These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=50820&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Uponor | |
| 5925 148th Street West | |
| Apple Valley, MN 55124 | |
| United States | |
| 800-321-4739 | |
| 952-891-2000 |
Facility : Frankfort, IL
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Elbow (MIP) |
|||
| 1/2" x 1/2" (LF4125050) | |||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 3/4" (LF4571075) | 1" x 1" (LF4571010) |
| 1 1/4" x 1 1/4" (LF4571313) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Drop Ear Brass Elbow (PEX x FIP) |
|||
| 1/2" x 1/2" (LF4235050) | |||
|
ProPEX (LF) Brass Adapter (PEX x Copper) |
|||
| 3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) |
| 2" x 2" (LF4512020) | |||
|
ProPEX (LF) Brass Coupling (PEX x PEX) |
|||
| 1 1/2" x 1 1/2" (LF4541515) | 3/8" x 1/2" (LF4543850) | 1/2" x 1/2" (LF4545050) | 1/2" x 3/4" (LF4545075) |
| 3/4" x 3/4" (LF4547575) | 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" x 1" (LF4541310) |
| 1 1/4" x 1 1/4" (LF4541313) | 1 1/2" x 1 1/4" (LF4541513) | 2" x 1 1/2" (LF4542015) | |
|
ProPEX (LF) Brass Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | ||
|
ProPEX (LF) Brass Female Threaded Adapter(PEXxNPT) |
|||
| 1/2" x 3/4" (LF4575075) | 3/4" x 1" (LF4577510) | 1 1/2" x 1" (LF4571515) | 2" x 2" (LF4572020) |
|
ProPEX (LF) Brass Fitting Adapter (PEX x Copper) |
|||
| 3/4" x 1/2" (LF4507550) | 3/4" x 1" (LF4507510) | 1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) |
|
ProPEX (LF) Brass Male Threaded Adapter(PEX x NPT) |
|||
| 3/8" x 1/2" (LF4523850) | 1/2" x 3/4" (LF4525075) | 3/4" x 1" (LF4527510) | 1" x 3/4" (LF4521075) |
| 1 1/2" x 1 1/2" (LF4521515) | 2" x 2" (LF4522020) | ||
|
ProPEX (LF) Brass Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (LF4707550) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 1" x 1/2" (LF4701150) | 1" x 3/4" x 3/4" (LF4701775) |
| 1" x 1" x 3/4" (LF4701175) | 1" x 3/4" x 1" (LF4701751) | ||
|
ProPEX (LF) Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX (LF) Brass Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 3/4" x 3/4" x 3/4" (LF4707575) | 1" x 1" x 1" (LF4701010) | |
|
ProPEX (LF) Brass to PB Coupling (PEX x PB) |
|||
| 1/2" x 1/2" (LF4585050) | 3/4" x 3/4" (LF4587575) | ||
|
ProPEX (LF) Brass to PE Coupling (PEX x PE) |
|||
| 1" x 1" (LF4591010) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX (LF) Brass Swivel Faucet Adapter (PEXxNPSM) |
|||
| 1/2" x 1/2" (LF4655050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Elbow (MIP) |
|||
| 1/2" x 1/2" (LF4125050) | |||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 3/4" (LF4571075) | 1" x 1" (LF4571010) |
| 1 1/4" x 1 1/4" (LF4571313) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Drop Ear Brass Elbow (PEX x FIP) |
|||
| 1/2" x 1/2" (LF4235050) | |||
|
ProPEX (LF) Brass Adapter (PEX x Copper) |
|||
| 3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) |
| 2" x 2" (LF4512020) | |||
|
ProPEX (LF) Brass Coupling (PEX x PEX) |
|||
| 1/2" x 1/2" (LF4545050) | 1/2" x 3/4" (LF4545075) | 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) |
| 1 1/4" x 1" (LF4541310) | 1 1/4" x 1 1/4" (LF4541313) | 1 1/2" x 1 1/4" (LF4541513) | 1 1/2" x 1 1/2" (LF4541515) |
| 2" x 1 1/2" (LF4542015) | |||
|
ProPEX (LF) Brass Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | ||
|
ProPEX (LF) Brass Female Threaded Adapter(PEXxNPT) |
|||
| 1/2" x 3/4" (LF4575075) | 3/4" x 1" (LF4577510) | 1 1/2" x 1" (LF4571515) | 2" x 2" (LF4572020) |
|
ProPEX (LF) Brass Fitting Adapter (PEX x Copper) |
|||
| 3/4" x 1/2" (LF4507550) | 3/4" x 1" (LF4507510) | 1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) |
|
ProPEX (LF) Brass Male Threaded Adapter(PEX x NPT) |
|||
| 3/8" x 1/2" (LF4523850) | 1/2" x 3/4" (LF4525075) | 3/4" x 1" (LF4527510) | 1" x 3/4" (LF4521075) |
| 1 1/2" x 1 1/2" (LF4521515) | 2" x 2" (LF4522020) | ||
|
ProPEX (LF) Brass Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (LF4707550) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 1" x 1/2" (LF4701150) | 1" x 3/4" x 3/4" (LF4701775) |
| 1" x 1" x 3/4" (LF4701175) | 1" x 3/4" x 1" (LF4701751) | ||
|
ProPEX (LF) Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX (LF) Brass Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 3/4" x 3/4" x 3/4" (LF4707575) | 1" x 1" x 1" (LF4701010) | |
|
ProPEX (LF) Brass to PB Coupling (PEX x PB) |
|||
| 1/2" x 1/2" (LF4585050) | 3/4" x 3/4" (LF4587575) | ||
|
ProPEX (LF) Brass to PE Coupling (PEX x PB) |
|||
| 1" x 1" (LF4591010) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
|
ProPEX (LF) Brass Swivel Faucet Adapter (PEXxNPSM) |
|||
| 1/2" x 1/2" (LF4655050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Webster City, IA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
Coupling (PEX x PEX) |
|||
| 3/8" x 1/2" (Q4773850) | 5/8" x 5/8" (Q4776363) | ||
|
Couplings (Union) |
|||
| 3/8" (Q4773838) | 1/2" (Q4775050) | 3/4" (Q4777575) | 1" (Q4771010) |
|
Elbows (ProPEX x ProPEX) |
|||
| 1/2" x 1/2" (Q4760500) | 1" x 1" (Q4761000) | ||
|
Fittings (Plugs) |
|||
| 1/2" (Q4350500) | |||
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 1" x 1/2" (Q7751150) |
| 1" x 1" x 3/4" (Q7751175) | 1" x 3/4" x 1" (Q7751751) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Swivel Closet Adapter (ProPEX EP x Ballcock) |
|||
| 3/8" x 7/8" (Q4340375) | 1/2" x 7/8" (Q4340500) | ||
|
Swivel Elbow |
|||
| 1/2" x 1/2" (T4330500) | |||
|
Swivel Faucet Adapter |
|||
| 1/2" (Q4360500) | |||
|
Tees (ProPEX x ProPEX x ProPEX) |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 3/4" x 1/2" (Q4757550) | 3/4" x 3/4" x 5/8" (Q4757563) |
| 3/4" x 3/4" x 3/4" (Q4757575) | 1" x 1" x 3/4" (Q4751175) | 1" x 1" x 1" (Q4751010) | |
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
Coupling (PEX x PEX) |
|||
| 3/8" x 1/2" (Q4773850) | 5/8" x 5/8" (Q4776363) | ||
|
Couplings (Union) |
|||
| 3/8" (Q4773838) | 1/2" (Q4775050) | 3/4" (Q4777575) | 1" (Q4771010) |
|
Elbows (ProPEX x ProPEX) |
|||
| 1/2" x 1/2" (Q4760500) | 1" x 1" (Q4761000) | ||
|
Fittings (Plugs) |
|||
| 1/2" (Q4350500) | |||
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 1" x 1/2" (Q7751150) |
| 1" x 1" x 3/4" (Q7751175) | 1" x 3/4" x 1" (Q7751751) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Swivel Closet Adapter (ProPEX EP x Ballcock) |
|||
| 3/8" x 7/8" (Q4340375) | 1/2" x 7/8" (Q4340500) | ||
|
Swivel Elbow |
|||
| 1/2" x 1/2" (T4330500) | |||
|
Swivel Faucet Adapter |
|||
| 1/2" (Q4360500) | |||
|
Tees (ProPEX x ProPEX x ProPEX) |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 3/4" x 1/2" (Q4757550) | 3/4" x 3/4" x 5/8" (Q4757563) |
| 3/4" x 3/4" x 3/4" (Q4757575) | 1" x 1" x 3/4" (Q4751175) | 1" x 1" x 1" (Q4751010) | |
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Apple Valley, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Tubing* ^ ˘ § +++ [1] [G] |
PEX 5106 |
AquaPEX (Natural) |
ASTM F876/F877 |
| 1/4" - 3" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Pipe is uncoated.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ § +++ [2] [G] |
PEX 5206 |
AquaPEX (Blue, Red) |
ASTM F876/F877 |
| 1/2", 3/4", 1" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] Pipe has a blue or red coating.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ +++ [1] [G] |
PEX 5106 |
AquaPEX (Natural) |
CSA B137.5 |
| 1/4" - 3" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Pipe is uncoated.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ +++ [2] [G] |
PEX 5206 |
AquaPEX (Blue, Red) |
CSA B137.5 |
| 1/2", 3/4", 1" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] Pipe has a blue or red coating.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ § +++ [3] [G] |
PEX 5006 |
AquaPEX Plus |
ASTM F876/F877 |
| 1/2" - 2" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[3] Pipe has a blue, red, or white coating.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ § +++ [3] [G] |
PEX 5006 |
AquaPEX Plus |
CSA B137.5 |
| 1/2" - 2" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[3] Pipe has a blue, red, or white coating.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ § +++ [G] |
PEX 5006 |
hePEX |
ASTM F876/F877 |
| 5/16" | |||
| 3/8" | |||
| 1/2" | |||
| 5/8" | |||
| 3/4" | |||
| 1" | |||
| 1 1/4" | |||
| 1 1/2" | |||
| 2" | |||
| 2 1/2" | |||
| 3" | |||
| 3 1/2" | |||
| 4" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˘ +++ [G] |
PEX 5006 |
hePEX |
CSA B137.5 |
| 3/4" | |||
| 3/8" | |||
| 5/8" | |||
| 1 1/4" | |||
| 2" | |||
| 3 1/2" | |||
| 4" | |||
| 2 1/2" | |||
| 1 1/2" | |||
| 1" | |||
| 1/2" | |||
| 5/16" | |||
| 3" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Circle Pines, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
1" Branch Multiport |
|||
| 4 1/2" Outlet (Q2241050) | |||
|
1" Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261050) | |||
|
1" EP Branch Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101050) | 12 Outlets (1/2") (Q2121050) | ||
|
1" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101000) | |||
|
1" EP Branch Manifold Tee |
|||
| 7 Outlets (Q2271050) | |||
|
1" EP Branch Multi-Port Tee |
|||
| 7 outlets with mounting clips (Q2271051) | 8 outlets with mounting clips (Q2281051) | ||
|
1" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2250400) | 6 Loop (Q2250600) | 8 Loop (Q2250800) | 10 Loop (Q2251000) |
| 12 Loop (Q2251200) | |||
|
1" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2250438) | 6 Loop (Q2250638) | 8 Loop (Q2250838) | 10 Loop (Q2251038) |
| 12 Loop (Q2251238) | |||
|
1" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2210400) | 6 Loop (Q2210600) | 8 Loop (Q2210800) | 10 Loop (Q2211000) |
| 12 Loop (Q2211200) | |||
|
1" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2210438) | 6 Loop (Q2210638) | 8 Loop (Q2210838) | 10 Loop (Q2211038) |
| 12 Loop (Q2211238) | |||
|
1" w/ 1" ProPEX End x ProPEX Outlet |
|||
| 6 Outlet (1/2") (Q2261050) | |||
|
1" w/ two 1" ProPEX End x ProPEX Outlet |
|||
| 6 Outlet (1/2") (Q2261051) | |||
|
1" x 1" Flow Through Multiport |
|||
| 4 1/2" Outlet (Q2241051) | |||
|
1" x 1" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261051) | |||
|
1" x 3/4" F/T w/ ProPEX Outlet |
|||
| 4 Outlet (1/2") (Q2241057) | 6 Outlet (1/2") (Q2261057) | ||
|
1" x 3/4" Flow Through Multiport |
|||
| 3 1/2" Outlet (Q2231057) | |||
|
1" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2241057) | 6 Outlet (Q2261057) | ||
|
1" x 3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2240400) | 6 Loop (Q2240600) | 8 Loop (Q2240800) | 10 Loop (Q2241000) |
| 12 Loop (Q2241200) | |||
|
1" x 3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2240438) | 6 Loop (Q2240638) | 8 Loop (Q2240838) | 10 Loop (Q2241038) |
| 12 Loop (Q2241238) | |||
|
3/4" Branch Manifold |
|||
| 3 Outlet (Q2237550) | 6 Outlet (Q2267550) | ||
|
3/4" Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2247550) | |||
|
3/4" EP Branch Commercial Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2277550) | 8 Outlets (1/2") (Q2287550) | ||
|
3/4" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2077550) | 8 Outlets (1/2") (Q2087550) | ||
|
3/4" EP Branch Opposing Port Multi-port Tee |
|||
| 3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |
|
3/4" F/T w/ two 3/4" ProPEX End x ProPEX Outlet |
|||
| 3 Outlet (1/2") (Q2237557) | 4 Outlet (1/2") (Q2247557) | ||
|
3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2230400) | 6 Loop (Q2230600) | 8 Loop (Q2230800) | 10 Loop (Q2231000) |
| 12 Loop (Q2231200) | |||
|
3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2230438) | 6 Loop (Q2230638) | 8 Loop (Q2230838) | 10 Loop (Q2231038) |
| 12 Loop (Q2231238) | |||
|
3/4" ProPEX Flow Thru x ProPEX Outlet |
|||
| 4 Outlet (1/2") (Q2247557) | |||
|
3/4" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2200400) | 6 Loop (Q2200600) | 8 Loop (Q2200800) | 10 Loop (Q2201000) |
| 12 Loop (Q2201200) | |||
|
3/4" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2200438) | 6 Loop (Q2200638) | 8 Loop (Q2200838) | 10 Loop (Q2201038) |
| 12 Loop (Q2201238) | |||
|
3/4" ProPEX w/ two 3/4" ProPEX End x ProPEX Outlet |
|||
| 2 Outlet (1/2") (Q2227557) | |||
|
3/4" x 3/4" EP Flow-thru Opp. Port Multi-port Tee |
|||
| 3 Outlets (1/2") (Q2337557) | 4 Outlets (1/2") (Q2347557) | 6 Outlets (1/2") (Q2367557) | |
|
3/4" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 2 Outlet (Q2227557) | 3 Outlet (Q2237557) | 4 Outlet (Q2247557) | |
|
3/4" x 3/4" ProPEX Flow thru Manifold |
|||
| 6 Outlet (Q2267557) | |||
|
Branch Manifold |
|||
| 3/4" 6 Outlet (Q2267550) | |||
|
EP F/T Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 3 Outlet (Q2235577) | |||
|
EP F/T Multi-Port Tee Q&E/ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2247577) | |||
|
EP F/T Roll-out Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2245577) | |||
|
EP F/T Roll-out Multi-Port Horizontal Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 4 Outlet (Q2247577) | |||
|
EP F/T Roll-out Multi-Port Vertical Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 3 Outlet (Q2237757) | 3/4" x 3/4" x 3/4" 4 Outlet (Q2247757) | ||
|
ProPEX Flow through Manifold |
|||
| 3/4" x 3/4" 6 Outlet (Q2267557) | |||
|
ľ"xľ"x1", EP Flow-Through Multi-Port Vertical Tee |
|||
| 4 Outlets (Q2247710) | |||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
Aquacenter Valved |
|||
| 3 Outlet (1/2" NPSM) (Q2100300) | 3 Outlet (1/2" ProPEX) (Q2110300) | 4 Outlet (1/2" NPSM) (Q2100400) | 4 Outlet (1/2" ProPEX) (Q2110400) |
| 3/8" Swivel Adapter (Q2120375)[1] | 1/2" Swivel Adapter (Q4360500)[1] | 3/4" Inlet (Q2120750)[1] | 1" Inlet (Q2121000)[1] |
| Coupler (Q2121313)[1] | Coupler Plug (Q2121251)[1] | End Cap (Q2121250)[1] | |
[1] Components are part of the manifold kit. ! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Couplings |
|||
| 1/2" x 1/2" (Q4775050) | 1/2" x 3/4" (Q4775075) | 3/4" x 1" (Q4777510) | |
|
EP Reducing Tee |
|||
| 1 1/4" x 1 1/4" (Q4751350) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 1 1/2" x 2" (Q4752152) |
| 2" x 2" x 1/2" (Q4752250) | |||
|
Elbows |
|||
| 3/4" (Q4760750) | 1/2" (Q4760500) | 1" (Q4761000) | 1 1/4" (Q4711250) |
| 1 1/2" (Q4711500) | |||
|
Plugs |
|||
| 3/8" (Q4350375) | 1/2" (Q4350500) | 3/4" (Q4350750) | 1" (Q4351000) |
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Fire Sprinkler Tee |
|||
| 3/4" x 3/4" 3/4" (FS4757575) | 3/4" x 3/4" x 1" (FS4757710) | 1" x 1" x 3/4" (FS4751175) | 1" x 1" x 1" (FS4751010) |
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 3/4" x 1" (Q7751751) |
| 1" x 1" x 1/2" (Q7751150) | 1" x 1" x 3/4" (Q7751175) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Tees |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 1/2" x 1/2" x 3/4" (Q4755575) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 1/2" x 3/4" (Q4757557) |
| 3/4" x 3/4" x 3/4" (Q4757575) | 3/4" x 3/4" x 1" (Q4757710) | 1" x 3/4" x 3/4" (Q4751775) | 1" x 3/4" x 1" (Q4751751) |
| 1" x 1" x 1/2" (Q4751150) | 1" x 1" x 3/4" (Q4751175) | 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) |
| 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) | 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) | 1 1/2" x 1" x 3/4" (Q4751517) |
| 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) | 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) |
| 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | |||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
1" Branch Multiport |
|||
| 4 1/2" Outlet (Q2241050) | |||
|
1" Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261050) | |||
|
1" EP Branch Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101050) | 12 Outlets (1/2") (Q2121050) | ||
|
1" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101000) | |||
|
1" EP Branch Manifold Tee |
|||
| 7 Outlets (Q2271050) | |||
|
1" EP Branch Multi-Port Tee |
|||
| 7 outlets with mounting clips (Q2271051) | 8 outlets with mounting clips (Q2281051) | ||
|
1" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2250400) | 6 Loop (Q2250600) | 8 Loop (Q2250800) | 10 Loop (Q2251000) |
| 12 Loop (Q2251200) | |||
|
1" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2250438) | 6 Loop (Q2250638) | 8 Loop (Q2250838) | 10 Loop (Q2251038) |
| 12 Loop (Q2251238) | |||
|
1" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2210400) | 6 Loop (Q2210600) | 8 Loop (Q2210800) | 10 Loop (Q2211000) |
| 12 Loop (Q2211200) | |||
|
1" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2210438) | 6 Loop (Q2210638) | 8 Loop (Q2210838) | 10 Loop (Q2211038) |
| 12 Loop (Q2211238) | |||
|
1" x 1" Flow Through Multiport |
|||
| 4 1/2" Outlet (Q2241051) | |||
|
1" x 1" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261051) | |||
|
1" x 3/4" Flow Through Multiport |
|||
| 3 1/2" Outlet (Q2231057) | |||
|
1" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2241057) | 6 Outlet (Q2261057) | ||
|
1" x 3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2240400) | 6 Loop (Q2240600) | 8 Loop (Q2240800) | 10 Loop (Q2241000) |
| 12 Loop (Q2241200) | |||
|
1" x 3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2240438) | 6 Loop (Q2240638) | 8 Loop (Q2240838) | 10 Loop (Q2241038) |
| 12 Loop (Q2241238) | |||
|
3/4" Branch Manifold |
|||
| 3 Outlet (Q2237550) | 6 Outlet (Q2267550) | ||
|
3/4" Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2247550) | |||
|
3/4" EP Branch Commerical Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2277550) | 8 Outlets (1/2") (Q2287550) | ||
|
3/4" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2077550) | 8 Outlets (1/2") (Q2087550) | ||
|
3/4" EP Branch Opposing Port Multi-port Tee |
|||
| 3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |
|
3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2230400) | 6 Loop (Q2230600) | 8 Loop (Q2230800) | 10 Loop (Q2231000) |
| 12 Loop (Q2231200) | |||
|
3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q42230438) | 6 Loop (Q2230638) | 8 Loop (Q2230838) | 10 Loop (Q2231038) |
| 12 Loop (Q2231238) | |||
|
3/4" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2202400) | 6 Loop (Q2200600) | 8 Loop (Q2200800) | 10 Loop (Q2201000) |
| 12 Loop (Q2201200) | |||
|
3/4" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2200438) | 6 Loop (Q2200638) | 8 Loop (Q2200838) | 10 Loop (Q2201038) |
| 12 Loop (Q2201238) | |||
|
3/4" x 3/4" EP Flow-thru Opp. Port Multi-port Tee |
|||
| 3 outlets (1/2") (Q2337557) | 4 outlets (1/2") (Q2347557) | 6 outlets (1/2") (Q2367557) | |
|
3/4" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 2 Outlet (Q2227557) | 3 Outlet (Q2237557) | 4 Outlet (Q2247557) | |
|
3/4" x 3/4" ProPex Flow thru Manifold |
|||
| 6 Outlet (Q2267557) | |||
|
Branch Manifold |
|||
| 3/4" 6 Outlet (Q2267550) | |||
|
EP F/T Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 3 Outlet (Q2235577) | |||
|
EP F/T Multi-Port Tee Q&E/ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2247557) | |||
|
EP F/T Roll-out Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2245577) | |||
|
EP F/T Roll-out Multi-Port Horizontal Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 4 Outlet (Q2247577) | |||
|
EP F/T Roll-out Multi-Port Vertical Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 3 Outlet (Q2237757) | 3/4" x 3/4" x 3/4" 4 Outlet (Q2247757) | ||
|
ProPEX Flow through Manifold |
|||
| 3/4" x 3/4" 6 Outlet (Q2267557) | |||
|
ľ"xľ"x1", EP Flow-Through Multi-Port Vertical Tee |
|||
| 4 Outlets (Q2247710) | |||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
Aquacenter Valved |
|||
| 3 Outlet (1/2" NPSM) (Q2100300) | 3 Outlet (1/2" ProPEX) (Q2110300) | 4 Outlet (1/2" NPSM) (Q2100400) | 4 Outlet (1/2" ProPEX) (Q2110400) |
| 3/8" Swivel Adapter (Q2120375)[1] | 1/2" Swivel Adapter (Q4360500)[1] | 3/4" Inlet (Q2120750)[1] | 1" Inlet (Q2121000)[1] |
| Coupler (Q2121313)[1] | Coupler Plug (Q2121251)[1] | End Cap (Q2121250)[1] | |
[1] Components are part of the manifold kit. ! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Couplings |
|||
| 1/2" x 1/2" (Q4775050) | 1/2" x 3/4" (Q4775075) | 3/4" x 1" (Q477510) | |
|
EP Reducing Tee |
|||
| 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 1 1/2" x 2" (Q4752152) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/4" x 1 1/4" x 1/2" (Q4751350) |
| 2" x 2" x 1/2" (Q4752250) | |||
|
Elbows |
|||
| 3/4" (Q4760750) | 1/2" (Q4760500) | 1" (Q4761000) | 1 1/4" (Q4711250) |
| 1 1/2" (Q4711500) | |||
|
Plugs |
|||
| 3/8" (Q43550375) | 1/2" (Q4350500) | 3/4" (Q4350750) | 1" (Q4351000) |
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Fire Sprinkler Tee |
|||
| 3/4" x 3/4" 3/4" (FS4757575) | 3/4" x 3/4" x 1" (FS4757710) | 1" x 1" x 3/4" (FS4751175) | 1" x 1" x 1" (FS4751010) |
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 3/4" x 1" (Q7751751) |
| 1" x 1" x 1/2" (Q7751150) | 1" x 1" x 3/4" (Q7751175) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Tees |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 1/2" x 3/4" (Q4757557) | 3/4" x 3/4" x 3/4" (Q4757575) |
| 1" x 3/4" x 3/4" (Q4751775) | 1" x 3/4" x 1" (Q4751751) | 1" x 1" x 1/2" (Q4751150) | 1 1/4" x 1" x 3/4" (Q4751317) |
| 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) | 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) |
| 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) |
| 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | ||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valve! ˘ § ++ [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASTM F1960 |
|
ProPEX EP Inline Valve (PEX x PEX) |
|||
| 3/4" x 3/4" (Q4837575) | 1/2" x 1/2" (Q4905050) | ||
! Product may or may not bear the NSF U.P. Code marking. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valve! # + ˘ § [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASTM F1960 |
| ProPEX EP Angle Stop Valve 1/2" (Q4905038) | |||
| ProPEX EP Straight Stop Valve 1/2" (Q4935038) | |||
! Product may or may not bear the NSF U.P. Code marking. # Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valve! ˘ § ++ [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX EP Inline Valve (PEX x PEX) |
|||
| 1/2" x 1/2" (Q4905050) | |||
! Product may or may not bear the NSF U.P. Code marking. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valve! # + ˘ § [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASME A112.18.1/CSA B125.1 |
| ProPEX EP Angle Stop Valve 1/2" (Q4905038) | |||
| ProPEX EP Straight Stop Valve 1/2" (Q4935038) | |||
! Product may or may not bear the NSF U.P. Code marking. # Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valve! ˘ § ++ [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
CSA B125.3 |
|
ProPEX EP Inline Valve (PEX x PEX) |
|||
| 3/4" x 3/4" (Q4837575) | |||
! Product may or may not bear the NSF U.P. Code marking. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Lakeville, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings! ˘ § [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Coupling |
|||
| 1/2" x 1/2" (Q4775050) | 1 1/4" x 3/4" (Q4771307) | 1 1/4" x 1 1/4" (Q4771313) | 1 1/2" x 3/4" (Q4771507) |
| 1 1/2" x 1" (Q4771510) | 1 1/2" x 1 1/4" (Q4771513) | 1 1/2" x 1 1/2" (Q4771515) | 2" (Q4772020) |
| 2" x 1 1/2" (Q4772015) | |||
|
EP Reducing Tee |
|||
| 1 1/4" x 1 1/4" x 1/2" (Q4751350) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 1 1/2" x 2" (Q4752152) |
| 2" x 2" 1/2" (Q4752250) | |||
|
Elbows |
|||
| 3/4" x 3/4" (Q4760750) | 1 1/4" x 1 1/4" (Q4761250) | 1 1/2" x 1 1/2" (Q4761500) | 2" x 2" (Q4762000) |
| 2" x 2" (Q4762245) | |||
|
Plugs |
|||
| 1/2" (Q4350500) | 1 1/4" (Q4351250) | 1 1/2" (Q4351500) | 2" (Q4352000) |
|
Tees |
|||
| 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) |
| 1 1/2" x 1 1/4" x 3/4" (Q4751537) | 1 1/2" x 1 1/4" x 1" (Q4751531) | 1 1/2" x 1 1/4" x 1 1/4" (Q4751533) | 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) |
| 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) |
| 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | 2" x 1 1/2" x 3/4" (Q4752575) | 2" x 1 1/2" x 1" (Q4752051) |
| 2" x 1 1/2" x 1 1/4" (Q4752053) | 2" x 1 1/2" x 1 1/2" (Q4752055) | 2" x 2" x 3/4" (Q4752275) | 2" x 2" x 1" (Q4752210) |
| 2" x 2" x 1 1/4" (Q4752213) | 2" x 2" x 1 1/2" (Q4752215) | 2" x 2" x 2" (Q4752000) | |
! Product may or may not bear the NSF U.P. Code marking. * PLS - Polysulfone ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings! ˘ § [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Coupling |
|||
| 1/2" x 1/2" (Q4775050) | 1 1/4" x 3/4" (Q4771307) | 1 1/4" x 1" (Q4771310) | 1 1/4" x 1 1/4" (Q4771313) |
| 1 1/2" x 3/4" (Q4771507) | 1 1/2" x 1" (Q4771510) | 1 1/2" x 1 1/4" (Q4771513) | 1 1/2" x 1 1/2" (Q4771515) |
| 2" (Q4772020) | 2" x 1 1/2" (Q4772015) | 2" x 2" (Q4772020) | |
|
EP Reducing Tee |
|||
| 1 1/4" x 1 1/4" x 1/2" (Q4751350) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 2" x 1/2" (Q4752250) |
| 2" x 1 1/2" x 2" (Q4752152) | |||
|
Elbows |
|||
| 3/4" x 3/4" (Q4760750) | 1 1/4" x 1 1/4" (Q4761250) | 1 1/2" x 1 1/2" (Q4761500) | 2" x 2" (Q4762000) |
| 2" x 2" (Q4762245) | |||
|
Plugs |
|||
| 1/2" (Q4350500) | 1 1/4" (Q4351250) | 1 1/2" (Q4351500) | 2" (Q4352000) |
|
Tees |
|||
| 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) |
| 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) | 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/4" x 3/4" (Q4751537) |
| 1 1/2" x 1 1/4" x 1" (Q4751531) | 1 1/2" x 1 1/4" x 1 1/4" (Q4751533) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) |
| 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | 2" x 1 1/2" x 3/4" (Q4752575) | 2" x 1 1/2" x 1" (Q4752051) |
| 2" x 1 1/2" x 1 1/4" (Q4752053) | 2" x 1 1/2" x 1 1/2" (Q4752055) | 2" x 2" x 3/4" (Q4752275) | 2" x 2" x 1" (Q4752210) |
| 2" x 2" x 1 1/4" (Q4752213) | 2" x 2" x 1 1/2" (Q4752215) | 2" x 2" x 2" (Q4752000) | |
! Product may or may not bear the NSF U.P. Code marking. * PLS - Polysulfone ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Middlefield, OH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Riser Tubing* +++ [G] |
PEX |
AquaPEX |
ASME A112.18.6/CSA B125.6 |
|
3/8" O.D. x 12" Closet Riser |
|||
| F1082512 | |||
|
3/8" O.D. x 12" Lav Riser |
|||
| F1072512 | |||
|
3/8" O.D. x 20" Closet Riser |
|||
| F1082520 | |||
|
3/8" O.D. x 20" Lav Riser |
|||
| F1072520 | |||
|
3/8" O.D. x 30" Lav Riser |
|||
| F1072530 | |||
|
3/8" O.D. x 36" Lav Riser |
|||
| F1072536 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Liberty, SC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ ˘ § [G] |
MLTPL |
ProPEX |
ASTM F1960 |
| 1/2" ProPEX 4-Port Fitting | |||
|
ProPEX Fire Sprinkler Adapter Tee |
|||
| 3/4" PEX x 3/4" PEX x 3/4" PEX x 1/2 FNPT (Q7527575) | 1" PEX x 1" PEX x 1/2" FNPT (Q7521010) | ||
|
ProPEX Fire Sprinkler Adapter Left Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7547550) | 1" PEX x 1/2" FNPT (Q7541050) | ||
|
ProPEX Fire Sprinkler Adapter Right Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7537550) | 1" PEX x 1/2" FNPT (Q7531050) | ||
|
ProPEX Fire Sprinkler Adapter |
|||
| 3/4" PEX x 1/2" FNPT (Q7517550) | 1" PEX x 1/2" FNPT (Q7511050) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings+ ˘ § [G] |
MLTPL |
ProPEX |
CSA B137.5 |
| 1/2" ProPEX 4-Port Fitting | |||
|
ProPEX Fire Sprinkler Adapter Tee |
|||
| 3/4" PEX x 3/4" PEX x 3/4" PEX x 1/2 FNPT (Q7527575) | 1" PEX x 1" PEX x 1/2" FNPT (Q7521010) | ||
|
ProPEX Fire Sprinkler Adapter Left Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7547550) | 1" PEX x 1/2" FNPT (Q7541050) | ||
|
ProPEX Fire Sprinkler Adapter Right Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7537550) | 1" PEX x 1/2" FNPT (Q7531050) | ||
|
ProPEX Fire Sprinkler Adapter |
|||
| 3/4" PEX x 1/2" FNPT (Q7517550) | 1" PEX x 1/2" FNPT (Q7511050) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Facility : Brecia, Italy
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | 1 1/4" x 1 1/4" (LF4571313) |
| 2" x 2" (LF4572020) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
| 2" x 2" (LF4522020) | |||
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Fire Sprinkler/ProPEX Brass Tee |
|||
| 3/4" PEX x 3/4" PEX x 1/2" FNPT (LF7707575) | 1" PEX x 1" PEX x 1/2" FNPT (LF7701010) | ||
|
ProPEX (LF) Brass Elbow |
|||
| 1/2" PEX x 1/2" MIP (LF4125050) | 1/2" PEX x 1/2" PEX (LF4710500) | 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) |
| 1 1/4" PEX x 1 1/4" PEX (LF4711250) | 1 1/2" PEX x 1 1/2" PEX (LF4711500) | ||
|
ProPEX (LF) Brass Plug |
|||
| 3/8" PEX (LF4533838) | |||
|
ProPEX (LF) Brass to PE Coupling |
|||
| 1/2" PEX x 1/2" PE (LF4585050) | 3/4" PEX x 3/4" PE (3/4" PEX x 3/4" PB) | 1" PEX x 1" PE (LF4591010) | |
|
ProPEX Drop Ear (LF) Brass Elbow |
|||
| 1/2" PEX x 3/8" FIP (LF4235038) | 1/2" PEX x 1/2" FIP (LF4235050) | 3/4" PEX x 3/4" FIP (LF4237575) | 1" PEX x 1" FIP (LF4231010) |
|
ProPEX LF Brass Coupling |
|||
| 3/8" PEX x 1/2" PEX (LF4543850) | 1/2" PEX x 1/2" PEX (LF4545050) | 1/2" PEX x 3/4" PEX (LF4545075) | 3/4" x 3/4" (LF4547575) |
| 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" PEX x 1" PEX (LF4541310) | 1 1/4" PEX x 1 1/4" PEX (LF4541313) |
| 1 1/2" PEX x 1 1/4" PEX (LF4541513) | 1 1/2" PEX x 1 1/2" PEX (LF4541515) | 2" PEX x 1 1/2" PEX (LF4542015) | |
|
ProPEX LF Brass Female Threaded Adapter |
|||
| 1" PEX x 3/4" NPT (LF4571075) | |||
|
ProPEX LF Brass Reducing Tee |
|||
| 1/2" PEX x 1/2" PEX x 3/4" PEX (LF4705575) | 3/4" PEX x 1/2" PEX x 1/2" PEX (LF4707555) | 3/4" PEX x 1/2" PEX x 3/4" PEX (LF4707557) | 3/4" x 3/4" x 1/2" (LF4707550) |
| 3/4" x 3/4" x 3/4" (LF4707575) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 3/4" x 3/4" (LF4701775) | 1" x 3/4" x 1" (LF4701751) |
| 1" x 1" x 1/2" (LF4701150) | 1" x 1" x 3/4" (LF4701175) | 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (LF4701337) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (LF4701557) |
| 1 1/2" PEX x 1 1/2" PEX x 1" PEX (LF4701551) | |||
|
ProPEX LF Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX LF Brass Tee |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 1/2" Copper x 1/2" Copper x 1/2" Female NPT (LF4705125) | 1" x 1" x 1" (LF4701010) | |
|
Q&E/ProPEX Brass FS Elbow |
|||
| 3/4" PEX x 1/2" FNPT (LF7711050) | 3/4" PEX x 1/2" FNPT (LF7717550) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | 1 1/4" x 1 1/4" (LF4571313) |
| 2" x 2" (LF4572020) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
| 2" x 2" (LF4522020) | |||
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Fire Sprinkler/ProPEX Brass Tee |
|||
| 3/4" PEX x 3/4" PEX x 1/2" FNPT (LF7707575) | 1" PEX x 1" PEX x 1/2" FNPT (LF7701010) | ||
|
ProPEX (LF) Brass Elbow |
|||
| 1/2" PEX x 1/2" MIP (LF4125050) | 1/2" PEX x 1/2" PEX (LF4710500) | 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) |
| 1 1/4" PEX x 1 1/4" PEX (LF4711250) | 1 1/2" PEX x 1 1/2" PEX (LF4711500) | ||
|
ProPEX (LF) Brass Plug |
|||
| 3/8" PEX (LF4533838) | |||
|
ProPEX (LF) Brass to PE Coupling |
|||
| 1/2" PEX x 1/2" PE (LF4585050) | 3/4" PEX x 3/4" PE (LF4587575) | 1" PEX x 1" PE (LF4591010) | |
|
ProPEX Drop Ear (LF) Brass Elbow |
|||
| 1/2" PEX x 3/8" FIP (LF4235038) | 1/2" PEX x 1/2" FIP (LF4235050) | 3/4" PEX x 3/4" FIP (LF4237575) | 1" PEX x 1" FIP (LF4231010) |
|
ProPEX LF Brass Coupling |
|||
| 3/8" PEX x 1/2" PEX (LF4543850) | 1/2" PEX x 1/2" PEX (LF4545050) | 1/2" PEX x 3/4" PEX (LF4545075) | 3/4" x 3/4" (LF4547575) |
| 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" PEX x 1" PEX (LF4541310) | 1 1/4" PEX x 1 1/4" PEX (LF4541313) |
| 1 1/2" PEX x 1 1/4" PEX (LF4541513) | 1 1/2" PEX x 1 1/2" PEX (LF4541515) | 2" PEX x 1 1/2" PEX (LF4542015) | |
|
ProPEX LF Brass Female Threaded Adapter |
|||
| 1" PEX x 3/4" NPT (LF4571075) | |||
|
ProPEX LF Brass Reducing Tee |
|||
| 1/2" PEX x 1/2" PEX x 3/4" PEX (LF4705575) | 3/4" PEX x 1/2" PEX x 1/2" PEX (LF4707555) | 3/4" PEX x 1/2" PEX x 3/4" PEX (LF4707557) | 3/4" x 3/4" x 1/2" (LF4707550) |
| 3/4" x 3/4" x 3/4" (LF4707575) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 3/4" x 3/4" (LF4701775) | 1" x 3/4" x 1" (1" x 3/4" x 1") |
| 1" x 1" x 1/2" (LF4701150) | 1" x 1" x 3/4" (LF4701175) | 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (LF4701337) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (LF4701557) |
| 1 1/2" PEX x 1 1/2" PEX x 1" PEX (LF4701551) | |||
|
ProPEX LF Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX LF Brass Tee |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 1/2" Copper x 1/2" Copper x 1/2" Female NPT (LF4705125) | 1" x 1" x 1" (LF4701010) | |
|
Q&E/ProPEX Brass FS Elbow |
|||
| 3/4" PEX x 1/2" FNPT (LF7711050) | 3/4" PEX x 1/2" FNPT (LF7717550) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 1/2" MIP (LF4795050) | 1/2” PEX x 3/4” NH (LF4885075) | 1/2” PEX x 3/4” NH (LF4895075) | |
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 3/8" PEX x 1/2" Copper Adapter (LF4803850) | 1/2" PEX x 1/2" PEX (LF4815050) | 1/2" PEX x 1/2" Copper Adapter (LF4805050) | 3/4" PEX x 3/4" PEX (LF4817575) |
| 3/4" PEX x 3/4" Copper Adapter (LF4807575) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
Compression Angle Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4410500) | |||
|
Compression Straight Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4220500) | |||
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
|
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||
| 1/2" PEX (LF4865038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 1/2" MIP (LF4795050) | |||
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 1/2" PEX x 1/2" Copper Adapter (LF4805050) | 1/2" PEX x 1/2" PEX (LF4815050) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
Compression Angle Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4410500) | |||
|
Compression Straight Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4220500) | |||
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
|
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||
| 1/2" PEX (LF4865038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX LF Brass Ball Valve Full Port |
|||
| 3/4" PEX x 3/4" PEX (LF4827575) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
LF Brass Ball Valve |
|||
| 1/2" PEX x 1/4" Compression (LF4838811) | |||
|
ProPEX LF Brass Inline Ice Maker Tee |
|||
| 1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
LF Brass Ball Valve |
|||
| 1/2" PEX x 1/4" Compression (LF4838811) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B125.3 |
|
ProPEX LF Brass Ball Valve Full Port |
|||
| 3/4" PEX x 3/4" PEX (LF4827575) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B125.3 |
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 3/4" PEX x 3/4" PEX (LF4817575) | 3/4" PEX x 3/4" Copper Adapter (LF4807575) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 3/4" NH (LF4885075) | 1/2" PEX x 3/4" NH (LF4895075) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve (Large Bore) |
|||
| 3/8" PEX x 1/2" Copper Adapter (LF4803850) | |||
|
ProPEX LF Brass Inline Ice Maker Tee |
|||
| 1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX LF Brass Ball Valve Full Port |
|||
| 1" PEX x 1" PEX (LF4821010) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 850
Processing time was 1 seconds