NSF Certified Products - Plumbing and Related Products

These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=49950&Standard=014&LowLead=Y&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Watts Regulator Company
815 Chestnut Street
North Andover, MA 01845
United States
978-689-6165
Visit this company's website

Facility : # 1 Zhejiang, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings@ ¢ § +++ [G]	Brass C69300	LF-WPEX	ASTM F1807
Coupling
3/8" x 3/8" (LFWP15B-0606)	1/2" (LFWP28B-08)	1/2" (LFWP28B-08PB)	1/2" x 3/8" (LFWP15B-0806)
1/2" x 1/2" (LFWP15B-0808)	3/4" (LFWP28B-12)	3/4" (LFWP28B-12PB)	3/4" x 1/2" (LFWP15B-1208)
3/4" x 3/4" (LFWP15B-1212)	1" (LFWP28B-16)	1" (LFWP28B-16PB)	1" x 3/4" (LFWP15B-1612)
1" x 1" (LFWP15B-1616)
Coupling (Crimp x Crimp)
3/4" x 1" (LFWP15B-1208)	1" x 1 1/4" (LFWP15B-1620)	1 1/4" x 1 1/4" (LFWP15B-2020)
Crimp Ring Coupling Kit (PEX X PEX)
3/8" (LFWP16B-06)	3/8" PEX x 3/8" PB (LFWP17B-06PB)	1/2" (LFWP16B-08)	1/2" PEX x 1/2" PB (LFWP17B-08PB)
3/4" (LFWP16B-12)	3/4" PEX x 3/4" PB (LFWP17B-12PB)	1" (LFWP16B-16)	1" PEX x 1" B (LFWP17B-16PB)
1 1/4" (LFWP16B-20)
Drip Tee (Crimp)
1/2" (LFWPDT-08)	3/4" (LFWPDT-12)	1" (LFWPDT-16)
Drop Ear Elbow (PEX x NPT)
3/8" x 1/2" (LFWP22B-0608)	1/2" x 1/2" (LFWP22B-08)	1/2" x 1/2" (LFWP23B-08)	3/4" x 1/2" (LFWP22B-1208)
3/4" x 3/4" (LFWP22B-12)
Elbow (Crimp x Crimp)
3/8" x 3/8" (LFWP19B-06)	1/2" x 1/2" (LFWP19B-08)	3/4" x 1/2" (LFWP19B-1208)	3/4" x 3/4" (LFWP19B-12)
3/4" x 3/4" (LFWP19B-1212)	3/4" x 3/4" (LFWP19B-1212PB)	3/4" x 1" (LFWP19B-1216)	1" x 1" (LFWP19B-16)
1 1/4" (LFWP19B-20PB)	1 1/4" x 1 1/4" (LFWP19B-2020)
Elbow (Crimp x MPT)
3/4" x 3/4" (LFWP20B-12)	1/2" x 3/4" (LFWP20B-0812)	1/2" x 1/2" (LFWP20B-0808)	1/2" x 3/8" (LFWP20B-0806)
Elbow (Crimp x Sweat)
1/2" x 1/2" (LFWP21B-08)	1/2" x 3/4" (LFWP21B-0812)	3/4" x 3/4" (LFWP21B-12 )	1" x 1" (LFWP21B-16)
Tee (Crimp x Crimp x Crimp)
3/8" x 3/8" x 3/8" (LFWP18B-06)	1/2" x 3/8" x 3/8" (LFWP18B-080606)	1/2" x 3/8" x 1/2" (LFWP18B-080608)	1/2" x 1/2" x 3/8" (LFWP18B-080806)
1/2" x 1/2" x 1/2" (LFWP18B-08)	1/2" x 1/2" x 3/4" (LFWP18B-080812)	3/4" x 1/2" x 1/2" (LFWP18B-120808)	3/4" x 3/4" x 3/8" (LFWP18B-121206)
3/4" x 3/4" x 1/2" (LFWP18B-121208)	3/4" x 1/2" x 3/4" (LFWP18B-120812)	3/4" x 3/4" x 3/4" (LFWP18B-12)	3/4" x 3/4" x 1" (LFWP18B-121216)
1" x 3/4" x 3/4" (LFWP18B-161212)	1" x 1" x 1/2" (LFWP18B-161608)	1" x 1" x 3/4" (LFWP18B-161612)	1" x 1" x 1" (LFWP18B-16)
1 1/4" x 1 1/4" x 1" (LF-WP18B-202016)	1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20)
Test Plug
3/8" (LFWP24B-06)	1/2" (LFWP24B-08)	3/4" (LFWP24B-12)	1" (LFWP24B-16)
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings@ ¢ § +++ [G]	Brass C69300	LF-WPEX	CSA B137.5
Coupling
3/8" x 3/8" (LFWP15B-0606)	1/2" (LFWP28B-08)	1/2" (LFWP28B-08PB)	1/2" x 3/8" (LFWP15B-0806)
1/2" x 1/2" (LFWP15B-0808)	3/4" (LFWP28B-12)	3/4" (LFWP28B-12PB)	3/4" x 1/2" (LFWP15B-1208)
3/4" x 3/4" (LFWP15B-1212)	1" (LFWP28B-16)	1" (LFWP28B-16PB)	1" x 3/4" (LFWP15B-1612)
1" x 1" (LFWP15B-1616)
Coupling (Crimp x Crimp)
3/4" x 1" (LFWP15B-1208)	1" x 1 1/4" (LFWP15B-1620)	1 1/4" x 1 1/4" (LFWP15B-2020)
Crimp Ring Coupling Kit (PEX X PEX)
3/8" (LFWP16B-06)	3/8" PEX x 3/8" PB (LFWP17B-06PB)	1/2" (LFWP16B-08)	1/2" PEX x 1/2" PB (LFWP17B-08PB)
3/4" (LFWP16B-12)	3/4" PEX x 3/4" PB (LFWP17B-12PB)	1" (LFWP16B-16)	1" PEX x 1" PB (LFWP17B-16PB)
1 1/4" (LFWP16B-20)
Drip Tee (Crimp)
1/2" (LFWPDT-08)	3/4" (LFWPDT-12)	1" (LFWPDT-16)
Drop Ear Elbow (PEX x NPT)
3/8" x 1/2" (LFWP22B-0608)	1/2" x 1/2" (LFWP22B-08)	1/2" x 1/2" (LFWP23B-08)	3/4" x 1/2" (LFWP22B-1208)
3/4" x 3/4" (LFWP22B-12)
Elbow (Crimp x Crimp)
3/8" x 3/8" (LFWP19B-06)	1/2" x 1/2" (LFWP19B-08)	3/4" x 1/2" (LFWP19B-1208)	3/4" x 3/4" (LFWP19B-12)
3/4" x 3/4" (LFWP19B-1212)	3/4" x 3/4" (LFWP19B-1212PB)	3/4" x 1" (LFWP19B-1216)	1" x 1" (LFWP19B-16)
1 1/4" (LFWP19B-20PB)	1 1/4" x 1 1/4" (LFWP19B-2020)
Elbow (Crimp x MPT)
1/2" x 3/8" (LFWP20B-0806)	1/2" x 1/2" (LFWP20B-0808)	1/2" x 3/4" (LFWP20B-0812)	3/4" x 3/4" (LFWP20B-12)
Elbow (Crimp x Sweat)
1/2" x 1/2" (LFWP21B-08)	1/2" x 3/4" (LFWP21B-0812)	3/4" x 3/4" (LFWP21B-12)	1" x 1" (LFWP21B-16)
Tee (Crimp x Crimp x Crimp)
3/8" x 3/8" x 3/8" (LFWP18B-06)	1/2" x 3/8" x 3/8" (LFWP18B-080606)	1/2" x 3/8" x 1/2" (LFWP18B-080608)	1/2" x 1/2" x 3/8" (LFWP18B-080806)
1/2" x 1/2" x 1/2" (LFWP18B-08)	1/2" x 1/2" x 3/4" (LFWP18B-080812)	3/4" x 1/2" x 1/2" (LFWP18B-120808)	3/4" x 3/4" x 3/8" (LFWP18B-121206)
3/4" x 3/4" x 1/2" (LFWP18B-121208)	3/4" x 1/2" x 3/4" (LFWP18B-120812)	3/4" x 3/4" x 3/4" (LFWP18B-12)	3/4" x 3/4" x 1" (LFWP18B-121216)
1" x 3/4" x 3/4" (LFWP18B-161212)	1" x 1" x 1/2" (LFWP18B-161608)	1" x 1" x 3/4" (LFWP18B-161612)	1" x 1" x 1" (LFWP18B-16)
1 1/4" x 1 1/4" x 1" (LF-WP18B-202016)	1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20)
Test Plug
3/8" (LFWP24B-06)	1/2" (LFWP24B-08)	3/4" (LFWP24B-12)	1" (LFWP24B-16)
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Facility : # 4 Zhejiang, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+ ¢ [G]	Brass	Watts	ASTM F877
Supply Stops
1/2" CTS x 3/8" COMP (LFQC389403)	1/2" CTS x 3/8" COMP (LFQC894A)	1/2" CTS x 3/8" COMP (LFQC894S)	1/2" CTS x 3/8" COMP (LFQC89A)
1/2" CTS x 3/8" COMP (LFQC89S)	3/8" CTS x 3/8" COMP (LFQC889A)	3/8" CTS x 3/8" COMP (LFQC889S)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings+ ¢ [G]	Brass	Watts	CSA B137.5
Double Reducing Union Tee
3/4" x 1/2" x 1/2" (LF4526RB-141010)	1" x 3/4" x 3/4" (LF4526RB-181414)
Drop Ear Elbow
1/2" (LF4521B-1008)	3/4" (LF4521B-1412)
End Stop
1/2" (LF4545B-10)	3/4" (LF4545B-14)	1" (LF4545B-18)
Female NPT Connector
1/2" (LF4510B-1008)	3/4" (LF4510B-1412)	1" (LF4510B-1816)
Female NPT Reducing Connector
3/4" x 1" (LF4510B-1416)	1" x 3/4" (LF4510B-1812)
Male NPT Connector
1/2" (LF4501B-1008)	3/4" (LF4501B-1412)	1" (LF4501B-1816)
Male NPT Reducing Connector
3/4" x 1" (LF4501B-1416)	1" x 3/4" (LF4501B-1812)
Reducing Union Connector
3/4" x 1/2" (LF4515RB-1410)	1" x 3/4" (LF4515RB-1814)
Reducing Union Elbow
3/4" x 1/2" (LF4517RB-1410)	1" x 3/4" (LF4517RB-1814)
Reducing Union Tee
3/4" x 3/4" x 1/2" (LF4524RB-141410)	3/4" x 1/2" x 3/4" (LF4524RB-141014)	1" x 1" x 3/4" (LF4524RB-181814)	1" x 3/4" x 1" (LF4524RB-181418)
Slip Connector
1/2" (LF4516B-10)	3/4" (LF4516B-14)	1" (LF4516B-18)
Stackable Union Elbow
1/2" (LF4518B-10)	3/4" (LF4518B-14)	1" (LF4518B-18)
Stackable Union Elbow 45°
1/2" (LF4522B-10)	3/4" (LF4522B-14)	1" (LF4522B-18)
Supply Stops
1/2" CTS x 3/8" COMP (LFQC389403)	1/2" CTS x 3/8" COMP (LFQC894A)	1/2" CTS x 3/8" COMP (LFQC894S)	1/2" CTS x 3/8" COMP (LFQC89A)
1/2" CTS x 3/8" COMP (LFQC89S)	3/8" CTS x 3/8" COMP (LFQC889A)	3/8" CTS x 3/8" COMP (LFQC889S)
Union Connector
1/2" (LF4515B-10)	3/4" (LF4515B-14)	1" (LF4515B-18)
Union Elbow
1/2" (LF4517B-10)	3/4" (LF4517B-14)	1" (LF4517B-18)
Union Elbow 45°
1/2" (LF4522B-10)	3/4" (LF4522B-14)	1" (LF4522B-18)
Union Tee
1/2" (LF4523B-10)	3/4" (LF4523B-14)	3/4" (LF4531B-141514)	1" (LF4523B-18)
1" (LF4531B-181518)
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Facility : Kansas City, MO

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe! @ ^ ¢ § +++ [G]	PEX 5306	PlumbFLOW	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe@ ^ ¢ +++ [G]	PEX 5306	PlumbFLOW	CSA B137.5
1/8" - 2"
@ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! $ ^ ¢ § +++ [G]	PEX 5006	RadiantFLOW	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. $ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe$ ^ ¢ +++ [G]	PEX 5006	RadiantFLOW	CSA B137.5
1/8" - 2"
$ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! $ ^ ¢ § +++ [G]	PEX 5006	RadiantPEX	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. $ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe$ ^ ¢ +++ [G]	PEX 5006	RadiantPEX	CSA B137.5
1/8" - 2"
$ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! % ^ § +++ [G]	PEX 5006	RadiantPEX+ (w/O2 Barrier)	ASTM F876/F877
1/8" - 1"
! Product may or may not bear the NSF U.P. code marking. % Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe% ^ ¢ +++ [G]	PEX 5006	RadiantPEX+ (w/O2 Barrier)	CSA B137.5
1/8" - 1"
% Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! @ ^ ¢ § +++ [G]	PEX 5306	RF PEX™ by WATTS	ASTM F876/F877
1/8" – 2"
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! @ ^ ¢ § +++ [G]	PEX 5306	RF PEX™ by Watts	AWWA C904
1/2" – 1 1/2"
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe@ ^ ¢ § +++ [G]	PEX 5306	RF PEX™ by WATTS	CSA B137.5
1/8" – 2"
@ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! @ ^ ¢ § +++ [G]	PEX 5306	WaterPEX	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! @ ^ ¢ § +++ [G]	PEX 5306	WaterPEX	AWWA C904
1/2" – 1 1/2"
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe@ ^ ¢ +++ [G]	PEX 5306	WaterPEX	CSA B137.5
1/8" - 2"
@ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! & ^ § +++ [G]	PEX 5006	WaterPEX+	ASTM F876/F877
3/8"
1/2"
3/4"
! Product may or may not bear the NSF U.P. code marking. & Certified product is blue or red in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe& ^ ¢ +++ [G]	PEX 5006	WaterPEX+	CSA B137.5
3/8"
1/2"
3/4"
& Certified product is blue or red in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! # ^ § +++ [G]	PEX 5006	Watts Heating PEX (w/ O2 Barrier)	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. # Certified product is natural or red in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe# ^ ¢ +++ [G]	PEX 5006	Watts Heating PEX (w/ O2 Barrier)	CSA B137.5
1/8" - 2" SDR 9
# Certified product is natural or red in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe% ^ ¢ +++ [G]	PEX 5006	Watts Radiant PEX (w/ O2 Barrier)	CSA B137.5
1/8" - 2"
% Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe! % ^ § +++ [G]	PEX 5006	Watts Radiant PEX (w/ O2 Barrier)	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. % Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Radiant Floor Heating

Product Type	Material Type	Trade Name	Product Standard
Pipe! $ ^ ¢ § [G]	PEX 5006	RadiantFLOW	ASTM F876/F877
1/8" - 2"
! Product may or may not bear the NSF U.P. code marking. $ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pipe$ ^ ¢ [G]	PEX 5006	RadiantFLOW	CSA B137.5
1/8" - 2"
$ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Tubing! % ^ § [G]	PEX 5006	RadiantPEX+ (w/O2 Barrier)	ASTM F876/F877
1/8" - 1"
! Product may or may not bear the NSF U.P. code marking. % Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Tubing% ^ ¢ [G]	PEX 5006	RadiantPEX+ (w/O2 Barrier)	CSA B137.5
1/8" - 1"
% Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Facility : Franklin, NH

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fitttings¢ § +++ [G]	MLTPL	Watts	ASTM F877
Pendant[1]
LFFPSF-1L-12	LFFPSF-1L-16	LFFPSF-1R-12	LFFPSF-1R-16
LFFPSF-1S-12	LFFPSF-1S-16	LFFPSF-2-12	LFFPSF-2-16
[1] LF - Lead free 1 - 1 port 2 - 2 ports S - Straight port R - Right port L - Left port 12 - 3/4" 16 - 1" ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ § +++ [G]	MLTPL	Watts	CSA B137.5
Pendant[1]
LFFPSF-1L-12	LFFPSF-1L-16	LFFPSF-1R-12	LFFPSF-1R-16
LFFPSF-1S-12	LFFPSF-1S-16	LFFPSF-2-12	LFFPSF-2-16
[1] LF - Lead free 1 - 1 port 2 - 2 ports S - Straight port R - Right port L - Left port 12 - 3/4" 16 - 1" ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Facility : Chesnee, SC

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings@ ¢ § +++ [G]	Brass C69300	LF-WPEX	ASTM F1807
Adapter
3/8" x 1/2" (LFWP12B-0608)	1/2" x 1/2" (LFWP12B-0808)	1/2" x 3/4" (LFWP12B-0812)	3/4" x 1/2" (LFWP12B-1208)
3/4" x 3/4" (LFWP12B-1212)	3/4" x 1" (LFWP12B-1216)	1" x 3/4" (LFWP12B-1612)	1" x 1" (LFWP12B-1616)
Adapter (Crimp x FPT)
1/2" x 1/2" (LFWP13B-0808)	1/2" x 3/4" (LFWP13B-0812)	3/4" x 1/2" (LFWP13B-1208)	3/4" x 3/4" (LFWP13B-1212)
3/4" x 1" (LFWP13B-1216)	1" x 3/4" (LFWP13B-1612)	1" x 1" (LFWP13B-1616)	1 1/4" x 1 1/4" (LFWP13B-2020)
Adapter (Crimp x NPT)
1 1/4" x 1" (LFWP12B-2016)	1 1/4" x 1 1/4" (LFWP12B-2020)
Adapter (FS)
1/2" x 1/2" (LFWP11B-0808)	3/4" x 3/4" (LFWP11B-1212)	1" x 1" (LFWP11B-1616)
Adapter (Female Sweat x Crimp)
1/2" x 3/4" (LFWP11B-0812)	1" x 1 1/4" (LFWP11B-1620)	1 1/4" x 1 1/4" (LFWP11B-2020)
Adapter (MS)
1/2" x 3/8" (LFWP10B-0806)	1/2" x 1/2" (LFWP10B-0808)	3/4" x 3/4" (LFWP10B-1212)	1" x 1" (LFWP10B-1616)
1 1/4" x 1 1/4" (LFWP10B-2020PB)	1 1/4" x 1 1/4" (LFWP10B-2020)
Adapter (Male Sweat x Crimp)
1" x 1 1/4" (LFWP10B-1620)
Coupling
3/8" x 3/8" (LFWP15B-0606)	1/2" (LFWP28B-08)	1/2" (LFWP28B-08PB)	1/2" x 3/8" (LFWP15B-0806)
1/2" x 1/2" (LFWP15B-0808)	3/4" (LFWP28B-12)	3/4" (LFWP28B-12PB)	3/4" x 1/2" (LFWP15B-1208)
3/4" x 3/4" (LFWP15B-1212)	1" (LFWP28B-16)	1" (LFWP28B-16PB)	1" x 3/4" (LFWP15B-1612)
1" x 1" (LFWP15B-1616)
Coupling (Crimp x Crimp)
3/4" x 1" (LFWP15B-1208)	1" x 1 1/4" (LFWP15B-1620)	1 1/4" x 1 1/4" (LFWP15B-2020)
Crimp Ring Coupling Kit (PEX X PEX)
3/8" (LFWP16B-06)	3/8" PEX x 3/8" PB (LFWP17B-06PB)	1/2" (LFWP16B-08)	1/2" PEX x 1/2" PB (LFWP17B-08PB)
3/4" (LFWP16B-12)	3/4" PEX x 3/4" PB (LFWP17B-12PB)	1" (LFWP16B-16)	1" PEX x 1" PB (LFWP17B-16PB)
1 1/4" (LFWP16B-20)
Drip Tee (Crimp)
1/2" (LFWPDT-08)	3/4" (LFWPDT-12)	1" (LFWPDT-16)
Drop Ear Elbow (PEX x NPT)
3/8" x 1/2" (LFWP22B-0608)	1/2" x 1/2" (LFWP22B-08)	1/2" x 1/2" (LFWP23B-08)	3/4" x 1/2" (LFWP22B-1208)
3/4" x 3/4" (LFWP22B-12)
Elbow (Crimp x Crimp)
3/8" x 3/8" (LFWP19B-06)	1/2" x 1/2" (LFWP19B-08)	3/4" x 1/2" (LFWP19B-1208)	3/4" x 3/4" (LFWP19B-12)
3/4" x 3/4" (LFWP19B-1212)	3/4" x 3/4" (LFWP19B-1212PB)	3/4" x 1" (LFWP19B-1216)	1" x 1" (LFWP19B-16)
1 1/4" (LFWP19B-20PB)	1 1/4" x 1 1/4" (LFWP19B-2020)
Elbow (Crimp x MPT)
1/2" x 3/8" (LFWP20B-0806)	1/2" x 1/2" (LFWP20B-0808)	1/2" x 3/4" (LFWP20B-0812)	3/4" x 3/4" (LFWP20B-12)
Elbow (Crimp x Sweat)
1/2" x 1/2" (LFWP21B-08)	1/2" x 3/4" (LFWP21B-0812)	3/4" x 3/4" (LFWP21B-12 )	1" x 1" (LFWP21B-16)
Tee (Crimp x Crimp x Crimp)
3/8" x 3/8" x 3/8" (LFWP18B-06)	1/2" x 3/8" x 3/8" (LFWP18B-080606)	1/2" x 3/8" x 1/2" (LFWP18B-080608)	1/2" x 1/2" x 3/8" (LFWP18B-080806)
1/2" x 1/2" x 1/2" (LFWP18B-08)	1/2" x 1/2" x 3/4" (LFWP18B-080812)	3/4" x 1/2" x 1/2" (LFWP18B-120808)	3/4" x 3/4" x 3/8" (LFWP18B-121206)
3/4" x 3/4" x 1/2" (LFWP18B-121208)	3/4" x 1/2" x 3/4" (LFWP18B-120812)	3/4" x 3/4" x 3/4" (LFWP18B-12)	3/4" x 3/4" x 1" (LFWP18B-121216)
1" x 3/4" x 3/4" (LFWP18B-161212)	1" x 1" x 1/2" (LFWP18B-161608)	1" x 1" x 3/4" (LFWP18B-161612)	1" x 1" x 1" (LFWP18B-16)
1 1/4" x 1 1/4" x 1" (LF-WP18B-202016)	1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20)
Test Plug
3/8" (LFWP24B-06)	1/2" (LFWP24B-08)	3/4" (LFWP24B-12)	1" (LFWP24B-16)
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings@ ¢ § +++ [G]	Brass C69300	LF-WPEX	CSA B137.5
Adapter
3/8" x 1/2" (LFWP12B-0608)	1/2" x 1/2" (LFWP12B-0808)	1/2" x 3/4" (LFWP12B-0812)	3/4" x 1/2" (LFWP12B-1208)
3/4" x 3/4" (LFWP12B-1212)	3/4" x 1" (LFWP12B-1216)	1" x 3/4" (LFWP12B-1612)	1" x 1" (LFWP12B-1616)
Adapter (Crimp x FPT)
1/2" x 1/2" (LFWP13B-0808)	1/2" x 3/4" (LFWP13B-0812)	3/4" x 1/2" (LFWP13B-1208)	3/4" x 3/4" (LFWP13B-1212)
3/4" x 1" (LFWP13B-1216)	1" x 3/4" (LFWP13B-1612)	1" x 1" (LFWP13B-1616)	1 1/4" x 1 1/4" (LFWP13B-2020)
Adapter (Crimp x NPT)
1 1/4" x 1" (LFWP12B-2016)	1 1/4" x 1 1/4" (LFWP12B-2020)
Adapter (FS)
1/2" x 1/2" (LFWP11B-0808)	3/4" x 3/4" (LFWP11B-1212)	1" x 1" (LFWP11B-1616)
Adapter (Female Sweat x Crimp)
1/2" x 3/4" (LFWP11B-0812)	1" x 1 1/4" (LFWP11B-1620)	1 1/4" x 1 1/4" (LFWP11B-2020)
Adapter (MS)
1/2" x 3/8" (LFWP10B-0806)	1/2" x 1/2" (LFWP10B-0808)	3/4" x 3/4" (LFWP10B-1212)	1" x 1" (LFWP10B-1616)
1 1/4" x 1 1/4" (LFWP10B-2020PB)	1 1/4" x 1 1/4" (LFWP10B-2020)
Adapter (Male Sweat x Crimp)
1" x 1 1/4" (LFWP10B-1620)
Coupling
3/8" x 3/8" (LFWP15B-0606)	1/2" (LFWP28B-08)	1/2" (LFWP28B-08PB)	1/2" x 3/8" (LFWP15B-0806)
1/2" x 1/2" (LFWP15B-0808)	3/4" (LFWP28B-12)	3/4" (LFWP28B-12PB)	3/4" x 1/2" (LFWP15B-1208)
3/4" x 3/4" (LFWP15B-1212)	1" (LFWP28B-16)	1" (LFWP28B-16PB)	1" x 3/4" (LFWP15B-1612)
1" x 1" (LFWP15B-1616)
Coupling (Crimp x Crimp)
3/4" x 1" (LFWP15B-1208)	1" x 1 1/4" (LFWP15B-1620)	1 1/4" x 1 1/4" (LFWP15B-2020)
Crimp Ring Coupling Kit (PEX X PEX)
3/8" (LFWP16B-06)	3/8" PEX x 3/8" PB (LFWP17B-06PB)	1/2" (LFWP16B-08)	1/2" PEX x 1/2" PB (LFWP17B-08PB)
3/4" (LFWP16B-12)	3/4" PEX x 3/4" PB (LFWP17B-12PB)	1" (LFWP16B-16)	1" PEX x 1" PB (LFWP17B-16PB)
1 1/4" (LFWP16B-20)
Drip Tee (Crimp)
1/2" (LFWPDT-08)	3/4" (LFWPDT-12)	1" (LFWPDT-16)
Drop Ear Elbow (PEX x NPT)
3/8" x 1/2" (LFWP22B-0608)	1/2" x 1/2" (LFWP22B-08)	1/2" x 1/2" (LFWP23B-08)	3/4" x 1/2" (LFWP22B-1208)
3/4" x 3/4" (LFWP22B-12)
Elbow (Crimp x Crimp)
3/8" x 3/8" (LFWP19B-06)	1/2" x 1/2" (LFWP19B-08)	3/4" x 1/2" (LFWP19B-1208)	3/4" x 3/4" (LFWP19B-12)
3/4" x 3/4" (LFWP19B-1212PB)	3/4" x 3/4" (LFWP19B-1212)	3/4" x 1" (LFWP19B-1216)	1" x 1" (LFWP19B-16)
1 1/4" (LFWP19B-20PB)	1 1/4" x 1 1/4" (LFWP19B-2020)
Elbow (Crimp x MPT)
1/2" x 3/8" (LFWP20B-0806)	1/2" x 1/2" (LFWP20B-0808)	1/2" x 3/4" (LFWP20B-0812)	3/4" x 3/4" (LFWP20B-12)
Elbow (Crimp x Sweat)
1/2" x 1/2" (LFWP21B-08)	1/2" x 3/4" (LFWP21B-0812)	3/4" x 3/4" (LFWP21B-12 )	1" x 1" (LFWP21B-16)
Tee (Crimp x Crimp x Crimp)
3/8" x 3/8" x 3/8" (LFWP18B-06)	1/2" x 3/8" x 3/8" (LFWP18B-080606)	1/2" x 3/8" x 1/2" (LFWP18B-080608)	1/2" x 1/2" x 3/8" (LFWP18B-080806)
1/2" x 1/2" x 1/2" (LFWP18B-08)	1/2" x 1/2" x 3/4" (LFWP18B-080812)	3/4" x 1/2" x 1/2" (LFWP18B-120808)	3/4" x 3/4" x 3/8" (LFWP18B-121206)
3/4" x 3/4" x 1/2" (LFWP18B-121208)	3/4" x 1/2" x 3/4" (LFWP18B-120812)	3/4" x 3/4" x 3/4" (LFWP18B-12)	3/4" x 3/4" x 1" (LFWP18B-121216)
1" x 3/4" x 3/4" (LFWP18B-161212)	1" x 1" x 1/2" (LFWP18B-161608)	1" x 1" x 3/4" (LFWP18B-161612)	1" x 1" x 1" (LFWP18B-16)
1 1/4" x 1 1/4" x 1" (LF-WP18B-202016)	1 1/4" x 1 1/4" x 1 1/4" (LF-WP18B-20)
Test Plug
3/8" (LFWP24B-06)	1/2" (LFWP24B-08)	3/4" (LFWP24B-12)	1" (LFWP24B-16)
@ These fittings meet all the requirements under F1807 and F877. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Facility : Shanghai, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ § +++ [G]	MLTPL	WPEX	ASTM F877
Adapter
1/2" Crimp x 1/2" MPT (WP12P-08)	1/2" Crimp x 3/4" MPT (WP12P-0812)	3/4" Crimp x 3/4" MPT (WP12P-12)
Barb Coupling
1/2" Crimp (WP25P-08)	3/4" Crimp (WP25P-12)	3/8" Crimp (WP25P-0608)
Barb Elbow
1/2" Crimp (WP26P-08)	3/4" Crimp (WP26P-12)
Coupling
1/2" Crimp x 1/2" Crimp (WP15P-08)	3/4" Crimp x 1/2" Crimp (WP15P-1208)	3/4" Crimp x 3/4" Crimp (WP15P-12)	1" Crimp x 1" Crimp (WP15P-16)
1" Crimp x 3/4" Crimp (WP15P-1612)
Elbow
1/2" Crimp x 1/2" Crimp (WP19P-08)	1/2" Crimp x 1/2" MPT (WP20P-08)	3/4" Crimp x 1/2" Crimp (WP19P-1208)	3/4" Crimp x 1/2" MPT (WP20P-1208)
3/4" Crimp x 3/4" Crimp (WP19P-1212)	3/4" Crimp x 3/4" MPT (WP20P-1212)	1" Crimp x 1" Crimp (WP19P-16)
Tee
1/2" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-08)	1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812)	1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812)	3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808)
3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808)	3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812)	3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812)	3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208)
3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208)	3/4" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-12)	3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216)	3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216)
1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212)	1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608)	1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608)	1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612)
1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612)	1" Crimp x 1" Crimp x 1" Crimp (WP18P-16)	1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212)
Test Plug
3/8" Crimp (WP24P-06)	3/8" Crimp (WP27P-06)	1/2" Crimp (WP24P-08)	1/2" Crimp (WP27P-08)
3/4" Crimp (WP24P-12)	3/4" Crimp (WP27P-12)	1" Crimp (WP24P-16)	1" Crimp (WP27P-16)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ § +++ [G]	MLTPL	WPEX	ASTM F2159
Adapter
1/2" Crimp x 1/2" MPT (WP12P-08)	1/2" Crimp x 3/4" MPT (WP12P-0812)	3/4" Crimp x 3/4" MPT (WP12P-12)
Barb Coupling
1/2" Crimp (WP25P-08)	3/4" Crimp (WP25P-12)	3/8" Crimp (WP25P-0608)
Barb Elbow
1/2" Crimp (WP26P-08)	3/4" Crimp (WP26P-12)
Coupling
1/2" Crimp x 1/2" Crimp (WP15P-08)	3/4" Crimp x 1/2" Crimp (WP15P-1208)	3/4" Crimp x 3/4" Crimp (WP15P-12)	1" Crimp x 1" Crimp (WP15P-16)
1" Crimp x 3/4" Crimp (WP15P-1612)
Elbow
1/2" Crimp x 1/2" Crimp (WP19P-08)	1/2" Crimp x 1/2" MPT (WP20P-08)	3/4" Crimp x 1/2" Crimp (WP19P-1208)	3/4" Crimp x 1/2" MPT (WP20P-1208)
3/4" Crimp x 3/4" Crimp (WP19P-1212)	3/4" Crimp x 3/4" MPT (WP20P-1212)	1" Crimp x 1" Crimp (WP19P-16)
Tee
1/2" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-08)	1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812)	1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812)	3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808)
3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808)	3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812)	3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812)	3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208)
3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208)	3/4" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-12)	3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216)	3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216)
1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212)	1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608)	1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608)	1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612)
1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612)	1" Crimp x 1" Crimp x 1" Crimp (WP18P-16)	1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212)
Test Plug
3/8" Crimp (WP24P-06)	3/8" Crimp (WP27P-06)	1/2" Crimp (WP24P-08)	1/2" Crimp (WP27P-08)
3/4" Crimp (WP24P-12)	3/4" Crimp (WP27P-12)	1" Crimp (WP24P-16)	1" Crimp (WP27P-16)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Fittings¢ § +++ [G]	MLTPL	WPEX	CSA B137.5
Adapter
1/2" Crimp x 1/2" MPT (WP12P-08)	1/2" Crimp x 3/4" MPT (WP12P-0812)	3/4" Crimp x 3/4" MPT (WP12P-12)
Barb Coupling
1/2" Crimp (WP25P-08)	3/4" Crimp (WP25P-12)	3/8" Crimp (WP25P-0608)
Barb Elbow
1/2" Crimp (WP26P-08)	3/4" Crimp (WP26P-12)
Coupling
1/2" Crimp x 1/2" Crimp (WP15P-08)	3/4" Crimp x 1/2" Crimp (WP15P-1208)	3/4" Crimp x 3/4" Crimp (WP15P-12)	1" Crimp x 1" Crimp (WP15P-16)
1" Crimp x 3/4" Crimp (WP15P-1612)
Elbow
1/2" Crimp x 1/2" Crimp (WP19P-08)	1/2" Crimp x 1/2" MPT (WP20P-08)	3/4" Crimp x 1/2" Crimp (WP19P-1208)	3/4" Crimp x 1/2" MPT (WP20P-1208)
3/4" Crimp x 3/4" Crimp (WP19P-1212)	3/4" Crimp x 3/4" MPT (WP20P-1212)	1" Crimp x 1" Crimp (WP19P-16)
Tee
1/2" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-08)	1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812)	1/2" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-080812)	3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808)
3/4" Crimp x 1/2" Crimp x 1/2" Crimp (WP18P-120808)	3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812)	3/4" Crimp x 1/2" Crimp x 3/4" Crimp (WP18P-120812)	3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208)
3/4" Crimp x 3/4" Crimp x 1/2" Crimp (WP18P-121208)	3/4" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-12)	3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216)	3/4" Crimp x 3/4" Crimp x 1" Crimp (WP18P-121216)
1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212)	1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608)	1" Crimp x 1" Crimp x 1/2" Crimp (WP18P-161608)	1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612)
1" Crimp x 1" Crimp x 3/4" Crimp (WP18P-161612)	1" Crimp x 1" Crimp x 1" Crimp (WP18P-16)	1" Crimp x 3/4" Crimp x 3/4" Crimp (WP18P-161212)
Test Plug
3/8" Crimp (WP24P-06)	3/8" Crimp (WP27P-06)	1/2" Crimp (WP24P-08)	1/2" Crimp (WP27P-08)
3/4" Crimp (WP24P-12)	3/4" Crimp (WP27P-12)	1" Crimp (WP24P-16)	1" Crimp (WP27P-16)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 601
Processing time was 1 seconds

NSF Product and Service Listings