These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=4C660&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Vanguard Pipe & Fittings Ltd. | |
| 8125 North Fraser Way | |
| Burnaby, BC V5J 5M8 | |
| Canada | |
| 800-747-3739 | |
| 604-431-5024 |
Facility : Burnaby, British Columbia, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Tubing (PW)+ § [G] |
PE 3608 |
Bruiser |
ASTM D2239 |
| 1/2" – 2" SIDR 7 | |||
| 1/2" – 2" SIDR 9 | |||
| 1/2" – 2" SIDR 11.5 | |||
| 1/2" – 2" SIDR 15 | |||
| 1/2" – 2" SIDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing+ ¢ [G] |
PE 4710 |
Bruiser |
ASTM D2239 |
| 1/2" - 2" SIDR 7 | |||
| 1/2" - 2" SIDR 9 | |||
| 1/2" - 2" SIDR 11.5 | |||
| 1/2" – 2" SIDR 15 | |||
| 1/2" - 2" SDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing (PW)+ § [G] |
PE 3608 |
Bruiser |
ASTM D2737 |
| 1/2" – 2" SDR 7.3 | |||
| 1/2" – 2" SDR 9 | |||
| 1/2" – 2" SDR 11 | |||
| 1/2" – 2" SDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing+ ¢ [G] |
PE 4710 |
Bruiser |
ASTM D2737 |
| 1/2" - 2" SDR 7.3 | |||
| 1/2" - 2" SDR 9 | |||
| 1/2" - 2" SDR 11 | |||
| 1/2" - 2" SDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing+ ¢ [G] |
PE 4710 |
Bruiser |
ASTM D3035 |
| 1/2" - 2" DR 11 | |||
| 1/2" - 2" DR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing+ § [G] |
PE 3608 |
Bruiser |
AWWA C901 |
| 1/2" – 2" SDR 9 | |||
| 1/2" – 2" SIDR 7 | |||
| 1/2" – 2" SIDR 9 | |||
| 1/2" – 2" SIDR 11.5 | |||
| 1/2" – 2" SIDR 15 | |||
| 1/2" – 2" SIDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing+ ¢ [G] |
PE 4710 |
Bruiser |
AWWA C901 |
| 1/2" - 2" SDR 9 | |||
| 1/2" - 2" SIDR 7 | |||
| 1/2" - 2" SIDR 9 | |||
| 1/2" - 2" SIDR 11.5 | |||
| 1/2" - 2" SIDR 15 | |||
| 1/2" - 2" SIDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANFLEX™ |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing+ ¢ [G] |
PE 4710 |
Bruiser |
CSA B137.1 |
| 3/4" Series 160 | |||
| 1" Series 125 | |||
| 1 1/4" Series 125 | |||
| 1 1/2" Series 125 | |||
| 2" Series 100 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing# $ @ ^ ~ ¢ § +++ [G] |
PEX |
CANFLEX™ |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPEX™ |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ @ ^ ~ ¢ § +++ [G] |
PEX |
CANPEX™ |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
CanPEX Barrier |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
CanPEX Barrier |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX |
CanPEX Barrier |
CSA B137.5 |
| 1/4" – 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX |
CanPEX Barrier |
CSA B137.5 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
CanPEX OXY Barrier |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
CanPEX OXY Barrier |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX |
CanPEX OXY Barrier |
CSA B137.5 |
| 1/4" - 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX |
CanPEX OXY Barrier |
CSA B137.5 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ § µ +++ [G] |
PEX 5306 |
CanPEX Ultra |
ASTM F876/F877 |
| 3/8" – 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ § µ +++ [G] |
PEX |
CanPEX Ultra |
CSA B137.5 |
| 3/8" – 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPEX™ UV |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX |
CANPEX™ UV |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPEX™ UV + |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX |
CANPEX™ UV + |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPEX™ UV + MD |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX |
CANPEX™ UV + MD |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPEX™ UV Plus |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX |
CANPEX™ UV Plus |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPEX™ UV Plus MD |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX |
CANPEX™ UV Plus MD |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
CANPLUMB™ |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ @ ^ ~ ¢ § +++ [G] |
PEX |
CANPLUMB™ |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
CanRay |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
CanRay |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX |
CanRay |
CSA B137.5 |
| 1/4" – 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX |
CanRay |
CSA B137.5 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing (PW)+ § [G] |
PE 3608 |
Proguard |
ASTM D2239 |
| 1/2" – 2" SIDR 7 | |||
| 1/2" – 2" SIDR 9 | |||
| 1/2" – 2" SIDR 11.5 | |||
| 1/2" – 2" SIDR 15 | |||
| 1/2" – 2" SIDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing (PW)+ § [G] |
PE 3608 |
Proguard |
ASTM D2737 |
| 1/2" – 2" SDR 9 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing+ § [G] |
PE 3608 |
Proguard |
AWWA C901 |
| 1/2" – 2" SDR 9 | |||
| 1/2" – 2" SIDR 7 | |||
| 1/2" – 2" SIDR 9 | |||
| 1/2" – 2" SIDR 11.5 | |||
| 1/2" – 2" SIDR 15 | |||
| 1/2" – 2" SIDR 19 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
RadiantMax |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
RadiantMax |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX |
RadiantMax |
CSA B137.5 |
| 1/4" – 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX |
RadiantMax |
CSA B137.5 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ? @ ^ ~ ¢ § +++ [G] |
PEX 5306 |
Vanex |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white and blue pipe.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing+++ [G] |
PEX 5006 |
Vanex Barrier |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ @ ^ ~ ¢ § +++ [G] |
PEX |
Vanex |
CSA B137.5 |
| 3/8" – 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
@ Blue, natural, red, or white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX |
Vanex Barrier |
CSA B137.5 |
| 1/4" – 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! # $ ^ ~ ¢ £ § +++ [G] |
PEX 5006 |
Vanex Barrier |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
! Orange, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ £ § +++ [G] |
PEX |
Vanex Barrier |
CSA B137.5 |
| 1/4" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
£ This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ § µ +++ [G] |
PEX 5306 |
Vanex Ultra |
ASTM F876/F877 |
| 3/8" – 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# $ ^ ~ ¢ § µ +++ [G] |
PEX |
Vanex Ultra |
CSA B137.5 |
| 3/8" – 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Vanguard Pipe and Fittings
LTD. Installation/assembly instructions titled “Installation Guidelines for Vanguard
Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 91
Processing time was 0 seconds

