These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=50820&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Uponor | |
| 5925 148th Street West | |
| Apple Valley, MN 55124 | |
| United States | |
| 800-321-4739 | |
| 952-891-2000 |
Facility : Frankfort, IL
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Elbow (MIP) |
|||
| 1/2" x 1/2" (LF4125050) | |||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 3/4" (LF4571075) | 1" x 1" (LF4571010) |
| 1 1/4" x 1 1/4" (LF4571313) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Drop Ear Brass Elbow (PEX x FIP) |
|||
| 1/2" x 1/2" (LF4235050) | |||
|
ProPEX (LF) Brass Adapter (PEX x Copper) |
|||
| 3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) |
| 2" x 2" (LF4512020) | |||
|
ProPEX (LF) Brass Coupling (PEX x PEX) |
|||
| 3/8" x 1/2" (LF4543850) | 1 1/2" x 1 1/2" (LF4541515) | 1/2" x 1/2" (LF4545050) | 1/2" x 3/4" (LF4545075) |
| 3/4" x 3/4" (LF4547575) | 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" x 1" (LF4541310) |
| 1 1/4" x 1 1/4" (LF4541313) | 1 1/2" x 1 1/4" (LF4541513) | 2" x 1 1/2" (LF4542015) | |
|
ProPEX (LF) Brass Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | ||
|
ProPEX (LF) Brass Female Threaded Adapter(PEXxNPT) |
|||
| 1/2" x 3/4" (LF4575075) | 3/4" x 1" (LF4577510) | 1 1/2" x 1" (LF4571515) | 2" x 2" (LF4572020) |
|
ProPEX (LF) Brass Fitting Adapter (PEX x Copper) |
|||
| 3/4" x 1/2" (LF4507550) | 3/4" x 1" (LF4507510) | 1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) |
|
ProPEX (LF) Brass Male Threaded Adapter(PEX x NPT) |
|||
| 3/8" x 1/2" (LF4523850) | 1/2" x 3/4" (LF4525075) | 3/4" x 1" (LF4527510) | 1" x 3/4" (LF4521075) |
| 1 1/2" x 1 1/2" (LF4521515) | 2" x 2" (LF4522020) | ||
|
ProPEX (LF) Brass Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (LF4707550) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 1" x 1/2" (LF4701150) | 1" x 3/4" x 3/4" (LF4701775) |
| 1" x 1" x 3/4" (LF4701175) | 1" x 3/4" x 1" (LF4701751) | ||
|
ProPEX (LF) Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX (LF) Brass Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 3/4" x 3/4" x 3/4" (LF4707575) | 1" x 1" x 1" (LF4701010) | |
|
ProPEX (LF) Brass to PB Coupling (PEX x PB) |
|||
| 1/2" x 1/2" (LF4585050) | 3/4" x 3/4" (LF4587575) | ||
|
ProPEX (LF) Brass to PE Coupling (PEX x PE) |
|||
| 1" x 1" (LF4591010) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX (LF) Brass Swivel Faucet Adapter (PEXxNPSM) |
|||
| 1/2" x 1/2" (LF4655050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Elbow (MIP) |
|||
| 1/2" x 1/2" (LF4125050) | |||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 3/4" (LF4571075) | 1" x 1" (LF4571010) |
| 1 1/4" x 1 1/4" (LF4571313) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Drop Ear Brass Elbow (PEX x FIP) |
|||
| 1/2" x 1/2" (LF4235050) | |||
|
ProPEX (LF) Brass Adapter (PEX x Copper) |
|||
| 3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) |
| 2" x 2" (LF4512020) | |||
|
ProPEX (LF) Brass Coupling (PEX x PEX) |
|||
| 1/2" x 1/2" (LF4545050) | 1/2" x 3/4" (LF4545075) | 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) |
| 1 1/4" x 1" (LF4541310) | 1 1/4" x 1 1/4" (LF4541313) | 1 1/2" x 1 1/4" (LF4541513) | 1 1/2" x 1 1/2" (LF4541515) |
| 2" x 1 1/2" (LF4542015) | |||
|
ProPEX (LF) Brass Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | ||
|
ProPEX (LF) Brass Female Threaded Adapter(PEXxNPT) |
|||
| 1/2" x 3/4" (LF4575075) | 3/4" x 1" (LF4577510) | 1 1/2" x 1" (LF4571515) | 2" x 2" (LF4572020) |
|
ProPEX (LF) Brass Fitting Adapter (PEX x Copper) |
|||
| 3/4" x 1/2" (LF4507550) | 3/4" x 1" (LF4507510) | 1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) |
|
ProPEX (LF) Brass Male Threaded Adapter(PEX x NPT) |
|||
| 3/8" x 1/2" (LF4523850) | 1/2" x 3/4" (LF4525075) | 3/4" x 1" (LF4527510) | 1" x 3/4" (LF4521075) |
| 1 1/2" x 1 1/2" (LF4521515) | 2" x 2" (LF4522020) | ||
|
ProPEX (LF) Brass Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (LF4707550) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 1" x 1/2" (LF4701150) | 1" x 3/4" x 3/4" (LF4701775) |
| 1" x 1" x 3/4" (LF4701175) | 1" x 3/4" x 1" (LF4701751) | ||
|
ProPEX (LF) Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX (LF) Brass Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 3/4" x 3/4" x 3/4" (LF4707575) | 1" x 1" x 1" (LF4701010) | |
|
ProPEX (LF) Brass to PB Coupling (PEX x PB) |
|||
| 1/2" x 1/2" (LF4585050) | 3/4" x 3/4" (LF4587575) | ||
|
ProPEX (LF) Brass to PE Coupling (PEX x PB) |
|||
| 1" x 1" (LF4591010) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
|
ProPEX (LF) Brass Swivel Faucet Adapter (PEXxNPSM) |
|||
| 1/2" x 1/2" (LF4655050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Webster City, IA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
Coupling (PEX x PEX) |
|||
| 3/8" x 1/2" (Q4773850) | 5/8" x 5/8" (Q4776363) | ||
|
Couplings (Union) |
|||
| 3/8" (Q4773838) | 1/2" (Q4775050) | 3/4" (Q4777575) | 1" (Q4771010) |
|
Elbows (ProPEX x ProPEX) |
|||
| 1/2" x 1/2" (Q4760500) | 1" x 1" (Q4761000) | ||
|
Fittings (Plugs) |
|||
| 1/2" (Q4350500) | |||
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 1" x 1/2" (Q7751150) |
| 1" x 1" x 3/4" (Q7751175) | 1" x 3/4" x 1" (Q7751751) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Swivel Closet Adapter (ProPEX EP x Ballcock) |
|||
| 3/8" x 7/8" (Q4340375) | 1/2" x 7/8" (Q4340500) | ||
|
Swivel Elbow |
|||
| 1/2" x 1/2" (T4330500) | |||
|
Swivel Faucet Adapter |
|||
| 1/2" (Q4360500) | |||
|
Tees (ProPEX x ProPEX x ProPEX) |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 3/4" x 1/2" (Q4757550) | 3/4" x 3/4" x 5/8" (Q4757563) |
| 3/4" x 3/4" x 3/4" (Q4757575) | 1" x 1" x 3/4" (Q4751175) | 1" x 1" x 1" (Q4751010) | |
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
Coupling (PEX x PEX) |
|||
| 3/8" x 1/2" (Q4773850) | 5/8" x 5/8" (Q4776363) | ||
|
Couplings (Union) |
|||
| 3/8" (Q4773838) | 1/2" (Q4775050) | 3/4" (Q4777575) | 1" (Q4771010) |
|
Elbows (ProPEX x ProPEX) |
|||
| 1/2" x 1/2" (Q4760500) | 1" x 1" (Q4761000) | ||
|
Fittings (Plugs) |
|||
| 1/2" (Q4350500) | |||
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 1" x 1/2" (Q7751150) |
| 1" x 1" x 3/4" (Q7751175) | 1" x 3/4" x 1" (Q7751751) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Swivel Closet Adapter (ProPEX EP x Ballcock) |
|||
| 3/8" x 7/8" (Q4340375) | 1/2" x 7/8" (Q4340500) | ||
|
Swivel Elbow |
|||
| 1/2" x 1/2" (T4330500) | |||
|
Swivel Faucet Adapter |
|||
| 1/2" (Q4360500) | |||
|
Tees (ProPEX x ProPEX x ProPEX) |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 3/4" x 1/2" (Q4757550) | 3/4" x 3/4" x 5/8" (Q4757563) |
| 3/4" x 3/4" x 3/4" (Q4757575) | 1" x 1" x 3/4" (Q4751175) | 1" x 1" x 1" (Q4751010) | |
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Apple Valley, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Tubing* ^ ˘ § +++ [1] [G] |
PEX 5106 |
AquaPEX (Natural) |
ASTM F876/F877 |
| 1/4" - 3" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Pipe is uncoated.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ § +++ [2] [G] |
PEX 5206 |
AquaPEX (Blue, Red) |
ASTM F876/F877 |
| 1/2", 3/4", 1" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] Pipe has a blue or red coating.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ +++ [1] [G] |
PEX 5106 |
AquaPEX (Natural) |
CSA B137.5 |
| 1/4" - 3" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Pipe is uncoated.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ +++ [2] [G] |
PEX 5206 |
AquaPEX (Blue, Red) |
CSA B137.5 |
| 1/2", 3/4", 1" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] Pipe has a blue or red coating.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ § +++ [3] [G] |
PEX 5006 |
AquaPEX Plus |
ASTM F876/F877 |
| 1/2" - 2" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[3] Pipe has a blue, red, or white coating.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ § +++ [3] [G] |
PEX 5006 |
AquaPEX Plus |
CSA B137.5 |
| 1/2" - 2" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[3] Pipe has a blue, red, or white coating.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ § +++ [G] |
PEX 5006 |
hePEX |
ASTM F876/F877 |
| 5/16" | |||
| 3/8" | |||
| 1/2" | |||
| 5/8" | |||
| 3/4" | |||
| 1" | |||
| 1 1/4" | |||
| 1 1/2" | |||
| 2" | |||
| 2 1/2" | |||
| 3" | |||
| 3 1/2" | |||
| 4" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˘ +++ [G] |
PEX 5006 |
hePEX |
CSA B137.5 |
| 2" | |||
| 5/16" | |||
| 1/2" | |||
| 3/4" | |||
| 1 1/4" | |||
| 2 1/2" | |||
| 3 1/2" | |||
| 4" | |||
| 3" | |||
| 1 1/2" | |||
| 1" | |||
| 5/8" | |||
| 3/8" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Circle Pines, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
1" Branch Multiport |
|||
| 4 1/2" Outlet (Q2241050) | |||
|
1" Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261050) | |||
|
1" EP Branch Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101050) | 12 Outlets (1/2") (Q2121050) | ||
|
1" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101000) | |||
|
1" EP Branch Manifold Tee |
|||
| 7 Outlets (Q2271050) | |||
|
1" EP Branch Multi-Port Tee |
|||
| 7 outlets with mounting clips (Q2271051) | 8 outlets with mounting clips (Q2281051) | ||
|
1" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2250400) | 6 Loop (Q2250600) | 8 Loop (Q2250800) | 10 Loop (Q2251000) |
| 12 Loop (Q2251200) | |||
|
1" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2250438) | 6 Loop (Q2250638) | 8 Loop (Q2250838) | 10 Loop (Q2251038) |
| 12 Loop (Q2251238) | |||
|
1" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2210400) | 6 Loop (Q2210600) | 8 Loop (Q2210800) | 10 Loop (Q2211000) |
| 12 Loop (Q2211200) | |||
|
1" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2210438) | 6 Loop (Q2210638) | 8 Loop (Q2210838) | 10 Loop (Q2211038) |
| 12 Loop (Q2211238) | |||
|
1" w/ 1" ProPEX End x ProPEX Outlet |
|||
| 6 Outlet (1/2") (Q2261050) | |||
|
1" w/ two 1" ProPEX End x ProPEX Outlet |
|||
| 6 Outlet (1/2") (Q2261051) | |||
|
1" x 1" Flow Through Multiport |
|||
| 4 1/2" Outlet (Q2241051) | |||
|
1" x 1" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261051) | |||
|
1" x 3/4" F/T w/ ProPEX Outlet |
|||
| 4 Outlet (1/2") (Q2241057) | 6 Outlet (1/2") (Q2261057) | ||
|
1" x 3/4" Flow Through Multiport |
|||
| 3 1/2" Outlet (Q2231057) | |||
|
1" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2241057) | 6 Outlet (Q2261057) | ||
|
1" x 3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2240400) | 6 Loop (Q2240600) | 8 Loop (Q2240800) | 10 Loop (Q2241000) |
| 12 Loop (Q2241200) | |||
|
1" x 3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2240438) | 6 Loop (Q2240638) | 8 Loop (Q2240838) | 10 Loop (Q2241038) |
| 12 Loop (Q2241238) | |||
|
3/4" Branch Manifold |
|||
| 3 Outlet (Q2237550) | 6 Outlet (Q2267550) | ||
|
3/4" Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2247550) | |||
|
3/4" EP Branch Commercial Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2277550) | 8 Outlets (1/2") (Q2287550) | ||
|
3/4" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2077550) | 8 Outlets (1/2") (Q2087550) | ||
|
3/4" EP Branch Opposing Port Multi-port Tee |
|||
| 3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |
|
3/4" F/T w/ two 3/4" ProPEX End x ProPEX Outlet |
|||
| 3 Outlet (1/2") (Q2237557) | 4 Outlet (1/2") (Q2247557) | ||
|
3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2230400) | 6 Loop (Q2230600) | 8 Loop (Q2230800) | 10 Loop (Q2231000) |
| 12 Loop (Q2231200) | |||
|
3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2230438) | 6 Loop (Q2230638) | 8 Loop (Q2230838) | 10 Loop (Q2231038) |
| 12 Loop (Q2231238) | |||
|
3/4" ProPEX Flow Thru x ProPEX Outlet |
|||
| 4 Outlet (1/2") (Q2247557) | |||
|
3/4" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2200400) | 6 Loop (Q2200600) | 8 Loop (Q2200800) | 10 Loop (Q2201000) |
| 12 Loop (Q2201200) | |||
|
3/4" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2200438) | 6 Loop (Q2200638) | 8 Loop (Q2200838) | 10 Loop (Q2201038) |
| 12 Loop (Q2201238) | |||
|
3/4" ProPEX w/ two 3/4" ProPEX End x ProPEX Outlet |
|||
| 2 Outlet (1/2") (Q2227557) | |||
|
3/4" x 3/4" EP Flow-thru Opp. Port Multi-port Tee |
|||
| 3 Outlets (1/2") (Q2337557) | 4 Outlets (1/2") (Q2347557) | 6 Outlets (1/2") (Q2367557) | |
|
3/4" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 2 Outlet (Q2227557) | 3 Outlet (Q2237557) | 4 Outlet (Q2247557) | |
|
3/4" x 3/4" ProPEX Flow thru Manifold |
|||
| 6 Outlet (Q2267557) | |||
|
Branch Manifold |
|||
| 3/4" 6 Outlet (Q2267550) | |||
|
EP F/T Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 3 Outlet (Q2235577) | |||
|
EP F/T Multi-Port Tee Q&E/ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2247577) | |||
|
EP F/T Roll-out Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2245577) | |||
|
EP F/T Roll-out Multi-Port Horizontal Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 4 Outlet (Q2247577) | |||
|
EP F/T Roll-out Multi-Port Vertical Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 3 Outlet (Q2237757) | 3/4" x 3/4" x 3/4" 4 Outlet (Q2247757) | ||
|
ProPEX Flow through Manifold |
|||
| 3/4" x 3/4" 6 Outlet (Q2267557) | |||
|
ľ"xľ"x1", EP Flow-Through Multi-Port Vertical Tee |
|||
| 4 Outlets (Q2247710) | |||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
Aquacenter Valved |
|||
| 3 Outlet (1/2" NPSM) (Q2100300) | 3 Outlet (1/2" ProPEX) (Q2110300) | 4 Outlet (1/2" NPSM) (Q2100400) | 4 Outlet (1/2" ProPEX) (Q2110400) |
| 3/8" Swivel Adapter (Q2120375)[1] | 1/2" Swivel Adapter (Q4360500)[1] | 3/4" Inlet (Q2120750)[1] | 1" Inlet (Q2121000)[1] |
| Coupler (Q2121313)[1] | Coupler Plug (Q2121251)[1] | End Cap (Q2121250)[1] | |
[1] Components are part of the manifold kit. ! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Couplings |
|||
| 1/2" x 1/2" (Q4775050) | 1/2" x 3/4" (Q4775075) | 3/4" x 1" (Q4777510) | |
|
EP Reducing Tee |
|||
| 1 1/4" x 1 1/4" (Q4751350) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 1 1/2" x 2" (Q4752152) |
| 2" x 2" x 1/2" (Q4752250) | |||
|
Elbows |
|||
| 3/4" (Q4760750) | 1/2" (Q4760500) | 1" (Q4761000) | 1 1/4" (Q4711250) |
| 1 1/2" (Q4711500) | |||
|
Plugs |
|||
| 3/8" (Q4350375) | 1/2" (Q4350500) | 3/4" (Q4350750) | 1" (Q4351000) |
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Fire Sprinkler Tee |
|||
| 3/4" x 3/4" 3/4" (FS4757575) | 3/4" x 3/4" x 1" (FS4757710) | 1" x 1" x 3/4" (FS4751175) | 1" x 1" x 1" (FS4751010) |
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 3/4" x 1" (Q7751751) |
| 1" x 1" x 1/2" (Q7751150) | 1" x 1" x 3/4" (Q7751175) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Tees |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 1/2" x 1/2" x 3/4" (Q4755575) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 1/2" x 3/4" (Q4757557) |
| 3/4" x 3/4" x 3/4" (Q4757575) | 3/4" x 3/4" x 1" (Q4757710) | 1" x 3/4" x 3/4" (Q4751775) | 1" x 3/4" x 1" (Q4751751) |
| 1" x 1" x 1/2" (Q4751150) | 1" x 1" x 3/4" (Q4751175) | 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) |
| 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) | 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) | 1 1/2" x 1" x 3/4" (Q4751517) |
| 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) | 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) |
| 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | |||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
1" Branch Multiport |
|||
| 4 1/2" Outlet (Q2241050) | |||
|
1" Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261050) | |||
|
1" EP Branch Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101050) | 12 Outlets (1/2") (Q2121050) | ||
|
1" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 10 Outlets (1/2") (Q2101000) | |||
|
1" EP Branch Manifold Tee |
|||
| 7 Outlets (Q2271050) | |||
|
1" EP Branch Multi-Port Tee |
|||
| 7 outlets with mounting clips (Q2271051) | 8 outlets with mounting clips (Q2281051) | ||
|
1" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2250400) | 6 Loop (Q2250600) | 8 Loop (Q2250800) | 10 Loop (Q2251000) |
| 12 Loop (Q2251200) | |||
|
1" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2250438) | 6 Loop (Q2250638) | 8 Loop (Q2250838) | 10 Loop (Q2251038) |
| 12 Loop (Q2251238) | |||
|
1" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2210400) | 6 Loop (Q2210600) | 8 Loop (Q2210800) | 10 Loop (Q2211000) |
| 12 Loop (Q2211200) | |||
|
1" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2210438) | 6 Loop (Q2210638) | 8 Loop (Q2210838) | 10 Loop (Q2211038) |
| 12 Loop (Q2211238) | |||
|
1" x 1" Flow Through Multiport |
|||
| 4 1/2" Outlet (Q2241051) | |||
|
1" x 1" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 6 Outlet (Q2261051) | |||
|
1" x 3/4" Flow Through Multiport |
|||
| 3 1/2" Outlet (Q2231057) | |||
|
1" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2241057) | 6 Outlet (Q2261057) | ||
|
1" x 3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2240400) | 6 Loop (Q2240600) | 8 Loop (Q2240800) | 10 Loop (Q2241000) |
| 12 Loop (Q2241200) | |||
|
1" x 3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2240438) | 6 Loop (Q2240638) | 8 Loop (Q2240838) | 10 Loop (Q2241038) |
| 12 Loop (Q2241238) | |||
|
3/4" Branch Manifold |
|||
| 3 Outlet (Q2237550) | 6 Outlet (Q2267550) | ||
|
3/4" Branch w/ 1/2" ProPEX Outlet |
|||
| 4 Outlet (Q2247550) | |||
|
3/4" EP Branch Commerical Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2277550) | 8 Outlets (1/2") (Q2287550) | ||
|
3/4" EP Branch Elbow Commercial Multi-Port Tee |
|||
| 7 Outlets (1/2") (Q2077550) | 8 Outlets (1/2") (Q2087550) | ||
|
3/4" EP Branch Opposing Port Multi-port Tee |
|||
| 3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |
|
3/4" ProPEX Flow Thru w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2230400) | 6 Loop (Q2230600) | 8 Loop (Q2230800) | 10 Loop (Q2231000) |
| 12 Loop (Q2231200) | |||
|
3/4" ProPEX Flow Thru w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q42230438) | 6 Loop (Q2230638) | 8 Loop (Q2230838) | 10 Loop (Q2231038) |
| 12 Loop (Q2231238) | |||
|
3/4" ProPEX Inlet w/ 1/2" ProPEX Outlet |
|||
| 4 Loop (Q2202400) | 6 Loop (Q2200600) | 8 Loop (Q2200800) | 10 Loop (Q2201000) |
| 12 Loop (Q2201200) | |||
|
3/4" ProPEX Inlet w/ 3/8" ProPEX Outlet |
|||
| 4 Loop (Q2200438) | 6 Loop (Q2200638) | 8 Loop (Q2200838) | 10 Loop (Q2201038) |
| 12 Loop (Q2201238) | |||
|
3/4" x 3/4" EP Flow-thru Opp. Port Multi-port Tee |
|||
| 3 outlets (1/2") (Q2337557) | 4 outlets (1/2") (Q2347557) | 6 outlets (1/2") (Q2367557) | |
|
3/4" x 3/4" Flow Thru Branch w/ 1/2" ProPEX Outlet |
|||
| 2 Outlet (Q2227557) | 3 Outlet (Q2237557) | 4 Outlet (Q2247557) | |
|
3/4" x 3/4" ProPex Flow thru Manifold |
|||
| 6 Outlet (Q2267557) | |||
|
Branch Manifold |
|||
| 3/4" 6 Outlet (Q2267550) | |||
|
EP F/T Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 3 Outlet (Q2235577) | |||
|
EP F/T Multi-Port Tee Q&E/ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2247557) | |||
|
EP F/T Roll-out Multi-Port Elbow ProPEX |
|||
| 3/4" x 3/4" 4 Outlet (Q2245577) | |||
|
EP F/T Roll-out Multi-Port Horizontal Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 4 Outlet (Q2247577) | |||
|
EP F/T Roll-out Multi-Port Vertical Tee ProPEX |
|||
| 3/4" x 3/4" x 3/4" 4 Outlet (Q2247757) | 3/4" x 3/4" x 3/4" 3 Outlet (Q2237757) | ||
|
ProPEX Flow through Manifold |
|||
| 3/4" x 3/4" 6 Outlet (Q2267557) | |||
|
ľ"xľ"x1", EP Flow-Through Multi-Port Vertical Tee |
|||
| 4 Outlets (Q2247710) | |||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
Aquacenter Valved |
|||
| 3 Outlet (1/2" NPSM) (Q2100300) | 3 Outlet (1/2" ProPEX) (Q2110300) | 4 Outlet (1/2" NPSM) (Q2100400) | 4 Outlet (1/2" ProPEX) (Q2110400) |
| 3/8" Swivel Adapter (Q2120375)[1] | 1/2" Swivel Adapter (Q4360500)[1] | 3/4" Inlet (Q2120750)[1] | 1" Inlet (Q2121000)[1] |
| Coupler (Q2121313)[1] | Coupler Plug (Q2121251)[1] | End Cap (Q2121250)[1] | |
[1] Components are part of the manifold kit. ! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings! ˘ § +++ [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Couplings |
|||
| 1/2" x 1/2" (Q4775050) | 1/2" x 3/4" (Q4775075) | 3/4" x 1" (Q477510) | |
|
EP Reducing Tee |
|||
| 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 1 1/2" x 2" (Q4752152) | 2" x 2" x 1/2" (Q4752250) | 1 1/2" x 1" x 1 1/2" (Q4751505) |
| 1 1/4" x 1 1/4" x 1/2" (Q4751350) | |||
|
Elbows |
|||
| 3/4" (Q4760750) | 1/2" (Q4760500) | 1" (Q4761000) | 1 1/4" (Q4711250) |
| 1 1/2" (Q4711500) | |||
|
Plugs |
|||
| 3/8" (Q43550375) | 1/2" (Q4350500) | 3/4" (Q4350750) | 1" (Q4351000) |
|
ProPEX EP Coupling (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7777575) | 3/4" x 1" (Q7777510) | 1" x 1" (Q7771010) | |
|
ProPEX EP Elbow (PEX x PEX) |
|||
| 3/4" x 3/4" (Q7760750) | 1" x 1" (Q7761000) | ||
|
ProPEX EP Fire Sprinkler Tee |
|||
| 3/4" x 3/4" 3/4" (FS4757575) | 3/4" x 3/4" x 1" (FS4757710) | 1" x 1" x 3/4" (FS4751175) | 1" x 1" x 1" (FS4751010) |
|
ProPEX EP Reducing Tee (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1/2" (Q7707550) | 3/4" x 3/4" x 1" (Q7757710) | 1" x 3/4" x 3/4" (Q7751775) | 1" x 3/4" x 1" (Q7751751) |
| 1" x 1" x 1/2" (Q7751150) | 1" x 1" x 3/4" (Q7751175) | ||
|
ProPEX EP Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" (Q7755050) | 3/4" x 3/4" x 3/4" (Q7757575) | 1" x 1" x 1" (Q7751010) | |
|
Tees |
|||
| 1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 1/2" x 1/2" (Q4757555) | 3/4" x 1/2" x 3/4" (Q4757557) | 3/4" x 3/4" x 3/4" (Q4757575) |
| 1" x 3/4" x 3/4" (Q4751775) | 1" x 3/4" x 1" (Q4751751) | 1" x 1" x 1/2" (Q4751150) | 1 1/4" x 1" x 3/4" (Q4751317) |
| 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) | 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) |
| 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) |
| 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | ||
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valve! ˘ § ++ [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASTM F1960 |
|
ProPEX EP Inline Valve (PEX x PEX) |
|||
| 3/4" x 3/4" (Q4837575) | 1/2" x 1/2" (Q4905050) | ||
! Product may or may not bear the NSF U.P. Code marking.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valve! # + ˘ § [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASTM F1960 |
| ProPEX EP Angle Stop Valve 1/2" (Q4905038) | |||
| ProPEX EP Straight Stop Valve 1/2" (Q4935038) | |||
! Product may or may not bear the NSF U.P. Code marking.
# Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valve! ˘ § ++ [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX EP Inline Valve (PEX x PEX) |
|||
| 1/2" x 1/2" (Q4905050) | |||
! Product may or may not bear the NSF U.P. Code marking.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valve! # + ˘ § [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
ASME A112.18.1/CSA B125.1 |
| ProPEX EP Angle Stop Valve 1/2" (Q4905038) | |||
| ProPEX EP Straight Stop Valve 1/2" (Q4935038) | |||
! Product may or may not bear the NSF U.P. Code marking.
# Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valve! ˘ § ++ [G] |
PLS / Ceramic |
Uponor Logo (W/U) |
CSA B125.3 |
|
ProPEX EP Inline Valve (PEX x PEX) |
|||
| 3/4" x 3/4" (Q4837575) | |||
! Product may or may not bear the NSF U.P. Code marking.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Lakeville, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings! ˘ § [G] |
PLS* |
Uponor Logo (U/W) |
ASTM F1960 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Coupling |
|||
| 1/2" x 1/2" (Q4775050) | 1 1/4" x 3/4" (Q4771307) | 1 1/4" x 1 1/4" (Q4771313) | 1 1/2" x 3/4" (Q4771507) |
| 1 1/2" x 1" (Q4771510) | 1 1/2" x 1 1/4" (Q4771513) | 1 1/2" x 1 1/2" (Q4771515) | 2" (Q4772020) |
| 2" x 1 1/2" (Q4772015) | |||
|
EP Reducing Tee |
|||
| 1 1/4" x 1 1/4" x 1/2" (Q4751350) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 1 1/2" x 2" (Q4752152) |
| 2" x 2" 1/2" (Q4752250) | |||
|
Elbows |
|||
| 3/4" x 3/4" (Q4760750) | 1 1/4" x 1 1/4" (Q4761250) | 1 1/2" x 1 1/2" (Q4761500) | 2" x 2" (Q4762000) |
| 2" x 2" (Q4762245) | |||
|
Plugs |
|||
| 1/2" (Q4350500) | 1 1/4" (Q4351250) | 1 1/2" (Q4351500) | 2" (Q4352000) |
|
Tees |
|||
| 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) |
| 1 1/2" x 1 1/4" x 3/4" (Q4751537) | 1 1/2" x 1 1/4" x 1" (Q4751531) | 1 1/2" x 1 1/4" x 1 1/4" (Q4751533) | 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) |
| 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) |
| 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | 2" x 1 1/2" x 3/4" (Q4752575) | 2" x 1 1/2" x 1" (Q4752051) |
| 2" x 1 1/2" x 1 1/4" (Q4752053) | 2" x 1 1/2" x 1 1/2" (Q4752055) | 2" x 2" x 3/4" (Q4752275) | 2" x 2" x 1" (Q4752210) |
| 2" x 2" x 1 1/4" (Q4752213) | 2" x 2" x 1 1/2" (Q4752215) | 2" x 2" x 2" (Q4752000) | |
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings! ˘ § [G] |
PLS* |
Uponor Logo (U/W) |
CSA B137.5 |
|
45 Degree EP Elbow |
|||
| 1 1/2" x 1 1/2" (Q4761515) | 2" x 2" (Q4762020) | ||
|
Coupling |
|||
| 1/2" x 1/2" (Q4775050) | 1 1/4" x 3/4" (Q4771307) | 1 1/4" x 1" (Q4771310) | 1 1/4" x 1 1/4" (Q4771313) |
| 1 1/2" x 3/4" (Q4771507) | 1 1/2" x 1" (Q4771510) | 1 1/2" x 1 1/4" (Q4771513) | 1 1/2" x 1 1/2" (Q4771515) |
| 2" (Q4772020) | 2" x 1 1/2" (Q4772015) | 2" x 2" (Q4772020) | |
|
EP Reducing Tee |
|||
| 1 1/4" x 1 1/4" x 1/2" (Q4751350) | 1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 2" x 2" x 1/2" (Q4752250) |
| 2" x 1 1/2" x 2" (Q4752152) | |||
|
Elbows |
|||
| 3/4" x 3/4" (Q4760750) | 1 1/4" x 1 1/4" (Q4761250) | 1 1/2" x 1 1/2" (Q4761500) | 2" x 2" (Q4762000) |
| 2" x 2" (Q4762245) | |||
|
Plugs |
|||
| 1/2" (Q4350500) | 1 1/4" (Q4351250) | 1 1/2" (Q4351500) | 2" (Q4352000) |
|
Tees |
|||
| 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) |
| 1 1/4" x 1 1/4" x 1 1/4" (Q4751313) | 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | 1 1/2" x 1 1/4" x 3/4" (Q4751537) |
| 1 1/2" x 1 1/4" x 1" (Q4751531) | 1 1/2" x 1 1/4" x 1 1/4" (Q4751533) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) |
| 1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | 2" x 1 1/2" x 3/4" (Q4752575) | 2" x 1 1/2" x 1" (Q4752051) |
| 2" x 1 1/2" x 1 1/4" (Q4752053) | 2" x 1 1/2" x 1 1/2" (Q4752055) | 2" x 2" x 3/4" (Q4752275) | 2" x 2" x 1" (Q4752210) |
| 2" x 2" x 1 1/4" (Q4752213) | 2" x 2" x 1 1/2" (Q4752215) | 2" x 2" x 2" (Q4752000) | |
! Product may or may not bear the NSF U.P. Code marking.
* PLS - Polysulfone
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Middlefield, OH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Riser Tubing* +++ [G] |
PEX |
AquaPEX |
ASME A112.18.6/CSA B125.6 |
|
3/8" O.D. x 12" Closet Riser |
|||
| F1082512 | |||
|
3/8" O.D. x 12" Lav Riser |
|||
| F1072512 | |||
|
3/8" O.D. x 20" Closet Riser |
|||
| F1082520 | |||
|
3/8" O.D. x 20" Lav Riser |
|||
| F1072520 | |||
|
3/8" O.D. x 30" Lav Riser |
|||
| F1072530 | |||
|
3/8" O.D. x 36" Lav Riser |
|||
| F1072536 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Liberty, SC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings+ ˘ § [G] |
MLTPL |
ProPEX |
ASTM F1960 |
| 1/2" ProPEX 4-Port Fitting | |||
|
ProPEX Fire Sprinkler Adapter Tee |
|||
| 3/4" PEX x 3/4" PEX x 3/4" PEX x 1/2 FNPT (Q7527575) | 1" PEX x 1" PEX x 1/2" FNPT (Q7521010) | ||
|
ProPEX Fire Sprinkler Adapter Left Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7547550) | 1" PEX x 1/2" FNPT (Q7541050) | ||
|
ProPEX Fire Sprinkler Adapter Right Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7537550) | 1" PEX x 1/2" FNPT (Q7531050) | ||
|
ProPEX Fire Sprinkler Adapter |
|||
| 3/4" PEX x 1/2" FNPT (Q7517550) | 1" PEX x 1/2" FNPT (Q7511050) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ˘ § [G] |
MLTPL |
ProPEX |
CSA B137.5 |
| 1/2" ProPEX 4-Port Fitting | |||
|
ProPEX Fire Sprinkler Adapter Tee |
|||
| 3/4" PEX x 3/4" PEX x 3/4" PEX x 1/2 FNPT (Q7527575) | 1" PEX x 1" PEX x 1/2" FNPT (Q7521010) | ||
|
ProPEX Fire Sprinkler Adapter Left Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7547550) | 1" PEX x 1/2" FNPT (Q7541050) | ||
|
ProPEX Fire Sprinkler Adapter Right Elbow |
|||
| 3/4" PEX x 1/2" FNPT (Q7537550) | 1" PEX x 1/2" FNPT (Q7531050) | ||
|
ProPEX Fire Sprinkler Adapter |
|||
| 3/4" PEX x 1/2" FNPT (Q7517550) | 1" PEX x 1/2" FNPT (Q7511050) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Brecia, Italy
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | 1 1/4" x 1 1/4" (LF4571313) |
| 2" x 2" (LF4572020) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
| 2" x 2" (LF4522020) | |||
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Fire Sprinkler/ProPEX Brass Tee |
|||
| 3/4" PEX x 3/4" PEX x 1/2" FNPT (LF7707575) | 1" PEX x 1" PEX x 1/2" FNPT (LF7701010) | ||
|
ProPEX (LF) Brass Elbow |
|||
| 1/2" PEX x 1/2" MIP (LF4125050) | 1/2" PEX x 1/2" PEX (LF4710500) | 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) |
| 1 1/4" PEX x 1 1/4" PEX (LF4711250) | 1 1/2" PEX x 1 1/2" PEX (LF4711500) | ||
|
ProPEX (LF) Brass Plug |
|||
| 3/8" PEX (LF4533838) | |||
|
ProPEX (LF) Brass to PE Coupling |
|||
| 1/2" PEX x 1/2" PE (LF4585050) | 3/4" PEX x 3/4" PE (3/4" PEX x 3/4" PB) | 1" PEX x 1" PE (LF4591010) | |
|
ProPEX Drop Ear (LF) Brass Elbow |
|||
| 1/2" PEX x 3/8" FIP (LF4235038) | 1/2" PEX x 1/2" FIP (LF4235050) | 3/4" PEX x 3/4" FIP (LF4237575) | 1" PEX x 1" FIP (LF4231010) |
|
ProPEX LF Brass Coupling |
|||
| 3/8" PEX x 1/2" PEX (LF4543850) | 1/2" PEX x 1/2" PEX (LF4545050) | 1/2" PEX x 3/4" PEX (LF4545075) | 3/4" x 3/4" (LF4547575) |
| 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" PEX x 1" PEX (LF4541310) | 1 1/4" PEX x 1 1/4" PEX (LF4541313) |
| 1 1/2" PEX x 1 1/4" PEX (LF4541513) | 1 1/2" PEX x 1 1/2" PEX (LF4541515) | 2" PEX x 1 1/2" PEX (LF4542015) | |
|
ProPEX LF Brass Female Threaded Adapter |
|||
| 1" PEX x 3/4" NPT (LF4571075) | |||
|
ProPEX LF Brass Reducing Tee |
|||
| 1/2" PEX x 1/2" PEX x 3/4" PEX (LF4705575) | 3/4" PEX x 1/2" PEX x 1/2" PEX (LF4707555) | 3/4" PEX x 1/2" PEX x 3/4" PEX (LF4707557) | 3/4" x 3/4" x 1/2" (LF4707550) |
| 3/4" x 3/4" x 3/4" (LF4707575) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 3/4" x 3/4" (LF4701775) | 1" x 3/4" x 1" (LF4701751) |
| 1" x 1" x 1/2" (LF4701150) | 1" x 1" x 3/4" (LF4701175) | 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (LF4701337) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (LF4701557) |
| 1 1/2" PEX x 1 1/2" PEX x 1" PEX (LF4701551) | |||
|
ProPEX LF Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX LF Brass Tee |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 1/2" Copper x 1/2" Copper x 1/2" Female NPT (LF4705125) | 1" x 1" x 1" (LF4701010) | |
|
Q&E/ProPEX Brass FS Elbow |
|||
| 3/4" PEX x 1/2" FNPT (LF7711050) | 3/4" PEX x 1/2" FNPT (LF7717550) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
|
Brass Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4515050) | 3/4" x 3/4" (LF4517575) | ||
|
Brass Female Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4575050) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | 1 1/4" x 1 1/4" (LF4571313) |
| 2" x 2" (LF4572020) | |||
|
Brass Fitting Adapter (PEX x Copper) |
|||
| 1/2" x 1/2" (LF4505050) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | 1" x 1" (LF4501010) |
| 1 1/4" x 1 1/4" (LF4501313) | |||
|
Brass Male Threaded Adapter (PEX x NPT) |
|||
| 1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 1" x 1" (LF4521010) | 1 1/4" x 1 1/4" (LF4521313) |
| 2" x 2" (LF4522020) | |||
|
Brass Sweat Adapter (PEX x Copper) |
|||
| 1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1 1/4" x 1 1/4" (LF4511313) | |
|
Fire Sprinkler/ProPEX Brass Tee |
|||
| 3/4" PEX x 3/4" PEX x 1/2" FNPT (LF7707575) | 1" PEX x 1" PEX x 1/2" FNPT (LF7701010) | ||
|
ProPEX (LF) Brass Elbow |
|||
| 1/2" PEX x 1/2" MIP (LF4125050) | 1/2" PEX x 1/2" PEX (LF4710500) | 3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) |
| 1 1/4" PEX x 1 1/4" PEX (LF4711250) | 1 1/2" PEX x 1 1/2" PEX (LF4711500) | ||
|
ProPEX (LF) Brass Plug |
|||
| 3/8" PEX (LF4533838) | |||
|
ProPEX (LF) Brass to PE Coupling |
|||
| 1/2" PEX x 1/2" PE (LF4585050) | 1" PEX x 1" PE (LF4591010) | 3/4" PEX x 3/4" PE (LF4587575) | |
|
ProPEX Drop Ear (LF) Brass Elbow |
|||
| 1/2" PEX x 3/8" FIP (LF4235038) | 1/2" PEX x 1/2" FIP (LF4235050) | 3/4" PEX x 3/4" FIP (LF4237575) | 1" PEX x 1" FIP (LF4231010) |
|
ProPEX LF Brass Coupling |
|||
| 3/8" PEX x 1/2" PEX (LF4543850) | 1/2" PEX x 1/2" PEX (LF4545050) | 1/2" PEX x 3/4" PEX (LF4545075) | 3/4" x 3/4" (LF4547575) |
| 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" PEX x 1" PEX (LF4541310) | 1 1/4" PEX x 1 1/4" PEX (LF4541313) |
| 1 1/2" PEX x 1 1/4" PEX (LF4541513) | 1 1/2" PEX x 1 1/2" PEX (LF4541515) | 2" PEX x 1 1/2" PEX (LF4542015) | |
|
ProPEX LF Brass Female Threaded Adapter |
|||
| 1" PEX x 3/4" NPT (LF4571075) | |||
|
ProPEX LF Brass Reducing Tee |
|||
| 1/2" PEX x 1/2" PEX x 3/4" PEX (LF4705575) | 3/4" PEX x 1/2" PEX x 1/2" PEX (LF4707555) | 3/4" PEX x 1/2" PEX x 3/4" PEX (LF4707557) | 3/4" x 3/4" x 1/2" (LF4707550) |
| 3/4" x 3/4" x 3/4" (LF4707575) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 3/4" x 3/4" (LF4701775) | 1" x 3/4" x 1" (1" x 3/4" x 1") |
| 1" x 1" x 1/2" (LF4701150) | 1" x 1" x 3/4" (LF4701175) | 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (LF4701337) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (LF4701557) |
| 1 1/2" PEX x 1 1/2" PEX x 1" PEX (LF4701551) | |||
|
ProPEX LF Brass Sweat Adapter |
|||
| 1/2" (LF4995050) | |||
|
ProPEX LF Brass Tee |
|||
| 1/2" x 1/2" x 1/2" (LF4705050) | 1/2" Copper x 1/2" Copper x 1/2" Female NPT (LF4705125) | 1" x 1" x 1" (LF4701010) | |
|
Q&E/ProPEX Brass FS Elbow |
|||
| 3/4" PEX x 1/2" FNPT (LF7711050) | 3/4" PEX x 1/2" FNPT (LF7717550) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 1/2" MIP (LF4795050) | 1/2” PEX x 3/4” NH (LF4885075) | 1/2” PEX x 3/4” NH (LF4895075) | |
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 3/8" PEX x 1/2" Copper Adapter (LF4803850) | 1/2" PEX x 1/2" PEX (LF4815050) | 1/2" PEX x 1/2" Copper Adapter (LF4805050) | 3/4" PEX x 3/4" PEX (LF4817575) |
| 3/4" PEX x 3/4" Copper Adapter (LF4807575) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
Compression Angle Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4410500) | |||
|
Compression Straight Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4220500) | |||
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
|
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||
| 1/2" PEX (LF4865038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 1/2" MIP (LF4795050) | |||
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 1/2" PEX x 1/2" Copper Adapter (LF4805050) | 1/2" PEX x 1/2" PEX (LF4815050) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
Compression Angle Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4410500) | |||
|
Compression Straight Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4220500) | |||
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
|
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||
| 1/2" PEX (LF4865038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX LF Brass Ball Valve Full Port |
|||
| 3/4" PEX x 3/4" PEX (LF4827575) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
LF Brass Ball Valve |
|||
| 1/2" PEX x 1/4" Compression (LF4838811) | |||
|
ProPEX LF Brass Inline Ice Maker Tee |
|||
| 1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
LF Brass Ball Valve |
|||
| 1/2" PEX x 1/4" Compression (LF4838811) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B125.3 |
|
ProPEX LF Brass Ball Valve Full Port |
|||
| 3/4" PEX x 3/4" PEX (LF4827575) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B125.3 |
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 3/4" PEX x 3/4" PEX (LF4817575) | 3/4" PEX x 3/4" Copper Adapter (LF4807575) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 3/4" NH (LF4885075) | 1/2" PEX x 3/4" NH (LF4895075) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve (Large Bore) |
|||
| 3/8" PEX x 1/2" Copper Adapter (LF4803850) | |||
|
ProPEX LF Brass Inline Ice Maker Tee |
|||
| 1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
|
ProPEX LF Brass Ball Valve Full Port |
|||
| 1" PEX x 1" PEX (LF4821010) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 850
Processing time was 1 seconds