These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=50570&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| J C Whitlam Mfg Company | |
| 200 West Walnut Street | |
| P.O. Box 380 | |
| Wadsworth, OH 44282 | |
| United States | |
| 330-334-2524 |
Facility : Wadsworth, OH
Joining Materials
| Product Type | General Material | For Use With | Trade Name | Product Standard |
| Primer (2)+ [G] | PVC/CPVC | PW, DWV | Whitlam Clear Primer | ASTM F656 |
| Primer (2)+ [G] | PVC/CPVC | PW, DWV | Whitlam Purple Primer | ASTM F656 |
| Primer (2)+ [G] | PVC/CPVC | PW, DWV | Whitlam Low-VOC Clear Primer | ASTM F656 |
| Primer (2)+ [G] | PVC/CPVC | PW, DWV | Whitlam Low-VOC Purple Primer | ASTM F656 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Whitlam PVC Clear Medium Bodied | ASTM D2564 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Whitlam PVC Clear Regular Bodied | ASTM D2564 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Whitlam PVC Gray Medium Bodied | ASTM D2564 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Pro-Green Irrigation Cement | ASTM D2564 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Shark Bite PVC Cement | ASTM D2564 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Turf-Pool & Repair Cement | ASTM D2564 |
| Solvent Cement (1,2)+ [G] | PVC | PW, DWV | Whitlam Weatherproof 1 Step Low VOC Medium PVC Cement | ASTM D2564 |
| Solvent Cement (2,3)+ [G] | PVC | PW, DWV | Whitlam Low VOC Clear or Gray Heavy Body Cement PVC | ASTM D2564 |
| Solvent Cement (2,3)+ [G] | PVC | PW, DWV | Whitlam Low VOC Clear or Gray Medium Body Cement | ASTM D2564 |
| Solvent Cement (2,3)+ [G] | PVC | PW, DWV | Whitlam Low VOC Clear or Gray Regular Body Cement | ASTM D2564 |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
(1) The compliance of this product with the health effects requirements of NSF/ANSI Standard
61 was determined based on the testing of pipe and fittings assembled using the cement
and Whitlam Purple Primer.
(2) This product is acceptable for use with pipe and fittings sized 1/2" and greater
diameter.
(3) The compliance of this product with the health effects requirements of NSF/ANSI Standard
61 was determined based on the testing of pipe and fittings assembled using the cement
and Whitlam Low-VOC Clear or Purple Primer.
Thread Compounds, Sealants and Lubricants
| Product Type | For Use With | Trade Name | |
| Lubricant+ [G] | PW, DWV, SW | Blue Lube Gasket Paste | |
| Thread Sealant+++ [G] | PW, DWV, SW | Blue Magic Industrial Grade Pipe Joint Compound | |
| Lubricant+ [G] | PW, DWV, SW | Gasket Lube Paste | |
| Lubricant++ [G] | PW, DWV, SW | Pipe Slime Gasket Lube | |
| Thread Sealant+++ [G] | PW, DWV, SW | SELECT-UNYTE | |
| Thread Sealant+++ [G] | PW, DWV, SW | T-U Type 555 | |
| Thread Sealant+++ [G] | PW, DWV, SW | Talon Thread Sealant | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 21
Processing time was 0 seconds

