (w/O2 Barrier) |
CSA B137.5 |
| 1/8" - 1" | |||
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Franklin, NH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fitttings¢ § +++ [G] |
MLTPL |
Watts |
ASTM F877 |
|
Pendant[1] |
|||
| LFFPSF-1L-12 | LFFPSF-1L-16 | LFFPSF-1R-12 | LFFPSF-1R-16 |
| LFFPSF-1S-12 | LFFPSF-1S-16 | LFFPSF-2-12 | LFFPSF-2-16 |
[1] LF - Lead free
1 - 1 port
2 - 2 ports
S - Straight port
R - Right port
L - Left port
12 - 3/4"
16 - 1"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ § +++ [G] |
MLTPL |
Watts |
CSA B137.5 |
|
Pendant[1] |
|||
| LFFPSF-1L-12 | LFFPSF-1L-16 | LFFPSF-1R-12 | LFFPSF-1R-16 |
| LFFPSF-1S-12 | LFFPSF-1S-16 | LFFPSF-2-12 | LFFPSF-2-16 |
[1] LF - Lead free
1 - 1 port
2 - 2 ports
S - Straight port
R - Right port
L - Left port
12 - 3/4"
16 - 1"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Chesnee, SC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings@ ¢ § +++ [G] |
Brass C69300 |
WPEX |
ASTM F1807 |
|
Adapter |
|||
| 3/8" x 1/2" (LFWP12B-0608) | 1/2" x 1/2" (LFWP12B-0808) | 1/2" x 3/4" (LFWP12B-0812) | 3/4" x 1/2" (LFWP12B-1208) |
| 3/4" x 3/4" (LFWP12B-1212) | 3/4" x 1" (LFWP12B-1216) | 1" x 3/4" (LFWP12B-1612) | 1" x 1" (LFWP12B-1616) |
|
Adapter (Crimp x FPT) |
|||
| 1/2" x 1/2" (LFWP13B-0808) | 1/2" x 3/4" (LFWP13B-0812) | 3/4" x 1/2" (LFWP13B-1208) | 3/4" x 3/4" (LFWP13B-1212) |
| 3/4" x 1" (LFWP13B-1216) | 1" x 3/4" (LFWP13B-1612) | 1" x 1" (LFWP13B-1616) | 1 1/4" x 1 1/4" (LFWP13B-2020) |
|
Adapter (Crimp x NPT) |
|||
| 1 1/4" x 1" (LFWP12B-2016) | 1 1/4" x 1 1/4" (LFWP12B-2020) | ||
|
Adapter (FS) |
|||
| 1/2" x 1/2" (LFWP11B-0808) | 3/4" x 3/4" (LFWP11B-1212) | 1" x 1" (LFWP11B-1616) | |
|
Adapter (Female Sweat x Crimp) |
|||
| 1/2" x 3/4" (LFWP11B-0812) | 1" x 1 1/4" (LFWP11B-1620) | 1 1/4" x 1 1/4" (LFWP11B-2020) | |
|
Adapter (MS) |
|||
| 1/2" x 3/8" (LFWP10B-0806) | 1/2" x 1/2" (LFWP10B-0808) | 3/4" x 3/4" (LFWP10B-1212) | 1" x 1" (LFWP10B-1616) |
| 1 1/4" x 1 1/4" (LFWP10B-2020PB) | 1 1/4" x 1 1/4" (LFWP10B-2020) | ||
|
Adapter (Male Sweat x Crimp) |
|||
| 1" x 1 1/4" (LFWP10B-1620) | |||
|
Coupling |
|||
| 3/8" x 3/8" (LFWP15B-0606) | 1/2" (LFWP28B-08) | 1/2" (LFWP28B-08PB) | 1/2" x 3/8" (LFWP15B-0806) |
| 1/2" x 1/2" (LFWP15B-0808) | 3/4" (LFWP28B-12) | 3/4" (LFWP28B-12PB) | 3/4" x 1/2" (LFWP15B-1208) |
| 3/4" x 3/4" (LFWP15B-1212) | 1" (LFWP28B-16) | 1" (LFWP28B-16PB) | 1" x 3/4" (LFWP15B-1612) |
| 1" x 1" (LFWP15B-1616) | |||
|
Coupling (Crimp x Crimp) |
|||
| 3/4" x 1" (LFWP15B-1208) | 1" x 1 1/4" (LFWP15B-1620) | 1 1/4" x 1 1/4" (LFWP15B-2020) | |
|
Crimp Ring Coupling Kit (PEX X PEX) |
|||
| 3/8" (LFWP16B-06) | 3/8" PEX x 3/8" PB (LFWP17B-06PB) | 1/2" (LFWP16B-08) | 1/2" PEX x 1/2" PB (LFWP17B-08PB) |
| 3/4" (LFWP16B-12) | 3/4" PEX x 3/4" PB (LFWP17B-12PB) | 1" (LFWP16B-16) | 1" PEX x 1" PB (LFWP17B-16PB) |
| 1 1/4" (LFWP16B-20) | |||
|
Drip Tee (Crimp) |
|||
| 1/2" (LFWPDT-08) | 3/4" (LFWPDT-12) | 1" (LFWPDT-16) | |
|
Drop Ear Elbow (PEX x NPT) |
|||
| 3/8" x 1/2" (LFWP22B-0608) | 1/2" x 1/2" (LFWP22B-08) | 1/2" x 1/2" (LFWP23B-08) | 3/4" x 1/2" (LFWP22B-1208) |
| 3/4" x 3/4" (LFWP22B-12) | |||
|
Elbow (Crimp x Crimp) |
|||
| 3/8" x 3/8" (LFWP19B-06) | 1/2" x 1/2" (LFWP19B-08) | 3/4" x 1/2" (LFWP19B-1208) | 3/4" x 3/4" (LFWP19B-12) |
| 3/4" x 3/4" (LFWP19B-1212) | 3/4" x 3/4" (LFWP19B-1212PB) | 3/4" x 1" (LFWP19B-1216) | 1" x 1" (LFWP19B-16) |
| 1 1/4" (LFWP19B-20PB) | 1 1/4" x 1 1/4" (LFWP19B-2020) | ||
|
Elbow (Crimp x MPT) |
|||
| 1/2" x 3/8" (LFWP20B-0806) | 1/2" x 1/2" (LFWP20B-0808) | 1/2" x 3/4" (LFWP20B-0812) | 3/4" x 3/4" (LFWP20B-12) |
|
Elbow (Crimp x Sweat) |
|||
| 1/2" x 1/2" (LFWP21B-08) | 1/2" x 3/4" (LFWP21B-0812) | 3/4" x 3/4" (LFWP21B-12 ) | 1" x 1" (LFWP21B-16) |
|
Tee (Crimp x Crimp x Crimp) |
|||
| 3/8" x 3/8" x 3/8" (LFWP18B-06) | 1/2" x 3/8" x 3/8" (LFWP18B-080606) | 1/2" x 3/8" x 1/2" (LFWP18B-080608) | 1/2" x 1/2" x 3/8" (LFWP18B-080806) |
| 1/2" x 1/2" x 1/2" (LFWP18B-08) | 1/2" x 1/2" x 3/4" (LFWP18B-080812) | 3/4" x 1/2" x 1/2" (LFWP18B-120808) | 3/4" x 3/4" x 3/8" (LFWP18B-121206) |
| 3/4" x 3/4" x 1/2" (LFWP18B-121208) | 3/4" x 1/2" x 3/4" (LFWP18B-120812) | 3/4" x 3/4" x 3/4" (LFWP18B-12) | 3/4" x 3/4" x 1" (LFWP18B-121216) |
| 1" x 3/4" x 3/4" (LFWP18B-161212) | 1" x 1" x 1/2" (LFWP18B-161608) | 1" x 1" x 3/4" (LFWP18B-161612) | 1" x 1" x 1" (LFWP18B-16) |
| 1 1/4" x 1 1/4" x 1" (LF-WP18B-202016) | 1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20) | ||
|
Test Plug |
|||
| 3/8" (LFWP24B-06) | 1/2" (LFWP24B-08) | 3/4" (LFWP24B-12) | 1" (LFWP24B-16) |
@ These fittings meet all the requirements under F1807 and F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings@ ¢ § +++ [G] |
Brass C69300 |
WPEX |
CSA B137.5 |
|
Adapter |
|||
| 3/8" x 1/2" (LFWP12B-0608) | 1/2" x 1/2" (LFWP12B-0808) | 1/2" x 3/4" (LFWP12B-0812) | 3/4" x 1/2" (LFWP12B-1208) |
| 3/4" x 3/4" (LFWP12B-1212) | 3/4" x 1" (LFWP12B-1216) | 1" x 3/4" (LFWP12B-1612) | 1" x 1" (LFWP12B-1616) |
|
Adapter (Crimp x FPT) |
|||
| 1/2" x 1/2" (LFWP13B-0808) | 1/2" x 3/4" (LFWP13B-0812) | 3/4" x 1/2" (LFWP13B-1208) | 3/4" x 3/4" (LFWP13B-1212) |
| 3/4" x 1" (LFWP13B-1216) | 1" x 3/4" (LFWP13B-1612) | 1" x 1" (LFWP13B-1616) | 1 1/4" x 1 1/4" (LFWP13B-2020) |
|
Adapter (Crimp x NPT) |
|||
| 1 1/4" x 1" (LFWP12B-2016) | 1 1/4" x 1 1/4" (LFWP12B-2020) | ||
|
Adapter (FS) |
|||
| 1/2" x 1/2" (LFWP11B-0808) | 3/4" x 3/4" (LFWP11B-1212) | 1" x 1" (LFWP11B-1616) | |
|
Adapter (Female Sweat x Crimp) |
|||
| 1/2" x 3/4" (LFWP11B-0812) | 1" x 1 1/4" (LFWP11B-1620) | 1 1/4" x 1 1/4" (LFWP11B-2020) | |
|
Adapter (MS) |
|||
| 1/2" x 3/8" (LFWP10B-0806) | 1/2" x 1/2" (LFWP10B-0808) | 3/4" x 3/4" (LFWP10B-1212) | 1" x 1" (LFWP10B-1616) |
| 1 1/4" x 1 1/4" (LFWP10B-2020PB) | 1 1/4" x 1 1/4" (LFWP10B-2020) | ||
|
Adapter (Male Sweat x Crimp) |
|||
| 1" x 1 1/4" (LFWP10B-1620) | |||
|
Coupling |
|||
| 3/8" x 3/8" (LFWP15B-0606) | 1/2" (LFWP28B-08) | 1/2" (LFWP28B-08PB) | 1/2" x 3/8" (LFWP15B-0806) |
| 1/2" x 1/2" (LFWP15B-0808) | 3/4" (LFWP28B-12) | 3/4" (LFWP28B-12PB) | 3/4" x 1/2" (LFWP15B-1208) |
| 3/4" x 3/4" (LFWP15B-1212) | 1" (LFWP28B-16) | 1" (LFWP28B-16PB) | 1" x 3/4" (LFWP15B-1612) |
| 1" x 1" (LFWP15B-1616) | |||
|
Coupling (Crimp x Crimp) |
|||
| 3/4" x 1" (LFWP15B-1208) | 1" x 1 1/4" (LFWP15B-1620) | 1 1/4" x 1 1/4" (LFWP15B-2020) | |
|
Crimp Ring Coupling Kit (PEX X PEX) |
|||
| 3/8" (LFWP16B-06) | 3/8" PEX x 3/8" PB (LFWP17B-06PB) | 1/2" (LFWP16B-08) | 1/2" PEX x 1/2" PB (LFWP17B-08PB) |
| 3/4" (LFWP16B-12) | 3/4" PEX x 3/4" PB (LFWP17B-12PB) | 1" (LFWP16B-16) | 1" PEX x 1" PB (LFWP17B-16PB) |
| 1 1/4" (LFWP16B-20) | |||
|
Drip Tee (Crimp) |
|||
| 1/2" (LFWPDT-08) | 3/4" (LFWPDT-12) | 1" (LFWPDT-16) | |
|
Drop Ear Elbow (PEX x NPT) |
|||
| 3/8" x 1/2" (LFWP22B-0608) | 1/2" x 1/2" (LFWP22B-08) | 1/2" x 1/2" (LFWP23B-08) | 3/4" x 1/2" (LFWP22B-1208) |
| 3/4" x 3/4" (LFWP22B-12) | |||
|
Elbow (Crimp x Crimp) |
|||
| 3/8" x 3/8" (LFWP19B-06) | 1/2" x 1/2" (LFWP19B-08) | 3/4" x 1/2" (LFWP19B-1208) | 3/4" x 3/4" (LFWP19B-12) |
| 3/4" x 3/4" (LFWP19B-1212PB) | 3/4" x 3/4" (LFWP19B-1212) | 3/4" x 1" (LFWP19B-1216) | 1" x 1" (LFWP19B-16) |
| 1 1/4" (LFWP19B-20PB) | 1 1/4" x 1 1/4" (LFWP19B-2020) | ||
|
Elbow (Crimp x MPT) |
|||
| 1/2" x 3/8" (LFWP20B-0806) | 1/2" x 1/2" (LFWP20B-0808) | 1/2" x 3/4" (LFWP20B-0812) | 3/4" x 3/4" (LFWP20B-12) |
|
Elbow (Crimp x Sweat) |
|||
| 1/2" x 1/2" (LFWP21B-08) | 1/2" x 3/4" (LFWP21B-0812) | 3/4" x 3/4" (LFWP21B-12 ) | 1" x 1" (LFWP21B-16) |
|
Tee (Crimp x Crimp x Crimp) |
|||
| 3/8" x 3/8" x 3/8" (LFWP18B-06) | 1/2" x 3/8" x 3/8" (LFWP18B-080606) | 1/2" x 3/8" x 1/2" (LFWP18B-080608) | 1/2" x 1/2" x 3/8" (LFWP18B-080806) |
| 1/2" x 1/2" x 1/2" (LFWP18B-08) | 1/2" x 1/2" x 3/4" (LFWP18B-080812) | 3/4" x 1/2" x 1/2" (LFWP18B-120808) | 3/4" x 3/4" x 3/8" (LFWP18B-121206) |
| 3/4" x 3/4" x 1/2" (LFWP18B-121208) | 3/4" x 1/2" x 3/4" (LFWP18B-120812) | 3/4" x 3/4" x 3/4" (LFWP18B-12) | 3/4" x 3/4" x 1" (LFWP18B-121216) |
| 1" x 3/4" x 3/4" (LFWP18B-161212) | 1" x 1" x 1/2" (LFWP18B-161608) | 1" x 1" x 3/4" (LFWP18B-161612) | 1" x 1" x 1" (LFWP18B-16) |
| 1 1/4" x 1 1/4" x 1" (LF-WP18B-202016) | 1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20) | ||
|
Test Plug |
|||
| 3/8" (LFWP24B-06) | 1/2" (LFWP24B-08) | 3/4" (LFWP24B-12) | 1" (LFWP24B-16) |
@ These fittings meet all the requirements under F1807 and F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Shanghai, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings¢ § +++ [G] |
MLTPL |
WPEX |
ASTM F877 |
|
Adapter |
|||
| 1/2" Crimp x 1/2" MPT (WP12P-08) | 1/2" Crimp x 3/4" MPT (WP12P-0812) | 3/4" Crimp x 3/4" MPT (WP12P-12) | |
|
Barb Coupling |
|||
| 1/2" Crimp (WP25P-08) | 3/4" Crimp (WP25P-12) | 3/8" Crimp (WP25P-0608) | |
|
Barb Elbow |
|||
| 1/2" Crimp (WP26P-08) | 3/4" Crimp (WP26P-12) | ||
|
Coupling |
|||
| 1/2" Crimp x 1/2" Crimp (WP15P-08) | 3/4" Crimp x 1/2" Crimp (WP15P-1208) | 3/4" Crimp x 3/4" Crimp (WP15P-12) | 1" Crimp x 1" Crimp (WP15P-16) |
| 1" Crimp x 3/4" Crimp (WP15P-1612) | |||
|
Elbow |
|||
| 1/2" Crimp x 1/2" Crimp (WP19P-08) | 1/2" Crimp x 1/2" MPT (WP20P-08) | 3/4" Crimp x 1/2" Crimp (WP19P-1208) | 3/4" Crimp x 1/2" MPT (WP20P-1208) |
| 3/4" Crimp x 3/4" Crimp (WP19P-1212) | 3/4" Crimp x 3/4" MPT (WP20P-1212) | 1" Crimp x 1" Crimp (WP19P-16) | |
|
Tee |
|||
| 1/2" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-08) | 1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812) | 1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812) | 3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808) |
| 3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808) | 3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812) | 3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812) | 3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208) |
| 3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208) | 3/4" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-12) | 3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216) | 3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216) |
| 1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212) | 1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608) | 1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608) | 1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612) |
| 1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612) | 1" Crimp x 1" Crimp x 1" Crimp (WP18P-16) | 1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212) | |
|
Test Plug |
|||
| 3/8" Crimp (WP24P-06) | 3/8" Crimp (WP27P-06) | 1/2" Crimp (WP24P-08) | 1/2" Crimp (WP27P-08) |
| 3/4" Crimp (WP24P-12) | 3/4" Crimp (WP27P-12) | 1" Crimp (WP24P-16) | 1" Crimp (WP27P-16) |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ § +++ [G] |
MLTPL |
WPEX |
ASTM F2159 |
|
Adapter |
|||
| 1/2" Crimp x 1/2" MPT (WP12P-08) | 1/2" Crimp x 3/4" MPT (WP12P-0812) | 3/4" Crimp x 3/4" MPT (WP12P-12) | |
|
Barb Coupling |
|||
| 1/2" Crimp (WP25P-08) | 3/4" Crimp (WP25P-12) | 3/8" Crimp (WP25P-0608) | |
|
Barb Elbow |
|||
| 1/2" Crimp (WP26P-08) | 3/4" Crimp (WP26P-12) | ||
|
Coupling |
|||
| 1/2" Crimp x 1/2" Crimp (WP15P-08) | 3/4" Crimp x 1/2" Crimp (WP15P-1208) | 3/4" Crimp x 3/4" Crimp (WP15P-12) | 1" Crimp x 1" Crimp (WP15P-16) |
| 1" Crimp x 3/4" Crimp (WP15P-1612) | |||
|
Elbow |
|||
| 1/2" Crimp x 1/2" Crimp (WP19P-08) | 1/2" Crimp x 1/2" MPT (WP20P-08) | 3/4" Crimp x 1/2" Crimp (WP19P-1208) | 3/4" Crimp x 1/2" MPT (WP20P-1208) |
| 3/4" Crimp x 3/4" Crimp (WP19P-1212) | 3/4" Crimp x 3/4" MPT (WP20P-1212) | 1" Crimp x 1" Crimp (WP19P-16) | |
|
Tee |
|||
| 1/2" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-08) | 1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812) | 1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812) | 3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808) |
| 3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808) | 3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812) | 3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812) | 3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208) |
| 3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208) | 3/4" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-12) | 3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216) | 3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216) |
| 1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212) | 1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608) | 1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608) | 1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612) |
| 1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612) | 1" Crimp x 1" Crimp x 1" Crimp (WP18P-16) | 1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212) | |
|
Test Plug |
|||
| 3/8" Crimp (WP24P-06) | 3/8" Crimp (WP27P-06) | 1/2" Crimp (WP24P-08) | 1/2" Crimp (WP27P-08) |
| 3/4" Crimp (WP24P-12) | 3/4" Crimp (WP27P-12) | 1" Crimp (WP24P-16) | 1" Crimp (WP27P-16) |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings¢ § +++ [G] |
MLTPL |
WPEX |
CSA B137.5 |
|
Adapter |
|||
| 1/2" Crimp x 1/2" MPT (WP12P-08) | 1/2" Crimp x 3/4" MPT (WP12P-0812) | 3/4" Crimp x 3/4" MPT (WP12P-12) | |
|
Barb Coupling |
|||
| 1/2" Crimp (WP25P-08) | 3/4" Crimp (WP25P-12) | 3/8" Crimp (WP25P-0608) | |
|
Barb Elbow |
|||
| 1/2" Crimp (WP26P-08) | 3/4" Crimp (WP26P-12) | ||
|
Coupling |
|||
| 1/2" Crimp x 1/2" Crimp (WP15P-08) | 3/4" Crimp x 1/2" Crimp (WP15P-1208) | 3/4" Crimp x 3/4" Crimp (WP15P-12) | 1" Crimp x 1" Crimp (WP15P-16) |
| 1" Crimp x 3/4" Crimp (WP15P-1612) | |||
|
Elbow |
|||
| 1/2" Crimp x 1/2" Crimp (WP19P-08) | 1/2" Crimp x 1/2" MPT (WP20P-08) | 3/4" Crimp x 1/2" Crimp (WP19P-1208) | 3/4" Crimp x 1/2" MPT (WP20P-1208) |
| 3/4" Crimp x 3/4" Crimp (WP19P-1212) | 3/4" Crimp x 3/4" MPT (WP20P-1212) | 1" Crimp x 1" Crimp (WP19P-16) | |
|
Tee |
|||
| 1/2" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-08) | 1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812) | 1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812) | 3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808) |
| 3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808) | 3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812) | 3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812) | 3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208) |
| 3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208) | 3/4" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-12) | 3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216) | 3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216) |
| 1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212) | 1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608) | 1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608) | 1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612) |
| 1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612) | 1" Crimp x 1" Crimp x 1" Crimp (WP18P-16) | 1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212) | |
|
Test Plug |
|||
| 3/8" Crimp (WP24P-06) | 3/8" Crimp (WP27P-06) | 1/2" Crimp (WP24P-08) | 1/2" Crimp (WP27P-08) |
| 3/4" Crimp (WP24P-12) | 3/4" Crimp (WP27P-12) | 1" Crimp (WP24P-16) | 1" Crimp (WP27P-16) |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 657
Processing time was 1 seconds