These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=72320&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Viega LLC. | |
| The Epic Center | |
| 301 North Main Street | |
| Suite 900 | |
| Wichita, KS 67202-4809 | |
| United States | |
| 800-774-5237 |
Facility : # 1 Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
MLTPL |
PEX Press Stub-Out |
ASTM F877 |
|
Model # 28200ZL |
|||
| 92221 PEX Press Copper Tub Els, 1/2" PEX x 1/2" C (6" x 3") | |||
|
Model # 28201ZL |
|||
| 92441 PEX Press Copper Stub-Out Elbows, 3/4" PEX x 3/4" C (3.5" x 8") | 92406 PEX Press Copper Stub-Out Elbows, 3/8" PEX x 1/2" C (3.5" x 8") | 92421 PEX Press Copper Stub-Out Elbows, 1/2" PEX x 1/2" C (3.5" x 8") | |
|
Model # 28202ZL |
|||
| 92616 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (15") | 92609 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (8") | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
PEX Press Stub-Out |
CSA B137.5 |
|
Model # 28200ZL |
|||
| 92221 PEX Press Copper Tub Els, 1/2" PEX x 1/2" C (6" x 3") | |||
|
Model # 28201ZL |
|||
| 92406 PEX Press Copper Stub-Out Elbows, 3/8" PEX x 1/2" C (3.5" x 8") | 92421 PEX Press Copper Stub-Out Elbows, 1/2" PEX x 1/2" C (3.5" x 8") | 92441 PEX Press Copper Stub-Out Elbows, 3/4" PEX x 3/4" C (3.5" x 8") | |
|
Model # 28202ZL |
|||
| 92609 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (8") | 92616 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (15") | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : McPherson, KS
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings* ˘ § +++ [G] |
PPSU |
PEX Press Polymer |
ASTM F877 |
|
Press Tees (models V5618) |
|||
| 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 3/8" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1/2" PEX x 3/8" PEX x 3/8" PEX | |||
|
Press Plugs (models V5656) |
|||
| 3/8" PEX | 1/2" PEX | ||
|
Press Couplings (models V5615) |
|||
| 1/2" PEX | |||
|
Press Elbows (models V5616) |
|||
| 3/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1/2" PEX x 1/2" PEX x 3/8" PEX | |||
|
Press Tees (models V5618) |
|||
| 3/4" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1" PEX | |||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX | |||
|
Press Plugs (models V5656) |
|||
| 3/4" PEX | |||
|
Press Tees (models V5618) |
|||
| 1" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1/2" PEX x 1/2" PEX x 3/4" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1 1/4" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 3/4" PEX x 1/2" PEX x 1/2" PEX | |||
|
Press Plugs (models V5656) |
|||
| 1" PEX | |||
|
Press Tees (models V5618) |
|||
| 1 1/4" PEX | 1 1/2" PEX | ||
|
Press Couplings (models V5615) |
|||
| 1 1/4" PEX | |||
|
Press Plugs (models V5656) |
|||
| 1 1/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 3/4" PEX x 1/2" PEX x 3/4" PEX | |||
|
Press Elbows (models V5616) |
|||
| 2" PEX | |||
|
Press Plugs (models V5656) |
|||
| 1 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 3/4" PEX x 3/4" PEX x 1/2" PEX | |||
|
Press Tees (models V5618) |
|||
| 2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1/2" PEX x 3/8" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 1/2" PEX x 1/2" PEX | |||
|
Press Plugs (models V5656) |
|||
| 2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1/2" PEX x 3/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 3/4" PEX x 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX x 1" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 1/2" PEX x 1" PEX | 1" PEX x 1" PEX x 1/2" PEX | ||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX x 1 1/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 3/4" PEX x 3/4" PEX | |||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX x 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 3/4" PEX x 1" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1" PEX x 1 1/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 1" PEX x 3/4" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1" PEX x 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1 1/4" PEX x 1 1/2" PEX | 2" PEX | ||
|
Press Reducing Tees (models V5618) |
|||
| 1 1/4" PEX x 1 1/4" PEX x 1" PEX | |||
|
Press Couplings (models V5615) |
|||
| 2" PEX x 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1 1/4" PEX x 1" PEX x 3/4" PEX | 1 1/4" PEX x 1" PEX x 1" PEX | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX | 1 1/2" PEX x 1 1/2" PEX x 1" PEX |
| 1 1/2" PEX x 1 1/2" PEX x 1 1/4" PEX | 1 1/2" PEX x 1" PEX x 3/4" PEX | 1 1/2" PEX x 1" PEX x 1" PEX | 1 1/2" PEX x 1 1/4" PEX x 3/4" PEX |
| 1 1/2" PEX x 1 1/4" PEX x 1" PEX | 1 1/2" PEX x 1 1/4" PEX x 1 1/4" PEX | 2" PEX x 1 1/2" PEX x 3/4" PEX | 2" PEX x 1 1/2" PEX x 1" PEX |
| 2" PEX x 1 1/4" PEX x 1 1/2" PEX | 2" PEX x 1 1/2" PEX x 1 1/2" PEX | 2" PEX x 2" PEX x 3/4" PEX | 2" PEX x 2" PEX x 1" PEX |
| 2" PEX x 2" PEX x 1 1/4" PEX | 2" PEX x 2" PEX x 1 1/2" PEX | ||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* ˘ § +++ [G] |
PPSU |
PEX Press Polymer |
CSA B137.5 |
|
Press Tees (models V5618) |
|||
| 1/2" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1/2" PEX x 3/8" PEX x 3/8" PEX | |||
|
Press Couplings (models V5615) |
|||
| 3/8" PEX | |||
|
Press Elbows (models V5616) |
|||
| 3/4" PEX | |||
|
Press Tees (models V5618) |
|||
| 3/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1/2" PEX x 1/2" PEX x 3/8" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1/2" PEX | 3/4" PEX | ||
|
Press Reducing Tees (models V5618) |
|||
| 1/2" PEX x 1/2" PEX x 3/4" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1" PEX | |||
|
Press Tees (models V5618) |
|||
| 1" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1 1/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 3/4" PEX x 1/2" PEX x 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1" PEX | |||
|
Press Tees (models V5618) |
|||
| 1 1/4" PEX | 1 1/2" PEX | ||
|
Press Couplings (models V5615) |
|||
| 1 1/4" PEX | |||
|
Press Elbows (models V5616) |
|||
| 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 3/4" PEX x 1/2" PEX x 3/4" PEX | |||
|
Press Elbows (models V5616) |
|||
| 2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1 1/2" PEX | |||
|
Press Tees (models V5618) |
|||
| 2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 3/4" PEX x 3/4" PEX x 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1/2" PEX x 3/8" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 1/2" PEX x 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1/2" PEX x 3/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 3/4" PEX x 1/2" PEX | |||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX x 1" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 1/2" PEX x 1" PEX | 1" PEX x 1" PEX x 1/2" PEX | ||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX x 1 1/4" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 3/4" PEX x 3/4" PEX | 1" PEX x 3/4" PEX x 1" PEX | ||
|
Press Couplings (models V5615) |
|||
| 3/4" PEX x 1 1/2" PEX | 1" PEX x 1 1/4" PEX | ||
|
Press Reducing Tees (models V5618) |
|||
| 1" PEX x 1" PEX x 3/4" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1" PEX x 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX | |||
|
Press Couplings (models V5615) |
|||
| 1 1/4" PEX x 1 1/2" PEX | 2" PEX | ||
|
Press Reducing Tees (models V5618) |
|||
| 1 1/4" PEX x 1 1/4" PEX x 1" PEX | 1 1/4" PEX x 1" PEX x 3/4" PEX | ||
|
Press Couplings (models V5615) |
|||
| 2" PEX x 1 1/2" PEX | |||
|
Press Reducing Tees (models V5618) |
|||
| 1 1/4" PEX x 1" PEX x 1" PEX | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX | 1 1/2" PEX x 1 1/2" PEX x 1" PEX | 1 1/2" PEX x 1 1/2" PEX x 1 1/4" PEX |
| 1 1/2" PEX x 1" PEX x 3/4" PEX | 1 1/2" PEX x 1" PEX x 1" PEX | 1 1/2" PEX x 1 1/4" PEX x 3/4" PEX | 1 1/2" PEX x 1 1/4" PEX x 1" PEX |
| 1 1/2" PEX x 1 1/4" PEX x 1 1/4" PEX | 2" PEX x 1 1/2" PEX x 3/4" PEX | 2" PEX x 1 1/2" PEX x 1" PEX | 2" PEX x 1 1/4" PEX x 1 1/2" PEX |
| 2" PEX x 1 1/2" PEX x 1 1/2" PEX | 2" PEX x 2" PEX x 3/4" PEX | 2" PEX x 2" PEX x 1" PEX | 2" PEX x 2" PEX x 1 1/4" PEX |
| 2" PEX x 2" PEX x 1 1/2" PEX | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX 5006 |
Apollo® |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX |
Apollo® |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX 5006 |
Vanguard |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX |
Vanguard |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX |
ViegaPEX |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing$ * ^ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX Barrier |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
$ This product is barrier tubing.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing$ * ^ ˘ § +++ [G] |
PEX |
ViegaPEX Barrier |
CSA B137.5 |
| >=1/4" SDR 9 | |||
$ This product is barrier tubing.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˇ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
ˇ This is a solid wall black tubing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* ^ ˇ ˘ § +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
ˇ This is a solid wall black tubing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing! * ^ ~ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
! Pipe has a black inner layer with a red, white, or blue co-extruded outer layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing! * ^ ~ ˘ § +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| >=1/4" SDR 9 | |||
! Pipe has a black inner layer with a red, white, or blue co-extruded outer layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
MT Insert-Crimp Fittings |
ASTM F2159 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
MT Insert-Crimp Fittings |
CSA B137.5 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
PolyAlloy Crimp Fittings |
ASTM F2159 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
PolyAlloy Crimp Fittings |
CSA B137.5 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
Vanguard |
ASTM F2159 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
Vanguard |
CSA B137.5 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+++ [G] |
MLTPL |
Viega PPSU Supply Adapter |
ASTM F877/F2159 |
| 3/4" - 1" | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ ## ++ *** [G] |
PLS |
LEAD-FREE MANABLOC® |
ASTM F877 |
| 3/8" - 1" CTS | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
## Certified for a maximum of 36 ports. Manifold Certification includes brass and bronze
Manabloc Barb Adapters using a maximum of 16 adapters for hot applications and a maximum
of 22 adapters for cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
*** LEAD-FREE MANABLOC® Manifold tested for chemical extraction, dimensions, hydrostatic
burst pressure at 73°F and 180°F, hydrostatic sustained pressure at 180°F, thermocyclic,
and excessive temperature and pressure capability.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ ## ++ *** [G] |
PLS |
LEAD-FREE MANABLOC® |
CSA B137.5 |
| 3/8" - 1" CTS | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
## Certified for a maximum of 36 ports. Manifold Certification includes brass and bronze
Manabloc Barb Adapters using a maximum of 16 adapters for hot applications and a maximum
of 22 adapters for cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
*** LEAD-FREE MANABLOC® Manifold tested for chemical extraction, dimensions, hydrostatic
burst pressure at 73°F and 180°F, hydrostatic sustained pressure at 180°F, thermocyclic,
and excessive temperature and pressure capability.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65152 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 2 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65152 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 2 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65153 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 3 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65153 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 3 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65154 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65154 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* § µ %% +++ [G] |
PSU |
65104 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65104 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65254 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65254 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65256 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 1/2" (PEX Crimp), 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65256 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 1/2" (PEX Crimp), 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65206 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 1/2" (PEX Crimp), 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65206 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 1/2" (PEX Crimp), 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65258 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 1/2" (PEX Crimp), 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65258 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 1/2" (PEX Crimp), 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [1] [G] |
MLTPL |
50023 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[1] Formerly MRXDC34.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [1] [G] |
MLTPL |
50023 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[1] Formerly MRXDC34.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [2] [G] |
MLTPL |
50133 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[2] Formerly MRXDC24.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [2] [G] |
MLTPL |
50133 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[2] Formerly MRXDC24.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50141 Manabloc PolyAlloy Supply Adapter |
ASTM F877/F2159 |
| 3/4" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50141 Manabloc PolyAlloy Supply Adapter |
CSA B137.5 |
| 3/4" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50151 Manabloc PolyAlloy Supply Adapter |
ASTM F877/F2159 |
| 1" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50151 Manabloc PolyAlloy Supply Adapter |
CSA B137.5 |
| 1" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51123 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51123 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51133 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51133 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or
cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659292 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 2 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659292 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 2 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659302 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 3 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659302 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 3 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659312 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659312 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659322 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659322 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659332 Poly PEX Press Manifold |
ASTM F877 |
| 1"xľ" PEX Crimp x ˝" PEX Crimp, 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659332 Poly PEX Press Manifold |
CSA B137.5 |
| 1"xľ" PEX Crimp x ˝" PEX Crimp, 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659342 Poly PEX Press Manifold |
ASTM F877 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659342 Poly PEX Press Manifold |
CSA B137.5 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659352 Poly PEX Press Manifold |
ASTM F877 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659352 Poly PEX Press Manifold |
CSA B137.5 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659362 Poly PEX Press Manifold |
ASTM F877 |
| 1" PEX Crimp x 1/2" PEX Crimp, 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659362 Poly PEX Press Manifold |
CSA B137.5 |
| 1" PEX Crimp x 1/2" PEX Crimp, 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Barb Adapter |
ASTM F877/F1807 |
| 3/8" - 1/2" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
$$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold
applications and a maximum of 16 adapters per liter for hot applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Barb Adapter |
CSA B137.5 |
| 3/8" - 1/2" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
$$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold
applications and a maximum of 16 adapters per liter for hot applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Supply Adapter |
ASTM F877/F1807 |
| 3/4" - 1" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
$$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold
applications and a maximum of 16 adapters per liter for hot applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Supply Adapter |
CSA B137.5 |
| 3/4" - 1" | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
= Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with
the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with
LEAD-FREE MANABLOC® manifold.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
$$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold
applications and a maximum of 16 adapters per liter for hot applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
Apollo® |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
Vanguard |
ASTM F876/F877 |
| 1/4" – 2" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
ViegaPEX |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# * ^ ˘ ± ++ [G] |
PEX 5006 |
Viega FostaPEX |
ASTM F876/F877 |
| 1/2" - 1" | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
± Certified for tubing with a black inner layer and red or natural outer layer.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# * ^ ˘ ± ++ [G] |
PEX |
Viega FostaPEX |
CSA B137.5 |
| 1/2" - 1" | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
± Certified for tubing with a black inner layer and red or natural outer layer.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# $ * ^ ˘ § ++ [G] |
PEX 5006 |
ViegaPEX Barrier |
ASTM F876/F877 |
| 5/16" - 1 1/2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
$ This product is barrier tubing.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# $ * ^ ˘ § ++ [G] |
PEX |
ViegaPEX Barrier |
CSA B137.5 |
| 5/16" - 1 1/2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
$ This product is barrier tubing.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
ViegaPEX Riser |
ASTM F876/F877 |
| 1/4" - 3/8" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# % * ^ ~ ˘ § ** +++ [G] |
PEX 5306 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# % & * ^ ~ ˘ § ** +++ [G] |
PEX 5306 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
& ViegaPEX ULTRA with exterior adhesive layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# % * ^ ~ ˘ § ** +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Tubing# % & * ^ ~ ˘ § ** +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
& ViegaPEX ULTRA with exterior adhesive layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Ennest, Germany
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
ASTM F877 |
|
Model # 2812.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2814.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.3ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818ZL |
|||
| 3/8" - 1" | |||
|
Model # 2825.5ZL |
|||
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
ASTM F877 |
|
Model # 2813.5ZL |
|||
| 1/2" - 1" | |||
|
Model # 2816ZL |
|||
| 1/2" - 1" | |||
|
Model # 2818ZL |
|||
| 1/2" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
CSA B137.5 |
|
Model # 2812.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2814.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.3ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818ZL |
|||
| 3/8" - 1" | |||
|
Model # 2825.5ZL |
|||
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
CSA B137.5 |
|
Model # 2813.5ZL |
|||
| 1/2" - 1" | |||
|
Model # 2816ZL |
|||
| 1/2" - 1" | |||
|
Model # 2818ZL |
|||
| 1/2" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Facility : Grossheringen, Germany
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
ASTM F877 |
|
Model # 2811ZL |
|||
| 3/8" – 2" | |||
|
Model # 2812ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813.1ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813.2ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813.5ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813PZL |
|||
| 3/8" – 2" | |||
|
Model # 2814.5ZL |
|||
| 3/8" – 2" | |||
|
Model # 2814ZL |
|||
| 3/8" – 2" | |||
|
Model # 2815ZL |
|||
| 3/8" – 2" | |||
|
Model # 2816ZL |
|||
| 3/8" – 2" | |||
|
Model # 2818ZL |
|||
| 3/8" – 2" | |||
|
Model # 2856ZL |
|||
| 3/8" – 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
CSA B137.5 |
|
Model # 2811ZL |
|||
| 3/8" - 2" | |||
|
Model # 2812ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813.1ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813.2ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813.5ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813PZL |
|||
| 3/8" - 2" | |||
|
Model # 2814.5ZL |
|||
| 3/8" - 2" | |||
|
Model # 2814ZL |
|||
| 3/8" - 2" | |||
|
Model # 2815ZL |
|||
| 3/8" - 2" | |||
|
Model # 2816ZL |
|||
| 3/8" - 2" | |||
|
Model # 2818ZL |
|||
| 3/8" - 2" | |||
|
Model # 2856ZL |
|||
| 3/8" - 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 264
Processing time was 1 seconds