These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=C0026803&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Tribal Manufacturing, Inc. | |
| 450 Leggitt Road | |
| Marshall, MI 49068 | |
| United States | |
| 800-447-9513 | |
| 269-781-3901 | |
| Visit this company's website |
Facility : Marshall, MI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings* + ˘ § +++ [G] |
Brass (3) Places |
 |
ASTM F877 |
|
Adapter (PEX x Female Sweat) |
|||
| 3/8" x 1/2" [F19E34] | 1/2" x 1/2" [F19E44] | 3/4" x 1/2" [F19E64] | 3/4" x 3/4" [F19E66] |
| 1" x 1" [F19E88] | |||
|
Adapter (PEX x PB) |
|||
| 3/8" x 3/8" [F18E33] | 1/2" x 1/2" [F18E44] | 3/4" X 3/4" [F18E66] | 1" x 1" [F18E88] |
|
Adapter (PEX x Special Male Sweat) |
|||
| 1/2" x 1/2" [F33E44] | |||
|
Adapter (PEX x Stub) |
|||
| 3/8" x 1/2" [F03E34] | 1/2" x 1/2" [F03E44] | 1/2" x 3/4" [F03E46] | 3/4" x 3/4" [F03E66] |
|
Adapter Assy (PEX x FPT Swivel) |
|||
| 3/4" x 3/4" [F24E66] | |||
|
Adapter Assy (PEX x Termination) |
|||
| 1/2" x 3/4" [F24E46] | |||
|
Adapters (PEX x FPT) |
|||
| 3/8" x 1/8" [F09E31] | 3/8" x 1/2" [F09E34] | 1/2" x 1/8" [F09E41] | 1/2" x 1/2" [F09E44] |
| 1/2" x 3/4" [F09E46] | 3/4" x 3/4" [F09E66] | 3/4" x 1" [F09E68] | |
|
Adapters (PEX x M Sweat) |
|||
| 3/8" x 3/8" [F02E33] | 3/8" x 1/2" [F02E34] | 1/2" x 3/8" [F02E43] | 1/2" x 1/2" [F02E44] |
| 3/4" x 3/4" [F02E66] | 1" x 1" [F02E88] | ||
|
Adapters (PEX x MPT) |
|||
| 3/8" x 3/8" [F10E33] | 3/8" x 1/2" [F10E34] | 1/2" x 1/2" [F10E44] | 1/2" x 3/4" [F10E46] |
| 3/4" x 1/2" [F10E64] | 3/4" x 3/4" [F10E66] | 1" x 3/4" [F10E86] | 1" x 1" [F10E88] |
|
Assembly (PEX x FPT - straight) |
|||
| 3/8" x 1/2" [F04E34] | 1/2" X 1/2" [F04E44] | ||
|
Connectors (PEX x PEX) |
|||
| 3/8" x 3/8" [F01E33] | 1/2" x 3/8" [F01E43] | 1/2" x 1/2" [F01E44] | 3/4" x 1/2" [F01E64] |
| 3/4" x 3/4" [F01E66] | 1" x 1/2" [F01E84] | 1" x 3/4" [F01E86] | 1" x 1" [F01E88] |
|
Elbow (MPT x MPT) |
|||
| 3/8" x 1/2" [F51E34] | 1/2" x 1/2" [F51E44] | ||
|
Elbow (PEX x MPT) |
|||
| 3/8" x 1/4" [F22E32] | 3/8" x 3/8" [F22E33] | 1/2" x 3/8" [F22E43] | 1/2" x 1/2" [F22E44] |
|
Elbow (PEX x PEX) |
|||
| 3/8" x 3/8" [F07E33] | 3/8" x 1/2" [F07E34] | 1/2" x 1/2" [F07E44] | 3/4" x 1/2" [F07E64] |
| 3/4" x 3/4" [F07E66] | 1" x 1/2" [F07E84] | 1" x 1" [F07E88] | |
|
Female Pipe Straight Adapter (PEX x FP) |
|||
| 1" x 1" [F09E88] | |||
|
Male Pipe Elbow Adapter (PEX x MP) |
|||
| 3/8" x 1/2" [F22E34] | 1/2" x 3/4" [F22E46] | 3/4" x 3/4" [F22E66] | |
|
Male Pipe Straight Adapter (PEX x MP) |
|||
| 3/4" x 1" [F10E68] | 1" x 3/4" [F10E86] | ||
|
Nipple (Female Flare Swivel) |
|||
| 3/8" X 3/8" [F11E33] | 1/2" X 1/2" [F11E44] | ||
|
Plug (PEX) |
|||
| 3/8" [F08E3] | 1/2" [F08E4] | 3/4" [F08E6] | 1" [F08E8] |
|
Swivel Assembly (PEX x Female Flare Swivel) |
|||
| 3/8" x 3/8" [F12E33] | 1/2" x 1/2" [F12E44] | ||
|
Tee (PEX x PEX x PEX) |
|||
| 3/8" x 3/8" x 3/8" [F06E333] | 3/8" x 3/8" x 1/2" [F06E334] | 1/2" x 3/8" x 3/8" [F06E433] | 1/2" x 3/8" x 1/2" [F06E434] |
| 1/2" x 1/2" x 3/8" [F06E443] | 1/2" x 1/2" x 1/2" [F06E444] | 1/2" x 1/2" x 3/4" [F06E446] | 3/4" x 1/2" x 1/2" [F06E644] |
| 3/4" x 1/2" x 3/4" [F06E646] | 3/4" x 3/4" x 3/8" [F06E663] | 3/4" x 3/4" x 1/2" [F06E664] | 3/4" x 3/4" x 3/4" [F06E666] |
| 1" x 1/2" x 3/4" [F06E846] | 1" x 1/2" x 1" [F06E848] | 1" x 3/4" x 1/2" [F06E864] | 1" x 3/4" x 3/4" [F06E866] |
| 1" x 3/4" x 1" [F06E868] | 1" x 1" x 3/4" [F06E886] | 1" x 1" x 1" [F06E888] | |
|
Tee Adapter (PEX x PEX x MP) |
|||
| 1/2" x 1/2" x 1/2" [F57E444] | |||
|
Tee Adapter (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1" x 3/4" [F06E884] | ||
|
Termination Elbow (PEX x Termination) |
|||
| 3/8" x 1/2" [F20E34] | 1/2" x 1/2" [F20E44] | ||
|
Termination Elbow Assy (PEX x Termination) |
|||
| 3/8" x 1/2" [F21E34] | 1/2" x 1/2" [F21E44] | ||
* Accepted by NSF for use in residential and commercial construction,
including manufactured housing.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ** +++ [G] |
Brass (3) Places |
|
ASTM F1807 |
|
Adapter (PEX x Female Sweat) |
|||
| 3/8" x 1/2" [F19E34] | 1/2" x 1/2" [F19E44] | 1/2" x 3/4" [F19E46] | 3/4" x 1/2" [F19E64] |
| 3/4" x 3/4" [F19E66] | 3/4" x 1" [F19E68] | 1" x 1" [F19E88] | |
|
Adapter (PEX x PB) |
|||
| 3/8" x 3/8" [F18E33] | 1/2" x 1/2" [F18E44] | 3/4" x 3/4" [F18E66] | 1" x 1" [F18E88] |
|
Adapter (PEX x Special Male Sweat) |
|||
| 1/2" x 1/2" [F33E44] | |||
|
Adapter (PEX x Stub) |
|||
| 3/8" x 1/2" [F03E34] | 1/2" x 1/2" [F03E44] | 1/2" x 3/4" [F03E46] | 3/4" x 3/4" [F03E66] |
|
Adapter Assy (PEX x FPT Swivel) |
|||
| 3/4" x 3/4" [F24E66] | |||
|
Adapter Assy (PEX x Termination) |
|||
| 1/2" x 3/4" [F24E46] | |||
|
Adapters (PEX x FPT) |
|||
| 3/8" x 1/8" [F09E31] | 3/8" x 1/2" [F09E34] | 1/2" x 1/8" [F09E41] | 1/2" x 1/2" [F09E44] |
| 1/2" x 3/4" [F09E46] | 3/4" x 3/4" [F09E66] | 3/4" x 1" [F09E68] | |
|
Adapters (PEX x M Sweat) |
|||
| 3/8" x 3/8" [F02E33] | 3/8" x 1/2" [F02E34] | 1/2" x 3/8" [F02E43] | 1/2" x 1/2" [F02E44] |
| 1/2" x 3/4" [F02E46] | 3/4" x 1/2" [F02E64] | 3/4" x 3/4" [F02E66] | 3/4" x 1" [F02E68] |
| 1" x 3/4" [F02E86] | 1" x 1" [F02E88] | ||
|
Adapters (PEX x MPT) |
|||
| 3/8" x 3/8" [F10E33] | 3/8" x 1/2" [F10E34] | 1/2" x 1/2" [F10E44] | 1/2" x 3/4" [F10E46] |
| 3/4" x 1/2" [F10E64] | 3/4" x 3/4" [F10E66] | 1" x 1" [F10E88] | |
|
Connectors (PEX x PEX) |
|||
| 3/8" x 3/8" [F01E33] | 1/2" x 3/8" [F01E43] | 1/2" x 1/2" [F01E44] | 3/4" x 1/2" [F01E64] |
| 3/4" x 3/4" [F01E66] | 1" x 1/2" [F01E84] | 1" x 3/4" [F01E86] | 1" x 1" [F01E88] |
|
Coupler (PEX x PEX) |
|||
| 1" x 1/2" [F01E84] | |||
|
Elbow (MPT x MPT) |
|||
| 3/8" x 1/2" [F51E34] | 1/2" x 1/2" [F51E44] | ||
|
Elbow (PEX x Barb x Female Sweat) |
|||
| 3/4" x 3/4" [F15E66] | |||
|
Elbow (PEX x Barb x Male Sweat) |
|||
| 3/4" x 3/4" [F14E66] | |||
|
Elbow (PEX x MPT) |
|||
| 3/8" x 1/4" [F22E32] | 3/8" x 3/8" [F22E33] | 1/2" x 3/8" [F22E43] | 1/2" x 1/2" [F22E44] |
|
Elbow (PEX x PEX) |
|||
| 3/8" x 3/8" [F07E33] | 3/8" x 1/2" [F07E34] | 1/2" x 1/2" [F07E44] | 3/4" x 1/2" [F07E64] |
| 3/4" x 3/4" [F07E66] | 1" x 1/2" [F07E84] | 1" x 3/4" [F07E86] | 1" x 1" [F07E88] |
|
Nipple (Female Flare Swivel) |
|||
| 3/8" x 3/8" [F11E33] | 1/2" x 1/2" [F11E44] | ||
|
Plug (PEX) |
|||
| 3/8" [F08E3] | 1/2" [F08E4] | 3/4" [F08E6] | 1" [F08E8] |
|
Swivel Assembly (PEX x FPT - Straight) |
|||
| 3/8" x 1/2" [F04E34] | 1/2" x 1/2" [F04E44] | ||
|
Swivel Assembly (PEX x Female Flare Swivel) |
|||
| 3/8" x 3/8" [F12E33] | 1/2" x 1/2" [F12E44] | ||
|
Tee (PEX X PEX X Female NPT) |
|||
| 1/2" x 1/2" x 1/8" [F65E441] | |||
|
Tee (PEX x PEX x PEX) |
|||
| 3/8" x 3/8" x 3/8" [F06E333] | 3/8" x 3/8" x 1/2" [F06E334] | 1/2" x 3/8" x 3/8" [F06E433] | 1/2" x 1/2" x 3/8" [F06E443] |
| 1/2" x 1/2" x 1/2" [F06E444] | 1/2" x 1/2" x 3/4" [F06E446] | 3/4" x 1/2" x 1/2" [F06E644] | 3/4" x 1/2" x 3/4" [F06E646] |
| 3/4" x 3/4" x 3/8" [F06E663] | 3/4" x 3/4" x 1/2" [F06E664] | 3/4" x 3/4" x 3/4" [F06E666] | 3/4" x 3/4" x 1" [F06E846] |
| 1" x 1/2" x 1" [F06E848) | 1" x 3/4" x 1/2" [F06E864] | 1" x 3/4" x 3/4" [F06E866] | 1" x 1" x 1/2" [F06E868] |
| 1" x 1" x 3/4" [F06E886] | 1" x 1" x 1" [F06E888] | ||
|
Tee Adapter (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1" x 3/4" [F06E884] | ||
|
Termination Elbow (PEX x Termination) |
|||
| 3/8" x 1/2" [F20E34] | 1/2" x 1/2" [F20E44] | ||
|
Termination Elbow Assy (PEX x Termination) |
|||
| 3/8" x 1/2" [F21E34] | 1/2" x 1/2" [F21E44] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
from bearing the NSF Mark. The NSF Mark will appear on the box containing
the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings§ +++ [G] |
MLTPL |
|
ASTM F1960 |
|
Adapter (PEX x Female NPT) |
|||
| 1/2" x 3/4" [F112E44] | 1/2" x 3/4" [F112E46] | 5/8" x 3/4" [F112E56] | 3/4" x 1/2" [F112E64] |
| 3/4" x 3/4" [F112E66] | 3/4" x 1" [F112E68] | 1" x 3/4" [F112E86] | 1" x 1" [F112E88] |
| 1 1/4" x 1 1/4" [F112E1010] | 1 1/2" x 1 1/2" [F112E1212] | 2" x 2" [F112E1616] | |
|
Adapter (PEX x Female Sweat CU) |
|||
| 3/8" x 1/2" [F105E34] | 1/2" x 1/2" [F105E44] | 1/2" x 3/4" [F105E46] | 5/8" x 1/2" [F105E54] |
| 5/8" x 3/4" [F105E56] | 3/4" x 1/2" [F105E64] | 3/4" x 3/4" [F105E66] | 3/4" x 1" [F105E68] |
| 1" x 1" [F105E88] | 1 1/4" x 1 1/4" [F105E1010] | 1 1/2" x 1 1/2" [F105E1212] | 2" x 2" [F105E1616] |
|
Adapter (PEX x Male CU) |
|||
| 3/8" x 1/2" [F80E34] | 1/2" x 1/2" [F80E44] | 1/2" x 3/4" [F80E46] | 5/8" x 1/2" [F80E54] |
| 5/8" x 3/4" [F80E56] | 3/4" x 1/2" [F80E64] | 3/4" x 3/4" [F80E66] | 3/4" x 1" [F80E68] |
| 1" x 1" [F80E88] | 1 1/4" x 1 1/4" [F80E1010] | 1 1/4" x 1 1/4" [F88E1010] | 1 1/2" x 1 1/2" [F80E1212] |
| 1 1/2" x 1 1/2" [F88E1212] | 2" x 2" [F80E1616] | 2" x 2" [F88E1616] | |
|
Coupling |
|||
| 3/8" x 3/8" [F87E33] | 3/8" x 1/2" [F87E43] | 1/2" x 1/2" [F87E44] | 5/8" x 5/8" [F87E55] |
| 1/2" x 3/4" [F87E64] | 3/4" x 3/4" [F87E66] | 3/4" x 1" [F87E86] | 1" x 1" [F87E88] |
| 2" x 2" [F87E1616] | |||
|
Elbow (PEX x F Sweat) |
|||
| 3/4" x 3/4" [F315E66] | |||
|
Elbow (PEX x M Sweat) |
|||
| 3/4" x 3/4" [F314E66] | |||
|
Elbow (PEX x MNPT) |
|||
| 1/2" x 1/2" [F322E44] | |||
|
Elbow (PEX x PEX) |
|||
| 1/2" x 1/2" [F307E44] | 3/4" x 3/4" [F307E66] | 1" x 1" [F307E88] | |
|
Male Pipe Adapter |
|||
| 3/8" x 1/2" [F88E34] | 1/2" x 1/2" [F88E44] | 1/2" x 3/4" [F88E46] | 5/8" x 3/4" [F88E56] |
| 3/4" x 1/2" [F88E64] | 3/4" x 3/4" [F88E66] | 3/4" x 1" [F88E68] | 1" x 3/4" [F88E86] |
| 1" x 1" [F88E88] | |||
|
PEX-PB Transition |
|||
| 1/2" x 1/2" [F107E44] | 3/4" x 3/4" [F107E66] | ||
|
PEX-PE Transition |
|||
| 1" x 3/4" [F111E86] | 1" x 1" [F111E88] | ||
|
PEX-R20 Thread Adapter |
|||
| 3/4" x 3/4" [F131E66] | |||
|
Plug (PEX) |
|||
| 3/8" [F106E3] | 1/2" [F106E4] | 3/4" [F106E6] | 1" [F106E8] |
|
Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" [F306E444] | 1/2" x 1/2" x 3/4" [F306E446] | 3/4" x 1/2" x 1/2" [F306E644] | 3/4" x 1/2" x 3/4" [F306E646] |
| 3/4" x 3/4" x 1/2" [F306E664] | 3/4" x 3/4" x 3/4" [F306E666] | 3/4" x 3/4" x 1" [F306E668] | 1" x 3/4" x 3/4" [F306E866] |
| 1" x 1" x 1/2" [F306E884] | 1" x 1" x 3/4" [F306E886] | 1" x 1" x 1" [F306E888] | |
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ˘ § ± [G] |
MLTPL |
|
ASTM F1960 |
|
Adapter (PEX x Faucet) |
|||
| 3/8" (F108E3) | 1/2" (F108E4) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
± These fittings are NSF Certified faucet components. The assembly of components does not
constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if
the assembled faucet appears in NSF Listing.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ** +++ [G] |
Brass (3) Places |
|
CSA B137.5 |
|
Adapter (PEX x Female Sweat) |
|||
| 3/8" x 1/2" [F19E34] | 1/2" x 1/2" [F19E44] | 1/2" x 3/4" [F19E46] | 3/4" x 1/2" [F19E64] |
| 3/4" x 3/4" [F19E66] | 3/4" x 1" [F19E68] | 1" x 1" [F19E88] | |
|
Adapter (PEX x PB) |
|||
| 3/8" x 3/8" [F18E33] | 1/2" x 1/2" [F18E44] | 3/4" X 3/4" [F18E66] | 1" x 1" [F18E88] |
|
Adapter (PEX x Special Male Sweat) |
|||
| 1/2" x 1/2" [F33E44] | |||
|
Adapter (PEX x Stub) |
|||
| 3/8" x 1/2" [F03E34] | 1/2" x 1/2" [F03E44] | 1/2" x 3/4" [F03E46] | 3/4" x 3/4" [F03E66] |
|
Adapter Assy (PEX x FPT Swivel) |
|||
| 3/4" x 3/4" [F24E66] | |||
|
Adapter Assy (PEX x Termination) |
|||
| 1/2" x 3/4" [F24E46] | |||
|
Adapters (PEX x FPT) |
|||
| 3/8" x 1/8" [F09E31] | 3/8" x 1/2" [F09E34] | 1/2" x 1/8" [F09E41] | 1/2" x 1/2" [F09E44] |
| 1/2" x 3/4" [F09E46] | 3/4" x 1/2" [F09E68] | 3/4" x 3/4" [F09E66] | |
|
Adapters (PEX x M Sweat) |
|||
| 3/8" x 3/8" [F02E33] | 3/8" x 1/2" [F02E34] | 1/2" x 3/8" [F02E43] | 1/2" x 1/2" [F02E44] |
| 1/2" x 3/4" [F02E46] | 3/4" x 1/2" [F02E64] | 3/4" x 3/4" [F02E66] | 3/4" x 1" [F02E68] |
| 1" x 3/4" [F02E86] | 1" x 1" [F02E88] | ||
|
Adapters (PEX x MPT) |
|||
| 3/8" x 3/8" [F10E33] | 3/8" x 1/2" [F10E34] | 1/2" x 1/2" [F10E44] | 1/2" x 3/4" [F10E46] |
| 3/4" x 1/2" [F10E64] | 3/4" x 3/4" [F10E66] | 1" x 1" [F10E88] | |
|
Connectors (PEX x PEX) |
|||
| 3/8" x 3/8" [F01E33] | 1/2" x 3/8" [F01E43] | 1/2" x 1/2" [F01E44] | 3/4" x 1/2" [F01E64] |
| 3/4" x 3/4" [F01E66] | 1" x 3/4" [F01E86] | 1" x 1/2" [F01E84] | 1" x 1" [F01E88] |
|
Coupler (PEX x PEX) |
|||
| 1" x 1/2" [F01E84] | |||
|
Elbow (MPT x MPT) |
|||
| 3/8" x 1/2" [F51E34] | 1/2" x 1/2" [F51E44] | ||
|
Elbow (PEX x MPT) |
|||
| 3/8" x 3/8" [F22E33] | 3/8" x 1/4" [F22E32] | 1/2" x 3/8" [F22E43] | 1/2" x 1/2" [F22E44] |
|
Elbow (PEX x PEX) |
|||
| 3/8" x 3/8" [F07E33] | 3/8" x 1/2" [F07E34] | 1/2" x 1/2" [F07E44] | 3/4" x 1/2" [F07E64] |
| 3/4" x 3/4" [F07E66] | 1" x 1/2" [F07E84] | 1" x 3/4" [F07E86] | 1" x 1" [F07E88] |
|
Female Pipe Straight Adapter (PEX x FP) |
|||
| 1" x 1" [F09E88] | |||
|
Male Pipe Straight Adapter (PEX x MP) |
|||
| 3/4" x 1" [F10E68] | 1" x 3/4" [F10E86] | ||
|
Nipple (Female Flare Swivel) |
|||
| 3/8" x 3/8" [F11E33] | 1/2" x 1/2" [F11E44] | ||
|
Plug (PEX) |
|||
| 3/8" [F08E3] | 1/2" [F08E4] | 3/4" [F08E6] | 1" [F08E8] |
|
Swivel Assembly (PEX x FPT - Straight) |
|||
| 3/8" x 1/2" [F04E34] | 1/2" x 1/2" [F04E44] | ||
|
Swivel Assembly (PEX x Female Flare Swivel) |
|||
| 3/8" x 3/8" [F12E33] | 1/2" x 1/2" [F12E44] | ||
|
Tee (PEX x PEX x Female NPT) |
|||
| 1/2" x 1/2" x 1/8" [F65E441] | |||
|
Tee (PEX x PEX x PEX) |
|||
| 3/8" x 3/8" x 3/8" [F06E333] | 3/8" x 3/8" x 1/2" [F06E334] | 1/2" x 3/8" x 3/8" [F06E433] | 1/2" x 3/8" x 1/2" [F06E434] |
| 1/2" x 1/2" x 3/8" [F06E443] | 1/2" x 1/2" x 1/2" [F06E444] | 1/2" x 1/2" x 3/4" [F06E446] | 3/4" x 1/2" x 1/2" [F06E644] |
| 3/4" x 1/2" x 3/4" [F06E646] | 3/4" x 3/4" x 3/8" [F06E663] | 3/4" x 3/4" x 1/2" [F06E846] | 3/4" x 3/4" x 3/4" [F06E666] |
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1/2" x 3/4" [F06E846] | 1" x 1/2" x 1" [F06E848] | 1" x 3/4" x 1/2" [F06E864] |
| 1" x 3/4" x 3/4" [F06E866] | 1" x 1" x 1/2" [F06E868] | 1" x 1" x 3/4" [F06E886] | 1" x 1" x 1" [F06E888] |
|
Tee Adapter (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1" x 3/4" [F06E884] | ||
|
Termination Elbow (PEX x Termination) |
|||
| 3/8" x 1/2" [F20E34] | 1/2" x 1/2" [F20E44] | ||
|
Termination Elbow Assy (PEX x Termination) |
|||
| 3/8" x 1/2" [F21E34] | 1/2" x 1/2" [F21E44] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
from bearing the NSF Mark. The NSF Mark will appear on the box containing
the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings+ ˘ § ± [G] |
MLTPL |
|
CSA B137.5 |
|
Adapter (PEX x Faucet) |
|||
| 3/8" (F108E3) | 1/2" (F108E4) | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
± These fittings are NSF Certified faucet components. The assembly of components does not
constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if
the assembled faucet appears in NSF Listing.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
|
ASTM F877 |
|
Branch Reducing Tees |
|||
| 3/4" x 3/4" x 1/2" [F208E664] | 1" x 1" x 1/2" [F208E884] | 1" x 1" x 3/4" [F208E886] | 1 1/4" x 1 1/4" x 3/4" [F208E10106] |
| 1 1/4" x 1 1/4" x 1" [F208E10108] | 1 1/2" x 1 1/2" x 1" [F208E12128] | 1 1/2" x 1 1/2" x 1 1/4" [F208E121210] | 2" x 2" x 1" [F208E16168] |
| 2" x 2" x 1 1/4" [F208E161610] | 2" x 2" x 1 1/2" [F208E161612] | ||
|
Branch and Run Red Tees |
|||
| 3/4" x 1/2" x 1/2" [F208E644] | 1" x 3/4" x 3/4" [F208E866] | 1 1/4" x 3/4" x 1" [F208E1068] | 1 1/4" x 1" x 1" [F208E1088] |
| 1 1/2" x 3/4" x 1" [F208E1268] | 1 1/2" x 1" x 1" [F208E1288] | 1 1/2" x 1 1/4" x 1" [F208E12108] | 1 1/2" x 1 1/4" x 1 1/4" [F208E121010] |
| 2" x 1 1/2" x 1" [F208E16128] | 2" x 1 1/2" x 1 1/4" [F208E161210] | 2" x 1 1/4" x 1 1/4" [F208E161010] | 2" x 1 1/2" x 1 1/2" [F208E161212] |
|
Bullhead Tees |
|||
| 1/2" x 1/2" x 3/4" [F208E446] | 3/4" x 3/4" x 1" [F208E668] | ||
|
Copper Adapters |
|||
| 1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) [F97E43] | 1/2" x 1/2" F2080 C Female (Sweat) [F98E44] | 5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E58] | 3/4" x 1" F2080 C Female (Sweat) [F98E68] |
| 3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) [F97E66] | 3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E68] | 1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E88] | 1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [F97E810] |
| 1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [F97E1010] | 1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) [F97E1012] | 1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1212] | 1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1216] |
| 2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1616] | 2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) [F97E1620] | ||
|
Couplings |
|||
| 3/8" x 3/8" [F95B33]E | 1/2" x 1/2" [F95E44] | 3/4" x 3/4" [F95E66] | 5/8" X 5/8" [F95E55] |
| 1" x 1" [F95E88] | 1 1/4" x 1 1/4" [F95E1010] | 1 1/2" x 1 1/2" [F95E1212] | 2" x 2" [F95E1616] |
|
Drop Ear Elbow - ELOC Dual MPT/Copper |
|||
| 1/2" x 1/2" MPT or 1/2" C Female [F210E44] | 3/4" x 3/4" MPT or 1/2" C Female [F210E66] | ||
|
Drop Ear Elbow - ELOC to FPT |
|||
| 1/2" x 1/2" [F212E44] | 3/4" x 3/4" [F212E66] | 1" x 1" [F212E88] | |
|
Dual MPT/Copper Adapters |
|||
| 3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E34] | 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E44] | 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E54] | 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) [F96E66] |
| 1" F2080 x 1" MPT or 3/4" C Female (Sweat) [F96E88] | 1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) [F96E1010] | 1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) [F96E1212] | 2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) [F96E1616] |
|
Elbow - ELOC to Copper (Male or Female) |
|||
| 1/2" x 1/2" C Male or 3/8" C Female [F215E44] | 1/2" x 3/4" C Female [F215E46] | 1/2" x 3/4" C Male or 1/2" C Female [F215E46] | 3/4" x 1" C Male or 3/4" C Female [F215E68] |
| 3/4" x 3/4" C Male or 1/2" C Female [F215E66] | |||
|
Elbows |
|||
| 1/2" x 1/2" [F209E44] | 3/4" x 3/4" [F209E66] | 1" x 1" [F209E88] | 1 1/4" x 1 1/4" [F209E10] |
| 1 1/2" x 1 1/2" [F209E12] | 2" x 2" [F209E16] | ||
|
Female Adapters |
|||
| 1/2" F2080 x 1/2" FPT [F99E44] | 3/4" F2080 x 3/4" FPT [F99E66] | 1" F2080 x 1" FPT [F99E88] | |
|
Female Swivel Adapters |
|||
| 1/2" F2080 x 1/2" NPS Female Swivel [F94E44] | 3/4" F2080 x 3/4" NPS Female Swivel [F94E66] | ||
|
Plugs |
|||
| 1/2" [F103E4] | 3/4" [F103E6] | 1" [F103E8] | 1 1/4" [F103E10] |
|
Reducing Couplings |
|||
| 3/4" x 1/2" [F95E64] | 1" x 3/4" [F95E86] | 1 1/4" x 1" [F95E108] | 1 1/2" x 1" [F95E128] |
| 1 1/2" x 1 1/4" [F95E1210] | 2" x 1" [F95E168] | 2" x 1 1/4" [F95E1610] | 2" x 1 1/2" [F95E1612] |
|
Run Reducing Tees |
|||
| 1" x 3/4" x 1" [F208E868] | 1 1/2" x 1" x 1 1/2" [F208E12812] | 2" x 1 1/4" x 2" [F208E161016] | 2" x 1/2" x 2" [F208E161216] |
| 1 1/2" x 1 1/4" x 1 1/2" [F208E121012] | 1 1/4" x 1" x 1 1/4" [F208E10810] | 3/4" x 1/2" x 3/4" [F208E646] | |
|
Straight Tees |
|||
| 1/2" x 1/2" x 1/2" [F208E444] | 3/4" x 3/4" x 3/4" [F208E666] | 1" x 1" x 1" [F208E888] | 1 1/4" x 1 1/4" x 1 1/4" [F208E10] |
| 1 1/2" x 1 1/2" x 1 1/2" [F208E12] | 2" x 2" x 2" [F208E16] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
|
CSA B137.5 |
|
Adapter (PEX x Female NPT) |
|||
| 1/2" x 3/4" [F112E44] | 1/2" x 3/4" [F112E46] | 5/8" x 3/4" [F112E56] | 3/4" x 1/2" [f112E64] |
| 3/4" x 3/4" [F112E66] | 3/4" x 1" [F112E68] | 1" x 3/4" [F112E86] | 1" x 1" [F112E88] |
| 1 1/4" x 1 1/4" [F112E1010] | 1 1/2" x 1 1/2" [F112E1212] | 2" x 2" [F112E1616] | |
|
Adapter (PEX x Female Sweat CU) |
|||
| 3/8" x 1/2" [F105E34] | 1/2" x 1/2" [F105E44] | 1/2" x 3/4" [F105E46] | 5/8" x 1/2" [F105E54] |
| 5/8" x 3/4" [F105E56] | 3/4" x 1/2" [F105E64] | 3/4" x 3/4" [F105E66] | 3/4" x 1" [F105E68] |
| 1" x 1" [F105E88] | 1 1/4" x 1 1/4" [F105E1010] | 1 1/2" x 1 1/2" [F105E1212] | 2" x 2" [F105E1616] |
|
Adapter (PEX x Male CU) |
|||
| 3/8" x 1/2" [F80E34] | 1/2" x 1/2" [F80E44] | 1/2" x 3/4" [F80E46] | 5/8" x 1/2" [F80E54] |
| 5/8" x 3/4" [F80E56] | 3/4" x 1/2" [F80E64] | 3/4" x 3/4" [F80E66] | 3/4" x 1" [F80E68] |
| 1" x 1" [F80E88] | 1 1/4" x 1 1/4" [F80E1010] | 1 1/4" x 1 1/4" [F88E1010] | 1 1/2" x 1 1/2" [F80E1212] |
| 1 1/2" x 1 1/2" [F88E1212] | 2" x 2" [F80E1616] | 2" x 2" [F88E1616] | |
|
Coupling |
|||
| 3/8" x 3/8" [F87E33] | 3/8" x 1/2" [F87E43] | 1/2" x 1/2" [F87E44] | 5/8" x 5/8" [F87E55] |
| 1/2" x 3/4" [F87E64] | 3/4" x 3/4" [F87E66] | 3/4" x 1" [F87E66] | 1" x 1" [F87E88] |
| 2" x 2" [F87E1616] | |||
|
Elbow (PEX x F Sweat) |
|||
| 3/4" x 3/4" [F315E66] | |||
|
Elbow (PEX x M Sweat) |
|||
| 3/4" x 3/4" [F314E66] | |||
|
Elbow (PEX x MNPT) |
|||
| 1/2" x 1/2" [F322E44] | |||
|
Elbow (PEX x PEX) |
|||
| 1/2" x 1/2" [F307E44] | 3/4" x 3/4" [F307E66] | 1" x 1" [F307E88] | |
|
Male Pipe Adapter |
|||
| 3/8" x 1/2" [F88E34] | 1/2" x 1/2" [F88E44] | 1/2" x 3/4" [F88E46] | 5/8" x 3/4" [F88E56] |
| 3/4" x 1/2" [F88E64] | 3/4" x 3/4" [F88E66] | 3/4" x 1" [F88E68] | 1" x 3/4" [F88E86] |
| 1" x 1" [F88E88] | |||
|
PEX-PB Transition |
|||
| 1/2" x 1/2" [F107E44] | 3/4" x 3/4" [F107E66] | ||
|
PEX-PE Transition |
|||
| 1" x 3/4" [F111E86] | 1" x 1" [F111E88] | ||
|
PEX-R20 Thread Adapter |
|||
| 3/4" x 3/4" [F131E66] | |||
|
Plug (PEX) |
|||
| 3/8" [F106E3] | 1/2" [F106E4] | 3/4" [F106E6] | 1" [F106E8] |
|
Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 1/2" [F306E444] | 1/2" x 1/2" x 3/4" [F306E446] | 3/4" x 1/2" x 1/2" [F306E644] | 3/4" x 1/2" x 3/4" [F306E646] |
| 3/4" x 3/4" x 1/2" [F306E664] | 3/4" x 3/4" x 3/4" [F306E666] | 3/4" x 3/4" x 1" [F306E668] | 1" x 3/4" x 3/4" [F306E866] |
| 1" x 1" x 1/2" [F306E884] | 1" x 1" x 3/4" [F306E886] | 1" x 1" x 1" [F306E888] | |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings^ ˘ § +++ [G] |
MLTPL |
|
CSA B137.5 |
|
Copper Adapters |
|||
| 1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) (F97E43) | 1/2" x 1/2" F2080 C Female (Sweat) (F98E44) | 5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (F97E58) | 3/4" x 1" F2080 C Female (Sweat) (F98E68) |
| 3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) (F97E66) | 3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (F97E68) | 1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (F97E88) | 1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) (F97E810) |
| 1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) (F97E1010) | 1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) (F97E1012) | 1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (F97E1212) | 1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (F97E1216) |
| 2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (F97E1616) | 2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) (F97E1620) | ||
|
Couplings |
|||
| 3/8" x 3/8" (F95E33) | 1/2" x 1/2" (F95E44) | 3/4" x 3/4" (F95E66) | 5/8" X 5/8" (F95E55) |
| 1" x 1" (F95E88) | 1 1/4" x 1 1/4" (F95E1010) | 1 1/2" x 1 1/2" (F95E1212) | 2" x 2" (F95E1616) |
|
Dual MPT/Copper Adapters |
|||
| 3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (F96E34) | 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (F96E44) | 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (F96E54) | 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) (F96E66) |
| 1" F2080 x 1" MPT or 3/4" C Female (Sweat) (F96E88) | 1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) (F96E1010) | 1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) (F96E1212) | 2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) (F96E1616) |
|
Female Adapters |
|||
| 1/2" F2080 x 1/2" FPT (F99E44) | 3/4" F2080 x 3/4" FPT (F99E66) | 1" F2080 x 1" FPT (F99E88) | |
|
Female Swivel Adapters |
|||
| 1/2" F2080 x 1/2" NPS Female Swivel (F94E44) | 3/4" F2080 x 3/4" NPS Female Swivel (F94E66) | ||
|
Plugs |
|||
| 1/2" (F103E4) | 3/4" (F103E6) | 1" (F103E8) | 1 1/4" (F103E10) |
|
Reducing Couplings |
|||
| 3/4" x 1/2" (F95E64) | 1" x 3/4" (F95E86) | 1 1/4" x 1" (F95E108) | 1 1/2" x 1" (F95E128) |
| 1 1/2" x 1 1/4" (F95E1210) | 2" x 1" (F95E168) | 2" x 1 1/4" (F95E1610) | 2" x 1 1/2" (F95E1612) |
^ The E can be substituted with an B in the model designations. Only E model designations
comply with Annex G Listed under Potable Water.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* +++ |
Brass (3) Places |
SWIVEL DROP EAR |
ASTM F877 |
|
Elbow[G] |
|||
| 1/2" x 1/2" [F82E44] | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
* Accepted by NSF for use in residential and commercial construction,
including manufactured housing.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||
Fittings§ +++ |
Brass |
Failsafe Plus |
ASTM F2434 |
|
Adapter[G] |
|||
| 1/2" x 1/2" [FP01E44] | 3/4" x 3/4" [FP01E66] | 1" x 3/4" [FP01E86] | 1" x 1" [FP01E88] |
| 1 1/4" x 1" [FP01E108] | 1 1/4" x 1 1/4" [FP01E1010] | ||
|
Assembly Adapter[G] |
|||
| 3/4" x 3/4" [FP10E66] | 1/2" x 1/2" [FP10E44] | 1" x 1" [FP10E88] | 1 1/4" x 1 1/4" [FP10E1010] |
|
Assembly Adapter Elbow (Pex-Al-Pex)[G] |
|||
| 3/4" x 1/2" [FP07E64] | 1 1/4" x 1 1/4" [FP07E1010] | ||
|
Assembly Adapter Pipe Thread (Pex-Al-Pex x Female)[G] |
|||
| 1/2" x 1/2" [FP09E44] | 1 1/4" x 3/4" [FP09E106] | ||
|
Assembly Adapter Pipe Thread (Pex-Al-Pex x Male)[G] |
|||
| 1 1/4" x 1" [FP09E108] | |||
|
Assembly Adapter Plug (Pex-Al-Pex)[G] |
|||
| 1 1/4" [FP08E10] | |||
|
Assembly Adapter Sweat (Pex-Al-Pex x FSWT)[G] |
|||
| 1/2" x 1/2" [FP19E44] | 1/2" x 3/4" [FP19E46] | 3/4" x 3/4" [FP19E66] | 1" x 1" [FP19E88] |
|
Assembly Adapter Sweat (Pex-Al-Pex x MSWT)[G] |
|||
| 1/2" x 1/2" [FP02E44] | 1/2" x 3/4" [FP02E46] | 3/4" x 3/4" [FP02E66] | 1" x 1" [FP02E88] |
| 1 1/4" x 1" [FP02E108] | 1 1/4" x 1 1/4" [FP02E1010] | ||
|
Assembly Adapter Sweat Elbow (Pex-Al-Pex x FSWT)[G] |
|||
| 1/2" x 1/2" [FP36E44] | 1/2" x 3/4" [FP36E46] | 3/4" x 3/4" [FP36E66] | |
|
Assembly Adapter Sweat Elbow (Pex-Al-Pex x MSWT)[G] |
|||
| 1/2" x 1/2" [FP37E44] | 1/2" x 3/4" [FP37E46] | 3/4" x 3/4" [FP37E66] | |
|
Assembly Elbow[G] |
|||
| 1/2" x 1/2" [FP07E44] | 3/4" x 3/4" [FP07E66] | 1" x 1" [FP07E88] | |
|
Assembly Tee (Pex-Al-Pex)[G] |
|||
| 1/2" x 1/2" x 1/2" [FP06E444] | 1/2" x 1/2" x 3/4" [FP06E446] | 3/4" x 1/2" x 1/2" [FP06E644] | 3/4" x 1/2" x 3/4" [FP06E646] |
| 3/4" x 3/4" x 1/2" [FP06E664] | 3/4" x 3/4" x 3/4" [FP06E666] | 1" x 3/4" x 3/4" [FP06E886] | 1" x 1" x 1/2" [FP06E884] |
| 1" x 1" x 3/4" [FP06E886] | 1" x 1" x 1" [FP06E888] | 1 1/4" x 1" x 1" [FP06E1088] | 1 1/4" x 1 1/4" x 1/2" [FP06E10104] |
| 1 1/4" x 1 1/4" x 3/4" [FP06E10106] | 1 1/4" x 1 1/4" x 1" [FP06E10108] | 1 1/4" x 1 1/4" x 1 1/4" [FP06E101010] | |
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||
Fittings˘ § +++ |
Brass |
Failsafe Plus |
CSA B137.5 |
|
Adapter[G] |
|||
| 1/2" x 1/2" [FP01E44] | 3/4" x 3/4" [FP01E66] | 1" x 3/4" [FP01E86] | 1 " x 1" [FP01E88] |
| 1 1/4" x 1" [FP01E108] | 1 1/4" x 1 1/4" [FP01E1010] | ||
|
Assembly Adapter[G] |
|||
| 1/2" x 1/2" [FP10E44] | 3/4" x 3/4" [FP10E66] | 1" x 1" [FP10E88] | 1 1/4" x 1 1/4" [FP10E1010] |
|
Assembly Adapter Elbow (Pex-Al-Pex)[G] |
|||
| 3/4" x 1/2" [FP07E64] | 1 1/4" x 1 1/4" [FP07E1010] | ||
|
Assembly Adapter Pipe Thread (Pex-Al-Pex x Female)[G] |
|||
| 1/2" x 1/2" [FP09E44] | 1 1/4" x 3/4" [FP09E106] | ||
|
Assembly Adapter Pipe Thread (Pex-Al-Pex x Male)[G] |
|||
| 1 1/4" x 1" [FP09E108] | |||
|
Assembly Adapter Plug (Pex-Al-Pex)[G] |
|||
| 1 1/4" [FP08E10] | |||
|
Assembly Adapter Sweat (Pex-Al-Pex FSWT)[G] |
|||
| 1/2" x 1/2" [FP19E44] | 1/2" x 3/4" [FP19E46] | 3/4" x 3/4" [FP19E66] | 1" x 1" [FP19E88] |
|
Assembly Adapter Sweat (Pex-Al-Pex MSWT)[G] |
|||
| 1/2" x 1/2" [FP02E44] | 1/2" x 3/4" [FP02E46] | 3/4" X 3/4" [FP02E66] | 1" x 1" [FP02E88] |
| 1 1/4" x 1" [FP02E108] | 1 1/4" x 1 1/4" [FP02E1010] | ||
|
Assembly Adapter Sweat Elbow (Pex-Al-Pex FSWT)[G] |
|||
| 1/2" x 1/2" [FP36E44] | 1/2" x 3/4" [FP36E46] | 3/4" x 3/4" [FP36E66] | |
|
Assembly Adapter Sweat Elbow (Pex-Al-Pex MSWT)[G] |
|||
| 1/2" x 1/2" [FP37E44] | 1/2" x 3/4" [FP37E46] | 3/4" x 3/4" [FP37E66] | |
|
Assembly Elbow[G] |
|||
| 1/2" x 1/2" [FP07E44] | 3/4" x 3/4" [FP07E66] | 1" x 1" [FP07E88] | |
|
Assembly Tee (Pex-Al-Pex)[G] |
|||
| 1/2" x 1/2" x 1/2" [FP06E444] | 1/2" x 1/2" x 3/4" [FP06E446] | 3/4" x 1/2" x 1/2" [FP06E644] | 3/4" x 1/2" x 3/4" [FP06E646] |
| 3/4" x 3/4" x 1/2" [FP06E664] | 3/4" x 3/4" x 3/4" [FP06E666] | 1" x 3/4" x 3/4" [FP06E886] | 1" x 1" x 1/2" [FP06E884] |
| 1" x 1" x 3/4" [FP06E886] | 1" x 1" x 1" [FP06E888] | 1 1/4" x 1" x 1" [FP06E1088] | 1 1/4" x 1 1/4" x 1/2" [FP06E10104] |
| 1 1/4" x 1 1/4" x 3/4" [FP06E10106] | 1 1/4" x 1 1/4" x 1" [FP06E10108] | 1 1/4" x 1 1/4" x 1 1/4" [FP06E101010] | |
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||
Fittings˘ § +++ [G] |
MLTPL |
Failsafe Compression |
ASTM F1974 |
|
Adapter, Plug |
|||
| 1/2" [F141E4] | 3/4" [F141E6] | ||
|
Barb x Barb Coupler |
|||
| 1/2" T1 x 1/2" T1 [F144E44] | 3/4" T1 x 1/2" T1 [F144E64] | 3/4" T1 x 3/4" T1 [F144E66] | |
|
Barb x Copper Compression Adapter |
|||
| 1/2" T1 x 1/2" [F143E44] | 3/4" T1 x 3/4" [F143E66] | 1" T1 x 1" [F143E88] | |
|
Barb x Female Adapter |
|||
| 1/2" T1 x 1/2" FSW [F138E44] | 3/4" T1 x 3/4" FSW [F138E66] | ||
|
Barb x MPT Adapter |
|||
| 1/2" T1 x 1/2" [F142E44] | 1/2" T1 x 3/4" [F142E46] | 3/4" T1 x 3/4" [F142E66] | |
|
Barb x Male Adapter |
|||
| 1/2" T1 x 1/2" MSWT [F145E44] | 3/4" T1 x 3/4" MSWT [F145E66] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
Failsafe Compression |
CSA B137.10 |
|
Adapter, Plug |
|||
| 1/2" [F141E4] | 3/4" [F141E6] | ||
|
Barb x Barb Coupler |
|||
| 1/2" T1 x 1/2" T1 [F144E44] | 3/4" T1 x 1/2" T1 [F144E64] | 3/4" T1 x 3/4" T1 [F144E66] | |
|
Barb x Copper Compression Adapter |
|||
| 1/2" T1 x 1/2" [F143E44] | 3/4" T1 x 3/4" [F143E66] | ||
|
Barb x Female Adapter |
|||
| 1/2" T1 x 1/2" FSW [F138E44] | 3/4" T1 x 3/4" FSW [F138E66] | ||
|
Barb x MPT Adapter |
|||
| 1/2" T1 x 1/2" [F142E44] | 1/2" T1 x 3/4" [F142E46] | 3/4" T1 x 3/4" [F142E66] | |
|
Barb x Male Adapter |
|||
| 1/2" T1 x 1/2" MSWT [F145E44] | 3/4" T1 x 3/4" MSWT [F145E66] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
|
ASTM F1974 |
|
Adapter, Plug |
|||
| 1/2" [F141E4] | 3/4" [F141E6] | ||
|
Barb x Barb Coupler |
|||
| 1/2" T1 x 1/2" T1 [F144E44] | 3/4" T1 x 1/2" T1 [F144E64] | 3/4" T1 x 3/4" T1 [F144E66] | |
|
Barb x Copper Compression Adapter |
|||
| 1/2" T1 x 1/2" [F143E44] | 3/4" T1 x 3/4" [F143E66] | ||
|
Barb x Female Adapter |
|||
| 1/2" T1 x 1/2" FSW [F138E44] | 3/4" T1 x 3/4" FSW [F138E66] | ||
|
Barb x MPT Adapter |
|||
| 1/2" T1 x 1/2" [F142E44] | 1/2" T1 x 3/4" [F142E46] | 3/4" T1 x 3/4" [F142E66] | |
|
Barb x Male Adapter |
|||
| 1/2" T1 x 1/2" MSWT [F145E44] | 3/4" T1 x 3/4" MSWT [F145E66] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
MLTPL |
|
CSA B137.10 |
|
Adapter, Plug |
|||
| 1/2" [F141E4] | 3/4" [F141E6] | ||
|
Barb x Barb Coupler |
|||
| 1/2" T1 x 1/2" T1 [F144E44] | 3/4" T1 x 1/2" T1 [F144E64] | 3/4" T1 x 3/4" T1 [F144E66] | |
|
Barb x Copper Compression Adapter |
|||
| 1/2" T1 x 1/2" [F143E44] | 3/4" T1 x 3/4" [F143E66] | ||
|
Barb x Female Adapter |
|||
| 1/2" T1 x 1/2" FSW [F138E44] | 3/4" T1 x 3/4" FSW [F438E66] | ||
|
Barb x MPT Adapter |
|||
| 1/2" T1 x 1/2" [F142E44] | 1/2" T1 x 3/4" [F142E46] | 3/4" T1 x 3/4" [F142E66] | |
|
Barb x Male Adapter |
|||
| 1/2" T1 x 1/2" MSWT [F145E44] | 3/4" T1 x 3/4" MSWT [F145E66] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.@ ˘ § ++ [G] |
Brass |
|
ASTM F1960 |
|
Adapter (PEX x Manifold) |
|||
| 3/8" [F104E34] | 1/2" [F104E44] | ||
@ Certified as a component of a manifold with a maximum of 24 adapters per liter.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
Brass |
Rehau Everloc® |
ASTM F877/F2080 |
|
Branch & Red Run Tee |
|||
| 3/4" x 1/2" x 1/2" (260637-101) | 1" x 3/4" x 3/4" (260697-101) | 1 1/4" x 3/4" x 1" (235677-101) | 1 1/4" x 1" x 1" (235657-101) |
| 1 1/2" x 3/4" x 1" (235887-101) | 1 1/2" x 1" x 1" (235877-101) | 1 1/2" x 1 1/4" x 1" (235867-101) | 1 1/2" x 1 1/4" x 1 1/4" (235857-101 |
| 2" x 1 1/4" x 1 1/4" (236097-101) | 2" x 1 1/2" x 1" (236087-101) | 2" x 1 1/2" x 1 1/4" (236077-101) | 2" x 1 1/2" x 1 1/2" (236067-101) |
|
Branch Reducing Tee |
|||
| 3/4" x 3/4" x 1/2" (260627-101) | 1" x 1" x 1/2" (260727-101) | 1" x 1" x 3/4" (260707-101) | 1 1/4" x 1 1/4" x 3/4" (235627-101) |
| 1 1/4" x 1 1/4" 1" (235617-101) | 1 1/2" x 1 1/2" x 1" (235827-101) | 1 1/2" x 1 1/2" x 1 1/4" (235817-101) | 2" x 2" x 1" (236037-101) |
| 2" x 2" x 1 1/4" (236027-101) | 2" x 2" x 1 1/2" (236017-101) | ||
|
Bullhead Tee |
|||
| 1/2" x 1/2" x 3/4" (260857-101) | 3/4" x 3/4" x 1" (260897-101) | ||
|
Copper Adapters |
|||
| 1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) [260017-101] | 1/2" x 1/2" F2080 C Female (Sweat) [260047-101] | 5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [243637-101] | 3/4" x 1" F2080 C Female (Sweat) [260807-101] |
| 3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) [260827-101] | 3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [260837-101] | 1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [260417-101] | 1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [260947-101] |
| 1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [235567-101] | 1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) [235577-101] | 1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [235767-101] | 1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [235777-101] |
| 2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [235967-101] | 2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) [235977-101] | ||
|
Couplings |
|||
| 3/8" x 3/8" [24317-101] | 1/2" x 1/2" [260227-101] | 3/4" x 3/4" [260317-101] | 5/8" X 5/8" [243627-101] |
| 1" x 1" [260427-101] | 1 1/4" x 1 1/4" [235527-101] | 1 1/2" x 1 1/2" [235727-101] | 2" x 2" [235927-101] |
|
Dual MPT/Copper Adapters |
|||
| 3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [243537-101] | 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [260237-101] | 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [243647-101] | 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) [260327-101] |
| 3/4" F2080 x 1" MPT or 3/4" C Female (Sweat) [260597-101] | 1" F2080 x 1" MPT or 3/4" C Female (Sweat) [260437-101] | 1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) [235557-101] | 1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) [235757-101] |
| 2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) [235957-101] | |||
|
Elbow |
|||
| 1/2" x 1/2" (260657-101) | 3/4" x 3/4" (260677-101) | 1" x 1" (260717-101) | 1 1/4" x 1 1/4" (235597-101) |
| 1 1/2" x 1 1/2" (235797-101) | 2" x 2" (235997-101) | ||
|
Elbow-2080 Dual MPT/Copper |
|||
| 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) Drop Ear (260737-101) | 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) (260747-101) | ||
|
Elbow-2080 to Copper |
|||
| 1/2" F2080 x 1/2" C Male (Street) or 3/8" C Female (Sweat) (260537-101) | 1/2" F2080 x 3/4" C Female (Sweat) (260557-101) | 1/2" F2080 x 3/4" C Male (Street) or 1/2" C Female (Sweat) (260757-101) | 3/4" F2080 x 1" C Male (Street) or 3/4" C Female (Sweat) (260767-101) |
| 3/4" F2080 x 3/4" C Male (Street) or 1/2" C Female (Sweat) (260817-101) | 5/8" F2080 x 1"C Male (Street) or 3/4" C Female (Sweat) (243687-101) | 5/8" F2080 x 3/4" C Male(street) or 1/2"C Female (sweat) | |
|
Plugs |
|||
| 1/2" [260087-101] | 3/4" [260397-101] | 1" [260497-101] | 1 1/4" [235267-101] |
|
Reducing Couplings |
|||
| 3/4" x 1/2" [260247-101] | 1" x 3/4" [260447-101] | 1 1/4" x 1" [235517-101] | 1 1/2" x 1" [235737-101] |
| 1 1/2" x 1 1/4" [235717-101] | 2" x 1" [235947-101] | 2" x 1 1/4" [235937-101] | 2" x 1 1/2" [235917-101] |
|
Run Reducing Tee |
|||
| 3/4" x 1/2" x 3/4" (260647-101) | 1" x 3/4" x 1" (260687-101) | 1 1/4" x 1" x 1 1/4"(235637-101) | 1 1/2" x 1" x 1 1/2"(235847-101) |
| 1 1/2" x 1 1/4" x 1 1/2" (235837-101) | 2" x 1 1/2" x 2" (236047-101) | 2" x 1 1/4" x 2" (236057-101) | |
|
Sleeves |
|||
| 3/8" [243507] | 1/2" [260077] | 5/8" [243607] | 3/4" [260877] |
| 1" [260877] | 1 1/4" [235507] | 1 1/2" [235707] | 2" [235907] |
|
Straight Tee |
|||
| 1/2" x 1/2" x 1/2" (260607-101) | 3/4" x 3/4" x 3/4" (260617-101) | 1" x 1" x 1" (260977-101) | 1 1/4" x 1 1/4" x 1 1/4" (235607-101) |
| 1 1/2" x 1 1/2" x 1 1/2" (235807-101) | 2" x 2" x 2" (236007-101) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings* + ˘ +++ [G] |
Brass (3) Places |
Viega |
ASTM F877 |
|
Adapter (PEX x PB) |
|||
| 3/8" x 3/8" [F18E33V] | 1/2" x 1/2" [F18E44V] | 3/4" X 3/4" [F18E66V] | 1" x 1" [F18E88V] |
|
Adapters (PEX x FPT) |
|||
| 3/4" x 1" [F09E68V] | |||
|
Adapters (PEX x M Sweat) |
|||
| 1/2" x 3/8" [F02E43V] | 1/2" x 1/2" [F02E44V] | ||
|
Adapters (PEX x MPT) |
|||
| 3/4" x 1/2" [F10E64V] | |||
|
Elbow (PEX x PEX) |
|||
| 3/4" x 1/2" [F07E64V] | |||
|
Male Pipe Straight Adapter (PEX x MP) |
|||
| 3/4" x 1" [F10E68V] | |||
|
Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 3/4" [F06E446V] | 3/4" x 1/2" x 3/4" [F06E646] | 3/4" x 3/4" x 1/2" [F06E664] | 1" x 1" x 3/4" [F06E886] |
|
Tee Adapter (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1" x 3/4" [F06E884] | ||
* Accepted by NSF for use in residential and commercial construction,
including manufactured housing.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ** +++ [G] |
Brass (3) Places |
Viega |
ASTM F1807 |
|
Adapter (PEX x PB) |
|||
| 3/8" x 3/8" [F18E33V] | 1/2" x 1/2" [F18E44V] | 3/4" X 3/4" [F18E66V] | 1" x 1" [F18E88V] |
|
Adapters (PEX x FPT) |
|||
| 3/4" x 1" [F09E68V] | |||
|
Adapters (PEX x M Sweat) |
|||
| 1/2" x 3/8" [F02E43V] | 1/2" x 1/2" [F02E44V] | ||
|
Adapters (PEX x MPT) |
|||
| 3/4" x 1/2" [F10E64V] | |||
|
Elbow (PEX x PEX) |
|||
| 3/4" x 1/2" [F07E64V] | |||
|
Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 3/4" [F06E446V] | 3/4" x 1/2" x 3/4" [F06E646] | 3/4" x 3/4" x 1/2" [F06E664] | 1" x 1" x 3/4" [F06E886] |
|
Tee Adapter (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1" x 3/4" [F06E884] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
from bearing the NSF Mark. The NSF Mark will appear on the box containing
the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § ** +++ [G] |
Brass (3) Places |
Viega |
CSA B137.5 |
|
Adapter (PEX x PB) |
|||
| 3/8" x 3/8" [F18E33V] | 1/2" x 1/2" [F18E44V] | 3/4" X 3/4" [F18E66V] | 1" x 1" [F18E88V] |
|
Adapters (PEX x FPT) |
|||
| 3/4" x 1" [F09E68V] | |||
|
Adapters (PEX x M Sweat) |
|||
| 1/2" x 3/8" [F02E43V] | 1/2" x 1/2" [F02E44V] | ||
|
Adapters (PEX x MPT) |
|||
| 3/4" x 1/2" [F10E64V] | |||
|
Elbow (PEX x PEX) |
|||
| 3/4" x 1/2" [F07E64V] | |||
|
Male Pipe Straight Adapter (PEX x MP) |
|||
| 3/4" x 1" [F10E68V] | |||
|
Tee (PEX x PEX x PEX) |
|||
| 1/2" x 1/2" x 3/4" [F06E446V] | 3/4" x 1/2" x 3/4" [F06E646] | 3/4" x 3/4" x 1/2" [F06E664] | 1" x 1" x 3/4" [F06E886] |
|
Tee Adapter (PEX x PEX x PEX) |
|||
| 3/4" x 3/4" x 1" [F06E668] | 1" x 1" x 3/4" [F06E884] | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
from bearing the NSF Mark. The NSF Mark will appear on the box containing
the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
*** These components require additional processing in order to be used in a
piping system. The use of these components in NSF Certified fittings
require written authorization from NSF.
Facility : Monticelli Brusati (BS), Italy
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings˘ § +++ [G] |
C69300 Brass |
 |
ASTM F877/F2080 |
|
Branch Reducing Tees |
|||
| 3/4" x 3/4" x 1/2" (F208E664) | 1" x 1" x 1/2" (F208E884) | 1" x 1" x 3/4" (F208E886) | 1 1/4" x 1 1/4" x 3/4" (F208E10106) |
| 1 1/4" x 1 1/4" x 1" (F208E10108) | 1 1/2" x 1 1/2" x 1" (F208E12128) | 1 1/2" x 1 1/2" x 1 1/4" (F208E121210) | 2" x 2" x 1" (F208E16168) |
| 2" x 2" x 1 1/4" (F208E161610) | 2" x 2" x 1 1/2" (F208E161612) | ||
|
Branch and Run Red Tees |
|||
| 3/4" x 1/2" x 1/2" (F208E644) | 1" x 3/4" x 3/4" (F208E866) | 1 1/4" x 3/4" x 1" (F208E1068) | 1 1/4" x 1" x 1" (F208E1088) |
| 1 1/2" x 3/4" x 1" (F208E1268) | 1 1/2" x 1" x 1" (F208E1288) | 1 1/2" x 1 1/4" x 1" (F208E12108) | 1 1/2" x 1 1/4" x 1 1/4" (F208E121010) |
| 2" x 1 1/2" x 1" (F208E16128) | 2" x 1 1/2" x 1 1/4" (F208E161210) | 2" x 1 1/4" x 1 1/4" (F208E161010) | 2" x 1 1/2" x 1 1/2" (F208E161212) |
|
Bullhead Tees |
|||
| 1/2" x 1/2" x 3/4" (F208E446) | 3/4" x 3/4" x 1" (F208E668) | ||
|
Elbow - ELOC to Copper (Male or Female) |
|||
| 1/2" x 1/2" C Male or 3/8" C Female (F215E44) | 1/2" x 3/4" C Female (F215E46) | 1/2" x 3/4" C Male or 1/2" C Female (F215E46) | 3/4" x 1" C Male or 3/4" C Female (F215E68) |
| 3/4" x 3/4" C Male or 1/2" C Female (F215E66) | |||
|
Elbows |
|||
| 1/2" x 1/2" (F209E44) | 3/4" x 3/4" (F209E66) | 1" x 1" (F209E88) | 1 1/4" x 1 1/4" (F209E10) |
| 1 1/2" x 1 1/2" (F209E12) | 2" x 2" (F209E16) | ||
|
Run Reducing Tees |
|||
| 3/4" x 1/2" x 3/4" (F208E646) | 1" x 3/4" x 1" (F208E868) | 1 1/4" x 1" x 1 1/4" (F208E10810) | 1 1/2" x 1 1/4" x 1 1/2" (F208E121012) |
| 1 1/2" x 1" x 1 1/2" (F208E12812) | 2" x 1/2" x 2" (F208E161216) | 2" x 1 1/4" x 2" (F208E161016) | |
|
Straight Tees |
|||
| 1/2" x 1/2" x 1/2" (F208E444) | 3/4" x 3/4" x 3/4" (F208E666) | 1" x 1" x 1" (F208E888) | 1 1/4" x 1 1/4" x 1 1/4" (F208E10) |
| 1 1/2" x 1 1/2" x 1 1/2" (F208E12) | 2" x 2" x 2" (F208E16) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
C69300 Brass |
|
CSA B137.5 |
|
Branch Reducing Tees |
|||
| 3/4" x 3/4" x 1/2" (F208E664) | 1" x 1" x 1/2" (F208E884) | 1" x 1" x 3/4" (F208E886) | 1 1/4" x 1 1/4" x 3/4" (F208E10106) |
| 1 1/4" x 1 1/4" x 1" (F208E10108) | 1 1/2" x 1 1/2" x 1" (F208E12128) | 1 1/2" x 1 1/2" x 1 1/4" (F208E121210) | 2" x 2" x 1" (F208E16168) |
| 2" x 2" x 1 1/4" (F208E161610) | 2" x 2" x 1 1/2" (F208E161612) | ||
|
Branch and Run Red Tees |
|||
| 3/4" x 1/2" x 1/2" (F208E644) | 1" x 3/4" x 3/4" (F208E866) | 1 1/4" x 3/4" x 1" (F208E1068) | 1 1/4" x 1" x 1" (F208E1088) |
| 1 1/2" x 3/4" x 1" (F208E1268) | 1 1/2" x 1" x 1" (F208E1288) | 1 1/2" x 1 1/4" x 1" (F208E12108) | 1 1/2" x 1 1/4" x 1 1/4" (F208E121010) |
| 2" x 1 1/2" x 1" (F208E16128) | 2" x 1 1/2" x 1 1/4" (F208E161210) | 2" x 1 1/4" x 1 1/4" (F208E161010) | 2" x 1 1/2" x 1 1/2" (F208E161212) |
|
Bullhead Tees |
|||
| 1/2" x 1/2" x 3/4" (F208E446) | 3/4" x 3/4" x 1" (F208E668) | ||
|
Drop Ear Elbow |
|||
| 1/2" x 1/2" FPT (F26E44) | |||
|
Elbow - ELOC to Copper (Male or Female) |
|||
| 1/2" x 1/2" C Male or 3/8" C Female (F215E44) | 1/2" x 3/4" C Female (F215E46) | 1/2" x 3/4" C Male or 1/2" C Female (F215E46) | 3/4" x 1" C Male or 3/4" C Female (F215E68) |
| 3/4" x 3/4" C Male or 1/2" C Female (F215E66) | |||
|
Elbows |
|||
| 1/2" x 1/2" (F209E44) | 3/4" x 3/4" (F209E66) | 1" x 1" (F209E88) | 1 1/4" x 1 1/4" (F209E10) |
| 1 1/2" x 1 1/2" (F209E12) | 2" x 2" (F209E16) | ||
|
Run Reducing Tees |
|||
| 3/4" x 1/2" x 3/4" (F208E646) | 1" x 3/4" x 1" (F208E868) | 1 1/4" x 1" x 1 1/4" (F208E10810) | 1 1/2" x 1" x 1 1/2" (F208E12812) |
| 1 1/2" x 1 1/4" x 1 1/2" (F208E121012) | 2" x 1/2" x 2" (F208E161216) | 2" x 1 1/4" x 2" (F208E161016) | |
|
Straight Tees |
|||
| 1/2" x 1/2" x 1/2" (F208E444) | 3/4" x 3/4" x 3/4" (F208E666) | 1" x 1" x 1" (F208E888) | 1 1/4" x 1 1/4" x 1 1/4" (F208E10) |
| 1 1/2" x 1 1/2" x 1 1/2" (F208E12) | 2" x 2" x 2" (F208E16) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Fittings˘ § +++ [G] |
C69300 |
|
ASTM F1807 |
|
Drop Ear Elbow |
|||
| 1/2" x 1/2" FPT (F26E44) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold˘ § +++ [G] |
C69300 Brass |
|
ASTM F1807 |
| One 3/4" Inlet x Three 1/2" Outlets (F180E604-3) | One 3/4" Inlet x Four 1/2" Outlets (F180E604-4) | Two 3/4" Inlet x Three 1/2" Outlets (F180E664-3) | Two 3/4" Inlet x Four 1/2" Outlets (F180E664-4) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Manifold˘ § +++ [G] |
C69300 Brass |
|
CSA B137.5 |
| One 3/4" Inlet x Three 1/2" Outlets (F180E604-3) | One 3/4" Inlet x Four 1/2" Outlets (F180E604-4) | Two 3/4" Inlet x Three 1/2" Outlets (F180E664-3) | Two 3/4" Inlet x Four 1/2" Outlets (F180E664-4) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 1038
Processing time was 2 seconds