These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=72320&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Viega LLC. | |
| The Epic Center | |
| 301 North Main Street | |
| Suite 900 | |
| Wichita, KS 67202-4809 | |
| United States | |
| 800-774-5237 |
Facility : # 1 Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
MLTPL |
PEX Press Stub-Out |
ASTM F877 |
|
Model # 28200ZL |
|||
| 92221 PEX Press Copper Tub Els, 1/2" PEX x 1/2" C (6" x 3") | |||
|
Model # 28201ZL |
|||
| 92421 PEX Press Copper Stub-Out Elbows, 1/2" PEX x 1/2" C (3.5" x 8") | 92406 PEX Press Copper Stub-Out Elbows, 3/8" PEX x 1/2" C (3.5" x 8") | 92441 PEX Press Copper Stub-Out Elbows, 3/4" PEX x 3/4" C (3.5" x 8") | |
|
Model # 28202ZL |
|||
| 92609 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (8") | 92616 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (15") | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
PEX Press Stub-Out |
CSA B137.5 |
|
Model # 28200ZL |
|||
| 92221 PEX Press Copper Tub Els, 1/2" PEX x 1/2" C (6" x 3") | |||
|
Model # 28201ZL |
|||
| 92406 PEX Press Copper Stub-Out Elbows, 3/8" PEX x 1/2" C (3.5" x 8") | 92421 PEX Press Copper Stub-Out Elbows, 1/2" PEX x 1/2" C (3.5" x 8") | 92441 PEX Press Copper Stub-Out Elbows, 3/4" PEX x 3/4" C (3.5" x 8") | |
|
Model # 28202ZL |
|||
| 92609 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (8") | 92616 PEX Press Copper Straight Stub-Out, 1/2" PEX x 1/2" C (15") | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : McPherson, KS
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings* ˘ § +++ [G] |
PPSU |
Poly PEX Press |
ASTM F877 |
| 3/8" – 1 1/2" Press Couplings (models V5615) | |||
| 3/8" – 1 1/2" Press Elbows (models V5616) | |||
| 3/8" – 1 1/2" Press Plugs (models V5656) | |||
| 3/8" – 1 1/2" Press Reducing Tees (models V5618) | |||
| 3/8" – 1 1/2" Press Tees (models V5618) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings* ˘ § +++ [G] |
PPSU |
Poly PEX Press |
CSA B137.5 |
| 3/8" – 1 1/2" Press Couplings (models V5615) | |||
| 3/8" – 1 1/2" Press Elbows (models V5616) | |||
| 3/8" – 1 1/2" Press Tees (models V5618) | |||
| 3/8" – 1 1/2" Press Reducing Tees (models V5618) | |||
| 3/8" – 1 1/2" Press Plugs (models V5656) | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX 5006 |
Apollo® |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX |
Apollo® |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX 5006 |
Vanguard |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX |
Vanguard |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ ˘ § +++ [G] |
PEX |
ViegaPEX |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing$ * ^ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX Barrier |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
$ This product is barrier tubing.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing$ * ^ ˘ § +++ [G] |
PEX |
ViegaPEX Barrier |
CSA B137.5 |
| >=1/4" SDR 9 | |||
$ This product is barrier tubing.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˇ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
ˇ This is a solid wall black tubing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* ^ ˇ ˘ § +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| >=1/4" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
ˇ This is a solid wall black tubing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! * ^ ~ ˘ § +++ [G] |
PEX 5006 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| >=1/4" SDR 9 | |||
! Pipe has a black inner layer with a red, white, or blue co-extruded outer layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing! * ^ ~ ˘ § +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| >=1/4" SDR 9 | |||
! Pipe has a black inner layer with a red, white, or blue co-extruded outer layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
MT Insert-Crimp Fittings |
ASTM F2159 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
MT Insert-Crimp Fittings |
CSA B137.5 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
PolyAlloy Crimp Fittings |
ASTM F2159 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
PolyAlloy Crimp Fittings |
CSA B137.5 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
Vanguard |
ASTM F2159 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
Vanguard |
CSA B137.5 |
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings+++ [G] |
MLTPL |
Viega PPSU Supply Adapter |
ASTM F877/F2159 |
| 3/4" - 1" | |||
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ ## ++ *** [G] |
PLS |
LEAD-FREE MANABLOC® |
ASTM F877 |
| 3/8" - 1" CTS | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
## Certified for a maximum of 36 ports. Manifold Certification includes brass and bronze
Manabloc Barb Adapters using a maximum of 16 adapters for hot applications and a maximum
of 22 adapters for cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
*** LEAD-FREE MANABLOC® Manifold tested for chemical extraction, dimensions, hydrostatic
burst pressure at 73°F and 180°F, hydrostatic sustained pressure at 180°F, thermocyclic,
and excessive temperature and pressure capability.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ ## ++ *** [G] |
PLS |
LEAD-FREE MANABLOC® |
CSA B137.5 |
| 3/8" - 1" CTS | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
## Certified for a maximum of 36 ports. Manifold Certification includes brass and bronze
Manabloc Barb Adapters using a maximum of 16 adapters for hot applications and a maximum
of 22 adapters for cold applications.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
*** LEAD-FREE MANABLOC® Manifold tested for chemical extraction, dimensions, hydrostatic
burst pressure at 73°F and 180°F, hydrostatic sustained pressure at 180°F, thermocyclic,
and excessive temperature and pressure capability.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65152 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 2 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65152 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 2 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65153 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 3 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65153 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 3 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65154 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65154 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* § µ %% +++ [G] |
PSU |
65104 PolyAlloy Manifold |
ASTM F877/F2159 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65104 PolyAlloy Manifold |
CSA B137.5 |
| 3/4" x 1/2" (PEX Crimp), 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65254 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65254 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 3/4" x 1/2" (PEX Crimp), 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65256 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 1/2" (PEX Crimp), 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65256 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 1/2" (PEX Crimp), 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65206 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 1/2" (PEX Crimp), 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65206 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 1/2" (PEX Crimp), 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65258 PolyAlloy Manifold |
ASTMF877/F2159 |
| 1" x 1/2" (PEX Crimp), 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ %% +++ [G] |
PSU |
65258 PolyAlloy Manifold |
CSA B137.5 |
| 1" x 1/2" (PEX Crimp), 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
%% PolyAlloy Manifold meets requirements of ASTM F877/F2159 and CSA B137.5. Barb
configurations meet the requirements of ASTM F2159.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [1] [G] |
MLTPL |
50023 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Formerly MRXDC34. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [1] [G] |
MLTPL |
50023 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Formerly MRXDC34. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [2] [G] |
MLTPL |
50133 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [2] Formerly MRXDC24. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [2] [G] |
MLTPL |
50133 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [2] Formerly MRXDC24. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50141 Manabloc PolyAlloy Supply Adapter |
ASTM F877/F2159 |
| 3/4" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50141 Manabloc PolyAlloy Supply Adapter |
CSA B137.5 |
| 3/4" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50151 Manabloc PolyAlloy Supply Adapter |
ASTM F877/F2159 |
| 1" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
50151 Manabloc PolyAlloy Supply Adapter |
CSA B137.5 |
| 1" Supply Adapter | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51123 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51123 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 3/8" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51133 Manabloc PolyAlloy Barb Adapter |
ASTM F877/F2159 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ § µ ż ++ [G] |
MLTPL |
51133 Manabloc PolyAlloy Barb Adapter |
CSA B137.5 |
| 1/2" Barb Adapter (PEX x MANABLOC) | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. ż Certified as a component of a manifold for a maximum of 22 adapters per liter for hot or cold applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659292 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 2 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659292 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 2 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659302 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 3 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659302 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 3 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659312 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659312 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets,through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659322 Poly PEX Press Manifold |
ASTM F877 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659322 Poly PEX Press Manifold |
CSA B137.5 |
| 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659332 Poly PEX Press Manifold |
ASTM F877 |
| 1"xľ" PEX Crimp x ˝" PEX Crimp, 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659332 Poly PEX Press Manifold |
CSA B137.5 |
| 1"xľ" PEX Crimp x ˝" PEX Crimp, 4 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659342 Poly PEX Press Manifold |
ASTM F877 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659342 Poly PEX Press Manifold |
CSA B137.5 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659352 Poly PEX Press Manifold |
ASTM F877 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659352 Poly PEX Press Manifold |
CSA B137.5 |
| 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, closed | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659362 Poly PEX Press Manifold |
ASTM F877 |
| 1" PEX Crimp x 1/2" PEX Crimp, 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Manifold* ˘ § µ +++ [G] |
PSU |
659362 Poly PEX Press Manifold |
CSA B137.5 |
| 1" PEX Crimp x 1/2" PEX Crimp, 8 outlets, through | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and
Viega FostaPEX tubing only.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Barb Adapter |
ASTM F877/F1807 |
| 3/8" - 1/2" | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. $$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold applications and a maximum of 16 adapters per liter for hot applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Barb Adapter |
CSA B137.5 |
| 3/8" - 1/2" | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. $$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold applications and a maximum of 16 adapters per liter for hot applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Supply Adapter |
ASTM F877/F1807 |
| 3/4" - 1" | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. $$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold applications and a maximum of 16 adapters per liter for hot applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Misc. Proc. Devices/Comp.* = ˘ µ $$ ++ [G] |
MLTPL |
Manabloc Supply Adapter |
CSA B137.5 |
| 3/4" - 1" | |||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. = Meets performance requirements of ASTM F877 and CSA B137.5 when tested as a system with the LEAD-FREE MANABLOC® manifold. Adapters may only be used in conjunction with LEAD-FREE MANABLOC® manifold. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. µ Product tested and Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only. $$ Certified as a component of a manifold for a maximum of 22 adapters per liter for cold applications and a maximum of 16 adapters per liter for hot applications. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
Apollo® |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
Vanguard |
ASTM F876/F877 |
| 1/4" – 2" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
ViegaPEX |
ASTM F876/F877 |
| 1/4" - 2" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# * ^ ˘ ± ++ [G] |
PEX 5006 |
Viega FostaPEX |
ASTM F876/F877 |
| 1/2" - 1" | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ± Certified for tubing with a black inner layer and red or natural outer layer. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing# * ^ ˘ ± ++ [G] |
PEX |
Viega FostaPEX |
CSA B137.5 |
| 1/2" - 1" | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ± Certified for tubing with a black inner layer and red or natural outer layer. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing# $ * ^ ˘ § ++ [G] |
PEX 5006 |
ViegaPEX Barrier |
ASTM F876/F877 |
| 5/16" - 1 1/2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing# $ * ^ ˘ § ++ [G] |
PEX |
ViegaPEX Barrier |
CSA B137.5 |
| 5/16" - 1 1/2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Tubing* @ ^ § +++ [G] |
PEX 5006 |
ViegaPEX Riser |
ASTM F876/F877 |
| 1/4" - 3/8" SDR 9 | |||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ Blue, natural, red, and white.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# % * ^ ~ ˘ § ** +++ [G] |
PEX 5306 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# % & * ^ ~ ˘ § ** +++ [G] |
PEX 5306 |
ViegaPEX ULTRA |
ASTM F876/F877 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
& ViegaPEX ULTRA with exterior adhesive layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# % * ^ ~ ˘ § ** +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Tubing# % & * ^ ~ ˘ § ** +++ [G] |
PEX |
ViegaPEX ULTRA |
CSA B137.5 |
| 3/8" - 2" SDR 9 | |||
# Pipe tested as a system using VI fittings manufactured by Viega LLC.
Installation/assembly instructions titled “Installation Guidelines for Viega Insert
Fittings Systems”, most current edition.
% This product is also Certified for single-layer, solid wall black.
& ViegaPEX ULTRA with exterior adhesive layer.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Formerly Vanex Ultra.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
radiant heating system made in accordance with the current version of the ASTM F877
standard intended for a maximum 100 psi water service and a maximum working temperature
of 180°F. System components consist of tubing and/or fittings. To be installed in
accordance with manufacturer’s instructions and the latest edition of the Uniform
Plumbing Code.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Ennest, Germany
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
ASTM F877 |
|
Model # 2812.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2814.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.3ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818ZL |
|||
| 3/8" - 1" | |||
|
Model # 2825.5ZL |
|||
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
ASTM F877 |
|
Model # 2813.5ZL |
|||
| 1/2" - 1" | |||
|
Model # 2816ZL |
|||
| 1/2" - 1" | |||
|
Model # 2818ZL |
|||
| 1/2" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
CSA B137.5 |
|
Model # 2812.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2814.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.2ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818.3ZL |
|||
| 3/8" - 1" | |||
|
Model # 2818ZL |
|||
| 3/8" - 1" | |||
|
Model # 2825.5ZL |
|||
| 3/8" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
CSA B137.5 |
|
Model # 2813.5ZL |
|||
| 1/2" - 1" | |||
|
Model # 2816ZL |
|||
| 1/2" - 1" | |||
|
Model # 2818ZL |
|||
| 1/2" - 1" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Facility : Grossheringen, Germany
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
ASTM F877 |
|
Model # 2811ZL |
|||
| 3/8" – 2" | |||
|
Model # 2812ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813.1ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813.2ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813.5ZL |
|||
| 3/8" – 2" | |||
|
Model # 2813PZL |
|||
| 3/8" – 2" | |||
|
Model # 2814.5ZL |
|||
| 3/8" – 2" | |||
|
Model # 2814ZL |
|||
| 3/8" – 2" | |||
|
Model # 2815ZL |
|||
| 3/8" – 2" | |||
|
Model # 2816ZL |
|||
| 3/8" – 2" | |||
|
Model # 2818ZL |
|||
| 3/8" – 2" | |||
|
Model # 2856ZL |
|||
| 3/8" – 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Fittings˘ § +++ [G] |
Bronze |
Lead Free Pureflow PEX Press Fittings |
CSA B137.5 |
|
Model # 2811ZL |
|||
| 3/8" - 2" | |||
|
Model # 2812ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813.1ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813.2ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813.5ZL |
|||
| 3/8" - 2" | |||
|
Model # 2813PZL |
|||
| 3/8" - 2" | |||
|
Model # 2814.5ZL |
|||
| 3/8" - 2" | |||
|
Model # 2814ZL |
|||
| 3/8" - 2" | |||
|
Model # 2815ZL |
|||
| 3/8" - 2" | |||
|
Model # 2816ZL |
|||
| 3/8" - 2" | |||
|
Model # 2818ZL |
|||
| 3/8" - 2" | |||
|
Model # 2856ZL |
|||
| 3/8" - 2" | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 145
Processing time was 0 seconds

